SK10LVE111EPJT [SEMTECH]
Low Skew Clock Driver, 10LVE Series, 9 True Output(s), 0 Inverted Output(s), ECL, PQCC28, PLASTIC, LCC-28;型号: | SK10LVE111EPJT |
厂家: | SEMTECH CORPORATION |
描述: | Low Skew Clock Driver, 10LVE Series, 9 True Output(s), 0 Inverted Output(s), ECL, PQCC28, PLASTIC, LCC-28 驱动 逻辑集成电路 |
文件: | 总6页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SK10/100LVE111E
1:9 Differential LVECL/LVPECL
Clock Driver w/Enable Input
HIGH-PERFORMANCE PRODUCTS
Description
the device. The VBB output pin should be used only as a
DC bias for the LVE111 as its current sink/
sourcecapability is limited. Whenever used, the VBB pin
should be bypassed to VCC via a 0.01 µF capacitor.
The SK10/100LVE111E is a low skew 1-to-9 differential
driver designed with clock distribution in mind. The SK10/
100LVE111E’s function and performance are similar to
the SK100E111, with the added feature of low voltage
operation and the enable input. It accepts one signal
input which can be either differential or single-ended if
Features
the V
output is used. The signal is fanned out to 9
BB
• 200 ps Part-to-Part Skew
• 50 ps Output-to-Output Skew
• Differential Design
identical differential outputs. An enable input is also
provided. A PECL High logic level disables the device by
forcing all Q outputs Low and all Q* outputs High.
• V Output
BB
• Enable Input
• Voltage and Temperature Compensated Outputs
• Low Voltage V Range of –3.0V to –3.8V
• 75KW Internal Input Pulldown Resistors
• Fully Compatible with MC100LVE111
• Specified Over Industrial Temperature Range:
–40oC to +85oC
The device is specifically designed, modeled, and produced
with low skew as the key goal. Optimal design and layout
serve to minimize gate-to-gate skew within a device, and
characterization is used to determine process control limits
that ensure consistent tpd distributions from lot to lot.
The net result is a dependable, guaranteed low skew
device.
EE
• ESD Protection of >4000V
• Available in 28 Pin PLCC Package
To ensure that the tight skew specification is met, it is
necessary that both sides of the differential output are
terminated into 50W, even if only one side is being used.
In most applications, all nine differential pairs will be used
and therefore terminated. In the case where fewer than
nine pairs are used, it is necessary to terminate at least
the output pairs on the same package side as the pair(s)
being used on that side in order to maintain minimum
skew. Failure to do so will result in small degradations of
propagation delay (on the order of 10–20ps) of the
output(s) being used which, while not being catastrophic
to most designs, will mean a loss of skew margin.
Functional Block Diagram
Q0
Q0*
Q1
Q1*
Q2
Q2*
The SK10/100LVE111E,as with most other ECL devices,
can be operated from a positive VCC supply in PECL mode.
This allows the LVE111E to be used for high performance
clock distribution in +3.3V systems. Designers can take
advantage of the LVE111E’s performance to distribute low
skew clocks across the back plane or the board. In a
PECL environment, series or Thevenin line terminations
are typically used as they require no additional power
supplies. For systems incorporating GTL, parallel
termination offers the lowest power by taking advantage
of the 1.2V supply as a terminating voltage.
Q3
Q3*
Q4
Q4*
IN
IN*
Q5
Q5*
EN*
Q6
Q6*
Q7
Q7*
The SK10/100LVE111 provides VBB output for either
single-ended use or as a DC bias for AC coupling to
Q8
V
BB
Q8*
Revision 1/August 27, 2001
www.semtech.com
1
SK10/100LVE111E
HIGH-PERFORMANCE PRODUCTS
PIN Description
Pin Names
Pin
Function
IN, IN*
Differential Input Pair
Enable
EN*
Q0, Q0* - Q8, Q8*
Differential Outputs
VBB
VBB Output
VCC, VCCO
VEE
Positive Supply
Negative Supply
Pinout
25
24
23
22
21
20
19
VEE
EN*
IN
26
27
28
18
17
16
15
14
13
12
Q3
Q3*
Q4
28 Lead PLCC
VCC
IN*
1
2
3
4
VCC0
Q4*
Q5
(Top View)
VBB
N/C
Q5*
5
6
7
8
9
10
11
Revision 1/August 27, 2001
www.semtech.com
2
SK10/100LVE111E
HIGH-PERFORMANCE PRODUCTS
Package Information
28 Pin PLCC Package
Y BRK
–N–
S
N
S
S
M
B
0.007 (0.180)
T
L - M
D
U
M
S
N
0.007 (0.180)
+
T
L - M
PIN Descriptions
–L–
– M –
Z
D
W
+
S
0.010 (0.250) T L - M
S
N
S
G1
V
X
28
1
S
S
N
0.007(0.180)
M
T
L – M
S
N
S
A
R
0.007 (0.180) M T L – M
H
Z
S
S
N
0.007 (0.180)
M
T
L – M
C
K1
View S
E
0.004 (0.100)
–T– SEATING PLANE
G
J
K
G1
VIEW S
S
S
S
N
0.010 (0.250)
T
L – M
S
0.007 (0.180)
M
T L – M
N
S
F
NOTES:
INCHES
MILLIMETERS
1. Datums -L-, -M-, and -N- determined where top of lead
shoulder exits plastic body at mold parting line.
