SD125SB100A [SENSITRON]
SILICON SCHOTTKY RECTIFIER DIE Ultra Low Reverse Leakage; 硅肖特基整流器DIE超低反向漏![SD125SB100A](http://pdffile.icpdf.com/pdf1/p00122/img/icpdf/SD125SB100A_670236_icpdf.jpg)
型号: | SD125SB100A |
厂家: | ![]() |
描述: | SILICON SCHOTTKY RECTIFIER DIE Ultra Low Reverse Leakage |
文件: | 总2页 (文件大小:191K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
SENSITRON
SEMICONDUCTOR
SD125SB100A/B/C
TECHNICAL DATA
DATA SHEET 240, REV A
SILICON SCHOTTKY RECTIFIER DIE
Ultra Low Reverse Leakage
Applications:
• Switching Power Supply • Converters • Free-Wheeling Diodes • Polarity Protection Diode
Features:
•
Ultra low Reverse Leakage Current
•
•
•
•
•
•
•
•
Soft Reverse Recovery at Low and High Temperature2
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Electrically / Mechanically Stable during and after packaging
Out Performs 100 Volt Ultrafast Rectifiers
Maximum Ratings:
Characteristics
Peak Inverse Voltage
Max. Average Forward
Current
Max. Peak One Cycle Non-
Repetitive Surge Current
Non-Repetitive Avalanche
Energy
Repetitive Avalanche
Current
Symbol
VRWM
IF(AV)
Condition
-
Max.
100
16
Units
V
A
50% duty cycle, rectangular
wave form
IFSM
EAS
IAR
10 ms, Sine pulse (1)
240
8.8
0.6
A
mJ
A
TJ = 25 °C, IAS = 0.6 A,
L = 30mH
AS decay linearly to 0 in 1 µs
ƒ limited by TJ max VA=1.5VR
I
Max. Junction Temperature
Max. Storage Temperature
TJ
Tstg
-
-
-55 to +175
-55 to +175
°C
°C
Electrical Characteristics:
Characteristics
Symbol
Condition
@ 16A, Pulse, TJ = 25 °C
@ 16A, Pulse, TJ = 125 °C
@VR = 100V, Pulse,
TJ = 25 °C
Max.
0.85
0.69
10
Units
V
V
Max. Forward Voltage Drop
VF1
VF2
IR1
Max. Reverse Current
µA
mA
pF
IR2
CT
@VR = 100V, Pulse,
TJ = 125 °C
1.0
Max. Junction Capacitance
(1) in SHD package
500
@VR = 5V, TC = 25 °C
fSIG = 1MHz,
ISIG = 50mV (p-p)
• 221 West Industry Court ꢀ Deer Park, NY 11729-4681 ꢀ (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SD125SB100A/B/C
SENSITRON
TECHNICAL DATA
DATA SHEET 240, REV A
Mechanical Outline
D
h
H
A
B
Figure 1
Figure 2
A
B
D
H
h
0.125±0.003
0.116±0.003
0.070±0.005
0.0155±0.001
0.010±0.002
Top side(Anode) metallization:
A = Al - 25 kÅ minimum, Figure 1
B = Ag - 30 kÅ minimum, Figure 1
C = Au - 12 kÅ min, Figure 2
Bottom side (Cathode) metallization:
A, B, C = Ti/Ni/Ag - 30 kÅ minimum.
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 West Industry Court ꢀ Deer Park, NY 11729-4681 ꢀ (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
相关型号:
©2020 ICPDF网 联系我们和版权申明