RTOP010G1 [SENSORTECHNICS]
Stainless steel pressure sensors; 不锈钢压力传感器型号: | RTOP010G1 |
厂家: | SENSORTECHNICS GMBH |
描述: | Stainless steel pressure sensors |
文件: | 总6页 (文件大小:190K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RTO Series
Stainless steel pressure sensors
FEATURES
· 0...3 to 0...500 psi and
-15...15 to -15...100 psi
· Absolute and gage pressures
· Calibrated and temperature
compensated
· Rugged stainless steel isolated
package
· Sensortechnics PRO services
SPECIFICATIONS
ELECTRICAL CONNECTION
Maximum ratings
Supply voltage
+15 VDC
Temperature ranges:
Compensated
Operating
Storage
0 to +82°C
-40 to +125°C
-40 to +125°C
-out
+out
Vs-
Vibration:
10 g at 20 to 2000 Hz
100 g for 11 msec.
Shock:
Vs+
Life:
1 million cycles minimum
100 MΩ at 50 VDC
Insulation resistance (min.):
E / 11714 / A
1/6
www.sensortechnics.com
RTO Series
Stainless steel pressure sensors
PRESSURE SENSOR CHARACTERISTICS
Part number
Pressure range
Proof pressure6
Burst pressure7
RTOP003G...
RTOP005G...
0...3 psig
0...5 psig
9 psig
15 psig
30 psig
45 psi
15 psig
25 psig
45 psig
75 psig
75 psig
150 psi
150 psig
250 psi
300 psi
300 psig
1000 psi
1500 psi
2400 psi
RTOP010G...
0...10 psig
0...15 psi
-15...15 psig
0...30 psi
RTOP015(A,G)...
RTOP015V...
45 psig
90 psi
RTOP030(A,G)...
RTOP030V...
-15...30 psig
0...50 psi
90 psig
150 psi
300 psi
300 psig
600 psi
900 psi
1200 psi
RTOP050(A,G)...
RTOP100(A,G)...
RTOP100V...
0...100 psi
-15...100 psig
0...200 psi
0...300 psi
0...500 psi
RTOP200(A,G)...
RTOP300(A,G)...
RTOP500(A,G)...
E / 11714 / A
2/6
www.sensortechnics.com
RTO Series
Stainless steel pressure sensors
PERFORMANCE CHARACTERISTICS
(VS = 10 VDC ±0.01 VDC, tamb = 25°C)
Max.
+1.5
-2.0
Characteristics
Min.
-1.5
-2.0
-1.0
48
Typ.
0
Units
Zero pressure offset
Full scale span1
all devices up to 10 psi
all RTO...A... devices9
all others
0
0
-1.0
mV
3 psi and 5 psi devices
all others
50
52
98
100
±0.1
±0.015
102
Non-linearity2
±0.25
±0.030
±2.0
±2.0
±1.0
±1.0
±0.3
±0.030
±0.3
Pressure hysteresis2
Thermal effects3
(0 to 82°C)
3 psi and 5 psi devices
all others
Offset
Span
Offset
Span
±0.5
±0.5
±0.1
±0.010
±0.1
0.1
%FSO
Thermal hysteresis (0 to 82°C)
Repeatability
Long term stability of offset and span4
Response time (10 to 90 %)
Input impedance
ms
kΩ
V
8.0
3.0
0.5
25
50
6.0
2.0
Output impedance
4.5
Common mode voltage8
1.3
Specification notes:
1. Span is the algebraic difference between the output voltage at full scale pressure and the output at zero pressure. Full scale
span is ratiometric to the supply voltage.
2. Linearity is based on Best fit Straight Line from the zero to the full scale pressure. Hysteresis is the maximum output
difference at any point within the operating pressure range for increasing and decreasing pressure.
3. Maximum error band of the offset voltage or span over the compensated temperature range, relative to the 25°C reading.
