914161052000 [SENSORTECHNICS]
10 mm switching soleniod valve; 10毫米切换soleniod阀型号: | 914161052000 |
厂家: | SENSORTECHNICS GMBH |
描述: | 10 mm switching soleniod valve |
文件: | 总4页 (文件大小:97K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ten-X®
10 mm switching soleniod valve
FEATURES
· 3-way, 2 position (NO, NC & Distributor)
· Optional ‘Hit and Hold’ drive electronics
using pulse width modulation (PWM)
at 25-32 kHz
· Minimum flow of 8 lpm @ 6 psi and
22 lpm @ 30 psi
· 10 mm single piece body design
· Barbed pressure ports allow for direct
tubing or manifold assemblies
· RoHS compliant
MEDIA COMPATIBILITY
Non-reactive gases
WETTED MATERIALS
PHYSICAL PROPERTIES
PBT (polybutylene terephthalate) glass filled;
430FR series stainless steel; 302 series stainless
steel; Viton (FKM) or silicone elastomer
Operating environment (continuous duty) 0 to 50 °C
Storage temperature
Spacing
-40 to 70 °C
10 mm (centerline)
ELECTRICAL
Porting
Barbs for 1.98 mm (0.078 in) I.D. tubing
or manifold mount with gasket
Power
0.5 W
Weight
Voltage
5, 12, 24 VDC
PC pins
without electronics
with electronics
10.7 g
12 g
Electrical connections
Internal volume
0.131 cm3 (0.0080 in3)
Ten-X is a registered trademark of Parker Hannifin Corporation.
E / 11260 / A
1/4
www.sensortechnics.com
Ten-X®
10 mm switching soleniod valve
PERFORMANCE CHARACTERISTICS
Orifice sizes/
Equivalent CV
Part no.
Pressure
Minimum flow
Leak rate2 Response
1
914-1...
(silicone elastomer)
<5 ms
≤0.016 sccm
0...6 psi
cycling
8 lpm @ 6 psi,
22 lpm @ 30 psi
0.060" (1.52 mm)/
0.042 CV
0...6 psi,
0...20 psi,
0...30 psi
914-2...
(Viton elastomer)
<20 ms
≤0.2 sccm
cycling
FLOW CURVES (typical air flow at 24 °C)3
6 psi devices
20 psi and 30 psi
devices
Notes:
1
The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a
valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow
dynamics design. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV).
sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and
pressure. 1000 sccm = 1 slpm.
2
3
slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.
1 slpm = 1000 sccm.
E / 11260 / A
2/4
www.sensortechnics.com
Ten-X®
10 mm switching soleniod valve
OUTLINE DRAWING AND MANIFOLD MOUNT DIAGRAM
6 psi devices
0.236 (6.00)
0.020 (0.5)
sq. pins
1.139 (28.93)
0.077 (1.96)
0.575
(14.61)
Long pin
Normally open port
Common port
Normally closed port
0.475
(12.07)
0.375
(9.53)
Short pin
0.170
(4.32)
0.148 (3.75)
Ø 0.120 (3.05)
Ø 0.093 (2.36)
Barb fittings for
0.078 (1.98) I.D.
polyurethane tubing
0.030 (0.76)
for use with wire hold down
for PCB mounting
dimensions in inches (mm)
0.976 (24.79)
0.766 (19.46)
0.212 (5.38)
0.871
(22.12)
0.197
(5.0)
2-56
UNC-2B
0.394
(10.01)
0.394
0.390
(9.91)
(10.01)
0.195
(4.95)
Ø 0.090
Ø 0.132 ±0.001 x 0.180
Feature for
2-56 screw for
valve mounting
Ø 0.154 ±0.003 x 0.055 ±0.002
c'drill 40° to Ø 0.132
0.766
(19.46)
0.976
0.174 (4.42)
0.870 (22.10)
1.25 (31.78)
0.207 (5.26)
(Ø 2.29
(24.79)
Ø 3.35 ±0.025 x 4.57
Ø 3.91 ±0.076 x 1.4 ±0.05
c'drill 40° to Ø 3.35)
20 psi and 30 psi devices with electronics
0.025 (0.64)
0.100
(2.54)
1.303 (33.10)
1.174 (29.81)
sq. pins
0.361
(9.17)
0.212
(5.38)
0.619
(15.72)
Normally open port
Common port
Normally closed port
0.170
(4.32)
Ø 0.120 (3.05)
dimensions in inches (mm)
Barb fittings for
0.078 I.D.
0.035 (0.89)
Ø 0.093 (2.36)
polyurethane tubing
0.871
(22.12)
0.976 (24.79)
0.766 (19.46)
0.267 (6.78)
0.197
(5.0)
2-56
UNC-2B
0.394
(10.01)
0.394
(10.01)
0.390
(9.91)
Ø 0.090
Ø 0.132 ±0.001 x 0.180
0.195
(4.95)
Feature for
2-56 screw for
valve mounting
Ø 0.154 ±0.003 x 0.055 ±0.002
c'drill 40° to Ø 0.132
0.766
(19.46)
0.976
(24.79)
(Ø 2.29
0.870 (22.10)
0.262 (6.65)
Ø 3.35 ±0.025 x 4.57
Ø 3.91 ±0.076 x 1.4 ±0.05
c'drill 40° to Ø 3.35)
E / 11260 / A
3/4
www.sensortechnics.com
Ten-X®
10 mm switching soleniod valve
ORDERING INFORMATION
6 psi devices
Series
914
Elastomer
Type
Model
Voltage
05 5 VDC
Electical
Accessories*
000 none
Options
1
2
Silicone
1* 2/3 way, NO, 6 psi
1
Standard
(without
electronics)
1
2
Short pins
Viton (FKM) 2** 2/3 way, NC, 6 psi
6** Distributor, 6 psi
12 12 VDC
24 24 VDC
Long pins
* Silicone elastomer only
** Viton (FKM) elastomer only
* please order
separately
Example: 914
1
1
1
05
1
000
20 psi and 30 psi devices with electronics
Series
914
Elastomer
Type
Model
Voltage
Electical
Accessories*
Options
2
2
Viton (FKM) 3* 2/3 way, NC, 30 psi
4** 2/3 way, NO, 30 psi
2
Integrated
electronics
05
5 VDC
3
Pins
(2.54 mm)
000
none
12 12 VDC
24 24 VDC
5** Distributor, 20 psi
* Silicone elastomer only
** Viton (FKM) elastomer only
* please order
separately
Example: 914
3
2
05
3
000
Note: Not all combinations might be available.
Please contact your nearest Sensortechnics sales representative for further information.
Accessories (please order separately using the following order numbers)
Order No.
Description
191-000112-010 (free of charge)
191-000112-012 (free of charge)
195-000211-001 (free of charge)
195-000242-001 (free of charge)
590-000073-001 (extra charge)
Mounting screws for 6 psi devices (2 screws per valve)
Mounting screw for 20 psi and 30 psi devices (2 screws per valve)
Manifold gasket (FKM) for 6 psi devices (1 gasket per valve)
Manifold gasket (FKM) for 20 psi and 30 psi devices (1 gasket per valve)
18 " leads w/ connector (only for devices with integrated electronics)
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11260 / A
4/4
www.sensortechnics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明