SL6360FRLS [SENSITRON]

Bridge Rectifier Diode, 3 Phase, 6A, Silicon,;


型号：	SL6360FRLS
厂家：	SENSITRON
描述：	Bridge Rectifier Diode, 3 Phase, 6A, Silicon, 整流二极管桥式整流二极管局域网
文件：	总2页 (文件大小：239K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SL6360FRL

SENSITRON

_____

SEMICONDUCTOR

TECHNICAL DATA

DATA SHEET 5338, REV -

THREE PHASE FULL WAVE

ULTRAFAST BRIDGE RECTIFIER ASSEMBLY

DESCRIPTION: 600 VOLT, 6 AMP, 180 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY.

Note: Add ‘S’ at the end for S-100 Screening

MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at T_A= 25^oC unless otherwise specified.

RATING

CONDITIONS

MIN

TYP

MAX

UNIT

Peak Inverse Voltage

(PIV)

600

Vdc

Average DC Output

Current (T_C= Case Temp)

T_C= 55^oC

T_C= 100^oC

Amps

4.5

(I_o)

Peak Single Cycle Surge

t_p= 8.3 ms Single

Half Cycle Sine

Wave,

Amps(pk)

Current (I_FSM

)

Superimposed On

Rated Load

Operating and Storage

Temp. (T_op& T_stg)

-55

+150

1.3

Maximum Forward

Voltage (V_f)

Volts

I_f= 3.0A (300 sec

pulse, duty cycle <

2%)

Amps

Maximum Instantaneous

Reverse Current At Rated

(PIV)

5.0

T_A= 25 C

100

T_A= 100 C

Reverse Recovery Time

(t_rr)

I_f= 0.5A, I_r= 1.0A, I_rr

= 0.25A

180

4.5

nsec

C/W

Thermal Resistance (

)

 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com

SL6360FRL

SENSITRON

TECHNICAL DATA

DATA SHEET 5338, REV -

MECHANICAL DIMENSIONS: In Inches / mm

1.14 (28.96

2-56 UNC 4 Places

Min 6 Full Threads

1.10 27.94)

.27 (6.86

.23 5.84)

1.01 (25.65

0.99 25.15)

.77 (19.56

.73 18.54)

.635 (16.13

.615 15.62)

–

AC AC AC

.100 (2.54)Max

.50 (12.7)Min

.18 (4.57

.14 3.56)

.20 (5.08

.16 4.06)

.043 (1.09

Dia.

AC AC AC

.037 .940)

–

FIG. 405A

Note: Case finish - Black Anodized

DISCLAIMER:

1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product

characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the

datasheet(s).

2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical

equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of

users’ fail-safe precautions or other arrangement .

3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of

the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any

other problems that may result from applications of information, products or circuits described in the datasheets.

4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at

a value exceeding the absolute maximum rating.

5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.

6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron

Semiconductor.

7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder

maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When

exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.

 Phone (631) 586 7600 Fax (631) 242 9798 www.sensitron.com sales@sensitron.com

相关型号：