S1T98B00W10D0 [SEIKO]
SPECIALTY CONSUMER CIRCUIT, UUC21, DIE-21;型号: | S1T98B00W10D0 |
厂家: | SEIKO EPSON CORPORATION |
描述: | SPECIALTY CONSUMER CIRCUIT, UUC21, DIE-21 商用集成电路 |
文件: | 总24页 (文件大小:215K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
-
MF1585 01
Intelligent Network Controller for Embedded System
S1T98B00 B/S1T98B00 D Series
*** ***
Technical Manual
NOTICE
No part of this material may be reproduced or duplicated in any form or by any means without the written
permission of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice.
Seiko Epson does not assume any liability of any kind arising out of any inaccuracies contained in this material
or due to its application or use in any product or circuit and, further, there is no representation that this material
is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to
any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty
that anything made in accordance with this material will be free from any patent or copyright infringement of a
third party. This material or portions thereof may contain technology or the subject relating to strategic
products under the control of the Foreign Exchange and Foreign Trade Law of Japan and may require an export
license from the Ministry of International Trade and Industry or other approval from anther government agency.
All other product names mentioned herein are trademarks and/or registered trademarks of their respective
companies.
©SEIKO EPSON CORPORATION 2003, All rights reserved.
Configuration of product number
zDEVICES
S1
T
98B00 *
****
00
Packing specifications
00: Besides tape & reel
0A: TCP BL 2 directions
0B: Tape & reel Back
0C: TCP BR 2 directions
0D: TCP BT 2 directions
0E: TCP BD 2 directions
0F: Tape & reel FRONT
0G: TCP BT 4 directions
0H: TCP BD 4 directions
0J: TCP SL 2 directions
0K: TCP SR 2 directions
0L: Tape & reel LEFT
0M:TCP ST 2 directions
0N: TCP SD 2 directions
0P: TCP ST 4 directions
0Q: TCP SD 4 directions
0R: Tape & reel RIGHT
99: Specs not fixed
Specifications
Shape
W : Wafer
D : Die
M : SOP/SSOP
Model number
Model name
(T : Clock)
Product classification
(S1:Semiconductors)
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
CONTENTS
1. DESCRIPTION....................................................................................................................................1
1.1 Features......................................................................................................................................1
1.1.1 S1T98B00W B0/S1T98B00D B0/S1T98B00M B1...............................................1
**
**
**
1.1.2 S1T98B00W D0/S1T98B00D D0/S1T98B00M D1 ..............................................1
**
**
**
1.2 Model Numbers ..........................................................................................................................2
2. BLOCK DIAGRAM .............................................................................................................................3
2.1 S1T98B00W B0/S1T98B00D B0/S1T98B00M B1.............................................................3
**
**
**
2.2 S1T98B00W D0/S1T98B00D D0/S1T98B00M D1 ............................................................3
**
**
**
3. PAD LAYOUT AND PIN ASSIGNMENT ............................................................................................4
3.1 Pad Layout of S1T98B00W 0/S1T98B00D 0....................................................................4
***
***
3.2 Pad coordinates of S1T98B00W 0/S1T98B00D 0............................................................5
***
***
3.3 Cross-Sectional Dimensions ......................................................................................................5
3.4 Pad Dimensions .........................................................................................................................5
3.5 Pin Assignment of S1T98B00M B1 (SOP3A-16) ....................................................................6
**
3.6 Pin Assignment of S1T98B00M D1 (SSOP2-16)....................................................................6
**
4. PIN DESCRIPTION.............................................................................................................................7
4.1 Pin Description ...........................................................................................................................7
4.2 Series Name - Pin Number Correspondence Table...................................................................8
4.3 Relationship Between Input Pins (PWDX, XX, and XN) and Power Supply .............................9
5. FUNCTIONAL DESCRIPTION ...........................................................................................................9
6. ABSOLUTE MAXIMUM RATINGS...................................................................................................10
7. ELECTRICAL CHARACTERISTICS................................................................................................10
7.1 Operating Range ......................................................................................................................10
7.2 DC Characteristics....................................................................................................................10
7.3 AC Characteristics....................................................................................................................11
7.3.1 Frequency characteristic of crystal oscillator section output (OUT32K)....................11
7.3.2 Clock characteristics of crystal oscillator section output (OUT32K) ..........................11
7.3.3 Frequency characteristic of PLL oscillator section output (OUT)...............................11
7.3.4 Clock characteristic of PLL oscillator section output (OUT).......................................12
8. PERIOD JITTERS.............................................................................................................................14
9. EXTERNAL CONNECTION EXAMPLES.........................................................................................14
9.1 Reference External Connection Example 1.............................................................................14
9.2 Reference External Connection Example 2.............................................................................15
9.3 Implementation Guidelines.......................................................................................................16
10. PACKAGE OUTLINE DIMENSIONS................................................................................................17
10.1 SOP3A-16.................................................................................................................................17
10.2 SSOP2-16.................................................................................................................................18
Rev.1.0
EPSON
i
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
1. DESCRIPTION
The S1T98B00 B and S1T98B00 D Series are 32768Hz PLL oscillators that output PLL oscillation by
*** ***
externally providing 32768Hz crystals.