4. Long term stability over a six month period.
5. Response time for a step change from the zero pressure to the full scale pressure .
6. The maximum pressure that can be applied without changing the transducer´s performance or accuracy.
7. The maximum pressure that can be applied to a transducer without rupture of either the sensing element or transducer case.
8. Common mode voltage as measured from output to ground.
9. Absolute devices with improved zero pressure offset values are available on request. Please contact your nearest
Sensortechnics sales office for further information.
E / 11714 / A
3/6
www.sensortechnics.com
RTO Series
Stainless steel pressure sensors
PHYSICAL DIMENSIONS
RTO...1 (cell package)
2.0 NOMEX INSULATED
RIBBON CABLE
Ø .594 (15.09)
RING I.D.
W/ .100 (2.54) PIN SPACING
(24 AWG EQUIV.)
Ø .736 (18.69)
Ø .746
(18.95)
Ø .650 (16.51)
WELD RELIEF
O-RING GROOVE
4 x .125 (3.2)
Ø .668 (16.98)
CKT CAVITY
GROOVE FOR
AS568-016 O-RING (15.6 x 1.78)
third angle projection
Do not touch the diaphragm!
mass: 20 g
dimensions in inches (mm)
Note:
Non-concentricity effects at the diaphragm weld area may cause run out of up to ±0.006“ between the
upper and lower portions of the sensor body (it is recommended to use a counter bore in the mating bore
used with this device to allow for this non-concentricity).
RTO...2 (flush mount package)
2.0 NOMEX INSULATED
RIBBON CABLE
W/ .100 (2.54) PIN SPACING
(24 AWG EQUIV.)
Ø .736 (18.69)
WELD RELIEF
Ø .746
(18.95)
Ø .650 (16.51)
O-RING GROOVE
4 x .125 (3.2)
Ø .668 (16.98)
CKT CAVITY
GROOVE FOR
AS568-016 O-RING (15.6 x 1.78)
Do not touch the diaphragm!
third angle projection
mass: 18 g
dimensions in inches (mm)
E / 11714 / A
4/6
www.sensortechnics.com
RTO Series
Stainless steel pressure sensors
PHYSICAL DIMENSIONS (cont.)
RTO...7 (1/4 BSP package)
2.0 NOMEX INSULATED
RIBBON CABLE
W/ .100 (2.54) PIN SPACING
(24 AWG EQUIV.)
.75 (19)
HEX
Ø .438
Ø .720
Ø .746
(18.95)
(11.13)
(18.89)
4 x .125 (3.2)
Ø .668 (16.98)
CKT CAVITY
Ø .171 (4.34)
third angle projection
mass: 52 g
dimensions in inches (mm)
E / 11714 / A
5/6
www.sensortechnics.com
RTO Series
Stainless steel pressure sensors
ORDERING INFORMATION
Series
RTO
Pressure range
Pressure mode
Housing style
Options
P003
0...3 psi
0...5 psi
A*
Absolute
Gage
1
2
7
Cell
P005
G
Flush mount
1/4 BSP
P010
0...10 psi
V**
Vacuum/gage
P015
0...15 psi
P015(V)
P030
-15...+15 psi
0...30 psi
P030(V)
P050
-15...+30 psi
0...50 psi
P100
0...100 psi
-15...+100 psi
0...200 psi
0...300 psi
0...500 psi
P100(V)
P200
P300
P500
* from 15 psi upwards only
** for 15, 30 and 100 psi only
Example:
Note:
RTO
P015
A
2
Current supply versions are available on request.
Please contact your nearest Sensortechnics sales office for further information.
Sensortechnics PRO services:
· Extended guarantee period of 2 years
· Improved performance characteristics
· Custom product modifications and adaptations even for small quantities
· Advanced logistics models for supply inventory and short delivery times
· Technical support through application engineers on the phone or at your site
· Fastest possible technical response for design and QA engineers
... plus other services on request
Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the
application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.
E / 11714 / A
6/6
www.sensortechnics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明