6610.4014 [SCHURTER]
Mains Power Connector, 10/15A, 250VAC, Female, IDC Terminal, ROHS COMPLIANT;
| 型号： | 6610.4014 |
| 厂家： | 
SCHURTER INC. |
| 描述： | Mains Power Connector, 10/15A, 250VAC, Female, IDC Terminal, ROHS COMPLIANT 连接器 电源连接器 |
| 文件： | 总6页 (文件大小：457K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
IEC Appliance Outlet F, Snap-in Mounting, Front Side, IDC Terminal
Arrangement "cross"
(wires cross to pin axis)
Arrangement "along", view from rear side
(wires along to pin axis)
Type 6610-5 with integrated Light Pipe
F
See below:
Approvals and Compliances
70° C
Description
- Panel Mount :
Characteristics
- Protection cover can be used as "wire press"
- Live contact available as IDC, solder or quick connect terminal
- Suitable for use in equipment according to IEC/UL 60950
Snap-in version , from front side
- Connector , Pin temperature 70 °C , Protection class I
- Wire gauge 1-1.5mm²/1.5mm²/2.5mm²/14AWG/12AWG
- IDC terminals acc. to IEC 60998-2-3 for solid wires
Other versions on request
- UL approval for AWG 16; Versions for other wire gauges
Unique Selling Proposition
- IDC terminals for efficient wiring
- Significant reduces labor costs
- Cross and along orientation
- Ideal for PDU applications
References
Alternative: version for 16 A (20 A)
Alternative: version with integrated light pipes 6610-5
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Mounting instruction, Detailed request for
product, Microsite, Landing Page
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC
10A / 250VAC; 50Hz
15A / 250VAC; 60Hz
-25°C to 70°C
appliance inlet/-outlet
F acc. to IEC 60320-3
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10A, Protection Class I
Ratings UL/CSA
Allowable Operation Tempe-
rature
IP-Protection
Insulation cover
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Terminal
IDC terminals
Panel Thickness S
Snap-in,0.8/1/1.2/1.5/2/2.5/3.0 mm
(other on request)
Material: Housing
Thermoplastic, black, UL 94V-0
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6610
Approval Logo
Certificates
Certification Body
Description
VDE Approvals
VDE
Certificate Number: 40035679
UL Approvals
UL
UL File Number: E103791
CQC Approvals
CQC
CCC Certificate Number: 2010010204418560
1
Connectors
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
Product standards
Product standards that are referenced
Organization
Design
Standard
Description
Designed according to
IEC 60320-1
Appliance couplers for household and similar general purposes
Appliance couplers for household and similar general purposes
Standard for Attachment Plugs and Receptacles
Designed according to
Designed according to
Designed according to
IEC 60320-3
UL 60320-1
CSA C22.2 no. 60320-1
General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization
Design
Standard
Description
Designed for applications acc.
IEC/UL 60950
IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification
Details
Initiator
Description
CE declaration of conformity
SCHURTER AG
The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS
SCHURTER AG
SCHURTER AG
SCHURTER AG
EU Directive RoHS 2011/65/EU
China RoHS
REACH
The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
MicrositeV-Lock
SCHURTER AG
V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Dimensions [mm]
Version "cross" (wires cross to pin axis)
L/N/PE: IDC terminals
32.3±±.ꢀ±
35.8
s
2
Connectors
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
Version "along" (wires along to pin axis)
L/N/PE: IDC terminals
32.8+±.2±
±
35.8
3±
3
s
Version "cross" (wires cross to pin axis)
N/PE: IDC terminals, L: quick connect or solder terminal
41.91)
3±
32 ±±.1±
35.8
3
9.5
R5
s
32.3±±.1±
1) Other options:
Quick connect terminal 4.8x0.8:
Solder terminal:
40.3 mm
40.9 mm
3
Connectors
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
Version "along" (wires along to pin axis)
N/PE: IDC terminals, L: quick connect or solder terminal
32 ±±.ꢀ±
7
35.8
N
L
R5
6.3±±.ꢀ±
32.8+±.2±
±
s
Light Pipe integration
35.8
13.5
13.5
A
B
ø 2.8
The integration of light pipes in the appliance outlet provides status indication in smart PDUs. See Light Pipe Microsite for more information. http://lightpipe.schurter.com/
Assembly Instructions
Wire press version "cross"
Wire press version "along"
min. 8
min. 8
0.05
6.65
0.10
30
+ 0.10
0
3.5
0.10
0.10
13.1
22.5
3.5+ 0.10
0
0.10
14
4
Connectors
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
- The above mentioned dimensions are recommended when using an assembly tool.