There are four types of packages - WAFER (S1T98B00W 0), CHIP (S1T98B00D 0), SOP3A-16
***
***
(S1T98B00M B1), and SSOP2-16 (S1T98B0M D1) - to choose from to your specific applications.
** **
The CMOS IC for these series contains a crystal oscillator circuit. Externally attaching a crystal oscillator to
the built-in crystal oscillator circuit allows any of these series to output PLL oscillation and 32768Hz clocks
from 32768Hz oscillation source.
1.1 Features
1.1.1 S1T98B00W B0/S1T98B00D B0/S1T98B00M B1
**
**
WAFER
CHIP
**
(S1T98B00W B0)
• Shipping forms
**
(S1T98B00D B0)
**
SOP3A-16pin
(S1T98B00M B1)
**
• 2 types of outputs - crystal oscillation and PLL oscillation
• Inputs
• PLL oscillator output frequency
External 32768Hz crystal inputs or 32768Hz clock inputs
32768Hz × N ÷ X
(N = 763 to 2137, X = 1 to 16)
The number of N, X is variable via mask option.
The output frequencies are determined by 2 bits (XN and XX pins).
CMOS
• Output level
• Output buffer driving capability
• Operating supply voltage
CL = 15pF (CMOS load)
When crystal oscillator section operates: 1.8 to 3.6V
When PLL oscillator section operates: 2.7 to 3.6V
VBK x x x Power supply for crystal oscillator section
VDD x x x Power supply for PLL oscillator section
(VBK = VDD when PLL oscillator operates.)
• Power supply
• Contains resistors and capacitors for crystal oscillator and DC cut capacitors for XG pin
• Contains a low pass filter for PLL oscillation
• PLL oscillator section is provided with a power-down pin
1.1.2 S1T98B00W D0/S1T98B00D D0/S1T98B00M D1
**
**
WAFER
CHIP
**
(S1T98B00W D0)
• Shipping forms
**
(S1T98B00D D0)
**
SSOP2-16pin
(S1T98B00M D1)
**
• 2 types of outputs - crystal oscillation and PLL oscillation
• Inputs
• PLL oscillator output frequency
External 32768Hz crystal inputs or 32768Hz clock inputs
32768Hz × N ÷ X
(N = 763 to 2137, X = 1 to 16)
The number of N, X is variable via mask option.
CMOS
• Output level
• Output buffer driving capability
• Operating supply voltage
CL = 15pF (CMOS load)
When crystal oscillator section operates: 1.8 to 3.6V
When PLL oscillator section operates: 2.7 to 3.6V
VBK x x x Power supply for crystal oscillator section
VDD x x x Power supply for PLL oscillator section
(VBK = VDD when PLL oscillator operates.)
• Power supply
• Contains resistors and capacitors for crystal oscillator and DC cut capacitors for XG pin
• PLL oscillator section is provided with a power-down pin (the crystal oscillator section is always enabled as
long as power is applied.)
• Contains a low pass filter for PLL oscillation
Rev.1.0
EPSON
1
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
1.2 Model Numbers
The following model numbers will be provided.
Number of output 32768Hz crystal 32768Hz crystal
Output
frequency
Model Numbers
frequencies
selected
4
oscillation
circuit
oscillator
outputs
Provided
Package
S1T98B00W10B0
48005120Hz
36012032Hz
12001280Hz
9003008Hz
48005120Hz
36012032Hz
12001280Hz
9003008Hz
48005120Hz
36012032Hz
12001280Hz
9003008Hz
48005120Hz
Can be used by
WAFER
(Selected by 2 bits, connecting a
XN and XX pins.) 32768Hz crystal
oscillator.
S1T98B00D10B0
S1T98B00M10B1
S1T98B00W10D0
S1T98B00D10D0
S1T98B00M10D0
4
Can be used by
Provided
Provided
Provided
Provided
Provided
CHIP
SOP3A-16
WAFER
CHIP
(Selected by 2 bits, connecting a
XN and XX pins.) 32768Hz crystal
oscillator.
4
Can be used by
(Selected by 2 bits, connecting a
XN and XX pins.) 32768Hz crystal
oscillator.
