5120.0216.0_技术文档

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

IEC Appliance Inlet C14 or C18 with Filter, ECO design, Front- or Rear Side Mounting

Front side mounting with plastic flange

Snap-in mounting

Quick connect terminals 6.3 x 0.8 mm

Protection class II

Screw-on mounting

with wires (stranded)

C14

C18

Approvals and Compliances

70° C

Description

- Panel Mount :

Characteristics

- Compact high performance filter

Optimal shielding due to completely closed filter case, unpotted

- Suitable for assembly in metal plated plastic housings

- Suitable for use in equipment according to IEC/UL 60950

Suitable for use in medical equipment according to IEC/UL 60601-1

Screw-on version from front or rear side, snap-in version from front

side, PCB Version from rear side

- 2 Functions :

Appliance Inlet protection class I or II , Line filter in standard and medi-

cal version

- Solder, quick connect or wire (stranded)

- PCB Mounting

Other versions on request

- Snap-in for panel thickness >2mm to 3mm

- flexible wire with various lenghts

- Earth Terminal

- Class X1- and Y1-capacitors for enhanced withstand voltage

- Medical version M80

- Variant with notch for V-Lock mating Cordsets

Unique Selling Proposition

- Various variants

- Metal flange for optimal shielding

- Compact design

References

Alternative: version without line filter 6100-3; 6100-4; 6102-3; 6102-5

- Variants for protection class I and II

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC

Ratings UL/CSA

Leakage Current

1 - 10A @ Ta 40 °C / 250VAC; 50Hz

1 - 15A @ Ta 40 °C / 250VAC; 60Hz

standard < 0.5mA (250V / 60Hz)

medical < 5 µA (250 V / 60 Hz)

> 1.7kVDC between L-N

> 2.7kVDC between L/N-PE

Test voltage (2sec)

-25°C to 85°C

appliance inlet/-outlet

C14 / C18 acc. to IEC 60320-1,

UL 498, CSA C22.2 no. 42 (for cold

conditions) pin-temperature 70 °C, 10A,

Protection Class I or II

Standard and Medical Version, IEC

60939, UL 1283, CSA C22.2 no. 8

Technical Details

Line Filter

MTBF

Dielectric Strength

> 3'000'000h acc. to MIL-HB-217 F

Allowable Operation Tempe-

rature

Climatic Category

IP-Protection

Protection Class

25/085/21 acc. to IEC 60068-1

from front side IP 40 acc. to IEC 60529

Suitable for appliances with protection

class I or II acc. to IEC 61140

Quick connect terminals 6.3 x 0.8 mm

Solder terminals

Terminal

Flexible wire AWG18 (15A AWG16),

150 mm

Panel Thickness S

Screw with plastic flange: max 8mm

Mounting screw torque max 0.5Nm

Snap-in: 0.8mm to 2mm

(all steps with one variant)

Material: Housing

Themoplast / steel tin-plated, black /

metallic, UL 94V-0

Approvals and Compliances

1

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: 5120

Approval Logo

Certificates

Certification Body

Description

VDE Approvals

VDE

Certificate Number: 40016382

UL Approvals

UL

UL File Number: E72928

CQC Approvals

CQC

CCC File Number: CQC17001171087

Product standards

Product standards that are referenced

Organization

Design

Standard

Description

Designed according to

IEC 60320-1

Appliance couplers for household and similar general purposes

Designed according to

IEC 60939

Passive filters for suppressing electromagnetic interference

Standard for Attachment Plugs and Receptacles

Electromagnetic interference filters

UL 498

UL 1283

CSA C22.2 no. 42

CSA C22.2 no. 8

General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Electromagnetic interference (EMI) filters

Application standards

Application standards where the product can be used

Organization

Design

Standard

Description

Designed for applications acc.

IEC/UL 60950

IEC 60950-1 includes the basic requirements for the safety of information

technologyequipment.

Designed for applications acc.

