KP01.1111.36 [SCHURTER]
Mains Power Connector, Male, Solder Terminal;
| 型号： | KP01.1111.36 |
| 厂家： | 
SCHURTER INC. |
| 描述： | Mains Power Connector, Male, Solder Terminal |
| 文件： | 总2页 (文件大小：141K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Pcb Mount, Snap-in or Screw-on • AC Inlet • AC Outlet
On / off Line Switch • Fuseholder for 5 x 20mm Fuses
COMBIFIT
Complete MULTIFIT family on page 10
NEW
• Power entry module with line switch, fuseholder or inlet/outlet
• For “cold” connections 65° C, Protection Class I.
• Pcb mount with snap-in or screw-on feet (self-tapping M3 screws
provided, ø 3 x 8mm)
• Panel mount from rear or "sandwich" between top and bottom / side to
side panels
AC inlet / switch
• Single or double pole shocksafe fuseholder according to IEC 65/VDE
0860 for 5 x 20mm fuses
• Integral 1-pole SPST on/off line switch or 2-pole DPST switch (70A/3-
4ms in-rush max.; 10,000 cycles lifetime)
• Insulation cover in back protects against inadvertant electric contact
• Ground terminal solder/quick-connect .187 x .032" (4.8 x 0.8mm) or
.250 x .032" (6.3 x 0.8mm)
• 0.5 Nm screw torque required for screw-on type
• Max. power dissipation 3.2 watts (1-pole fusing) or 5 watts (2-pole fusing)
according to IEC 127-6. For additional values Pv in function of Tamb , see
page 6.
• For materials, options and accessories please see page 23
• For inlets with piggy-back fuse clips see GSF, page 13
Medical
Fusedrawer
AC inlet / fuseholder
Inlet / switch
Inlet / outlet
UL
CSA
VDE
recognition
certification
approval
10A/250V1) File #E96454
10A/250V1) File #LR38456
10A/250V2) File #83482
10A/250V2)
10A/250V File #E103791
10A/250V File #LR38456
10A/250V File #83482
10A/250V
10A/250V
File
numbers
on request
SEMKO approval
SEV
approval
10A/250V2)
1) 10A/250V approval with 1/2 HP; 10A/125V approval with 1/3 HP
2) 4A inductive load
Inlet / fuseholder
UL
recognitation 10A/250V File #E93617
CSA
VDE
certification
approval
10A/250V File #LR38456
10A/250V File #83482
SEMKO approval
SEV approval
10A/250V
10A/250V
File numbers
on request
AC inlet / outlet
Optional “back-pack”
FILTERFIT (see pg. 45)
Optional “back-pack”
SURGEFIT (see pg. 45)
Standards: IEC 320/C14/F; IEC 127-6; EN 60320; EN 60127-6. Fusedrawer meets tool-
only accessibility requirements of medical standards IEC 601-1, BS5724 part 1, DIN/VDE
0750 part 1.
Cascading multi-function design
streamlines packaging
Snap-in pcb mounting
Screw-on pcb mounting
see next page for drilling diagram and panel cut-out
see next page for drilling diagram and panel cut-out
Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com
Continued ➠
COMBIFIT continued
Printed circuit board mounting
Order Numbers
KP01. 1 X X X . X X
Ground Terminal
0
= protection class II, without ground
1* = protection class I, solder/quick-connect
4.8 x 0.8mm, in connector axis
2
6
7
= protection class I, solder/quick-connect
6.3 x 0.8mm, in connector axis
= protection class I, solder/quick-connect
4.8 x 0.8mm, 90˚ to connector axis
= protection class I, solder/quick-connect
6.3 x 0.8mm, 90˚ to connector axis
Stable snap feet requires
minimal insertion force
Module must lay flat on the
pcb when soldering (see
diagram below)
Line switch
0 = without switch
non-illuminated illuminated 100- 250V~
1* = black
7* = red
2
3
4
5
= white
= red
= green
= orange
8* = green
9 = orange
Screw-on mount uses self-
tapping screws
0.5 Nm torque required for
screws
Mounting
For snap-in Pcb mount (thickness 1.6 mm):
11 = slot for panel, thickness S = 1.0mm
12* = slot for panel, thickness S = 1.5 – 2.0mm
13* = slot for panel, thickness S = 2.5 – 3.0mm
14 = slot for panel, thickness S = 3.5 – 4.0mm
15 = without slot for panel fixation
For 2-pole inlet/switch,2-pole
inlet/fuseholder and inlet/outlet
For 1-pole inlet/switch and
1-pole inlet/fuseholder
Other dimensions for
2-pole modules:
d1 = 6 ± 0.05 (snap-in)
d1 = 3.6 (screw-on)
d2 = 2 ± 0.1 (screw-on)
For screw-on Pcb mount (thickness 1.2-2.5mm):
With or without self-tapping screws, ø3 x 8mm
Tolerances not marked:
≤ 15 = ± 0.05
With
51
52*
53*
54
Without
61
62
63
64
panel thickness S = 1.0mm
panel thickness S = 1.5 – 2.0mm
panel thickness S = 2.5 – 3.0mm
panel thickness S = 3.5 – 4.0mm
panel thickness S = 0
≥ 15 = ± 0.1
Panel mounting
55
65
Standard combinations
0
1
2
3
4
= AC inlet with ac outlet
Insertion
from behind
= AC inlet with on/off line switch, 2-pole
= AC inlet with on/off line switch, 1-pole
= AC inlet with fuseholder, 2-pole
= AC inlet with fuseholder, 1-pole
Color of Housing
1* = black
Basic Specification
KP01 = Power entry module for Pcb mounting,
SNAPFIT or SCREWFIT
* standard configuration. Contact Schurter for non-standard order minimums.
Ordering example:
KP01.1112.11
“Sandwich”
mounting with
split enclosure panels
Prtotection class I, solder/quick-connect ground
terminal 4.8 x 0.8mm in connector axis
Black unlighted rocker switch
Snap-in pcb mounting (1.6mm pcb), with bezel for
1.5-2.0mm panel
Combination ac inlet with on/off line switch (2-pole)
Black housing
Power entry module for pcb mounting
Phone 707-778-6311 • Fax 707-778-6401 • E-mail 73024.2314@compuserve.com • Website http://www.schurterinc.com
相关型号：
©2020 ICPDF网 联系我们和版权申明