4304.6084 [SCHURTER]

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT;
4304.6084
型号: 4304.6084
厂家: SCHURTER INC.    SCHURTER INC.
描述:

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT

连接器 电源连接器
文件: 总6页 (文件大小:416K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
IEC Appliance Inlet C14 or C18 with Line Switch 2 pole and Fuseholder 1- or 2-pole  
C14  
C18  
Approvals and Compliances  
70° C  
70° C  
Description  
- Panel Mount :  
Characteristics  
- Line switch non-illuminated or illuminated  
Screw-on version from front or rear side , Appliance Inlet , protection  
class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch 2-pole  
- Meets the requirements of IEC 60335-1 for appliances in unattended  
use. This includes the enhanced requirements of glow wire tests acc.  
to IEC 60695-2-12 and -13.  
References  
Alternative: version with line filter FKID  
Weblinks  
pdf datasheet, html-datasheet, General Product Information, Distributor-  
Stock-Check, Accessories, Detailed request for product  
- Solder terminals or quick connect terminals  
Technical Data  
Ratings IEC  
Ratings UL/CSA  
Dielectric Strength  
10A / 250VAC; 50Hz  
10A / 250VAC; 60Hz  
> 1.5kVAC between L-N  
> 3kVAC between L/N-PE  
(1min/50Hz)  
appliance inlet/-outlet  
C14 / C18 acc. to IEC 60320-1  
UL 498, CSA C22.2 no. 42 (for cold  
conditions) pin-temperature 70 °C, 10A,  
Protection Class I or II  
1 or 2 pole, acc. to IEC 60127-6,  
for fuse-links 5 x 20mm  
Admissible power acceptance at higher  
ambient temperature see derating cur-  
ves  
Rocker switch 2-pole, non-illuminated  
or illuminated black, acc. to IEC  
61058-1  
Fuseholder  
Allowable Operation Tempe-  
rature  
IP-Protection  
-25°C to 70°C  
Power Acceptance @ Ta >  
23°C  
from front side IP 20 acc. to IEC 60529  
Suitable for appliances with protection  
class I or II acc. to IEC 61140  
Solder terminals or quick connect ter-  
minals  
Insulation cover  
Line Switch  
Terminal  
Technical Details  
Material: Housing  
PA6, black, UL 94V-0  
Approvals and Compliances  
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about  
Approvals  
Approvals  
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.  
Approval Reference Type: 6765  
Approval Logo  
Certificates  
Certification Body  
Description  
SEMKO Approvals  
SEMKO  
Certificate Number: SE/09137-1A  
UL Approvals  
CSA Approvals  
CSA Approvals  
UL  
UL File Number: E93617  
CSA  
CSA  
CSA Certification Record: 27324  
CCC File Number: 27324  
1
Connectors  
 
