3-109-714 [SCHURTER]
IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole;型号: | 3-109-714 |
厂家: | SCHURTER INC. |
描述: | IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole |
文件: | 总8页 (文件大小:847K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole
Screw-on with IP67 and TA35 in white with black
printed symbols
Screw-on with IP67
Snap-in IP40 with TA35 red illuminated and em-
bossed symbols
C14
C18
See below:
Approvals and Compliances
70° C
70° C
Description
Characteristics
- Panel mount :
- Connector and circuit breaker are prewired
- Circuit Breaker non-illuminated or illuminated
- Suitable for use in equipment according to IEC/UL 62368-1
Screw-on version from front or rear side, snap-in version front side
- 2 Functions :
Appliance Inlet , protection class I or II , Circuit breaker type TA35
, 2-pole
- Pre-wired coupling
- V-Lock notch standard
- Quick connect terminal 6.3 x 0.8 mm
Other versions on request
- Version without pre-wiring from inlet to circuit breaker
- Protection class II, 70°C
- Variants in white
References
Substitute for type 6135
Component: circuit breakers TA35 Rocker 2Pole; TA36 Rocker
Alternative: version with line filter DG12
Unique Selling Proposition
- Variant tested for IP67 into the appliance
- Various mounting options
- Recessed rocker prevents accidental manipulation
- Compatible with V-Lock cord retention
Weblinks
pdf data sheet, html datasheet, General Product Information, Approvals,
Distributor-Stock-Check, Accessories, Detailed request for product
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
10A / 250VAC; 50Hz
15A / 250VAC; 60Hz
> 2.5kVAC between L-N
> 3kVAC between L/N-PE
(1min/50Hz)
Appliance inlet/-outlet
Circuit Breakers
C14 / C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I or II
Acc. IEC/EN 60934, UL 1077, CSA
22.2 no. 235
2-pole rocker switch, illuminated or non-
illuminated.
Conditional short circuit Inc:
2000 A
Allowable Operation Tempe-
rature
IP-Protection
Protection against electric
shock
-25°C to 60°C
front side IP40 / IP67 acc. to IEC 60529
Suitable for appliances with protection
class I or II acc. to IEC 61140
Terminal
Quick connect terminals 6.3 x 0.8 mm
Panel Thickness S
Screw: max 8mm
Recommended torque min 0.25Nm
Snap-in : S =1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Material: Housing
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national
and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF
16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-
ments by SCHURTER.
1
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: DG11
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40048151
UL Approvals
UL
UL File Number: E96454
CCC Approvals
CCC
CCC Certificate Number: 2019180204007932, 2019180204007907
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Designed according to
Designed according to
UL 60320-1
Standard for Attachment Plugs and Receptacles
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization
Design
Standard
Description
Designed for applications acc.
IEC/UL 62368-1
Audio/video, information and communication technology equipment - Part
1: Safety requirements
Compliances
The product complies with following Guide Lines
Identification
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
UKCA declaration of conformity
SCHURTER AG
The UKCA marking declares that the product complies with the applicable
requirements laid down in the British Amendment of Regulation (EC)
765/2008.
RoHS
SCHURTER AG
SCHURTER AG
SCHURTER AG
Directive RoHS 2011/65/EU, Amendment (EU) 2015/863
China RoHS
REACH
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
2
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Dimensions [mm]
Snap-in mounting for front mount IP40
(51.6)
48.3
5.65
35
0.10
30
5.35
+0.10
0
S
32.45
3.3
S = Panel thickness
Screw-on mounting version A for front mount IP40
5.65
(51.6)
48.3
5.35
0.10
3.3
30
ø 3.4/M3
1.2
35
32.45
Screw-on mounting Version A for rear mount IP40
(51.6)
50.1
5.65
ø 3.4
5.35
0.10
29.2
ø 3.4/M3
1.8
34.25
35
1.5
3
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Screw-on mounting Version B for front mount IP40
38 ±±.1±
(51.6)
48.3
5.65
48
3± ±±.1±
5.35
1.2
38
32.45
3.3
Screw-on mounting version B for rear mount IP40
0.10
5.65
38
(51.6)
50.1
48
0.10
5.35
29.2
1.8
34.25
38
1.5
Screw-on mounting for front mount IP67
(53.6)
50.3
5.65
51
0.10
5.35
34.3
0.10
32.45
3.3
42
42
4
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Diagrams
L' P1
L
1)
2)
PE
N
PE'
N' P2
1) Line
2) Load
Effect of ambient temperature
The units are calibrated for an ambient temperature of +23°C. To determine the rated cur-
rent for a lower or higher ambient temperature, use a correction factor (typical value) from
the table below:
Ambient Temperature [°C]
Correction factor
-30
-20
0
0.76
0.81
0.90
1.00
1.03
1.04
1.06
+23
+40
+50
+60
Example: Rated current = 5 A, Environmental temperature = 50 °C --> Correction factor =
1.04, Resulting current = 5.2 A --> Fount to next higher rated current: 6 A
Time-Current-Curves
Tripping Characteristics In < 3 A
Tripping Characteristics In ≥ 3 ... ≤ 15 A
[ min ] [ sec ]
10'000
[ min ] [ sec ]
10'000
Typ
p
TA35
Typ
TA35
>
Nennstrom
<3A (TC-1,TC-2)
Nennstrom
3–15A (TC-1, TC-2)
Umgebungstemp. +23 °C
Umgebungs-
temp.