1
1
1
Can be used by
connecting a
32768Hz crystal
oscillator.
Can be used by
connecting a
32768Hz crystal
oscillator.
Can be used by
connecting a
32768Hz crystal
oscillator.
48005120Hz
48005120Hz
SSOP2-16
2
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
2. BLOCK DIAGRAM
2.1 S1T98B00W B0/S1T98B00D B0/S1T98B00M B1
** ** **
VBK
OUT32K
VDD
VREG
XG
XD
Level
shifter
OSC
Low
X
Phase
1/2
OUT
Pass
Filter
VCO
Divider
Ditector
N
1/2
Divider
XN
XX
VSS
PWDX
2.2 S1T98B00W D0/S1T98B00D D0/S1T98B00M D1
** ** **
VBK
OUT32K
VDD
VREG
XG
XD
Level
shifter
OSC
Low
X
Phase
1/2
OUT
Pass
Filter
VCO
Divider
Ditector
N
1/2
Divider
VSS
PWDX
Rev.1.0
EPSON
3
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
3. PAD LAYOUT AND PIN ASSIGNMENT
3.1 Pad Layout of S1T98B00W
0/S1T98B00D 0
***
***
13
12
11
OUT
16
TSEN
15
SNX
14
TS[0]
VDD
VDD
17
PWDX
10
18
XN
TS[3]
Y=1900
9
(0,0)
19
TS[2]
XX
8
20
TS[1]
V
C
7
21
V
REG
VSS
1
2
3
4
5
6
V
SS
V
BK
PWDX32
OUT32K
XD
XG
X=2000
Chip size is the value of the scribe line centered.
VSS across 1 and 21 should be internally shorted.
VDD across 12 and 13 should be internally shorted.
4
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
3.2 Pad coordinates of S1T98B00W
0/S1T98B00D 0
***
***
Unit : µm
No.
1
Pin name
X
Y
VSS
VBK
-744.975
-513.975
-279.300
-44.625
190.050
424.725
858.375
858.375
858.375
858.375
277.050
4.575
-230.100
-461.550
-606.600
-751.650
-844.650
-844.650
-844.650
-858.375
-844.650
-794.625
-794.625
-794.625
-794.625
-794.625
-794.625
-235.575
-90.525
54.525
199.575
753.525
794.625
794.625
808.350
808.350
808.350
276.225
41.550
2
3
PWDX32
OUT32K
XD
4
5
6
XG
7
VREG
TS[1]
TS[2]
TS[3]
OUT
VDD
8
9
10
11
12
13
14
15
16
17
18
19
20
21
VDD
TS[0]
SNX
TSEN
PWDX
XN
XX
-193.050
-395.700
-543.975
VC
VSS
Zero position: Chip center
VSS across 1 and 21 should be internally shorted.
VDD across 12 and 13 should be internally shorted.
3.3 Cross-Sectional Dimensions
400 ± 30
Max. 50
Max. 30
Unit: µm
3.4 Pad Dimensions
Pad pitch: 230µm (Min.)
Pad opening: 90µm × 90µm
Rev.1.0
EPSON
5
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
3.5 Pin Assignment of S1T98B00M B1 (SOP3A-16)
**
16
9
Pin No.
Pin Name
Pin No.
9
Pin Name
OUT32K
XG
1
2
3
4
5
6
7
8
VDD
10
PWDX
XN
11
XD
12
XX
13
VSS
14
VBK
15
OUT
(TEST)
16
Note: Pin 8 is a test pin that is provided with a
PULL DOWN.
1
8
Leave it unconnected (floating).
3.6 Pin Assignment of S1T98B00M D1 (SSOP2-16)
**
16
9
Pin No.
Pin Name
VSS
Pin No.
9
Pin Name
1
2
3
4
5
6
7
8
VBK
10
(TEST)
OUT32K
XD
11
12
OUT
VDD
PWDX
INDEX
13
XG
14
15
16
(TEST)
Note: Pins 3 and 16 are test pins that are provided
with a PULL DOWN.
1
8
Leave it unconnected (floating).
6
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
4. PIN DESCRIPTION
4.1 Pin Description
Pin Name
I/O
Function
VDD
+ power Power supply to PLL section VDD = 2.7 to 3.6V
supply
VBK
VSS
+ power Power supply to crystal oscillator section VBK = 1.8 to 3.6V
supply
- power VSS = 0V
supply
XG
I
Gate input for crystal oscillator
x Connect to one end of the 32.768kHz crystal oscillator.
Drain output for crystal oscillator
XD
O
O
I
x Connect to one end of the 32.768kHz crystal oscillator.
32.768kHz crystal oscillator signal output
OUT32K
PWDX32
x Electrostatic protection is provided between this pin and VBK.
