SE5167EHG-LF [SEAWARD]
300mA CMOS LDO Voltage Regulator;型号: | SE5167EHG-LF |
厂家: | Seaward Electronics Inc. |
描述: | 300mA CMOS LDO Voltage Regulator |
文件: | 总8页 (文件大小:434K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Description
Features
The SE5167 is an efficient linear voltage
¾
¾
¾
Typical 175mV dropout voltage at 150mA.
regulator. It has extra low dropout voltage. At light
loads the typical dropout voltage is 15mV, at full
load the typical dropout voltage is 380mV. The
output voltage accuracy is better than 2%.
Low Ground current at 65uA. (Typ.)
Guaranteed 300mA output over the full
operating temperature range.
¾
¾
¾
¾
¾
Extremely tight load and line regulation.
Low temperature coefficient.
The SE5167 has low ground current at 65uA,
so it can help prolong battery life. The SE5167 is
specially designed for hand-held, battery-powered
devices.
Current and thermal limiting.
No-load stability.
Available in SOT-23-3L and TO-92 Packages.
Applications
¾
¾
¾
¾
CD/DVD-ROM, CD/RW
Wireless LAN card, Keyboard, Mouse
Battery Powered Equipments
PCMCIA Card
Ordering/Marking Information
Package
Ordering Information
Marking Information
SE5167AHN
YYWW-LF
3.3V SE5167AHN-LF
SE5167BHN
YYWW-LF
2.8V SE5167BHN-LF
2.5V SE5167CHN-LF
1.8V SE5167DHN-LF
1.5V SE5167EHN-LF
SE5167CHN
YYWW-LF
SE5167DHN
YYWW-LF
SE5167EHN
YYWW-LF
SE5167FHN
YY: year code
YYWW-LF
3.0V
SE5167FHN-LF
WW: week code.
SE5167AHG
LF: lead free.
3.3V SE5167AHG-LF
2.8V SE5167BHG-LF
2.5V SE5167CHG-LF
1.8V SE5167DHG-LF
1.5V SE5167EHG-LF
3.0V SE5167FHG-LF
YYWW-LF
SE5167BHG
YYWW-LF
SE5167CHG
YYWW-LF
SE5167DHG
YYWW-LF
SE5167EHG
YYWW-LF
SE5167FHG
YYWW-LF
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 1
Ordering/Marking Information (Continued)
Package
Ordering Information
Marking Information
3.3V
2.8V
2.5V
1.8V
1.5V
3.0V
3.3V
2.8V
SE5167ALN-LF
SE5167BLN-LF
SE5167CLN-LF
SE5167DLN-LF
SE5167ELN-LF
SE5167FLN-LF
SE5167ALG-LF
SE5167BLG-LF
167AN_
167BN_
167CN_
167DN_
167EN_
167FN_
167AG_
167BG_
167CG_
167DG_
167EG_
167FG_
Starting with 1, a bar on top of 1 is
for production year 2001, and
underlined 1 is for year 2002. The
next character is marked on top for
2003, and underlined for 2004. The
naming pattern continues with
consecutive characters for later
years.
The last character is the week
code. (A-Z: 1-26, a-z: 27-52)
A dot on top right corner is for
lead-free process.
2.5V SE5167CLG-LF
1.8V SE5167DLG-LF
1.5V
3.0V
SE5167ELG-LF
SE5167FLG-LF
LF: lead free.
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 2
Absolute Maximum Ratings(1)
Operating Ratings(2)
Supply Input Voltage (VIN) ..……...……………....+6V
Power Dissipation (PD) ……….. Internally Limited (3)
Junction Temperature (TJ) …….….... 0°C to +125°C
Lead Temperature (soldering, 5 sec.) …....…. 260°C
Storage Temperature (TS) ……….. -40°C to +150°C
Supply Input Voltage (VIN) ……...….. +2.8V to +6V
Junction Temperature (TJ) …….….. 0°C to +125°C
Package Thermal Resistance
160°C/W (TO-92)
250°C/W (SOT-23-3L)
Electrical Characteristics
VIN = 5V; CIN = 2.2µF; COUT = 2.2µF(Electrolytic capacitor); IOUT = 10mA; TJ = 25°C, unless otherwise specified.
Symbol
Parameter
Conditions
SE5167 – 1.5V(VIN=1.8V,IOUT=1mA)
SE5167 – 1.8V(VIN=3.3V,IOUT=10mA)
SE5167-2.5V
Min
Typ
1.5
1.8
2.5
2.8
3.0
3.3
Max
Units
1.470
1.764
2.450
2.744
2.940
3.234
1.530
1.836
2.550
2.856
3.060
3.366
Output Voltage
Accuracy
VOUT
V
SE5167-2.8V
SE5167-3.0V
SE5167-3.3V
Output Voltage
Temperature
Coefficient
mV/℃
∆VOUT /∆T
Note 4
--
0.025
--
∆VOUT / VOUT
∆VOUT / VOUT
Line Regulation
VIN = (VOUT+0.8)V or 2.5V to 5.5V
VIN = (VOUT+0.8)V or 2.5V
IOUT =1mA to 300mA
IOUT =10mA
--
--
1.0
--
--
%/V
Load Regulation(5)
Dropout Voltage(6)
Thermal Protection
0.003
%/mA
--
--
--
--
--
--
--
--
15
175
380
150
20
--
--
--
--
--
--
--
--
VIN - VOUT
mV
IOUT =150mA
IOUT =300mA
℃
℃
Thermal Protection Temperature
Protection Hysterisys
f =120Hz
TPROTECTION
PSRR
IGROUND
ILIMIT
Ripple Rejection
Ground Current
Current Limit
59
dB
uA
mA
IOUT =10mA
65
VOUT =0V
600
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 3
Note 1: Exceeding the absolute maximum rating may damage the device.