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
Product standards  
Product standards that are referenced  
Organization  
Design  
Standard  
Description  
Designed according to  
IEC 60320-1  
Appliance couplers for household and similar general purposes  
Miniature fuses. Part 6. Fuse-holders for miniature fuse-links  
Switches for appliances. Part 1. General requirements  
Designed according to  
Designed according to  
Designed according to  
Designed according to  
IEC 60127-6  
IEC 61058-1  
UL 498  
Standard for Attachment Plugs and Receptacles  
CSA C22.2 no. 42  
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices  
Application standards  
Application standards where the product can be used  
Organization  
Design  
Standard  
Description  
Designed for applications acc.  
IEC/UL 60950  
IEC 60950-1 includes the basic requirements for the safety of information  
technologyequipment.  
Designed for applications acc.  
IEC 60335-1  
Safety of electrical appliances for household and similar purposes. Meets  
the requirements for appliances in unattended use. This includes the en-  
hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13.  
Compliances  
The product complies with following Guide Lines  
Identification  
Details  
Initiator  
Description  
CE declaration of conformity  
SCHURTER AG  
The CE marking declares that the product complies with the applicable  
requirements laid down in the harmonisation of Community legislation on  
its affixing in accordance with EU Regulation 765/2008.  
RoHS  
SCHURTER AG  
SCHURTER AG  
SCHURTER AG  
EU Directive RoHS 2011/65/EU  
China RoHS  
REACH  
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March  
2007. It is similar to the EU directive RoHS.  
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,  
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as  
"REACH") entered into force.  
Dimensions [mm]  
+0.2  
- 0  
27.2  
50  
21.5  
27  
28  
40  
3
5
40  
Length of the terminal please find at the order code configuration table  
2
Connectors  
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
Derating Curves  
1-pole  
2-pole  
2.0  
1.6  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
1.5  
I = 1.0 In  
I = 1.0 In  
I = 0.7 In  
I = << In  
I = 0.7 In  
1.0  
I = << In  
0.5  
0.2  
0.0  
0.0  
0
20  
40  
60  
80  
100  
0
20  
40  
60  
80  
100  
Ambient air temperature Ta °C  
Ambient air temperature Ta °C  
Config. Code  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|  
The characters are placeholders for the correspondingly keys of selections from the key tables.  
Terminal Fuseholder  
Configuration  
key  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Type  
Type  
Configuration  
key  
solder terminal  
1
protection class II  
protection class I  
B
X
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Color  
Color  
Configuration  
key  
Black  
A
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
Terminal L  
Configuration  
key  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Style  
connection to fuse holder  
B
Style  
Configuration  
key  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
flange with countersunk holes  
1
Terminal N  
Configuration  
key  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Dimension S  
short solder terminal (L = 4.8 mm)  
long solder terminal (L = 8.5 mm)  
Blade terminal (4.8 x 0.8 mm)  
Blade terminal (6.3 x 0.8 mm)  
connection to fuse holder  
2
3
8
9
B
Dimension "S"  
Configuration  
key  
00  
The dimension "S" is displayed in (1/10 mm). This information is also valid for the  
order code  
Symbols similar as in table A  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Features  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminals  
Features  
Configuration  
Terminal Ground  
Configuration  
key  
key  
dead cover  
1
4
5
without terminal  
0
2
3
8
9
holder for 1 or 2 fuses (text legible, when inlet on top)  
holder for 1 or 2 fuses (text legible, when inlet on bottom)  
short solder terminal (L = 4.8 mm)  
long solder terminal (L = 8.5 mm)  
Blade terminal (4.8 x 0.8 mm)  
Blade terminal (6.3 x 0.8 mm)  
Symbols similar as in table A  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Switches  
6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P|= Terminal Fuseholder  
3
Connectors  
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
Switches  
Configuration  
key  
Switches  
Configuration  
key  
not used  
0
1
4
5
bipolar switch, 4,8mm blade terminal, rocker red illuminated  
bipolar switch, solder terminal, rocker red illuminated  
6
7
8
9
dead cover  
bipolar switch, 4,8mm blade terminal, black rocker  
bipolar switch, solder terminals, black rocker  
bipolar switch, 4,8mm blade terminals, rocker green illuminated  
bipolar switch, solder terminals, rocker green illuminated  
All Variants  
Type  
Terminal L  
Terminal N  
Terminal Ground  
Features  
Switches  
Config. Code  
V-Lock Order Number  
protection class I  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
not used  
6765-X-BB21-A-10040  
4304.6078  
protection class I  
protection class I  
protection class I  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
6765-X-BB21-A-10044  
6765-X-BB21-A-10045  
6765-X-BB21-A-10054  
4304.6079  
4304.6080  
4304.6081  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
fuses (text legible, terminals, black rocker  
when inlet on top)  
bipolar switch, solder  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on  
bottom)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
protection class I  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
bipolar switch, solder  
6765-X-BB21-A-10055  
4304.6082  
fuses (text legible, terminals, black rocker  