Test pin
(Leave it unconnected, or floating).
PLL oscillator signal output.
OUT
PWDX
O
I
When input is LOW → the PLL oscillator circuit stops.
When input is HIGH → the PLL oscillator circuit starts.
Since no internal terminal processing (PULL UP or PULL DOWN) is carried out, this pin
must be tied HIGH or LOW.
x Electrostatic protection is provided between this pin and VBK.
XN
XX
I
I
S1T98B00 B → Pin that selects the divider setting for the divider at PLL oscillator
*** *
feedback side.
Since no internal terminal processing (PULL UP or PULL DOWN) is carried out, this pin
must be tied HIGH or LOW.
(For details, see Section 5. FUNCTIONAL DESCRIPTION.)
x This pin must be left open for the S1T98B00***D*.
(This pin must be left floating for the S1T98B00***D*.)
x Electrostatic protection is provided between this pin and VBK.
S1T98B00 B → Pin that selects the divider setting for the divider at PLL oscillator
*** *
output side.
Since no internal terminal processing (PULL UP or PULL DOWN) is carried out, this pin
must be tied HIGH or LOW.
(For details, see Section 5. FUNCTIONAL DESCRIPTION.)
x This pin is to be used as a test pin for the S1T98B00***D*.
(This pin must be left floating for the S1T98B00***D*.)
x Electrostatic protection is provided between this pin and VBK.
Pin that monitors the operating voltage (approx. 1.4V) of oscillator section.
VREG
VC
O
(TEST) (Leave it unconnected, or floating).
O
Pin that monitors the output of charge pump in the PLL oscillation circuit.
(TEST) (Leave it unconnected, or floating)
Enable test mode.
(TEST) (Leave it unconnected, or floating)
Test inputs.
(TEST) (Leave it unconnected, or floating)
Test input.
(TEST) (Leave it unconnected, or floating)
TSEN
TS[0] to [3]
SNX
I
I
I
Rev.1.0
EPSON
7
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
4.2 Series Name - Pin Number Correspondence Table
S1T98B00W B0
S1T98B00W D0
**
**
(Wafer)
(Wafer)
S1T98B00D B0
S1T98B00D D0
**
**
Pin Name
I/O
(CHIP)
(CHIP)
S1T98B00M B1
S1T98B00M D1
**
**
(SOP3A-16)
(SSOP2-16)
VDD
VBK
VSS
+ power
{
{
supply
+ power
{
{
{
{
supply
- power
supply
XG
XD
OUT32K
PWDX32
OUT
PWDX
XN
I
{
{
{
{
{
{
O
O
I
O
{
{
{
{
{
{
I
I
XX
VREG
I
O
(TEST)
VC
TSEN
O
(TEST)
I
(TEST)
TS[0] to [3]
SNX
I
(TEST)
I
(TEST)
8
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
4.3 Relationship Between Input Pins (PWDX, XX, and XN) and Power Supply
Note that XX and XN pins are only applicable to the S1T98B00W10B0, S1T98B00D10B0, and
S1T98B00M10B1.
VDD
VBK
Electrostatic
protection
circuit
Internal circuit
Electrostatic
protection
circuit
VSS
5. FUNCTIONAL DESCRIPTION
• Selection of PLL output frequencies (applicable to S1T98B00W10B, S1T98B00D10B0, and S1T98B00M10B1
only)
The PLL output frequency can be set via XN and XX pins as shown below.
N
PLL output frequency = 32768×
(Hz)
X
XN
0
XX
0
F(IN) (Hz)
32768
N
X
4
1
4
1
F(VCO) (Hz)
72,024,064
72,024,064
96,010,240
96,010,240
F(OUT) (Hz)
9,003,008
36,012,032
12,001,280
48,005,120
1099
1099
1465
1465
0
1
32768
1
1
0
1
32768
32768
• Asserting PWDX pin low stops the PLL oscillator circuit (OUT pin output = LOW).
• External component for the oscillator section x x x Crystal oscillator (32.768kHz)
Rev.1.0
EPSON
9
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
6. ABSOLUTE MAXIMUM RATINGS
VSS = 0V
Parameter
Supply voltage
Symbol
VDD
Condition
Min.
-0.3
Typ.
Max.
4.5
Unit
V
VBK
-0.3
4.5
V
Input voltage
Storage temperature
VIN
TSTG
VSS-0.3
-55
VBK+0.3
+125
V
°C
7. ELECTRICAL CHARACTERISTICS
7.1 Operating Range
VSS = 0V
Parameter
Supply voltage
Symbol
VDD
Condition
Min.
2.7
Typ.
Max.
