PS9005GD [SENSORTECHNICS]
OEM silicon stainless steel pressure sensor; OEM硅不锈钢压力传感器
| 型号： | PS9005GD |
| 厂家： | 
SENSORTECHNICS GMBH |
| 描述： | OEM silicon stainless steel pressure sensor |
| 文件： | 总4页 (文件大小：256K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PS9000 Series
OEM silicon stainless steel pressure sensor
FEATURES
· 0...5 psi to 0...500 psi gage
-15...15 psi to -15...100 psi gage
0...15 psi to 0...500 psi absolute
· Calibrated and temperature
compensated
· Small size
· Field interchangeable
· Reliable semiconductor technology
SERVICE
Scale:
1 cm
1 inch
Pressure inlet:
Housing:
all media compatible with
stainless steel 1.4401 (316)9
stainless steel, protection class
IP54, according to DIN40050
respectively NEMA4X1
ELECTRICAL CONNECTION
SPECIFICATIONS
Vs
(1)
Maximum ratings
Supply voltage
15 V
Temperature limits
Storage
-55°C to 100°C
-40°C to 100°C
0°C to 82°C
(3)
-
Operating
Compensated
Output
(2)
Humidity limits
0 - 98 %RH
10 gRMS
+
Vibration (5 Hz to 500 Hz)
Mechanical shock
Life
(4)
50 g for 11 msec
min. 1 million cycles
min. 100 MΩ
Insulation resistance at 50 VDC
December 2006 / 541
1/4
www.sensortechnics.com
PS9000 Series
OEM silicon stainless steel pressure sensor
PRESSURE RANGE SPECIFICATIONS
Part no.
pressure range
proof pressure2
burst pressure3
PS9005G...
PS9010G...
PS9015(A,G)...
PS9015V...
PS9030(A,G)...
PS9030V...
PS9050(A,G)...
PS9100(A,G)...
PS9100V...
PS9200(A,G)...
PS9300(A,G)...
PS9500(A,G)...
0 ... 5 psig
0 ... 10 psig
0 ... 15 psi
-15 ... 15 psig
0 ... 30 psi
15 psig
30 psig
45 psi
45 psig
90 psi
90 psig
150 psi
300 psi
300 psig
600 psi
900 psi
1200 psi
25 psig
45 psig
75 psig
75 psig
150 psi
150 psig
250 psi
300 psi
300 psig
1000 psi
1500 psi
2400 psi
-15 ... 30 psig
0 ... 50 psi
0 ... 100 psi
-15 ... 100 psig
0 ... 200 psi
0 ... 300 psi
0 ... 500 psi
PERFORMANCE CHARACTERISTICS unless otherwise noted, VS = 10,00 V, tamb = 25°C
Characteristics
Min.
Typ.
Max.
Unit
Zero pressure offset
Full scale span4
-2
48
98
0
50
100
±0.1
2
52
102
±0.25
mV
PS9005G...
all other devices
Non-linearity5
Pressure hysteresis5
Thermal effects (0°C to 82°C)6
±0.015 ±0.030
PS9005G...
Offset
Span
Offset
Span
±2.0
±2.0
all other devices
±0.5
±0.5
±0.1
±1.0
±1.0
±0.3
%FSO
Thermal hysteresis (0°C to 82°C)
Repeatability
±0.010 ±0.030
Long term stability of offset and span7
Response time (10 % to 90 %)8
Input impedance
Output impedance
Common mode output voltage
±0.1
0.1
25
±0.3
ms
kΩ
V
8.0
3.0
0.3
50
6.0
5.0
4.5
RECOMMENDED MATING CONNECTOR M12 X 1
(order number ZP000112-B)
Connector NOT included in delivery!
M12 x 1
Ø 20
2/4
December 2006 / 541
www.sensortechnics.com
PS9000 Series
OEM silicon stainless steel pressure sensor
Specification notes:
IP54 (NEMA4X) protection is given when the connector is locked. For proper function the gage port is vented to the
atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure.
The maximum pressure that can be applied without changing the transducer´s performance or accuracy.
The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case.
Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Span is
ratiometric to the supply voltage
1.
2.
3.
4.
