PTUL5P02D1A [SENSORTECHNICS]
Precision very low differential pressure transmitters; 精度非常低的差压变送器型号: | PTUL5P02D1A |
厂家: | SENSORTECHNICS GMBH |
描述: | Precision very low differential pressure transmitters |
文件: | 总6页 (文件大小:136K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
FEATURES
· 1 to 10 mbar, 1 to 10 "H2O
differential pressure
· High level output,
1...6 V or 4...20 mA (2-wire connection)
· Precision temperature compensated
and calibrated
· Rugged aluminium housing
· Female 1/8" BSP and 1/8" NPT fittings
MEDIA COMPATIBILITY
Pressure inlet:
Non-corrosive, non-ionic working fluids such as air, dry
gases and the like
Housing:
Aluminium, protection class IP 67 (according to
DIN EN 60529) respectively NEMA 61
ELECTRICAL CONNECTION
SPECIFICATIONS12
1...6 V output version
1
Maximum ratings
12 to 32 V
+Vs
Vout
-Vs
Supply voltage11
12 to 32 V
2
4
3
sensor
Output current
V
BTEL/PTUL5...D1...
GND
Source
Sink
BTEL/PTUL5...D4...
20 mA
10 mA
30 mA
case
Temperature limits
Storage
-40 to 100°C
-25 to 85°C
0 to 50°C
4...20 mA output version
Operating
Compensated
1
12 to 32 V
GND
Proof pressure2
BTEL/PTUL5...01D...
BTEL/PTUL5...02D...
all others
Pressure at any port3
BTEL/PTUL5...01D...
BTEL/PTUL5...02D...
all others
+Vs
250 mbar / 100 "H2O
250 mbar / 100 "H2O
350 mbar / 150 "H2O
sensor
V
R
4
-Vs
L
500 mbar / 200 "H2O
500 mbar / 200 "H2O
750 mbar / 300 "H2O
3
case
1/6
June 2008 / 094
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
COMMON PERFORMANCE CHARACTERISTICS9
Characteristics
Min.
0
Typ.
Max.
1
Unit
Operating pressure
BTEL5001...
BTEL5P01...
BTEL5002...
BTEL5P02...
BTEL5005...
BTEL5P05...
BTEL5010...
BTEL5P10...
PTUL5001...
PTUL5P01...
PTUL5002...
PTUL5P02...
PTUL5005...
PTUL5P05...
PTUL5010...
PTUL5P10...
-1
0
1
2
-2
0
2
mbar
5
-5
0
5
10
10
1
-10
0
-1
0
1
2
-2
0
2
"H2O
5
-5
0
5
10
10
-10
Position sensitivity
0.5
±0.1
0.04
±0.5
±0.2
±0.08
%FSO/g
%FSO
Non-linearity and hysteresis4
Output noise (0 < f < 1 kHz)
Long term stability5
±0.25
BTEL/PTUL5...01D...
all others
Thermal effects (0 to 50°C)6
Offset BTEL5...01D...
±0.16
±0.10
BTEL5...02D.../
PTUL5...01D...
±0.04
%FSO/°C
ms
all others
±0.02
±0.04
1
±0.06
±0.08
Span
Response time (10 to 90 %)
2/6
June 2008 / 094
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
PERFORMANCE CHARACTERISTICS9
1...6 V output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL > 100 kΩ, com. mode pressure = 0)
Characteristics
Min.
Typ.
Max.
Unit
Zero pressure offset7
BTEL/PTUL50...D1...
BTEL/PTUL5P...D1...
0.9
3.4
1.0
3.5
1.1
3.6
BTEL/PTUL50...D1...
BTEL/PTUL5P...D1...
4.9
2.4
5.0
2.5
5.1
2.6
V
Full scale span8
6.0
Full scale output
Ω
Output impedance
Power supply rejection
50
Offset
Span
0.05
0.03
%FSO/V
mW
Power consumption
60
4...20 mA output versions (unless otherwise noted VS = 15 V, tamb = 25°C, RL = 100 Ω, com. mode pressure = 0)
Characteristics
Min.
Typ.
Max.
Unit
Zero pressure offset7
BTEL/PTUL50...D4...
BTEL/PTUL5P...D4...
3.9
11.9
4.0
12.0
4.1
12.1
Full scale span8
BTEL/PTUL50...D4...
BTEL/PTUL5P...D4...
