X112SEB [SENSORTECHNICS]

8 mm switching soleniod valves; 8毫米切换soleniod阀


型号：	X112SEB
厂家：	SENSORTECHNICS GMBH
描述：	8 mm switching soleniod valves 8毫米切换soleniod阀
文件：	总4页 (文件大小：91K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

X-Valve^®

8 mm switching soleniod valves

FEATURES

· 3-way, 2 position valve

(NO, NC & Distributor)

· Compact size, only 8 mm in width

· Meets pressure requirements

including 6, 30 & 100 psi

· Excellent leakage specification for over

25 million cycles

· Ensures high reliability with its single

piece body design

· Barbed pressure ports allow for direct

tubing or manifold assemblies

· Non-elastomeric versions with enhanced

media compatibility available on request

MEDIA COMPATIBILITY

PHYSICAL PROPERTIES

Non-reactive gases and selected liquids

Operating environment

X5...

all other

15 to 50 °C

0 to 50 °C

WETTED MATERIALS

Storage temperature

Length

-40 to 70 °C

24 mm (0.92 in)

7.9 mm (0.31 in)

9.5 mm (0.375 in)

8 mm (centerline)

PBT (polybutylene terephthalate); 430 series

stainless steel; 302 series stainless steel

(passivated); FKM (fluoroelastomer); EPDM

(ethylene propylene diene monomer); silicone

Width

Height

ELECTRICAL

Spacing

Power

Porting

Universal barbs for 1/16 in I.D. tubing

(1/32 in wall max.);

X1... (6 psi)

all other (30 psi, 100 psi)

0.5 W

1.0 W

manifold mount with X-seal

Voltage

Electrical connections

3, 5, 12, 24 V_DC

Weight

4.5 g (0.16 oz)

PC pins, 4 mm centers

Internal volume

0.074 cm³(0.0045 in³)

X-Valve is a registered trademark of Parker Hannifin Corporation.

October 2008 / 250

1/4

www.sensortechnics.com

X-Valve^®

8 mm switching soleniod valves

PERFORMANCE CHARACTERISTICS

Orifice sizes/

Equivalent C_V

Part no.

X1...

Pressure Minimum flow

Leak rate²

Response

0.045" (1.143 mm)/

0.018 C_V

≤0.16 sccm (FKM, EPDM),

≤0.016 sccm (silicone)

0...6 psig

4 lpm @ 6 psi

6 lpm @ 30 psi

0.030" (0.762 mm)/

0.010 C_V

<20 ms

cycling

≤0.16 sccm

≤0.2 sccm

X2...

0...30 psig

0.020" (0.510 mm)/

0.005 C_V

X5...

0...100 psig 9 lpm @ 100 psi

FLOW CURVES (typical air flow)³

Notes:

The C_Vvalue is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a

valve. If several valves with the same nominal diameter are compared, the valve with the highest C_Vvalue has the best flow

dynamics design. The equivalent european measure is the k_Vvalue expressed in m³/h (k_V= 0.86 C_V).

sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and

pressure. 1000 sccm = 1 slpm.

slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure.

1 slpm = 1000 sccm.

October 2008 / 250

2/4

www.sensortechnics.com

X-Valve^®

8 mm switching soleniod valves

OUTLINE DRAWING

Side view

0.41

(10.3)

Long pin

0.28

(7.1)

Short pin

0.375

(9.5)

Normally open port

Normally closed port

3 x barb fitting for 1/16" I.D.

thin wall polyurethane tubing

dimensions in inches (mm)

Common port

Bottom view

0.916

(23.3)

0.150

(3.8)

0.640

(16.3)

0.100

(2.5)

to receptacle center line

0.310

(7.9)

0.157

(4.0)

receptacle contacts for

0.025 (0.6) SQ. terminal posts

0.155

(3.9)

dimensions in inches (mm)

Manifold mount diagram

Ø 0.047 x 0.20±0.02 (Ø1.2 x 5.1±0.5)

#0-80 UNF-2B x 0.15±0.02 ( 3.8±0.5)

0.315

(8.0)

0.030

(0.8)

0.157

(4.0)

0.5345

(13.58)

0.642

(16.3)

0.6746

(17.13)

Ø 0.090 x "Depth"

Ø 0.112/0.115 x 0.100

90° to Ø 0.132±0.003

(Ø 2.3 x "Depth"

Ø 2.8/2.9 x 2.5

90° to Ø 3.4±0.08)

0.315

(8.0)

dimensions in inches (mm)

October 2008 / 250

3/4

www.sensortechnics.com

X-Valve^®

8 mm switching soleniod valves

ORDERING INFORMATION

Model no.

Electical

connection

Optional

accessories*

Series

Voltage

Elastomer

Coil

Pressure Orifice

Type

wattage

Options

6 psi 0.045"

0.5 W universal 03*

1 W universal 05

3 V_DC

(6 & 30 psi only)

short pin

long pin

FKM

screw & gasket

no accessories

(1.143 mm)

30 psi 0.030"

5 V_DC

(6 psi only)

EPDM

(0.762 mm)

(6 psi only)

100 psi 0.020"

1 W NC

12 V_DC

24 V_DC

silicone

(0.510 mm)

(6 psi only)

* accessory field not

printed on valve

Sample

order no:

Note: Not all combinations might be available.

Non-elastomeric versions with enhanced media compatibility are available on request.

Please contact your nearest Sensortechnics sales representative for further information.

Accessories (please order separately using the following order numbers)

Order No.

ZK071248

Description

Clear transparent polyurethane tubing,

inner diameter 1/16 inch (1.6 mm), outer diameter: 1/8 inch (3.2 mm)

X-RETAINING CLIP

X-PORT PLUG

Solder clip for mounting

Port plug

X-CONNECTOR

12 " leads with connector

Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the

application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others.

October 2008 / 250

4/4

www.sensortechnics.com

相关型号：