SS443ESOT [SECELECTRONICS]
Unipolar Hall-Effect Digital Switch;型号: | SS443ESOT |
厂家: | SEC Electronics Inc. |
描述: | Unipolar Hall-Effect Digital Switch |
文件: | 总6页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SS443
Unipolar Hall-Effect Digital Switch
Features and Benefits
Application Examples
–
–
–
–
–
–
–
–
–
4.5V to 24V Operation
-40°C to 150°C Superior temperature operation
Bipolar technology
Open-collector 25 mA output
Reverse battery protection
Small Size SOT23 3L or SIP 3L
Solid-state reliability
Resistant to physical stress
Activate with small, commercially available
Permanent magnets
−
−
−
−
−
−
−
Automotive, Consumer and Industrial
Solid-state switch
Brushless DC motor commutation
Speed detection
Linear position detection
Angular position detection
Proximity detection
3 pin SOT23 (suffix SO)
3 pin SIP (suffix UA)
Functional Block Diagram
VDD
Voltage
Regulatr
OUT
Chopper
Hall
Plate
GND
SIP Package
Pin 1 – VDD
Pin 2 – GND
Pin 3 – OUT
SOT Package
Pin 1 – VDD
Pin 2 – OUT
Pin 3 – GND
1
V3.10 Nov 1, 2013
SS443
Unipolar Hall-Effect Digital Switch
General Description
The SS443 is a unipolar Hall-effect sensor IC fabricated
from bipolar technology. The device integrates a volt-
age regulator, reverse battery protection diode, Hall
sensor with dynamic offset cancellation system, tem-
perature compensation circuitry, small signal amplifier,
Schmitt trigger and an open-collector output to sink up
to 25 mA. With suitable output pull up, they can be
used with bipolar or CMOS logic circuits.
+150°C,and are more stable with both temperature and
supply voltage changes. The unipolar switching charac-
teristic makes these devices ideal for use with a simple
bar or rod magnet.
Thanks to its wide operating voltage range and extend-
ed choice of temperature range, it is quite suitable for
use in automotive, industrial and consumer applications.
The device is delivered in a Small Outline Transistor
(SOT) or in a Plastic Single In Line (SIP 3L flat). Both
3-lead packages are RoHS compliant.
These Hall-effect switches are monolithic integrated
circuits with tighter magnetic specifications, designed to
operate continuously over extended temperatures to
Glossary of Terms
MilliTesla (mT), Gauss Units of magnetic flux density: 1mT = 10 Gauss
RoHS Restriction of Hazardous Substances
Operating Point (BOP) Magnetic flux density applied on the branded side of the package which turns the output
driver ON (VOUT = VDSon
)
Release Point (BRP)
Magnetic flux density applied on the branded side of the package which turns the output
driver OFF (VOUT = high)
2
V3.10 Nov 1, 2013
SS443
Unipolar Hall-Effect Digital Switch
Pin Definitions and Descriptions
SOT Pin № SIP Pin №
Name
VDD
Type
Supply
Output
Ground
Function
Supply Voltage pin
Open Drain Output pin
Ground pin
1
2
3
1
3
2
OUT
GND
Absolute Maximum Ratings
Symbol
VDD
IDD
Parameter
Value
Units
V
Supply Voltage
Supply Current
28
50
28
50
mA
V
VOUT
IOUT
TS
Output Voltage
Output Current
mA
Storage Temperature Range
-65 to 170
°C
Symbol
TA
Operating Temperature Range
Temperature Suffix “E”
Temperature Suffix “K”
Temperature Suffix “L”
Value
Units
°C
-40 to 85
-40 to 150
-40 to 150
TA
°C
TA
°C
Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute-maximum- rated conditions for ex-
tended periods may affect device reliability
.
