A42180-06 [SEOUL]
Visible LED,;
| 型号： | A42180-06 |
| 厂家： | 
Seoul Semiconductor |
| 描述： | Visible LED, |
| 文件： | 总32页 (文件大小：4007K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
X42180-06
X42180-06
Features
• Super high flux output
and high luminance
• Designed for high
current operation
Z-Power series is designed for
high current operation and
high flux output applications.
• Low thermal resistance
• SMT solderability
• Lead free product
• RoHS compliant
Z-Power LED's thermal management
perform exceeds other power LED solutions.
It incorporates state of the art SMD design and Thermal
emission material.
Applications
• Mobile phone flash
Z Power LED is ideal light sources for general illumination
applications, custom designed solutions, automotive large
LCD backlights
• Automotive interior /
Exterior lighting
• Automotive signal lighting
• Automotive forward
lighting
• Torch
• Architectural lighting
• LCD TV / Monitor backlight
• Projector light source
• Traffic signals
• Task lighting
• Decorative / Pathway
lighting
• Remote / Solar powered
lighting
• Household appliances
*The appearance and specifications of the product may be changed
for improvement without notice.
Rev. 11
FEBRUARY. 2013
www.acriche.com
1
Document No. : SSC-QP-7-07-24 (Rev.00)
Full Code of Z-Power LED Series
Full code form : X1 X2 X3 X4 X5 X6 X7 – X8 X9 – X10 X11 X12 X13X14
1. Part Number
- X1 : Color
- X2 : Z-Power LED series number
- X3 : LENS type
- X4 : Chip quantity (or Power Dissipation)
- X5 : Package outline size
- X6 : Type of PCB
- X7 : Grade of characteristic code
2. Internal Number
- X8, X9 : Revision No.
3. Code Labeling
- X10 : Luminous flux (or Radiant flux for royal blue)
- X11 X12 X13 : Dominant wavelength (or x,y coordinates rank code)
- X14 : Forward voltage
4. Sticker Diagram on Reel & Aluminum Vinyl Bag
RANK :
X10X11X12X13X14
QUANTITY : 500
LOT NUMBER : XXXXXXXXXX-XXX-XXX-XXXXXXX
SSC PART NUMBER : XXXXXXX-XX
X1X2X3X4X5X6X7-X8X9
For more information about binning and labeling, refer to the Application Note -1
Rev. 11
FEBRUARY. 2013
www.acriche.com
2
Document No. : SSC-QP-7-07-24 (Rev.00)
Outline Dimension
1. Dome Type
SLUG
Cathode Mark
Lens
Body
Lead
Notes :
1. All dimensions are in millimeters. (tolerance : ±0.2 )
2. Scale : none
3. Slug of package is connected to anode.
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 11
FEBRUARY. 2013
www.acriche.com
3
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
1. Pure White (W42180-06)
1-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
80
Parameter
Symbol
Unit
Min
70
91
-
Max
[2]
T rank
U rank
ФV
91
-
lm
lm
Luminous Flux [1]
[2]
ФV
105
6300
75
Correlated Color Temperature [3]
CRI
CCT
Ra
-
K
-
-
-
Forward Voltage [4]
View Angle
VF
3.0
3.25
127
8.8
4
V
2Θ ½
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
1-2 Absolute Maximum Ratings
Parameter
Symbol
Value
1000 (@ Tj = 90 ºC) [7]
Unit
Forward Current
IF
mA
1800 (@ 1KHz, 1/10 duty)
4
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [8]
Pd
Tj
W
ºC
ºC
ºC
-
145(@ IF 700mA)
-40 ~ +85
Topr
Tstg
-
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5%
tester tolerance.
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. (25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC.
[7] IF Max is guaranteed under the TJ 90 ºC.
[8] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink.