3.6
Unit
V
VBK
1.8
3.6
V
Supply voltage with PLL running
Output load
VBKP
VBK pin
VDD-0.1
VDD+0.1
15
V
CL32K OUT32K pin, CMOS load
pF
pF
°C
CLPLL
TSTG
OUT pin, CMOS load
15
85
Operating temperature
-40
Note: VBK should be kept equal to VDD when PLL is running.
7.2 DC Characteristics
(No load unless otherwise specified, VSS = 0V, VBK = VDD = 2.7 to 3.6V, Ta = -40 to +85°C)
Parameter
Current consumption 1 (when
PLL operation is stopped)
Current consumption 2 (when
PLL operation is stopped)
Input HIGH voltage
Symbol
Condition
VBK = 1.8 to 3.6V,
VDD = 0V
Min.
Typ.
Max.
Unit
IOP1
3
µA
VBK = VDD = 2.7 to 3.6V,
PWDX = HIGH
PWDX, XX and XN pins
PWDX, XX and XN pins
IOP2
15
mA
VIH
VIL
0.8VDD
-0.3
VDD+0.2
0.2VDD
V
V
Input LOW voltage
Output HIGH voltage,
crystal oscillator output
Output LOW voltage,
crystal oscillator output
Output HIGH voltage,
PLL oscillator output
VOH1
VOL1
VOH2
VOL2
ILK
OUT32K pin, IOH = 100µA VBK-0.4
V
OUT32K pin, IOL = 100µA
0.4
V
OUT pin, IOH = 4mA
OUT pin, IOL = -4mA
VDD-0.4
V
Output LOW voltage,
PLL oscillator output
0.4
0.5
V
PWDX, XX and XN pins
VIN = VDD or VSS
Input leak current
-0.5
10
µA
Between TSEN, TST0,
TST1, TST2, TST3, SNX,
PWDX32 and VSS
Test pin (pull down resistor)
Test pin (pull down resistor 2)
Rpd
Rpd2
Rleak
300
300
1000
1000
kΩ
kΩ
Between XX and VSS for
10
the S1T98B00
D
*** *
Insert a resistor between
XG-VBK, VSS and
XD-VBK, VSS
Acceptable leak resistor value
for XG and XD pins
200
MΩ
10
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
7.3 AC Characteristics
The AC characteristics shown below are those characteristics which are presented when Seiko Epson C-004SH
(R1 = 50kΩ Max.) is connected to the S1T98B00M 1.
***
(R1 value = Equivalent series resistance; CL value = Load resistance)
The following characteristics are not guaranteed if any other crystal oscillators or external clocks are used.
7.3.1 Frequency characteristic of crystal oscillator section output (OUT32K)
(Unless otherwise specified, VSS = 0V, VBK = 3.0V, Ta = 25°C)
Parameter
Output frequency
Output frequency accuracy
Temperature characteristics of
frequency
Symbol
fo
Condition
Min.
Typ.
32.768
0
Max.
Unit
kHz
ppm
∆ fo
-95
105
10
Tf
Ta = -40 to +85°C
-170
0
ppm
Voltage characteristics of
frequency
f/V
VBK = 1.8 to 3.6V
-2
0
2
ppm/V
7.3.2 Clock characteristics of crystal oscillator section output (OUT32K)
(Unless otherwise specified, VSS = 0V, VBK = 1.8 to 3.6V, Ta = -40 to +85°C)
Parameter
Symbol
tr1
Condition
Min.
Typ.
Max.
100
100
60
Unit
ns
ns
%
Output rise time
Output fall time
20% → 80%
tf1
80% → 20%
DUTY
tw / t1
VTH = VBK/2
40
50
Time to start oscillation (Note 1)
Tsta1
VBK = 0 → 1.8 to 3.6V
3
s
Note 1: The above Tsta1 (time to start oscillation) defines the time the crystal oscillation output falls within fo ±
1%.
7.3.3 Frequency characteristic of PLL oscillator section output (OUT)
(Unless otherwise specified, VSS = 0V, VBK = VDD = 3.0V, Ta = 25°C)
Parameter
Output frequency
Symbol
fpll
Condition
N = 1465 or 1499,
X = 1 or 4
Min.
Typ.
Max.
Unit
kHz
ppm
ppm
32.768*N/X
Output frequency
Temperature characteristics of
frequency
∆ fpll
Tfpll
-95
0
0
105
10
Ta = -40 to +85°C
-170
Voltage characteristics of
frequency
fpll/V
VBK = VDD = 2.7 to 3.6V
-2
0
2
ppm/V
ps
Period jitter for 48MHz output
VBK = VDD = 2.7 to 3.6V;
XN = HIGH, XX = HIGH
(provided for reference purposes Pj48M
only)
Period jitter for 36MHz output
(provided for reference purposes Pj36M
only)
Period jitter for 12MHz output
(provided for reference purposes Pj12M
only)
100
for the S1T9800 B .