IEC 60601-1

Medical electrical equipment - Part 1: General requirements for basic

safety and essential performance

Compliances

The product complies with following Guide Lines

Identification

Details

Initiator

Description

CE declaration of conformity

SCHURTER AG

The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS

SCHURTER AG

EU Directive RoHS 2011/65/EU

China RoHS

REACH

The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

MicrositeV-Lock

SCHURTER AG

V-Lock system are based on a matching plug-dose combination. The

connector is equipped with a notch intended for use with the latching

cordset. The cord latching system prevents against accidental removal of

the cordset.

Medical Equipment

Suitable for use in medical equipment according to IEC/UL 60601-1

2

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Dimensions [mm]

Front or rear side mounting for screws with nuts or blind rivets (panel cutout for frontside mounting)

48.6

0.1

40

2.9

12

39.5

12

29

max.R3

0.10

54.9

40

3.6

M3

Front side mounting with plastic flange

48.6

40

0.1

12

39.5

2.9

12

29

max.R3

0.10

54.9

40

3.5

M3

Rear side mounting with pre-formed, threaded holes for M3 screws (panel cutout for rear side mounting)

48.6

0.1

30.5

40

12

39.5

12

2.9

max.R3

0.10

40

M3

3.6

Dimensions for class II version also apply to class I

3

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Snap-in mounting from front side

29.4^±±.1±

32.6

2.9

12

39.5

12

max.R1.5

54.9

Dimensions for class I version also apply class II

PCB snap-in rear side mounting, protection class II

48.6

40

49.2

39.5

2.9

12

M3

4.6

26.2

15.5

27

0.10

30.5

27

0.05

ø6

max.R3

0.10

12

0.10

40

ø3.6

4

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

PCB rear side mounting, protection class II

48.6

40

39.5

2.9

12

M3

30.8

15.5

27

0.10

30.5

max.R3

0.10

12

0.10

40

ø3.6

Screw and snap-in mounting with flexible wire

54.9

39.5

48.6

40

2.9

13

150

1)

46.1

M3

2)

0.10

30.5

29

max.R3

max.R1.5

0.10

40

29.4

ø3.6

3)

M3

4)

5)

1) Flexible wire, standard length 150 mm or special length on request

2) Nonexistent for protection class II

3) Panel cut-out screw-on version, back-side mounting

4) Panel cut-out screw-on version, front- or back-side mounting

5) Panel cut-out snap-in version, front-side mounting

5

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Technical Data of Filter-Components

Rated Current

[A]

Filter-Type

Inductances Capacitance Capacitance

R [MΩ]

L [mH]

CX [nF]

CY [nF]

1

2

Standard Version

2 x 12

2 x 5.2

2 x 2

100

2.2

-

Standard Version

4

Standard Version

-

6

Standard Version

2 x 0.8

2 x 0.4

2 x 0.1

2 x 12

2 x 5.2

2 x 2

-

10

15

1

Standard Version

-

Standard Version

-

Medical Version (M5)

Bleed Resistor Version

1

2

-

4

-

6

2 x 0.8

2 x 0.4

2 x 0.1

2 x 12

2 x 5.2

2 x 2

-

10

15

1

-

2.2

2

4

6

2 x 0.8

2 x 0.4

2 x 0.1

10

15

Diagrams

Standard version

Bleed resistor version / medical version M80

L

L’

L

L’

L1

Cy

1)

R

2) 1)

R

2)

PE

N

PE’

N’

PE

N

PE’

N’

Cx

L 2

1) Line

2) Load

1) Line

2) Load

Medical version M5

Medical version M5, prot. class II

L

L’

L

L’

L1

1)

R

2) 1)

R

2)

PE

N

PE’

N’

Cx

L 2

N

N’

1) Line

2) Load

1) Line

2) Load

6

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

- - - - 50Ω differential mode _____ 50Ω common mode

Attenuation Loss

Standard version

1 A

2 A

4 A

6 A

10 A

15 A

Medical version (M5)

1 A

2 A

4 A

6 A

10 A

15 A

All Variants

Rated Cur-

rent [A]