Rev. 11
FEBRUARY. 2013
www.acriche.com
4
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
2. Warm White (N42180-06)
2-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
72
Parameter
Symbol
Unit
Min
Max
Luminous Flux [1]
Correlated Color Temperature [3]
CRI
ФV
-
-
-
-
lm
K
[2]
CCT
Ra
3000
93
-
-
-
Forward Voltage [4]
View Angle
VF
3.0
3.25
124
8.8
4
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
2-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
Pd
800
3.2
mA
W
Power Dissipation
145
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Tj
ºC
ºC
ºC
-
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
5
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
3. Warm White (N42180H-06)
3-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
86
Parameter
Symbol
Unit
Min
Max
Luminous Flux [1]
Correlated Color Temperature [3]
CRI
ФV
-
-
-
-
lm
K
[2]
CCT
Ra
3000
80
-
-
-
Forward Voltage [4]
View Angle
VF
3.0
3.25
124
8.8
4
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
3-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
Pd
800
3.2
mA
W
Power Dissipation
145
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Tj
ºC
ºC
ºC
-
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
6
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
4. Natural White (S42180-06)
4-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
76
Parameter
Symbol
Unit
Min
Max
Luminous Flux [1]
Correlated Color Temperature [3]
CRI
ФV
-
-
-
-
lm
K
[2]
CCT
Ra
4000
93
-
-
-
Forward Voltage [4]
View Angle
VF
3.0
3.25
124
8.8
4
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
4-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
Pd
800
3.2
mA
W
Power Dissipation
145
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [8]
Tj
ºC
ºC
ºC
-
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5%
tester tolerance.
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. (25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC.
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
7
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
5. Natural White (S42180H-06)
5-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
94
Parameter
Symbol
Unit
Min
Max
Luminous Flux [1]
Correlated Color Temperature [3]
CRI
ФV
-
-
-
-
lm
K
[2]
CCT
Ra
4000
80
-
-
-
Forward Voltage [4]
View Angle
VF
3.0
3.25
124
8.8
4
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
5-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
Pd
800
3.2
mA
W
Power Dissipation
145
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [8]
Tj
ºC
ºC
ºC
-
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT 5%
tester tolerance.
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. (25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC.
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
8
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
6. Blue (B42180-06)
6-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
22
Parameter
Symbol
Unit
Min
-
Max
-
Luminous Flux [1]
Dominant Wavelength[3]
Forward Voltage [4]
View Angle
ФV
lm
nm
[2]
D
VF
455
3.0
465
3.25
130
8.8
475
4
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
6-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
1000
mA
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Pd
Tj
4
W
ºC
ºC
ºC
-
145
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
2. Blue power light sources represented here are IEC825 Class 2 for eye safety
Rev. 11
FEBRUARY. 2013
www.acriche.com
9
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
7. Royal Blue (D42180-06)
7-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
468
457
3.25
130
8.8
Parameter
Symbol
Unit
Min
-
Max
-
Radiant Power [1]
Dominant Wavelength [3]
Forward Voltage [4]
View Angle
ФV
mW
nm
[2]
D
VF
455
3.0
460
3.8
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.2
7-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
1000
mA
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Pd
Tj
4
W
ºC
ºC
ºC
-
145
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram.
CCT 5% tester tolerance
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
2. Blue power light sources represented here are IEC825 Class 2 for eye safety
Rev. 11
FEBRUARY. 2013
www.acriche.com
10
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
8. Green (G42180-06)
8-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
70
Parameter
Symbol
Unit
Min
-
Max
-
Luminous Flux [1]
Dominant Wavelength[3]
Forward Voltage [4]
View Angle
ФV
lm
nm
[2]
D
VF
520
3.0
525
3.25
130
9.5
535
4.1
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
8.0
8-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
1000
mA
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Pd
Tj
4
W
ºC
ºC
ºC
-
145
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sin
Rev. 11
FEBRUARY. 2013
www.acriche.com
11
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
9. Red (R42180-06)
9-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
48
Parameter
Symbol
Unit
Min
-
Max
-
Luminous Flux [1]
Dominant Wavelength[3]
Forward Voltage [4]
View Angle
ФV
lm
nm
[2]
D
VF
618
2.0
625
2.3
130
9
630
3.0
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.8
9-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
Pd
800
2.4
mA
W
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Tj
145
ºC
ºC
ºC
-
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
12
Document No. : SSC-QP-7-07-24 (Rev.00)
Characteristics for Z-Power LED
10. Amber (A42180-06)
10-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Value
Typ
48
Parameter
Symbol
Unit
Min
-
Max
-
Luminous Flux [1]
Dominant Wavelength[3]
Forward Voltage [4]
View Angle
ФV
lm
nm
[2]
D
VF
585
2.0
590
2.3
130
9
595
3.0
V
2Θ 1/2
RθJ-B
RθJ-C
deg.