*** *
VBK = VDD = 2.7 to 3.6V;
XN = LOW, XX = HIGH
150
150
200
ps
ps
ps
for the S1T9800 B .
*** *
VBK = VDD = 2.7 to 3.6V;
XN = HIGH, XX = LOW
for the S1T9800 B .
*** *
Period jitter for 9MHz output
(provided for reference purposes
only)
VBK = VDD = 2.7 to 3.6V;
Pj9M
XN = LOW, XX = LOW for
the S1T9800 B .
*** *
Note 2: The period jitters are provided for reference purposes only. Precise measurement of these values
should depend on the technique or instruments used. For details, see Section 8, Period Jitters.
Rev.1.0
EPSON
11
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
7.3.4 Clock characteristic of PLL oscillator section output (OUT)
(Unless otherwise specified, VSS = 0V, VBK = VDD = 2.7 to 3.6V, Ta = -40 to +85°C)
Parameter
Symbol
tr2
Condition
Min.
Typ.
Max.
Unit
Output rise time
Output fall time
DUTY
Time to start oscillation 1
(Note 2)
20% → 80%
5
5
ns
tf2
80% → 20%
ns
tw / t2
Tstap1
VTH = VDD/2
40
50
60
Tsta1+
0.01
%
VBK = VDD = 0
s
→ 2.7 to 3.6V
VBK = 2.7 to 3.6V,
VDD = 0V → VBK, or VBK
= VDD = 2.7 to 3.6V,
PWDX = LOW → HIGH
PWDX = HIGH → LOW
Time to start oscillation 2
(Note 2)
Tstap2
Tstp
0.01
100
s
Time to stop oscillation
ns
Note 3: The above Tstap1 and Tstap2 (time to start oscillation) define the time the PLL oscillation output falls
within fp11±1%.
12
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
• Clock characteristics of crystal oscillator section output (OUT32K)
OUT32K
T1
TW
tr1
tf1
T
W
tw / t1 =
T
1
PWDX32
or
VBK
Tsta1
Stabilization period
OUT32K
• Clock characteristic of PLL oscillator section output (OUT)
OUT
T
2
T
W2
tr2
tf2
T
W2
tw / t2 =
T
2
VBK &
VDD
or
PWDX32
Tsta1
Stabilization period
OUT32K
OUT
Tstap1
Stabilization period
Tstap2=Tsta1+Tstap1
VDD
or
PWDX
Tstap2
Stabilization period
OUT
Rev.1.0
EPSON
13
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
8. PERIOD JITTERS
The standard value for period jitter Pj is the difference between the maximum and minimum of the period in any
10,000 cycles.
T
1
T
2
T
3
T
9999
T10000
Pj=Tmax-Tmin
Tmax=Max.(Tn),n=1 to 10000
Tmin=Min.(Tn),n=1 to 10000
Package: SOP3A-8 (S1F98B00M10B1) is used.
Locate 0.1µF ceramic capacitors (used as bypass capacitors) as close as possible to the package to place them
between VDD and VSS, VDD2 and VSS, and VBK and VSS and measure the jitter.
Instruments: Use the standard instruments provided by Seiko Epson.
9. EXTERNAL CONNECTION EXAMPLES
9.1 Reference External Connection Example 1
Short VBK and VDD.
Recommended crystal oscillator: Seiko Epson C-004SH (R1 = 50kΩ Max.)
OUT
C
C
1
=C
2
=0.1µF
VDD
3=C
4=1nF
C
1
C3
TSEN SNX
TS[0]
VDD
OUT
PWDX
XN
XX
TS[3]
TS[2]
TS[1]
VC
VREG
VSS
VBK
PWDX32 OUT32K
XG
XD
C2
C4
OUT32K
14
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
9.2 Reference External Connection Example 2
Separate VBK and VDD.
Note that VBK should be kept equal to VDD when PLL is running.
Recommended crystal oscillator: Seiko Epson C-004SH (R1 = 50kΩ Max.)
OUT
C
C
1
=C
2
=0.1
µ
F
V
DD
3=C
4
=1nF
C
1
C3
V
BK
TSEN SNX
TS[0]
VDD
OUT
PWDX
XN
XX
TS[3]
TS[2]
TS[1]
VC
VREG
V
SS
BK
V
PWDX32 OUT32K
XG
XD
C
2
C
4
OUT32K
Rev.1.0
EPSON
15
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
9.3 Implementation Guidelines
1) VSS should be connected to the ground plane of PCB.
