IPS1-1-10-1L-D-VS [SEMTECH]
20 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT;
| 型号： | IPS1-1-10-1L-D-VS |
| 厂家： | 
SEMTECH CORPORATION |
| 描述： | 20 CONTACT(S), FEMALE, STRAIGHT TWO PART BOARD CONNECTOR, SURFACE MOUNT |
| 文件： | 总2页 (文件大小：203K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
REVISION S
C5
IPS1-1XX-XX-XX-D-VS-XX-XXX
No OF POS PER ROW
-02 THRU -25
((No OF POS x .1000 [2.540])
+ .0150 [.381]) .010 [.25]
OPTION
.058 1.46 REF
DO NOT
SCALE FROM
THIS PRINT
-POL: POSITION #1 REMOVED
((No OF POS -1) x
.1000[ 2.540]) .004[.10]
(USE IPS1-XX-D-P)
-FL: FRICTION LOCK
LEAD STYLE
(USE IPS1-XX-D-FL-X)
[POSITIONS -05 THRU -25]
-01
02
PLATING SPECIFICATION
OPTION
-S: SELECTIVE GOLD, MATTE TIN TAIL
-K: POLYIMIDE FILM PAD [4 POS MIN]
(USE C-17-02-S)
.195 4.95
REF
.100 2.54 REF
(USE K-500-300)
-SM: SELECTIVE GOLD, MATTE TIN TAIL
(USE C-17-02-S)
-LC: LOCKING CLIP (USE LC-07-TM)
(SEE NOTE 10)
-L: LIGHT SELECTIVE GOLD, MATTE TIN TAIL
(USE C-17-02-L)
-TR: TAPE & REEL PACKAGING
01
ROW SPECIFICATION
-D: DOUBLE (USE IPS1-XX-D)
TAIL OPTION
-VS: VERTICAL SURFACE MOUNT
2
MAX SWAY
C-17-02-XX
"A"
.031 0.79 x .016[.41] REF
IPS1-XX-D
(TYP)
C2
+3°
-2°
.150 3.81 REF
90°
.335 8.51
REF
C1
SEE TABLE 1
.020 0.51 REF
.050±.010 1.27±0.25
"A"
.310 7.87
(SEE NOTE 6 & 7)
2
MAX SWAY
(TYP)
SECTION "A"-"A"
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE CUT FLASH: .010[.25].
3. MINIMUM CONTACT PUSH OUT FORCE: 1.5 lbs.
PACKAGING VIEW
4. MAXIMUM ALLOWABLE BOW: .003[.08] INCH/INCH AFTER ASSEMBLY.
5. MAXIMUM VARIATION BETWEEN PIN ROWS: .010[.25].
6. SHEAR TAILS TO ACHIEVE DIMENSION SHOWN.
7. SHEAR BURR ALLOWED ON TOP SIDE (MOLD SIDE) TO .005[.13] MAX.
8. "END WALLS" AFTER CUTTING SHOULD BE .015+/-.003[.38+/-.08].
9: AFTER REVISION N OF COMPONENT IPS1-XX-D-XX-X, SAMTEC LOGO TO APPEAR ON #1 POSITION.
10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS NOT COMPATIBLE
WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT FOR ALL ASSEMBLIES
WITH THE -LC OPTION.
INPROCESS
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
TOLERANCES ARE:
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DECIMALS
ANGLES
2
.XX: .01[.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005[.13]
.XXXX: .0020[.051]
C3
SHEET SCALE: 2.5:1
MATERIAL:
DO NOT SCALE DRAWING
.190±.005 4.83±0.13
.100 DOUBLE ROW SHROUDED SOCKET ASSEMBLY
INSULATOR: VECTRA E130i, COLOR: BLACK
CONTACT: PHOS BRONZE, 510 SPRING TEMPER
NO.
DWG.IPS1-1XX-XX-XX-D-VS-XX-XXX
TUBE: ASP-90528-01-S
PLUG: TP-03
BY:
DEAN P
10-30-2002 SHEET 1 OF 2
C:\EnterpriseVault\DWG\MISC\MKTG\IPS1-1XX-XX-XX-D-VS-XX-XXX-MKT.SLDDRW
REVISION S
-FL: FRICTION LOCK OPTION
IPS1-110-01-X-D-VS-FL SHOWN
IPS1-XX-D-FL-X
-K: POLYAMIDE FILM PAD OPTION
"R" REF (SEE NOTE)
-POL: POLARIZED OPTION
IPS1-110-01-X-D-VS-POL SHOWN
C4
"S" (SEE NOTE)
.011±.010 0.28±0.25
04 02
01
03
IPS1-XX-D-P
.390 9.91
.2165±.0050 5.499±0.127
NOTE: "R" = USE MEASURED DIMENSION
"S" = (("R" - .2165[5.499] / 2) .020[.51]
-LC: LOCKING CLIP OPTION
IPS1-110-01-X-D-VS-LC-FL SHOWN
.055 1.40
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
LC-07-TM
((No OF POS -2) x .100[2.54])
.003[.08]
.056 1.42 REF
DESCRIPTION:
DO NOT SCALE DRAWING
SHEET SCALE: 2.5:1
.100 DOUBLE ROW SHROUDED SOCKET ASSEMBLY
NO.
DWGI.PS1-1XX-XX-XX-D-VS-XX-XXX
C:\EnterpriseVault\DWG\MISC\MKTG\IPS1-1XX-XX-XX-D-VS-XX-XXX-MKT.SLDDRW
BY:
DEAN P
10-30-2002 SHEET 2 OF 2
相关型号：
©2020 ICPDF网 联系我们和版权申明