when inlet on  
bottom)  
protection class I  
protection class I  
protection class I  
protection class I  
protection class I  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
not used  
6765-X-BB81-A-10040  
6765-X-BB81-A-10044  
6765-X-BB81-A-10046  
6765-X-BB81-A-10048  
6765-X-BB81-A-10054  
4304.6085  
4304.6087  
4304.6088  
4304.6089  
4304.6090  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
bipolar switch, 4,8mm  
blade terminal, rocker  
red illuminated  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
bipolar switch, 4,8mm  
fuses (text legible, blade terminals, rocker  
when inlet on top)  
green illuminated  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on  
bottom)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
protection class I  
connection to fuse connection to fuse Blade terminal (4.8  
holder holder x 0.8 mm)  
holder for 1 or 2  
bipolar switch, 4,8mm  
6765-X-BB81-A-10058  
4304.6091  
fuses (text legible, blade terminals, rocker  
when inlet on  
bottom)  
green illuminated  
protection class I  
protection class I  
protection class I  
protection class I  
connection to fuse connection to fuse Blade terminal (6.3  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
6765-X-BB91-A-10044  
6765-X-BB91-A-10045  
6765-X-BB91-A-10046  
6765-X-BB91-A-10054  
4304.6092  
4304.6093  
4304.6094  
4304.6095  
connection to fuse connection to fuse Blade terminal (6.3  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible, terminals, black rocker  
when inlet on top)  
bipolar switch, solder  
connection to fuse connection to fuse Blade terminal (6.3  
holder holder x 0.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
bipolar switch, 4,8mm  
blade terminal, rocker  
red illuminated  
connection to fuse connection to fuse Blade terminal (6.3  
holder for 1 or 2  
fuses (text legible,  
when inlet on  
bottom)  
bipolar switch, 4,8mm  
blade terminal, black  
rocker  
holder  
holder  
x 0.8 mm)  
protection class I  
protection class I  
protection class I  
connection to fuse connection to fuse  
holder holder  
without terminal  
holder for 1 or 2  
fuses (text legible,  
when inlet on top)  
not used  
6765-X-BB01-A-10040  
6765-X-BB91-A-10048  
6765-X-BB21-A-10050  
4304.6122  
4304.6153  
4304.6203  
connection to fuse connection to fuse Blade terminal (6.3  
holder holder x 0.8 mm)  
holder for 1 or 2  
bipolar switch, 4,8mm  
fuses (text legible, blade terminals, rocker  
when inlet on top)  
green illuminated  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
fuses (text legible,  
when inlet on  
bottom)  
not used  
protection class I  
connection to fuse connection to fuse short solder termi-  
holder holder nal (L = 4.8 mm)  
holder for 1 or 2  
bipolar switch, 4,8mm  
6765-X-BB21-A-10048  
4304.6215  
fuses (text legible, blade terminals, rocker  
when inlet on top)  
green illuminated  
The listet variants should be available from stock Other versions on request www.schurter.com/contact  
Most Popular.  
4
Connectors  
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
Type  
Terminal L  
Terminal N  
Terminal Ground  
Features  
Switches  
Config. Code  
V-Lock Order Number  
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER  
50 Pcs  
Packaging unit  
Accessories  
Description  
Wire Harness  
Wire harness for SCHURTER products  
Assorted Covers  
Rear Cover  
Mating Outlets/Connectors  
Category / Description  
Connector Overview complete  
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13  
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13  
4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13  
Connector further types to 6765  
4782  
4022  
4785  
4300-06  
4012  
...  
Interconnection Cord Overview complete  
Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black  
Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Interconnection Cord further types to 6765  
6007.0204  
6007.0212  
6007.0214  
5
Connectors  
Power entry modules without line filter  
6765  
https://www.schurter.com /PG05  
Category / Description  
Power Supply Cord Overview complete  
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black  
Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black  
Power Supply Cord further types to 6765  
6004.0215  
6003.0215  
6000.0224  
6000.0214  
6044.0215  
...  
Power Supply or Interconnection Cord Overview complete  
Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black  
Power Supply or Interconnection Cord further types to 6765  
6044.0204  
Mating Outlets/Connectors shuttered  
Power Cord Overview complete  
Power cord with IEC connector C17, V-Lock, straight  
Power Cord further types to 6765  
VAC17KS  
The specifications, descriptions and illustrations indicated in this document are based on current  
information. All content is subject to modifications and amendments. Information furnished is believed  
to be accurate and reliable. However, users should independently evaluate the suitability and test each  
product selected for their own applications.  
6
Connectors  

相关型号:

4304.6085

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6087

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6088

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6090

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6093

Mains Power Connector, 10A, 250VAC, Male, Solder Terminal, ROHS COMPLIANT
SCHURTER

4304.6129

IEC Appliance Inlet C14 or C18 with Fuseholder 1- or 2-pole
SCHURTER

43040

Power Dividers
ANAREN

430400-01-0

CONN BARRIER STRIP 1CIRCUIT
ETC

430400-02-0

CONN BARRIER STRIP 2CIRC 0.438"
ETC

430400-03-0

CONN BARRIER STRIP 3CIRC 0.438"
ETC

430400-04-0

CONN BARRIER STRIP 4CIRC 0.438"
ETC

430400-05-0

CONN BARRIER STRIP 5CIRC 0.438"
ETC