2) The VBK should be kept equal to VDD when PLL is running.
3) C1 to C4 are ceramic bypass capacitors. C1 and C2 must have a value of 0.1µF and C3 and C4 = 1nF. It
is important to place them as close to the + power supply pins, VDD and VBK, as possible and connect the
other ends to a ground plane on the PCB. Make the length of wiring as short as possible so that the area
of loop between each positive power supply and ground is minimized.
Applying excessive level of extraneous noise to power source or input terminal may cause latch up or
spurious phenomenon, which results in malfunction and breakdown.
4) The crystal oscillators must be placed as close to XG and XD pins as possible.
5) Avoid routing signal and/or power supply lines near the oscillator circuit (particularly crystal oscillator).
6) The insulation resistance between XG and XD pins and PCB should be as high as possible (200MΩ or
more).
7) Avoid condensation, which should cause the crystal oscillator to stop.
8) Avoid setting up any input pin potential to middle, which results in increased power consumption, reduced
noise margin, damaged elements, etc. It is recommended that the potential of any input pin be set up as
close to the VDD or VSS potential as possible.
Since any input pin has a very high impedance, avoid leaving them open to prevent malfunction caused by
potential inaccuracies or noise. It is required to use pullup or pulldown resistors on any unused input pins.
Each of the test pins (VREG, TST0 to TST3, SNX, TSEN, and VC) has a pulldown resistor. Leave them
floating.
9) Static electricity
Although an anti-static-electricity protection circuit is provided in the circuit, excessive levels of static
electricity may damage the IC. Choose conductive materials for packing and container. Use a soldering
gun and a measuring circuit free from high-voltage leak and provide grounding connection when working
with them.
16
EPSON
Rev.1.0
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
10. PACKAGE OUTLINE DIMENSIONS
10.1 SOP3A-16
[Note] These dimensions are subject to change without notice.
Reference
Plastic SOP 16pin (225mil) (SOP3A)
D
D1
16
9
INDEX
θ
1
8
θ2
R1
R
C
e
b
L2
L
L1
θ3
Lead type STD (SOP3A-16pin STD)
Dimension in Millimeters
Symbol
Dimension in Inches *
Min.
Nom.
Max.
Min.
Nom.
Max.
E
4.2
4.4
4.6
(0.166)
(0.173)
(0.181)
D1
A
1.7
(0.066)
A1
0.05
1.5
1.27
0.4
0.15
(0.002)
(0.059)
(0.050)
(0.016)
(0.006)
A2
e
b
0.3
0.5
(0.012)
(0.019)
C
θ
0
0.3
10
0.7
(0)
(0.012)
(10)
(0.027)
L
0.5
0.9
(0.020)
(0.035)
L1
L2
HE
5.9
10
6.2
10.2
6.5
10.4
(0.233)
(0.394)
(0.244)
(0.402)
(0.255)
(0.409)
D
θ2
θ3
R
R1
* for reference
Rev.1.0
EPSON
17
S1T98B00
B/S1T98B00
D Series Technical Manual
***
***
10.2 SSOP2-16
[Note] These dimensions are subject to change without notice.
Reference
Pin No.
Pin Name
VSS
Pin No.
9
Pin Name
1
2
3
4
5
6
7
8
VBK
10
D
11
D1
OUT32K
XG
12
OUT
VDD
PWDX
13
16
9
XD
14
15
16
INDEX
θ
1
8
θ2
R1
R
C
e
b
L2
L
L1
θ3
Lead type STD (SSOP2-16pin STD)
Dimension in Millimeters
Symbol
Dimension in Inches *
Min.
4.2
Nom.
4.4
Max.
4.6
Min.
Nom.
(0.173)
(0.260)
Max.
E
(0.166)
(0.252)
(0.181)
(0.267)
(0.066)
D1
6.4
6.6
6.8
A
1.7
A1
0.05
1.5
0.8
0.36
0.15
(0.002)
(0.059)
(0.031)
(0.014)
(0.006)
A2
1.4
1.6
(0.056)
(0.062)
e
b
0.26
0.1
0°
0.46
0.25
10°
(0.011)
(0.004)
(0°)
(0.018)
(0.009)
(10°)
C
θ
L
0.3
0.5
0.9
0.4
6.2
0.7
(0.012)
(0.020)
(0.035)
(0.016)
(0.244)
(0.027)
L1
L2
HE
5.9
6.5
7
(0.233)
(0.255)
(0.275)
D
θ2
θ3
R
R1
* for reference
18
EPSON
Rev.1.0
International Sales Operations
AMERICA
ASIA
EPSON ELECTRONICS AMERICA, INC.
EPSON (CHINA) CO., LTD.