Note 2: The device is not guaranteed to function outside its operating rating.
Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD(MAX) = (TJ(MAX)
- TA)/θJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the
regulator will go into thermal shutdown. See Table 1 and the “Thermal Considerations” section for details.
Note 4: Output voltage temperature coefficient is the worst-case voltage change divided by the total temperature range.
Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for
load regulation in the load range from 100µA to 300mA. Changes in output voltage due to heating effects are
covered by the thermal regulation specification.
Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its
nominal value measured at 1V differential.
Note 7: The Cin or Cout should be chosen carefully. Please refer to the Application Hints
Typical Application
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 4
Line Regulation (VOUT = 3.3V)
Load Regulation (VOUT = 3.3V)
(VIN = 4.3V to 6V, IOUT = 1mA)
(VIN = 5V, IOUT = 1mA to 500mA)
3.6000
3.5000
3.4000
3.3000
3.2000
3.1000
3.0000
3.600
3.500
3.400
3.300
3.200
3.100
3.000
0
100
200
300
400
500
4.2
4.7
5.2
5.7
VIN (V)
IOUT (mA)
IQ vs IOUT (VOUT = 3.3V)
(VIN = 5V, IOUT = 10mA to 500mA)
Output Voltage vs Temperature
(VIN = 5V, IOUT = 10mA)
160
140
120
100
80
3.330
3.320
3.310
3.300
3.290
3.280
3.270
60
40
20
0
20
40
60
80
100
120
0
0
100
200
300
400
500
Temperature (C)
IOUT (mA)
Transient Response (VOUT = 1.5V)
PSRR (VOUT = 3.3)
(IOUT = 1mA to 150mA)
(VIN = 5V, VPP = 1V)
70
60
50
40
30
20
10
0
100
1000
10000
Frequency (Hz)
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 5
Application Hints
Thermal Consideration
Like any Low dropout regulator, SE5167 requires It is important that the thermal limit of the package
external capacitors to ensure stability. The external should not be exceeded. The SE5167 has built-in
capacitors must be carefully selected to ensure the thermal protection. When the thermal limit is
performances.
exceeded, the IC will enter protection, and the VOUT
will be reset to zero. The power dissipation for a
given application can be calculated as follows:
Input Capacitor:
An Input Capacitor of at least 2.2uF is required. The
inexpensive Electrolytic capacitor is preferred. The The Power Dissipation (PD) is
value can be increased without upper limit.
PD = IOUT * [VIN – VOUT]
The thermal limit of the package is then limited to
PD(MAX) = [TJ – TA]/θJA where TJ is the junction
temperature, TA is ambient temperature, and θJA is
Output Capacitor:
An Output Capacitor is required for look stability. It
must be located no more than 1cm away from the
VOUT pin, and connected directly between VOUT and around 250°C/W for SE5167. SE5167 is designed
GND pins. The inexpensive Electrolytic capacitor is to enter thermal protection at 150°C. For example, if
recommended. The minimum value is 2.2uF but TA is 25°C then the max PD is limited to about 0.5W.
once again its value can be increased without limit.
In other words, if IOUT(MAX) = 300mA, then [VIN
OUT] can not exceed 1.67V.
–
V
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 6
OUTLINE DRAWING SOT-23-3L (SC-59)
C
DIMENSIONS
INCHES
MIN MAX MIN MAX
J
MM
H
B
N
DIM
0.110 0.120 2.80
0.047 0.055 1.20
0.083 0.104 2.10
0.035 0.040 0.89
0.070 0.080 1.78
0.018 0.024 0.45
0.015 0.020 0.37
0.0005 0.004 0.013 0.10
0.034 0.040 0.887 1.02
0.003 0.007 0.085 0.18
3.04
1.40
2.64
1.03
2.05
0.60
0.51
A
B
C
D
E
F
G
H
J
D
A
E
G
F
K
K
L
L
-
0.027
-
0.69
OUTLINE DRAWING TO-92
A
DIMENSIONS
INCHES
MM
N
B
D
DIM
MIN MAX MIN MAX
0.175 0.205 4.445 5.207
0.170 0.210 4.318 5.334
0.500 0.610 12.70 15.50
0.016 0.021 0.407 0.533
0.045 0.055 1.143 1.397
0.095 0.105 2.413 2.667
0.080 0.105 2.032 2.667
0.125 0.165 3.175 4.191
A
B
E
F
G
H
J
E
G
F
H
K
K
J
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 7
Customer Support
Seaward Electronics Incorporated – China
Section B, 2nd Floor, ShangDi Scientific Office Complex, #22 XinXi Road
Haidian District, Beijing 100085, China
Tel: 86-10-8289-5700/01/05
Fax: 86-10-8289-5706
Seaward Electronics Corporation – Taiwan
2F, #181, Sec. 3, Minquan East Rd,
Taipei, Taiwan R.O.C
Tel: 886-2-2712-0307
Fax: 886-2-2712-0191
Seaward Electronics Incorporated – North America
1512 Centre Pointe Dr.
Milpitas, CA95035, USA
Tel: 1-408-821-6600
Last Updated - 1/4/2010
Revision 1/4/2010
Preliminary and all contents are subject to change without prior notice.
© Seaward Electronics, Inc., 2006. • www.seawardinc.com.cn • Page 8
相关型号:
©2020 ICPDF网 联系我们和版权申明