Linearity is based on Best fit Straight Line. Hysteresis is the maximum output difference at any point within the operating
pressure range for increasing and decreasing pressure.
5.
Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading.
Long term stability over a one year period.
Response time for step change from the zero pressure to the full scale pressure.
Other materials on special request. When using devices with optional nickel plated fittings, consider the media compatibility
of the fittings also.
6.
7.
8.
9.
OUTLINE DRAWING
NOM 67 (2.64)
47 (1.85)
6.5
(0.26)
vent hole¹
4
1
3
2
Detail A
Detail A
ELECTRICAL CONNECTION
Pin
1
Connection
+Vs
2
Vout+
Vout-
3
4
-Vs
o-ring grove for o-ring
11.8 x 1.8 (0.456 x 0.071)
(ZA004029)
dimensions in mm (inches)
December 2006 / 541
3/4
www.sensortechnics.com
PS9000 Series
OEM silicon stainless steel pressure sensor
OPTIONAL PRESSURE FITTINGS
male fittings
female fittings
B
C
G
F
A
D
E
H
Dimensions in mm (inches)
Dimensions in mm (inches)
A
B
C
D (Hex.)
14 (9/16")
14 (9/18")
17 (11/16")
22 (7/8")
E
F
G
H (Hex.)
14 (9/16")
17 (11/16")
22 (7/8")
1/8" BSPT
1/4" BSPT
8 (0.315)
12 (0.472)
13 (0.512)
5.5 (0.217)
5 (0.197)
7 (0.276)
1/8" BSP
1/4" BSP
3/8" BSP
1/2" BSP
5 (0.197)
7 (0.276)
6 (0.236)
18 (0.707)
15 (0.591)
20 (0.787)
20 (0.787)
3/8" BSPT 11.5 (0.453)
1/2" BSPT
1/8" BSP
1/4" BSP
3/8" BSP
1/8" NPT
1/4" NPT
16 (0.630)
23 (0.906) 24 (15/16")
12.5 (0.492) 11 (0.433)
14 (9/16")
19 (3/4")
8.5 (0.335)
12.5 (0.492)
10 (0.394)
14 (0.551)
5 (0.197)
7 (0.276)
13 (0.512)
6 (0.236)
22 (7/8")
17 (11/16")
22 (7/8")
ORDERING INFORMATION
PS9
xxx
x
x
PS9000 Series
Fitting size
D: 1/8" BSPT male, brass, nickel plated
E: 1/4" BSPT male, brass, nickel plated
F: 3/8" BSPT male, brass, nickel plated
G: 1/2" BSPT male, brass, nickel plated
005:
0 ... 5 psi (gage only)
0 ... 10 psi (gage only)
0 ... 15 psi
0 ... 30 psi
0 ... 50 psi
010:
01510:
03010:
050:
K: 1/8" NPT male, brass, nickel plated
L: 1/4" NPT male, brass, nickel plated
M: 1/8" NPT male, SS 1.4305 (303)
N: 1/4" NPT male, SS 1.4305 (303)
10010: 0 ... 100 psi
Pressure mode
A: absolute pressure
G: gage pressure
200:
300:
500:
0 ... 200 psi
0 ... 300 psi
0 ... 500 psi
P: G 1/8" (BSP) male, brass, nickel plated
Q: G 1/4" (BSP) male, brass, nickel plated
R: G 3/8" (BSP) male, brass, nickel plated
S: G 1/2" (BSP) male, brass, nickel plated
V: vacuum/gage pressure
U: G 1/8" (BSP) female, brass, nickel plated
V: G 1/4" (BSP) female, brass, nickel plated
W: G 3/8" (BSP) female, brass, nickel plated
X: G 1/2" (BSP) female, brass, nickel plated
Note 10: also available as vacuum/gage version
Y: G 1/8" (BSP) male, SS 1.4305 (303)
no optional fitting
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
4/4
December 2006 / 541
www.sensortechnics.com
相关型号：
PS9009-F3
LOW IF TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
PS9009-V-F3
LOW IF TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
PS9009-Y-AX
LOW IF TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 5-PIN SSOP (LSO5) PHOTOCOUPLER
RENESAS
©2020 ICPDF网 联系我们和版权申明