SV7102 [SAVITECH]
Low Voltage, High-Speed USB 2.0 Switch;型号: | SV7102 |
厂家: | SAVITECH |
描述: | Low Voltage, High-Speed USB 2.0 Switch |
文件: | 总8页 (文件大小:291K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SV7102
SV7102
Low Voltage, High-Speed USB 2.0 Switch
Revision v0.98
SAVITECH Corporation
SV7102
www.savitech-ic.com
1
Savitech
SV7102
SV7102
Low Voltage, High-Speed USB 2.0 Switch
Description
Features
The SV7102 is a high-bandwidth switch specially
Wide operating range: +1.65V ~ +5.5V
USB2.0 (Full Speed) and
designed for switching high-speed USB 2.0 signals
in handset, portables and digital consumer
applications. It offers seamless switching with
extreme low attenuation designed for applications
requiring low bit-to-bit skew and high channel-to-
channel noise isolation, and is fully comppliant with
industry high-speed USB 2.0 standard.
USB 2.0 (High Speed),
legacy USB 1.1
compliant
Wide bandwidth: 810MHz (typ.)
9ns switching transition time
Cross-talk: -45dB at 480Mbps
Off isolation: -40dB at 480Mbps
Low ON-resistance: RON= 4 (typ.)
Extreme low signal propagation delay
Low power consumption
The SV7102 switch features wide bandwidth that
allows minimum edge and phase distortion while
signals passing through. The SV7102 is acting as a
multiplex that multiplexes twol outputs of a USB host
device to one of two corresponding outputs fro
connecting to an external USB device. The switch is
bidirectional, so it can be used as a demultiplex too.
Pin Configuration
Block diagram
10L- WQFN 1.8x1.3x0.6mm
1
2
3
10
9
Y+
SEL
VDD
OE
D+
Y-
8
GND
M-
4
5
7
6
M+
D-
MSOP-10
Order codes
Part number
Operation temperature range
-40°C, +85°C
Packing
Package
SV7102-10WY-TR3
SV7102-10MP-TR3
Tape & Reel, 3000pcs
WQFN-10
-40°C, +85°C
MSOP-10 Tape & Reel, 3000pcs
SV7102
www.savitech-ic.com
Savitech
SV7102
Truth Table
Pin description
NAME
OE
DESCRIPTION
Active LOW, Output enable
Select input
SEL
X
OE
H
Y+
Hi-Z
M+
Y-
Hi-Z
M-
SEL
L
L
Y(+/-)
M&D(+/-)
COM port
H
L
D+
D-
I/O for USB data path (port 1 and
port 2)
Absolute maximum ratings
Parameter
Value
Unit
Storage Temperature
-60 to +150
-0.5 to +7
-0.5 to +7
120
°C
Supply Votage to Ground Potential
DC Input Voltage
V
V
DC Output Current
mA
W
V
Power Dissipation
0.5
ESD Susceptibility: HBM
ESD Susceptibility: MM
8000
400
V
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions
not implied.
DC Electrical Characteristics for USB2.0 Switching over Operation Range
(TA=-40°C to 85°C, VDD=+3.0~4.4V)
Parameters Description
Test Conditions(1)
Min.
0.4
Typ.(2) Max. Units
VIH
VIL
VIK
IIH
Input HIGH Voltage
Guaranteed HIGH Level
Guaranteed HIGH level
VDD=Max., IIK=-18mA
VDD=Max., VIH=VDD
VDD
0.35
V
V
Input LOW Voltage
Clamp Diode Voltage
Input HIGH Current
Input LOW Current
On-Resistance(3)
VSS
-0.74
0.45
V
±1
±1
uA
uA
ꢀ
IIL
VDD=Max., VIL=GND
RON
4
VDD=Min., -0.4VꢀVinꢀ1.0V, ION=-40mA
ꢀ
ꢀ
RFLAT(ON)
ꢁRON
IOZ
On-Resistance Flatness(3)
0.6
VDD=Min., -0.4VꢀVinꢀ1.0V, ION=-40mA
VDD=Min., -0.4VꢀVin ꢀ1.0V, ION=-40mA
On-Resistance match
form center ports to any
other port(3)
1
I/O leakage current when VDD=+4.3V, Vin=0 to +3.6V, switch=off,
port is off OE=HIGH
±1
uA
Notes:
1. For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. VDD=+3.0~4.4V, TA = 25°C ambient and maximum loading.
3. Measured by the voltage drop between Y and Dx pin at indicated current through the On-Resistance is determined by the lower of
the voltages on the two (Y, Dx) pins.
SV7102
www.savitech-ic.com
Savitech
SV7102
Power Supply Characteristics (VDD=+4.5~5.5V)
Parameters
ICC
Description
Test Conditions(1)
Min. Typ. Max.
Units
uA
VDD=Max., OE=1.4V~VDD
VDD=Max., VSEL=+1.3V~2.1V
0.1
1
1
Quiescent Power Supply Current
uA
Power Supply Characteristics (VDD=+3.0~4.4V)
Parameters
Description
Test Conditions(1)
Min. Typ. Max.