ºC /W
ºC /W
Thermal resistance [5]
Thermal resistance [6]
7.8
10-2 Absolute Maximum Ratings
Parameter
Symbol
Value
Unit
Forward Current
IF
800
mA
Power Dissipation
Junction Temperature
Operating Temperature
Storage Temperature
ESD Sensitivity [7]
Pd
Tj
2.4
W
ºC
ºC
ºC
-
145
Topr
Tstg
-
-40 ~ +85
-40 ~ +100
±10,000V HBM
*Notes :
[1] SSC maintains a tolerance of 10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of 0.5nm for dominant wavelength
[4] A tolerance of 0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC TJ 110 ºC)
RθJ-C is measured with only emitter. .(25 ºC TJ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC
[7] It is included the zener chip to protect the product from ESD.
--------------------------Caution--------------------------
1. Please do not drive at rated current more than 5 sec. without proper heat sink
Rev. 11
FEBRUARY. 2013
www.acriche.com
13
Document No. : SSC-QP-7-07-24 (Rev.00)
Color Spectrum, TA=25ºC
1. Pure White (W42180-06)
1.0
S ta nda rd e ye respo nse curve
0.8
0.6
0.4
0.2
0.0
300
400
500
600
700
800
900
W a v e le n g th (n m )
2. Warm White (N42180-06)
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
W a v e le n g th
Rev. 11
FEBRUARY. 2013
www.acriche.com
14
Document No. : SSC-QP-7-07-24 (Rev.00)
Color Spectrum, TA=25ºC
3. Warm White (N42180H-06)
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
W a v e le n g th
4. Natural White (S42180-06)
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
W a v e le n g th
Rev. 11
FEBRUARY. 2013
www.acriche.com
15
Document No. : SSC-QP-7-07-24 (Rev.00)
Color Spectrum, TA=25ºC
5. Natural White (S42180H-06)
1 .0
0 .8
0 .6
0 .4
0 .2
0 .0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
W a v e le n g th
6. Red, Amber, Green, Blue(Royal Blue)
1.0
0.8
0.6
0.4
0.2
0.0
400
500
600
700
W a v e le n g th (n m )
Rev. 11
FEBRUARY. 2013
www.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
16
Junction Temperature Characteristics
1. Relative Light Output vs. Junction Temperature at IF=350mA
120
100
80
60
40
Natural White, Warm White
20
Pure White
Blue(Royal Blue)
Green
0
25
50
75
100
125
Junction Temperature(OC)
100
80
60
40
20
0
Red
Amber
25
50
75
100
125
150
Junction Temperature [oC]
Rev. 11
FEBRUARY. 2013
17
www.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Junction Temperature Characteristics
2. Forward Voltage Shift vs. Junction Temperature at IF=350mA
0.0
-0.2
-0.4
-0.6
Pure White, Warm White, Natural White, Blue(Royal Blue)
Red
Amber
Green
-0.8
-1.0
25
50
75
100
125
150
Junction Temperature [OC]
3. Wavelength Shift vs Junction Temperature at IF=350mA
12
Red
Green
Blue(Royal Blue)
Amber
10
8
6
4
2
0
25
50
75
100
125
150
Rev. 11
Junction Temperature[oC]
FEBRUARY. 2013
www.acriche.com
18
Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Current Characteristics
1. Forward Voltage vs. Forward Current , TA=25 ºc