Filter-Type

Mounting

Mounting side

Terminal

Protection Class

V-Lock Order Number

6

1

Standard Version

Snap-in 2 - 3 mm

Snap-in

Front Side

Rear Side

Flexible wire

Quick connect

I

5120.3034.0

5120.2000.0

5120.2001.0

5120.2003.0

5120.2004.0

5120.2006.0

5120.2046.0

5120.2007.0

█

2

Snap-in

Quick connect

4

Snap-in

Quick connect

6

Snap-in

Quick connect

10

15

1

Snap-in

Quick connect

Snap-in

Flexible wire and

Quick connect

█

Snap-in

Screw/PCB snap-in

PCB pin and earth

l

5120.5070.0

5120.5071.0

5120.5073.0

5120.5074.0

5120.5076.0

5120.5077.0

2

4

6

10

15

7

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Rated Cur-

rent [A]

Filter-Type

Mounting

Mounting side

Terminal

Protection Class

V-Lock Order Number

1

2

Standard Version

Screw/PCB

Rear Side

PCB pin and earth

Quick connect

Solder terminals

Quick connect

Flexible wire

I

5120.4070.0

5120.4071.0

5120.4073.0

5120.4074.0

5120.4076.0

5120.4077.0

5120.0000.0

5120.0010.0

5120.0001.0

5120.0003.0

5120.0004.0

5120.0006.0

5120.0007.0

5120.0057.0

Standard Version

4

Standard Version

Screw/PCB

Rear Side

6

Standard Version

Screw/PCB

Rear Side

10

15

1

Standard Version

Screw/PCB

Rear Side

Standard Version

Screw/PCB

Rear Side

Standard Version

Screw-on/Rivet

Screw with plastic flange

Screw

Front-/Rear-Side

Front Side

1

Standard Version

█

2

Standard Version

4

Standard Version

6

Standard Version

10

15

1

Standard Version

Quick connect

Flexible wire and

Quick connect

PCB pin and earth

Quick connect

Flexible wire and

Quick connect

l

3-101-140

█

2

Standard Version

Front Side

3-101-141

4

Standard Version

Front Side

3-101-142

6

Standard Version

Front Side

3-101-143

10

15

1

Standard Version

Front Side

3-100-776

Standard Version

Front Side

3-101-144

Standard Version

Rear Side

5120.1000.0

5120.1001.0

5120.1003.0

5120.1004.0

5120.1006.0

5120.1006.0.21

5120.1046.0

5120.1007.0

5120.1007.0.21

5120.2300.0

5120.2301.0

5120.2303.0

5120.2304.0

5120.2306.0

5120.2307.0

5120.5373.0

5120.5374.0

5120.4373.0

5120.4374.0

5120.0300.0

5120.0301.0

5120.0303.0

5120.0343.0

5120.0304.0

5120.0306.0

5120.0307.0

3-101-145

2

Standard Version

Screw

Rear Side

█

4

Standard Version

Screw

Rear Side

6

Standard Version

Screw

Rear Side

10

15

1

Standard Version

Screw

Rear Side

Standard Version

Screw

Rear Side

l

Standard Version

Screw

Rear Side

Standard Version

Screw

Rear Side

Standard Version

Screw

Rear Side

Medical Version (M5)

Snap-in

Front Side

2

Snap-in

Front Side

4

Snap-in

Front Side

6

Snap-in

Front Side

█

10

15

4

Snap-in

Front Side

Snap-in

Front Side

Screw/PCB snap-in

Screw/PCB

Rear Side

6

Rear Side

4

Rear Side

6

Screw/PCB

Rear Side

1

Screw-on/Rivet

Screw with plastic flange

Screw

Front-/Rear-Side

Front Side

2

█

4

6

10

15

1

l

2

Front Side

3-101-146

█

4

Front Side

3-100-794

6

Front Side

3-101-147

10

15

1

Front Side

3-101-148

Front Side

3-101-149

Rear Side

5120.1300.0

5120.1301.0

2

Screw

Rear Side

8

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Rated Cur-

rent [A]