HEADQUARTERS
150 River Oaks Parkway
23F, Beijing Silver Tower 2# North RD DongSanHuan
ChaoYang District, Beijing, CHINA
San Jose, CA 95134, U.S.A.
Phone: +1-408-922-0200
Phone: 64106655
FAX: 64107319
FAX: +1-408-922-0238
SHANGHAI BRANCH
SALES OFFICES
West
7F, High-Tech Bldg., 900, Yishan Road,
Shanghai 200233, CHINA
1960 E.Grand Avenue
El Segundo, CA 90245, U.S.A.
Phone: +1-310-955-5300
Phone: 86-21-5423-5577
FAX: 86-21-5423-4677
FAX: +1-310-955-5400
FAX: +1-815-455-7633
FAX: +1-781-246-5443
EPSON HONG KONG LTD.
20/F., Harbour Centre, 25 Harbour Road
Wanchai, Hong Kong
Phone: +852-2585-4600
Telex: 65542 EPSCO HX
Central
101 Virginia Street, Suite 290
Crystal Lake, IL 60014, U.S.A.
Phone: +1-815-455-7630
FAX: +852-2827-4346
EPSON TAIWAN TECHNOLOGY & TRADING LTD.
14F, No. 7, Song Ren Road,
Taipei 110
Northeast
301 Edgewater Place, Suite 120
Wakefield, MA 01880, U.S.A.
Phone: +1-781-246-3600
Phone: 02-8786-6688
FAX: 02-8786-6660
HSINCHU OFFICE
Southeast
3010 Royal Blvd. South, Suite 170
Alpharetta, GA 30005, U.S.A.
13F-3, No. 295, Kuang-Fu Road, Sec. 2
HsinChu 300
Phone: 03-573-9900
FAX: 03-573-9169
Phone: +1-877-EEA-0020
FAX: +1-770-777-2637
EPSON SINGAPORE PTE., LTD.
No. 1 Temasek Avenue, #36-00
Millenia Tower, SINGAPORE 039192
EUROPE
EPSON EUROPE ELECTRONICS GmbH
HEADQUARTERS
Phone: +65-6337-7911
FAX: +65-6334-2716
Riesstrasse 15
80992 Munich, GERMANY
Phone: +49-(0)89-14005-0
SEIKO EPSON CORPORATION
KOREA OFFICE
50F, KLI 63 Bldg., 60 Yoido-dong
Youngdeungpo-Ku, Seoul, 150-763, KOREA
FAX: +49-(0)89-14005-110
DÜSSELDORF BRANCH OFFICE
Altstadtstrasse 176
Phone: 02-784-6027
FAX: 02-767-3677
51379 Leverkusen, GERMANY
Phone: +49-(0)2171-5045-0
GUMI OFFICE
6F, Good Morning Securities Bldg., 56 Songjeong-Dong,
Gumi-City, Seoul, 730-090, KOREA
Phone: 054-454-6027
- JAPAN -
SEIKO EPSON CORPORATION
FAX: +49-(0)2171-5045-10
UK & IRELAND BRANCH OFFICE
Unit 2.4, Doncastle House, Doncastle Road
Bracknell, Berkshire RG12 8PE, ENGLAND
FAX: 054-454-6093
Phone: +44-(0)1344-381700
FAX: +44-(0)1344-381701
ELECTRONIC DEVICES MARKETING DIVISION
FRENCH BRANCH OFFICE
1 Avenue de l’ Atlantique, LP 915 Les Conquerants
Z.A. de Courtaboeuf 2, F-91976 Les Ulis Cedex, FRANCE
IC Marketing Department
IC Marketing & Engineering Group
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: +81-(0)42-587-5816
Phone: +33-(0)1-64862350
FAX: +33-(0)1-64862355
FAX: +81-(0)42-587-5624
BARCELONA BRANCH OFFICE
Barcelona Design Center
Edificio Testa, Avda. Alcalde Barrils num. 64-68
E-08190 Sant Cugat del Vallès, SPAIN
ED International Marketing Department
421-8, Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: +81-(0)42-587-5814
FAX: +81-(0)42-587-5117
Phone: +34-93-544-2490
FAX: +34-93-544-2491
Scotland Design Center
Integration House, The Alba Campus
Livingston West Lothian, EH54 7EG, SCOTLAND
Phone: +44-1506-605040
FAX: +44-1506-605041
S1T98B00 B/S1T98B00
***
Technical Manual
D Series
***
SEIKO EPSON CORPORATION
ELECTRONIC DEVICES MARKETING DIVISION
EPSON Electronic Devices Website
http://www.epsondevice.com/
First issue July, 2003
H
Printed in Japan
A
相关型号:
©2020 ICPDF网 联系我们和版权申明