Blue(Royal Blue), Green, Pure White
Warm White, Natural White
1000
800
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Forward Voltage [V]
Red, Amber
800
700
600
500
400
300
200
100
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Forward Voltage [V]
Rev. 11
FEBRUARY. 2013
19
www.acriche.com
Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Current Characteristics
2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 ºc
2.5
Blue(Royal Blue), Green, Pure White
Warm White, Natural White
2.0
1.5
1.0
0.5
0.0
0
200
400
600
800
1000
Forward Current [mA]
2.5
2.0
1.5
1.0
0.5
0.0
Red, Amber
0
200
400
600
800
Forward Current [mA]
Rev. 11
FEBRUARY. 2013
www.acriche.com
20
Document No. : SSC-QP-7-07-24 (Rev.00)
Forward Current Characteristics
3. Forward Current vs Wavelength Shift, TA=25 ºc
8
6
Red
Green
Blue(Royal Blue)
Amber
4
2
0
-2
-4
0
100
200
300
400
500
600
700
800
900 1000
Forward current(mA)
Rev. 11
FEBRUARY. 2013
www.acriche.com
21
Document No. : SSC-QP-7-07-24 (Rev.00)
Ambient Temperature vs Allowable Forward Current
1-1. Pure White, Warm White, Natural White, Green, Blue(Royal Blue)
(TJMAX = 145 C, @350mA)
º
400
350
300
250
200
150
100
50
RjaT = 60oC/W
RjaT = 50oC/W
RjaT = 40oC/W
RjaT = 30oC/W
0
0
25
50
75
100
125
150
Ambient Temperature [oC]
1-2. Pure White, Warm White, Natural White, Green, Blue(Royal Blue)
C, @700mA)
(TJMAX = 145
º
800
700
600
500
400
300
200
100
0
RjaT = 35oC/W
RjaT = 30oC/W
RjaT = 25oC/W
RjaT = 20oC/W
0
25
50
75
100
125
150
Ambient Temperature [oC]
Rev. 11
FEBRUARY. 2013
www.acriche.com
22
Document No. : SSC-QP-7-07-24 (Rev.00)
Ambient Temperature vs Allowable Forward Current
1-3. Pure White, Green, Blue(Royal Blue)
(TJMAX = 90 ºC, at 1000mA)
1200
1000
800
RjaT = 25oC/W
RjaT = 20oC/W
600
400
200
0
0
25
50
75
100
125
150
Ambient Temperature [oC]
Rev. 11
FEBRUARY. 2013
www.acriche.com
23
Document No. : SSC-QP-7-07-24 (Rev.00)
Ambient Temperature vs Allowable Forward Current
1-4. Red, Amber (TJMAX = 145 ºC, at 350mA)
400
300
200
RjaT = 60oC/W
RjaT = 50oC/W
RjaT = 40oC/W
RjaT = 30oC/W
100
0
0
25
50
75
100
125
150
Ambient Temperature [oC]
1-5. Red, Amber
(TJMAX = 145 ºC, @700mA)
800
700
600
500
400
RjaT = 60oC/W
300
RjaT = 50oC/W
200
RjaT = 40oC/W
RjaT = 30oC/W
100
0
0
25
50
75
100
125
150
Ambient Temperature [oC]
Rev. 11
FEBRUARY. 2013
www.acriche.com
24
Document No. : SSC-QP-7-07-24 (Rev.00)
Typical Dome Type Radiation pattern
1. Pure White
0
1.0
0.8
0.6
0.4
0.2
0.0
30
60
90
-80
-60
-40
-20
0
Angle(deg.)
2. Warm White, Natural White
0
1.0
0.8
0.6
0.4
0.2
0.0
30
60
90
-80
-60
-40
-20
0
Angle(deg.)
Rev. 11
FEBRUARY. 2013
www.acriche.com
25
Document No. : SSC-QP-7-07-24 (Rev.00)
Typical Dome Type Radiation pattern
3. Blue(Royal Blue), Green
0
1.0
30
0.8
0.6
0.4
0.2
0.0
60
90
-80
-60
-40
-20
0
Angle(deg.)
4. Red, Amber
0
1.0
30
0.8
0.6
0.4
0.2
60
0.0
-80
90
-60
-40
-20
0
Angle(deg.)