- When using an assembly tool we recommend the above-mentioned dimensions.
- Use the cover or an assembly tool, to push the wires into the IDC terminals.
- The assembly force depends on the wire used and may require as much as 900 N.
- Press the wires into the IDC terminals until the wires touch with the plastic socket of the 6610 when using a tool.
- When using the cover be sure that it is properly mounted.
- The maximum diameter of the wire (including insulation) is 3.6 mm for along, 3.5 mm for cross version.
- The correct installation of the wires is essential for proper function of the 6610 in the end equipment.
All Variants
Alignment 1)
Conductor cross section
Panel Thickness
s [mm]
Terminal type live contact
Order Number
along
along
along
along
along
along
along
along
along
along
along
along
along
along
along
along
along
cross
cross
cross
cross
cross
cross
cross
cross
cross
cross
cross
cross
1.0 mm²
2.5
1.5
1.5
2
IDC terminals
6610.3016.03
6610.5014
6610.5014.03
6610.5015
6610.1011
6610.1012
6610.1013
6610.1014
6610.1015
6610.1015.03
6610.1016
6610.1017
6610.1354
6610.1354.03
6610.1254
6610.1254.03
6610.1154
6610.6012
6610.6014
6610.6254
6610.2012
6610.2013
6610.2014
6610.2014.03
6610.2015
6610.2016
6610.2017
6610.2254
6610.2154
1.5 mm² / 14 AWG
1.5 mm² / 14 AWG
1.5 mm² / 14 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
1.5 mm² / 14 AWG
1.5 mm² / 14 AWG
1.5 mm² / 14 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
2.5 mm² / 12 AWG
IDC terminals
IDC terminals
IDC terminals
0.8
1
IDC terminals
IDC terminals
1.2
1.5
2
IDC terminals
█
IDC terminals
IDC terminals
2
IDC terminals
2.5
3
IDC terminals
IDC terminals
1.5
1.5
1.5
1.5
1.5
1
Quick connect terminal 4.8 x 0.8
Quick connect terminal 4.8 x 0.8
Quick connect terminal 6.3 x 0.8
Quick connect terminal 6.3 x 0.8
Solder
IDC terminals
1.5
1.5
1
IDC terminals
Quick connect terminal 6.3 x 0.8
IDC terminals
1.2
1.5
1.5
2
IDC terminals
IDC terminals
█
IDC terminals
IDC terminals
2.5
3
IDC terminals
IDC terminals
1.5
1.5
Quick connect terminal 6.3 x 0.8
Solder
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-
SCHURTER
Articles with 1 mm² only with ENEC approval. Outer diameter of wire (including insulation) max. 3.5 / 3.6 mm.
1) The alignment describes whether the wires are along or across to the connector pin axis.
Suffix ".03" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for
use with the latching cordset. The cord latching system prevents against accidental removal of the cordset.
50 Pcs
Packaging unit
5
Connectors
Connectors (Inlets/Outlets)
6610
https://www.schurter.com /PG07
Accessories
Description
Cord retaining kits
Cord retaining strain relief
Flat head, E
Flat head, G
4700.0005
4700.0007
Mating Inlets/Plugs
Category / Description
Plug Overview complete
IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm
IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm
IEC Plug E, Cord Connector (Rewireable), Straight
4732
4735
9009
4733
4736
...
IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 8.5 mm
IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm
Plug further types to 6610
Mating Inlets/Plugs shuttered
Interconnection Cord Overview complete
VAC13KS, Interconnection, V-Lock cord retaining, 0.6 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
VAC13KS, Interconnection, V-Lock cord retaining, 1.2 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
VAC13KS, Interconnection, V-Lock cord retaining, 1.5 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
VAC13KS, Interconnection, V-Lock cord retaining, 3.0 m, Connector IEC C13, SVT 3x18 AWG, black
VAC13KS, Interconnection, V-Lock cord retaining, 1.8 m, Connector IEC C13, H05VV-F3G0.75 / SVT 3x18 AWG, black
Interconnection Cord further types to 6610
3-100-354
3-100-355
3-100-356
3-100-361
3-100-734
...
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
6
Connectors
相关型号：
6610.5014
IEC Appliance Outlet F, Snap-in Mounting, Front Side, IDC Terminal, integrated Light Pipe, Color Coding
SCHURTER
6610005-4
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal, Jack
BEL
6610005-6
Telecom and Datacom Connector, 16 Contact(s), Female, Right Angle, Solder Terminal, Jack
BEL
©2020 ICPDF网 联系我们和版权申明