0.55
110 180
Units
uA
VDD=Max., OE=1.4V~VDD
VDD=Max., VSEL=+1.3V~2.1V
1
ICC
Quiescent Power Supply Current
uA
Notes:
1.For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type
Dynamic Electrical Characteristics Over the Operating Range
Parameters(3) Description
Test Conditions(1)
Min.
Typ.(2)
-45
Max.
Units
dB
XTALK
OIRR
BW
Crosstalk
RL=50ꢀ, f=240MHz
OFF Isolation
-3dB Bandwidth
-0.5dB Bandwidth
-40
dB
RL=50ꢀ
RL=50ꢀ
810
MHz
MHz
BW
270
Notes:
1.For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2.Typical values are at VDD=+3.3V, TA=25°C ambient and maximum loading.
3.This parameter is determined by device characterization but is not production tested.
Switching Characteristics
Test Conditions(1)
VDD=3.0 ~ 4.4V
VDD=3.0 ~ 4.4V
VDD=4.5 ~ 5.5V
Parameters
tPD
Description
Min.
Typ.
0.25
2.5
30
Max.
Units
ns
Propagation Delay(2,3)
us
tPZH, tPZL
Line Enable Time - SEL, OE to D(+/-), M(+/-)
ns
tPHZ, tPLZ
tSKc-c
Line Disable Time - SEL, OE to D(+/-), M(+/-) VDD=3.0 ~ 4.4V
9
ns
Output skew, channel-to-channel(2)
VDD=3.0 ~ 4.4V
5
ps
Output skew, bit-to-bit (opposite transition of
(2)
tSKb-b
VDD=3.0 ~ 4.4V
10
ps
the same output (tPHL-tPLH
)
Notes:
1.For max. or min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2.Guaranteed by design.
3.The switch contributes no propagational delay other than the RC delay of the On-Resistance of the switch and the load capacitance. The time
constant for the switch alone is of the order of 0.25ns for 10pF load. Since this time constant is much smaller than the rise/fall times of typical
driving signals, it adds very little propagational delay to the system. Propagational delay of the switch when used in a system is determined by
the driving circuit on the driving side of the switch and its interactions with the load on the driven side.
SV7102
www.savitech-ic.com
Savitech
SV7102
Eye Diagrams
480-Mbps USB signal with NO port (PASS)
480-Mbps USB signal with NC port (PASS)
480-Mbps USB signal source (PASS)
SV7102
www.savitech-ic.com
Savitech
SV7102
Dimension in MM
Recommended soldering land pattern for PCB
Symbol
Min.
0.55
0.00
0.423
---
Mom.
0.60
---
Max.
0.65
0.05
0.523
---
A
A1
A2
A3
b
---
0.127REF
0.25
1.8
0.15
1.75
1.25
---
0.25
1.85
1.35
D
E
1.3
e
0.4BSC
0.40
0.40
0.50
---
L
0.35
0.35
0.45
-12
0.45
0.45
0.55
0
L1
L2
ꢀ
ccc
M
Burr
---
0.08
---
---
---
0.05
0.06
0.00
0.03
SV7102
www.savitech-ic.com
Savitech
SV7102
MSOP-10 MECHANICAL DATA
Dimension in MM
Mom. Max.
Dimension in Inch
Symbol
Min.
0.81
0.05
0.75
0.17
0.13
2.90
4.75
2.90
Min.
Mom.
0.040
Max.
A
1.02
1.10
0.15
0.95
0.27
0.23
3.10
5.05
3.10
0.032
0.002
0.030
0.007
0.005
0.114
0.187
0.114
0.043
0.006
0.037
0.011
0.009
0.122
0.199
0.122
A1
A2
0.86
0.20
0.034
0.008
b
C
0.15
0.006
*Notes:
Dimension “D” does not include mold
flash, Protrusions or gate burrs.
Mold flash, tie bar burrs and fate burrs
shall not exceed 0.12 MM (0.05 Inch)
per end dimension “E1” dose not
include interlead flash.
D
3.00
0.118
E
4.90
0.193
E1
3.00
0.118
e
0.50BASIC
0.55
0.020 BASIC
0.022
L
ꢀ
0.40
0*
0.70
6*
0.016
0*
0.028
6*
Interlead flash shall not exceed
0.25MM (0.010 Inch) per side.
3*
3*
JEDEC
SV7102
www.savitech-ic.com
Savitech
SV7102
Information furnished is believed to be accurate and reliable. However, SAVITECH assumes no responsibility for the consequences of use of
such information nor for any infringement of patents or other rights of third parties that may result from its use. No license is granted by implication
or otherwise under any patent or patent rights of SAVITECH. Specifications mentioned in this publication are subject to change without notice.
This publication supersedes and replaces all information previously supplied. SAVITECH products are not authorized for use as critical
components in life support devices or systems without express written approval of SAVITECH.
The SAVITECH logo is a registered trademark of Savitech Corporation.
All other names are the property of their respective owners
© 2011 Savitech Corporation - All Rights Reserved
SV7102
www.savitech-ic.com
相关型号:
SV73253C-16QP-TR2
8KV ESD Protected, Low-Voltage, High-Bandwidth, Dual 4:1 MUX/DEMUX Bus Switch
SAVITECH
©2020 ICPDF网 联系我们和版权申明