Rev. 11
FEBRUARY. 2013
www.acriche.com
26
Document No. : SSC-QP-7-07-24 (Rev.00)
Recommended Solder pad
1. Solder pad
2. Solder paste pattern
Note :
1. All dimensions are in millimeters (tolerance : ±0.2 )
2. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 11
FEBRUARY. 2013
www.acriche.com
27
Document No. : SSC-QP-7-07-24 (Rev.00)
3. Reflow Soldering Conditions / Profile
Tm : Reflow machine setting temp (max 30 sec.)
Ts : Surface temp of PCB (max)
260
240
220
200
Ts : Surface temp of PCB (recommend)
Ts : Surface temp of PCB (min)
Cooling
-5 °C/sec
Rising
5 °C/sec
Pre-heating
180
150
0
Time
[Hr]
4. Hand Soldering conditions
Lead : Not more than 3 seconds @MAX280℃
Slug : Use a thermal-adhesives
* Caution
1. Reflow soldering should not be done more than one time.
2. Repairing should not be done after the LEDs have been soldered.
When repairing is unavoidable, suitable tools have to be used.
3. Die slug is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
Rev. 11
FEBRUARY. 2013
www.acriche.com
28
Document No. : SSC-QP-7-07-24 (Rev.00)
Emitter Type Reel Packaging
Note :
1. The number of loaded products in the reel is 500ea
2. All dimensions are in millimeters (tolerance : ±0.2 )
3. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 11
FEBRUARY. 2013
www.acriche.com
29
Document No. : SSC-QP-7-07-24 (Rev.00)
Packaging Structure
Aluminum Vinyl Bag
PART NO. : ######-##
QUANTITY : ***
LOT NUMBER : #######-#######
BIN CODE : #######
Outer Box
SIZE(mm)
TYPE
a
c
b
350 350 370
c
ZLED
PART : W42180-**
ZLED
PO CODE : ##
Q'YT : ######
LOT NO : YMDD-#####
DATE : ######
b
SEOUL SEMICONDUCTOR CO.,LTD
a
Note :
1. 6~10 reels are loaded in box
2. Scale none
3. For more information about binning and labeling, refer to the Application Note - 1
Rev. 11
FEBRUARY. 2013
www.acriche.com
30
Document No. : SSC-QP-7-07-24 (Rev.00)
precaution for use
• Storage
To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box
(or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30
degrees Centigrade. Humidity 50% maximum.
• Precaution after opening packaging
However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect
the light transmission efficiency, causing the light intensity to drop.
Attention in followed.
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40℃ Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
components should be dried for 10-12hr at 60±5℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Please avoid rapid cooling after soldering.
• Components should not be mounted on warped direction of PCB.
• Anti radioactive ray design is not considered for the products listed here in.
• Gallium arsenide is used in some of the products listed in this publication. These products are
dangerous if they are burned or shredded in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA(Isopropyl Alcohol) should be used.
• When the LEDs are illuminating, operating current should be decided after considering the
package maximum temperature.
• LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or
more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used
for storage.
• The appearance and specifications of the product may be modified for improvement without
notice.
• Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.
• The slug is connected to the anode. Therefore, we recommend to isolate the heat sink.
Rev. 11
• Attaching LEDs, don’t use adhesives to generate organic vapor.
FEBRUARY. 2013
www.acriche.com
31
Document No. : SSC-QP-7-07-24 (Rev.00)
Handling of Silicone resin LEDs
Z-Power LED is encapsulated by silicone resin for the highest flux efficiency.
Notes for handling of Silicone resin Z-Power LEDs
• Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers)
• Avoid leaving fingerprints on silicone resin parts.
• Dust sensitivity silicone resin need containers having cover for storage.
• When populating boards in SMT production, there are basically no restrictions
regarding the form of the pick and place nozzle, except that mechanical pressure on
the surface of the resin must be prevent.
• Please do not force over 2000 gf impact or pressure diagonally on the silicon lens.
It will cause fatal damage of this product
• Please do not recommend to cover the silicone resin of the LEDs with other resin
(epoxy, urethane, etc)
Rev. 11
FEBRUARY. 2013
www.acriche.com
32
Document No. : SSC-QP-7-07-24 (Rev.00)
相关型号：
©2020 ICPDF网 联系我们和版权申明