3
V3.10 Nov 1, 2013
SS443
Unipolar Hall-Effect Digital Switch
General Electrical Specifications
DC Operating Parameters TA = 25°C, VDD= 4.5V to 24V (unless otherwise specified)
Typ
Parameter
Symbol Test Conditions
Min
4.5
4
Max
24
Units
V
VDD
IDD
Supply Voltage
Operating
5
B <
BRP
Supply Current
7
mA
V
0.3
VDSon
IOFF
IOUT = 20mA, B >
Output Saturation Voltage
Output Leakage Current
Output Rise Time
Output Fall Time
0.5
10
BOP
B <
VOUT = 24V
0.1
BRP
µA
µs
2.0
2.0
t
0.04
0.18
r
RL = 820Ω, CL = 20pF
RL =820Ω, CL = 20pF
t
f
µs
Magnetic Specifications
DC Operating Parameters VDD = 4.5V to 24V (unless otherwise specified)
Package
Parameter
Symbol
BOP
Test Conditions
Min
Typ
Max
190
Units
Operating Point
Release Point
Hysteresis
150
170
125
45
G
G
G
G
G
G
UA
BRP
Ta=25°C,Vdd=12V DC 100
160
BHYST
BOP
Operating Point
Release Point
Hysteresis
-190
-170
-125
45
-150
-100
SO
BRP
Ta=25°C,Vdd=12V DC -160
BHYST
Output Behavior versus Magnetic Pole
DC Operating Parameters TA = -40°C to 150°C, VDD = 4.5V to 24V (unless otherwise specified)
Test Conditions (UA) Test Conditions (SO)
OUT
High
Low
B < BRP
B > BOP
B > BRP
B < BOP
The SOT-23 device is reversed from the UA package. The SOT-23 output transistor will be turned on(drops low) in the presence of a
sufficiently strong North pole magnetic field applied to the marked face.
4
V3.10 Nov 1, 2013
SS443
Unipolar Hall-Effect Digital Switch
Application Information
Package Information
Package UA, 3-Pin SIP:
2.13
3° ± 1°
1.00
1.20
45° ± 1°
4.0 ± 0.01
2
3
Sensor Location
0.84(Nom)
6° ± 1°
Active Area Depth:
3° ± 1°
0.44± 0.01
3
6° ± 1°
3° ± 1°
0.05 ± 0.05
0.39± 0.01
0.38 ± 0.01
Notes:
1). Controlling dimension : mm ;
2). Leads must be free of flash and plating voids ;
3). Do not bend leads within 1 mm of lead to package
interface ;
4). PINOUT: Pin 1 VDD
Pin 2 GND
Pin 3 Output
1.27
2.54
5
V3.10 Nov 1, 2013
SS443
Unipolar Hall-Effect Digital Switch
Package SO, 3-Pin SOT-23:
Notes
1). PINOUT: Pin 1 VDD
Pin 2 Output
Top
3
Pin 3 GND
2). All dimensions are in millimeters;
2.60
3.00
1.50
1.80
1
2
1.70
2.10
Side Vie
End
2.70
3.10
0.10
0.25
1.00
1.30
0.70
0.90
0.20
Min
0.00
0.10
0.35
0.50
Ordering Information
Part No.
Pb-free
YES
YES
YES
YES
YES
YES
Temperature Code
-40°C to 85°C
Package Code
SOT-23
TO-92
Packing
SS443ESOT
SS443EUA
SS443KSOT
SS443KUA
SS443LSOT
SS443LUA
7-in. reel, 3000 pieces/ reel
Bulk, 1000 pieces/ bag
7-in. reel, 3000 pieces/ reel
Bulk, 1000 pieces/ bag
7-in. reel, 3000 pieces/ reel
Bulk, 1000 pieces/ bag
-40°C to 85°C
-40°C to 125°C
-40°C to 125°C
-40°C to 150°C
-40°C to 150°C
SOT-23
TO-92
SOT-23
TO-92
6
V3.10 Nov 1, 2013
相关型号:
©2020 ICPDF网 联系我们和版权申明