2. DIM G1, true position to be measured at Datum -T-,
Seating Plane.
3. DIM R and U do not include mold flash. Allowable mold flash
is 0.010 (0.250) per side.
DIM
A
MIN
MAX
0.495
0.495
0.180
0.110
0.019
MIN
12.32
12.32
4.20
MAX
12.57
12.57
4.57
0.485
0.485
0.165
0.090
0.013
B
C
E
2.29
2.79
F
0.33
0.48
4. Dimensioning and tolerancing per ANSI Y14.5M, 1982.
5. Controlling Dimension: Inch.
6. The package top may be smaller than the package bottom by
G
H
J
0.050 BSC
1.27 BSC
0.026
0.020
0.025
0.450
0.450
0.042
0.042
0.042
--
0.032
0.66
0.51
0.64
11.43
11.43
1.07
1.07
1.07
--
0.81
--
--
up to 0.012 (0.300). Dimensions R and U are determined at
the outermost extremes of the plastic body exclusive of mold
flash, tie bar burrs, gate burrs and interlead flash, but
including any mismatch between the top and bottom of the
plastic body.
K
--
--
R
0.456
0.456
0.048
0.048
0.056
0.020
10o
11.58
11.58
1.21
1.21
1.42
0.50
10o
U
V
W
X
7. Dimension H does not include Dambar protrusion or
intrusion. The Dambar protrusion(s) shall not cause the H
dimension to be greater than 0.037 (0.940). The Dambar
intrusion(s) shall not cause the H dimension to be smaller
than 0.025 (0.635).
Y
Z
2o
2o
G1
K1
0.410
0.040
0.430
--
10.42
1.02
10.92
--
3
www.semtech.com
Revision 1/August 27, 2001
SK10/100LVE111E
HIGH-PERFORMANCE PRODUCTS
DC Characteristics
SK10LVE111E LVPECL DC Electrical Characteristics (Note 1, 9)
(V – V
CC
= 3.0V to 3.8V; VOUT Loaded 50W to V – 2.0V)
EE
CC
o
o
o
o
TA = - 40 C
TA = 0 C
TA = + 25 C
TA = + 85 C
Symbol
Characteristic
Min
Typ
Max
2410
1650
2410
1800
2.00
Min
Typ
Max
2460
1670
2460
1820
2.03
Min
Typ
Max
2490
1670
2490
1820
2.05
Min
Typ
Max
2580
1705
2580
1855
2.11
Unit
mV
mV
mV
mV
V
3
V
V
V
V
V
Output HIGH Voltage
2220
1350
2070
1350
2280
1350
2130
1350
2320
1350
2170
1350
2390
1350
2240
1350
OH
OL
IH
IL
3
Output LOW Voltage
3
Input HIGH Voltage
3
Input LOW Voltage
3
Output Reference Voltage
1.87
-150
1.92
-150
1.95
-150
1.99
-150
BB
Input Current (Diff)
(SE)
150
150
150
150
150
150
150
150
µA
µA
I
IN
I
Power Supply Current
49
66
49
66
49
66
49
66
mA
EE
SK100LVE111E LVPECL DC Electrical Characteristics (Note 2)
(V – V
CC
= 3.0V to 3.8V; VOUT Loaded 50W to V – 2.0V)
CC
EE
o
o
o
o
TA = - 40 C
TA = 0 C
TA = 25 C
TA = 85 C
Symbol
Characteristic
Min
Typ
Max
2420
1605
2420
1825
2.04
3.8
Min
Typ
Max
2420
1680
2420
1825
2.04
3.8
Min
Typ
Max
2420
1680
2420
1825
2.04
3.8
Min
Typ
Max
2420
1680
2420
1825
2.04
3.8
Unit
mV
mV
mV
mV
V
3
V
V
V
V
V
V
Output HIGH Voltage
2215
1470
2135
1490
1.92
2345
1595
2275
1490
2135
1490
1.92
2345
1595
2275
1490
2135
1490
1.92
2345
1595
2275
1490
2135
1490
1.92
2345
1595
OH
OL
IH
3
Output LOW Voltage
3
Input HIGH Voltage
3
Input LOW Voltage
IL
3
Output Reference Voltage
Power Supply Voltage
BB
CC
3.0
3.0
3.0
3.0
V
Input Current (Diff)
(SE)
-150
150
150
-150
150
150
-150
150
150
-150
150
150
µA
µA
I
IN
I
Power Supply Current
57
78
57
78
57
78
57
78
mA
EE
Revision 1/August 27, 2001
www.semtech.com
4
SK10/100LVE111E
HIGH-PERFORMANCE PRODUCTS
AC Characteristics
SK10/100LVE111E AC Electrical Characteristics
(V – V
CC
= 3.0V to 3.8V; VOUT Loaded 50W to V – 2.0V)
EE
CC
o
o
o
o
TA = - 40 C
TA = 0 C
TA = + 25 C
TA = + 85 C