60
60
+23 °C
2`000
30
2`000
30
20
20
1`000
1`000
10
10
500
500
5
5
200
200
100
100
1
1
50
50
20
20
10
5
10
5
2
2
1
1
0,5
0,5
0,3
0,2
0,3
0,2
0,1
0,1
1,05 1,35
2
3
4
5
8
10
1,05 1,35
2
3
4
5
8
10
Multiple of Rated Current In
Reference Temperature +23°
Multiple of Rated Current In
Reference Temperature +23°
5
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Configuration Code
Color
0
Typ
Configuration Code
(Example) TA35
Black
Panel Mounting
1)
Screw version A front mounting
Screw version B front mounting
Screw version A rear mounting
Screw version B rear mounting
Snap-in 1.0 mm
Snap-in 1.2 mm
Snap-in 1.5 mm
Snap-in 2.0 mm
Snap-in 2.5 mm
00
01
02
03
10
12
15
20
25
30
88
DG11
C B D W F 1 2 0 C 0 -000- C6135-XXX - XXX -00
see table 1
Snap-in 3.0 mm
Screw version front mounting
(sealed towards housing, IP67)
Terminal PE
0
1
Without (PCII)
QC 6.3x0.8 mm
Terminal N
1
3
QC 6.3x0.8 mm (unwired)
Connection to TA35 (wired)
Terminal L
1
3
QC 6.3x0.8 mm (unwired)
Connection to TA35 (wired)
1)
Screw version A
Screw version B
6
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
ORDER CODE
Table 1 Selection for type TA35
Order example
Number of switched poles
2-pole
Number of protected poles
1
2
LINE
LINE
LOAD
LOAD
TA35-
CBD
W
F
120
C0
Switch
Switch
without
illumination
CBT
CBD
No other
features
illuminated 240 V
120 V
C12
C14
C32
C34
Other versions on request
Colours
Switch front
Rocker
non-illuminated
illuminated
W
B
3
4
6
black
white
black
–
–
–
–
–
black
black
black
black
red transparent
green transparent
orange transparent
Other colours on request
Rocker legend
Surface
Illustration
Colour of print
F
embossed
printed
printed
printed
printed
H
K
L
white
black
white
black
M
Other legends on request
Position of the rocker
legend e.g. I / O
Rated current In (A)
In
Code
In
Code
080
1,0
2,0
4,0
5,0
6,0
J10
J20
040
050
060
8,0
10,0 100
12,0 120*
15,0 150*
*) UL / CSA only
Other rated currents on request
7
Connectors
Power entry modules without line filter
DG11
https://www.schurter.com /PG05
Variants
Circuit Breaker
Rocker colour
Connector
Rated Current [A]
Illumination
Protection Class
Color
Mounting
IP-Protection
Order Number
█
█
█
█
█
█
█
█
█
█
10
10
10
10
10
10
15
15
15
15
orange transparent
white
illuminated
I
I
I
I
I
I
I
I
I
I
black
black
black
black
black
black
black
black
black
black
Snap-in mounting
Screw-on version
Screw version B
Snap-in mounting
Screw version B
Screw version A
Snap-in mounting
Screw version B
Screw version A
Screw-on version
IP40
IP67
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP67
3-107-924
3-108-454
3-108-463
3-109-713
3-109-714
3-109-715
3-109-716
3-109-717
3-109-718
3-109-719
non-illuminated
non-illuminated
non-illuminated
non-illuminated
non-illuminated
non-illuminated
non-illuminated
non-illuminated
non-illuminated
black
white
white
white
white
white
white
white
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
More information in the HTML data sheet on the variant table
10 Pcs
Packaging unit
Accessories
Description
RC320
Rear Cover for Power Entry Module
Mating Outlets/Connectors shuttered
Category / Description
Connector Overview complete
4783 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13
4783
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
8
Connectors
相关型号:
©2020 ICPDF网 联系我们和版权申明