Filter-Type

Mounting

Mounting side

Terminal

Protection Class

V-Lock Order Number

4

6

Medical Version (M5)

Bleed Resistor Version

Screw

Rear Side

Quick connect

Flexible wire and

Quick connect

PCB pin and earth

Quick connect

Solder terminals

Quick connect

Solder terminals

Quick connect

Solder terminals

I

5120.1303.0

5120.1304.0

5120.1306.0

5120.1306.0.21

5120.1346.0

5120.1307.0

5120.2300.1

5120.2301.1

5120.2303.1

5120.2304.1

5120.2306.1

5120.2307.1

5120.5373.1

5120.5374.1

5120.5376.1

5120.4373.1

5120.4374.1

5120.0301.1

5120.0303.1

5120.0304.1

5120.0316.1

5120.1300.1

5120.1301.1

5120.1311.1

5120.1303.1

5120.1304.1

5120.1306.1

5120.2201.0

5120.2203.0

5120.2204.0

5120.2206.0

5120.2207.0

5120.2207.0.21

5120.0216.0

10

15

1

Screw

Rear Side

I

Screw

Rear Side

I

l

Screw

Rear Side

I

Screw

Rear Side

I

Snap-in

Front Side

Rear Side

II

I

2

Snap-in

4

Snap-in

6

Snap-in

10

15

4

Snap-in

Screw/PCB snap-in

Screw/PCB

Screw-on/Rivet

Screw

6

Rear Side

10

4

Rear Side

6

Rear Side

2

Front-/Rear-Side

Rear Side

4

6

10

1

2

Screw

Rear Side

2

Screw

Rear Side

4

Screw

Rear Side

6

Screw

Rear Side

10

2

Screw

Rear Side

Snap-in

Front Side

Front-/Rear-Side

4

Snap-in

I

6

Snap-in

I

10

15

10

Snap-in

I

Snap-in

I

Snap-in

I

l

Screw-on/Rivet

I

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

- 15 A version only according UL/CSA

- Type for screw-on mounting from rear side has pre-threaded holes for M3 screws

Variants with plastic flange are all V-Lock versions.

10 Pcs

Packaging unit

9

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

Accessories

Description

Wire Harness

Wire harness for SCHURTER products

Assorted Covers

Rear Cover

0859.0048

Cord retaining kits

Cord retaining strain relief

Flat head, E

Flat head, G

4700.0005

4700.0007

Mating Outlets/Connectors

Category / Description

Appliance Outlet Overview complete

IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal

4787

4788

IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal

IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal

Appliance Outlet further types to 5120

5091

Connector Overview complete

4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13

4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13

4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13

Connector further types to 5120

4782

4022

4785

4300-06

4012

...

Mating Outlets/Connectors shuttered

Power Cord Overview complete

VAC13KS, Overview, diverse Connector IEC C13, cord end:

Power cord with IEC connector C17, V-Lock, straight

Power Cord further types to 5120

VAC13KS

VAC17KS

10

EMC Products

Power Entry Modules with Line Filter

5120

https://www.schurter.com /PG06

The specifications, descriptions and illustrations indicated in this document are based on current

information. All content is subject to modifications and amendments. Information furnished is believed

to be accurate and reliable. However, users should independently evaluate the suitability and test each

product selected for their own applications.

11

EMC Products


型号：	5120.0216.0
厂家：	SCHURTER INC.
描述：	Mains Power Connector, 10A, 250VAC, Male, Screw Terminal, ROHS COMPLIANT 连接器电源连接器
文件：	总11页 (文件大小：1015K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

5120.0216.0 [SCHURTER]

相关型号：

5120.0300.0

5120.0304.0

5120.1000.0

5120.1006.0

5120.1006.0.21

5120.1046.0

5120.1200.0

5120.1201.0

5120.1203.0

5120.1207.0

5120.1300.0

5120.1300.1