Symbol
Characteristic
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Min
Typ
Max
Unit
4,
Propagation Delay to Output
5
t
PLH
t
PHL
IN (Differential)
IN (Single-Ended)
455
490
530
560
640
680
465
510
550
600
665
685
490
520
560
610
665
690
520
540
590
630
660
720
ps
ps
t
Within-Device Skew
Part-to-Part Skew (Diff)
50
200
50
200
50
200
50
200
ps
ps
skew
6
7
V
V
Minimum Input Swing
500
1000
500
1000
500
1000
500
1000
mV
V
PP
VEE +
1.5
VCC – VEE +
0.4
VCC – VEE +
0.4
VCC – VEE +
0.4
VCC –
0.4
8
Common Mode Range
CMR
1.5
1.5
1.5
Rise/Fall Time
20% to 80%
t , t
180
270
590
200
300
595
210
310
560
220
330
470
ps
r
f
1. 10LVE111E circuits are designed to meet the DC specifications shown in the table after thermal
equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and
transverse airflow greater than 500 lfpm is maintained.
2. 100LVE111E circuits are designed to meet the DC specifications shown in the table where transverse
airflow greater than 500 lfpm is maintained.
3. These values are for VCC = 3.3V. Level Specifications will vary 1:1 with VCC.
4. The differential propagation delay is defined as the delay from the crossing points of the differential input
signals to the crossing point of the differential output signals.
5. The single-ended propagation delay is defined as the delay from the 50% point of the input signal to the
50% point of the output signal.
6. The within-device skew is defined as the worst case difference between any two similar delay paths within a
single device.
7. V (min) is defined as the minimum input differential voltage which will cause no increase in the
PP
propagation delay. The V (min) is AC limited for the LVE111E as a differential input as low as 500
PP
mV will still produce full ECL levels at the output.
8. CMR range is referenced to the most positive side of the differential input signal. Normal operation is
obtained if the high level falls within the specified range and the peak-to-peak voltage lies between
VPP
and 1V. The lower end of the CMR range varies 1:1 with VEE and is equal to VEE + 1.5V.
(min)
9. For part ordering description, see HPP Part Ordering Information Data Sheet.
5
www.semtech.com
Revision 1/August 27, 2001
SK10/100LVE111E
HIGH-PERFORMANCE PRODUCTS
Ordering Information
Ordering Code
SK10LVE111EPJ
SK10LVE111EPJT
SK100LVE111EPJ
SK100LVE111EPJT
Package ID
28-PLCC
28-PLCC
28-PLCC
28-PLCC
Temperature Range
Industrial
Industrial
Industrial
Industrial
Contact Information
Semtech Corporation
High-Performance Products Division
Division Headquarters
10021 Willow Creek Road
San Diego, CA 92131
Phone: (858) 695-1808
Marketing Group
1111 Comstock Street
Santa Clara, CA 95054
Phone: (408) 566-8776
FAX:
(858) 695-2633
FAX: (408) 727-8994
Revision 1/August 27, 2001
www.semtech.com
6
相关型号:
SK10LVEL58D
Multiplexer, 10LVEL Series, 1-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, PDSO8, 0.150 INCH, SOIC-8
SEMTECH
SK10LVEL58DT
Multiplexer, 10LVEL Series, 1-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, PDSO8, 0.150 INCH, SOIC-8
SEMTECH
SK10LVEL58U
Multiplexer, 10LVEL Series, 1-Func, 2 Line Input, 1 Line Output, Complementary Output, ECL, DIE
SEMTECH
©2020 ICPDF网 联系我们和版权申明