PTE005D4C [SENSORTECHNICS]
Precision differential pressure transmitters;
| 型号： | PTE005D4C |
| 厂家： | 
SENSORTECHNICS GMBH |
| 描述： | Precision differential pressure transmitters |
| 文件： | 总5页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BTE5000 / PTE5000 / PTU5000 Series
Precision differential pressure transmitters
FEATURES
· 25 mbar to 10 bar, 0.3 to 150 psi
differential pressure
· 1...6 V or 4...20 mA output12
· Precision temperature compensated
and calibrated
· Rugged aluminium housing
· Female 1/8" BSP and 1/8" NPT fittings
MEDIA COMPATIBILITY
Pressure inlet:
Non-corrosive, non-ionic media such as air, dry gases
and the like
Housing:
Aluminium, protection class IP 67 (according to
DIN EN 60529, NEMA 6)1
SPECIFICATIONS10,11
ELECTRICAL CONNECTION
Maximum ratings
1...6 V output version
Supply voltage
12...32 V
1
+Vs
12 to 32 V
Output current BTE(M)/PTE/PTU5...D1...
Source
Sink
20 mA
10 mA
2
Vout
Sensor
V
4
3
GND
Output current BTE(M)/PTE/PTU5...D4...
30 mA
-Vs
Temperature limits
Storage
Operating
case
-40...85 °C
-25...85 °C
0...70°C
Compensated
4...20 mA output version
Proof pressure2
BTEM5x025... / PTx5000.3...
BTEM5x070..., BTEM5x350... /
PTx5001..., PTx5005...
all others
0.35 bar / 5 psi
1.4 bar / 20 psi
1
+Vs
12 to 32 V
GND
Sensor
2 x rated pressure
V
RL
4
Pressure at any port3
BTEM5x025... / PTx5000.3...
all others
-Vs
3.5 bar / 50 psi
12 bar / 175 psi
3
case
E / 11101 / B
1/5
www.first-sensor.com
www.sensortechnics.com
BTE5000 / PTE5000 / PTU5000 Series
Precision differential pressure transmitters
COMMON PERFORMANCE CHARACTERISTICS8
Characteristics
Min.
Typ.
Max.
Unit
Thermal effects
(0 to 70°C)6
Offset all ≤ 70 mbar / 1 psid devices
±0.025 ±0.125
±0.008 ±0.040
±0.005 ±0.025
±0.001 ±0.045
all 350 mbar / 5 psid devices
all others
Span
%FSO/°C
Non-linearity and hysteresis4
Long term stability5
±0.2
±0.2
0.04
1
±1
%FSO
ms
Output noise (0 ≤ f ≤ 1 kHz)
Response time (10 to 90 %)
INDIVIDUAL PERFORMANCE CHARACTERISTICS8
1...6 V output versions (VS = 15 V, tamb = 25°C, RL > 100 kΩ, com. mode pressure = 0)
Characteristics
Min.
Typ.
Max.
Unit
Zero pressure offset
Full scale span7
BTE(M)5P... / PTx5P...
all others
3.4
0.9
3.5
1.0
3.6
1.1
BTE(M)5P... / PTx5P...
all others
2.4
4.9
2.5
5.0
2.6
5.1
V
6.0
Full scale output
Power supply rejection
Offset
Span
0.05
0.03
%FSO/V
Ω
Output impedance
Power consumption
50
60
mW
4...20 mA output versions (VS = 15 V, tamb = 25°C, RL = 100 Ω, com. mode pressure = 0)
Characteristics
Min.
Typ.
Max.
Unit
Zero pressure offset
Full scale span7
BTE(M)5P... / PTx5P...
all others
11.9
3.9
12.0
4.0
12.1
4.1
BTE(M)5P... / PTx5P...
all others
7.9
15.9
8.0
16.0
8.1
16.1
mA
20.0
Full scale output
Power supply rejection
Offset
Span
0.05
0.03
%FSO/V
Ω
Output impedance
0.1
Power consumption (IL = 20 mA)
260
mW
E / 11101 / B
2/5
www.first-sensor.com
www.sensortechnics.com
BTE5000 / PTE5000 / PTU5000 Series
Precision differential pressure transmitters
LOAD LIMITATION
4...20 mA output versions
1200
Ohm
1000
800
600
400
200
operating
range
0
10
20
30
V
Vsupply
ELECTROMAGNETIC CAPABILITY9
Test conditions
Criterion Interference
Radiated, radio frequency
electromagnetic field immunity (RFI)
EN61000-4-3: 10 V/m, 80 to 1000 MHz
80 % AMC (1 kHz)
A
B
B
A
<1 %FSO
<1 %FSO
<1 %FSO
<1 %FSO
Electrical fast transient /
burst immunity (EFT)
EN61000-4-4: ±2 kV
Electrostatic discharge immunity
test (ESD)
EN61000-4-2: ±4 kV, contact discharge
±8 kV, air discharge
Immunity to conducted disturbances EN61000-4-6: 0.15 to 80 MHz
induced by radio-frequency fields
10 V, 80 % AMC (1 kHz)
Specification notes:
1. IP 67 protection for BTE(M)5...A / PTx5...A is given with locked connector only.
2. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
3. This is the highest pressure which can be applied to any port at any time. At the same time the differential pressure between
the ports H and L must not exceed the maximum proof pressure.
4. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span.
5. Long term stability is the change in output after one year or 1 million pressure cycles.
6. Thermal effects tested and guaranteed from 0 - 70 °C relative to 25°. All specifications shown are relative to 25°C.
7. Full scale span is the algebraic difference between the positive full scale output and zero pressure offset.
8. Higher pressure applied to port H.
9. Test are in accordance with EN 61000-6-2.
10. CE-labelling is in accordance with 2004/108/EC.
11. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC.
12. 0...10 V square rooting output signal on special request.
E / 11101 / B
3/5
www.first-sensor.com
www.sensortechnics.com
BTE5000 / PTE5000 / PTU5000 Series
Precision differential pressure transmitters
OUTLINE DRAWING
Connector version
NOM 86.0 (3.39)
40.0
(1.58)
72.0 (2.84)
H: high pressure port
L: low pressure port
20.0
(0.79)
13.5 diam. (0.53)
mating plug
8.0 (0.31) min.
4
M12 x 1
(0.47)
1
3
2
8.0 (0.31) min.
2 x M5
(UNC 10-24)
9.0
(0.35)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
ELECTRICAL CONNECTION
Connection
dimensions in mm
(inches)
mass: typ. 170 g
1 - 6 V
output
4 - 20 mA
output
Pin
1
2
3
4
+Vs
Vout
case
-Vs
+Vs
NC
case
-Vs
Cable version
40.0
(1.58)
90.0 (3.54)
72.0 (2.84)
H: high pressure port
L: low pressure port
20.0
(0.79)
13.5 diam. (0.53)
1 m (3.3 ft) shielded cable
4 x 0.25 mm² (AWG24)
8.0 (0.31) min.
8.0 (0.31) min.
9.0
(0.35)
2 x M5
(UNC 10-24)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
ELECTRICAL CONNECTION
Connection
dimensions in mm
(inches)
mass: typ. 220 g
1 - 6 V
output
4 - 20 mA
output
bare case/shield case/shield
brown
white
+Vs
NC
+Vs
NC
green
yellow
Vout
-Vs
NC
-Vs
E / 11101 / B
4/5
www.first-sensor.com
www.sensortechnics.com
BTE5000 / PTE5000 / PTU5000 Series
Precision differential pressure transmitters
RECOMMENDED CABLE/CONNECTOR ACCESSORY
for connector version
Order number ZK000101, other cable length on special request
NOM 2 m
PIN CONNECTION
Pin
Flying lead end
1
2
3
4
brown
green
white + shield
yellow
NOM
60
Included in delivery!
M12 x 1
Ø 20
ORDERING INFORMATION
BT/PT
x
(M)
5xxx
D
x
x
Calibration
Electrical connection
BT: calibration in mbar/bar
PT: calibration in psi
A: connector version
C: cable version
Pressure connection
E: 1/8" BSP female
U: 1/8" NPT female
Output signal
1: 1...6 V
4: 4...20 mA
For mbar ranges only
Differential pressure
Pressure range
BTE5000 series
PTE/PTU5000 series
0025:
P025:
0070:
P070:
0350:
0...25 mbar
-25...+25 mbar
0...70 mbar
-70...+70 mbar
0...350 mbar
000.3:
001:
P01:
005:
P05:
015:
0...0.3 psi
0...1 psi
-1...+1 psi
0...5 psi
-5...+5 psi
0...15 psi
P350: -350...+350 mbar
001:
P01:
002:
005:
010:
0...1 bar
-1...+1 bar
0...2 bar
0...5 bar
0...10 bar
P15: -15...+15 psi
030:
100:
150:
0...30 psi
0...100 psi
0...150 psi
Other pressure ranges and options are widely available. Please contact First Sensor.
First Sensor reserves the right to make changes to any products herein. First Sensor does not assume any liability arising out of the application
or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11101 / B
5/5
www.first-sensor.com
www.sensortechnics.com
相关型号：
©2020 ICPDF网 联系我们和版权申明