15.9
7.9
16.0
8.0
16.1
8.1
mA
20.0
Full scale output
Ω
Output impedance
Power supply rejection
0.1
Offset
Span
0.05
0.03
%FSO/V
mW
Power consumption (IL = 20 mA)
260
ELECTROMAGNETIC CAPABILITY10
Test conditions
Criterion Interference
Radiated, radio frequency EN61000-4-3: Grade 3
electromagnetic field
immunity (RFI)
10 V/m, 80 MHz to 1000 MHz
80 % AMC (1 kHz)
A
<1 % FSO
Electrical fast transient /
burst immunity (EFT)
EN61000-4-4: Grade 3
B
B
<1 % FSO
<1 % FSO
±2 kV
Electrostatic discharge
immunity test (ESD)
EN61000-4-2: Grade 4
±8 kV, contact discharge
EN61000-4-6: Grade 3
0,15 to 80 MHz
10 V, 80 % AMC (1 kHz)
Immunity to conducted
disturbances induced by
radio-frequency fields
A
<1 % FSO
3/6
June 2008 / 094
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
Specification notes:
IP 67 protection for BTEL/PTUL5...A is given with locked connector only.
1.
2.
3.
Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element.
This is the highest pressure which can be applied to any port at any time. At the same time the differential pressure
between the ports H and L must not exceed the maximum proof pressure.
Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span.
Long term stability is the change in output after one year or 1 million pressure cycles.
Thermal effects tested and guaranteed from 0...50 °C relative to 25°. All specifications shown are relative to 25°C.
Calibrated after minimum 3 minutes warm-up time.
4.
5.
6.
7.
Full scale span is the algebraic difference between the positive full scale output and zero pressure offset.
Higher pressure applied to port H.
8.
9.
Test are in accordance with EN61000-6-2, April 1999.
The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the
load limitation diagram.
10.
11.
CE-labelling is in accordance with 89/336/EEC.
12.
LOAD LIMITATION
4...20 mA output version
1200
Ohm
1000
800
600
400
200
operating
range
0
10
20
30
V
Vsupply
4/6
June 2008 / 094
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
OUTLINE DRAWING
Connector version
NOM 86.0 (3.39)
40.0
(1.58)
72.0 (2.84)
H: high pressure port
L: low pressure port
20.0
(0.79)
13.5 diam. (0.53)
mating plug
8.0 (0.31) min.
4
M12 x 1
(0.47)
1
3
2
8.0 (0.31) min.
2 x M5
(UNC 10-24)
9.0
(0.35)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
ELECTRICAL CONNECTION
Connection
1...6 V
output
4...20 mA
output
mass: typ. 170 g
dimensions in mm (inches)
Pin
1
2
3
4
+Vs
Vout
case
-Vs
+Vs
NC
case
-Vs
Cable version
40.0
(1.58)
90.0 (3.54)
72.0 (2.84)
H: high pressure port
L: low pressure port
20.0
(0.79)
13.5 diam. (0.53)
1 m (3.3 ft) shielded cable
4 x 0.25 mm² (AWG24)
8.0 (0.31) min.
8.0 (0.31) min.
ELECTRICAL CONNECTION
Connection
9.0
(0.35)
2 x M5
(UNC 10-24)
BTE.../PTE...: 2 x 1/8" BSP
PTU...: 2 x 1/8" NPT
1...6 V
4...20 mA
output
output
bare
brown
white
green
yellow
case/shield case/shield
+Vs
NC
+Vs
NC
mass: typ. 220 g
dimensions in mm (inches)
Vout
-Vs
NC
-Vs
5/6
June 2008 / 094
www.sensortechnics.com
BTEL5000 / PTUL5000 Series
Precision very low differential pressure transmitters
RECOMMENDED CABLE/CONNECTOR ACCESSORY
for connector version
Order number ZK000101, other cable lengths on special request
NOM 2 m
PIN CONNECTION
Flying lead end
Pin
1
2
3
4
brown
green
white + shield
yellow
NOM
60
Included in delivery!
M12 x 1
Ø 20
dimensions in mm
ORDERING INFORMATION
BTEL5/PTUL5
x
xx
D
x
x
Electrical connection
A: connector version
C: cable version
Calibration
BTEL: calibration in mbar
PTUL: calibration in "H2O
Output signal
1: 1...6 V
4: 4...20 mA
Reading
0:
unidirectional reading
bidirectional reading
P:
Differential pressure
Pressure range
01: 1 mbar / 1 "H2O
(0...1 mbar not available
02:
05:
2 mbar / 2 "H2O
5 mbar / 5 "H2O
for output signal 1...6 V)
10: 10 mbar /10 "H2O
Note:
Other pressure ranges and options are widely available.
Please contact your nearest Sensortechnics sales representative.
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
6/6
June 2008 / 094
www.sensortechnics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明