SC1540ACS-3.3-.TR [SEMTECH]
3.3V FIXED POSITIVE LDO REGULATOR, 1.3V DROPOUT, PDSO8, SO-8;型号: | SC1540ACS-3.3-.TR |
厂家: | SEMTECH CORPORATION |
描述: | 3.3V FIXED POSITIVE LDO REGULATOR, 1.3V DROPOUT, PDSO8, SO-8 光电二极管 输出元件 调节器 |
文件: | 总4页 (文件大小:64K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
300mA AND 500mA LOW DROPOUT
VOLTAGE REGULATORS WITH ENABLE
SC1540
SC1540A
PRELIMINARY - May 1, 2000
TEL:805-498-2111 FAX:805-498-3804 WEB:http://www.semtech.com
DESCRIPTION
FEATURES
The SC1540 and SC1540A are high performance low
dropout positive voltage regulators designed for use in
applications where power management is critical, such
as battery powered systems. Additionally, the
SC1540(A) provides excellent regulation over varia-
tions in line, load and temperature. Outstanding fea-
tures include low dropout performance at rated current,
fast transient response, internal current limiting and
thermal shutdown protection of the output device. A
very low quiescent current of 10µA in shutdown mode
reduces power dissipation. With three voltage options
available, the SC1540(A) comes in the popular SO-8
surface mount package.
•= Low dropout performance, 1.3V max
•= Full current rating over line and temperature
•= Fast transient response
•= +2% total output regulation over line, load and
temperature
•= 10µA max. quiescent current in shutdown
•= Three fixed output voltages
•= Line regulation 0.2% max.
•= Load regulation 0.4% max.
•= SO-8 package
ORDERING INFORMATION
DEVICE(1)(2)
SC1540CS-X.X
SC1540ACS-X.X
Notes:
OUTPUT CURRENT PACKAGE
300mA
500mA
SO-8
SO-8
APPLICATIONS
•= Active SCSI termination
•= Low voltage microcontrollers
•= Switching power supply post-regulator
(1) Where X.X denotes voltage options. Available voltages
are: 1.8V, 2.5V and 3.3V. Contact factory for additional
voltage options.
(2) Only available in tape and reel packaging (suffix ‘.TR’)
e.g. SC1540CS-X.X-.TR.
BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Parameter
Symbol Maximum Units
Maximum Input Pin
Voltage
VIN, EN
PD
7
V
Power Dissipation
Internally
Limited
W
Thermal Resistance
Junction to Case
SO-8
47
°C/W
θJC
Thermal Resistance
Junction to Ambient
SO-8(1)
65
°C/W
°C
θJA
PIN CONFIGURATIONS
Operating Junction
Temperature Range
TJ
0 to 125
Top View
Storage Temperature
Range
TSTG
-65 to 150
260
°C
°C
Lead Temperature
(Soldering) 10 Sec
TLEAD
Notes:
(1) 2 inch square of 1/16” FR-4, double sided, 1 oz.
minimum copper weight.
SO-8
1
© 2000 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
300mA AND 500mA LOW DROPOUT
VOLTAGE REGULATORS WITH ENABLE
SC1540
SC1540A
PRELIMINARY - May 1, 2000
ELECTRICAL CHARACTERISTICS
Unless otherwise specified: IO = 0mA to 300mA (500mA for SC1540A), EN = VIN
1.5V Option: VIN = 2.9V to 7.0V
2.5 Option: VIN = 3.9V to 7.0V
3.3V Option: VIN = 4.7V to 7.0V
Values in bold apply over full operating temperature range.
Test Conditions
Test Limits
Typ
Parameter
Symbol
Min
Max
Units
Output Voltage (1)
VO
VIN = 5V, IO = 0mA
0.99|VO|
0.98|VO|
VO
1.01|VO|
1.02|VO|
0.2
V
VO
Line Regulation(1)
Load Regulation(1)
REG(LINE)
REG(LOAD)
IO = 10mA
VIN = 5V
%
%
0.035
0.2
0.4
Dropout Voltage(1)(2)
SC1540
SC1540A
VD
IO = 300mA
IO = 500mA
V
1.10
1.30
Current Limit(1)
SC1540
SC1540A
ICL
IQ
mA
mA
330
550
Quiescent Current
VIN = 5V, EN = VIN
5
6
7
10
8
VIN = 5V, EN < 0.25V
µA
V
10
Enable Pin Control Voltage
Enable Pin Current
EN
IEN
Device OFF
Device ON
0.25
0.45
(VO+0.5) (VO+0.8)
EN = 0V, VIN = 5V (OFF)
EN = VIN = 5V (ON)
0.1
15
µA
1.0
25
Temperature Coefficient
Temperature Stability
RMS Output Noise(3)
TC
TS
VN
RA
%/°C
%
0.005
0.5
0.003
72
%VO
dB
Ripple Rejection Ratio(4)
VIN = 5V
60
NOTES:
(1) Low duty cycle pulse testing with Kelvin connections required.
(2) ∆VOUT, ∆ VREF = 1%
(3) Bandwidth of 10 Hz to 10kHz.
(4) 120Hz input ripple.
2
© 2000 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
300mA AND 500mA LOW DROPOUT
VOLTAGE REGULATORS WITH ENABLE
SC1540
SC1540A
PRELIMINARY - May 1, 2000
TYPICAL APPLICATION
U1
VIN
SC1540(A)
VO
VIN
VOUT
ENABLE SIGNAL
EN
GND
C1
C2
10uF
Tantalum
10uF min.
Tantalum
NOTES
(1) Input and output capacitors should be located close to the device.
(2) Connect all pins to PCB for optimal thermal characteristics.
(3) Increasing the output capacitor value will improve the overall transient response.
(4) The device is enabled when EN = VIN, and shut down when EN is pulled to ground. EN should not be taken
higher than VIN. A CMOS signal referenced to VIN would be ideal for switching the SC1540(A) on and off.
3
© 2000 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
300mA AND 500mA LOW DROPOUT
VOLTAGE REGULATORS WITH ENABLE
SC1540
SC1540A
PRELIMINARY - May 1, 2000
OUTLINE DRAWING - SO-8
JEDEC
REF: MS-012AA
LAND PATTERN - SO-8(1)
Note:
(1) More copper area should be used to lower RTH(J-A) as needed.
ECN00-1038
4
© 2000 SEMTECH CORP.
652 MITCHELL ROAD NEWBURY PARK CA 91320
相关型号:
SC1541CM-1.8.TR
Fixed Positive LDO Regulator, 1.8V, 1.3V Dropout, BIPolar, PSSO5, TO-263, 5 PIN
SEMTECH
SC1541CM-2.5.TR
Fixed Positive LDO Regulator, 2.5V, 1.3V Dropout, BIPolar, PSSO5, TO-263, 5 PIN
SEMTECH
©2020 ICPDF网 联系我们和版权申明