SGM2013-1.8XK3

更新时间:2024-09-18 05:39:38
品牌:SGMICRO
描述:300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators

SGM2013-1.8XK3 概述

300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 300mA,低功耗,低压差, 3 -Terminal ,线性稳压器

SGM2013-1.8XK3 数据手册

通过下载SGM2013-1.8XK3数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
300mA,Low Power,Low Dropout,  
3-Terminal,Linear Regulators  
SGM2013  
GENERAL DESCRIPTION  
FEATURES  
- Ultra-Low Dropout Voltage:  
The SGM2013 low-power, low-dropout, CMOS linear  
voltage regulators operate from a 2.5V to 5.5V input and  
300mV at 300mA output  
deliver up to 300mA. They are perfect choice for low voltage,  
low power applications. An ultra low ground current (200µA  
at 300mA output) makes them attractive for battery  
operated power systems. The SGM2013 series also offer  
ultra low dropout voltage (300mV at 300mA output) to  
prolong battery life in portable electronics  
- Low 77µA No-Load Supply Current  
- Low 200µA Operating Supply Current  
at 300mA Output  
- High PSRR  
- Thermal-Overload Protection  
- Output Current Limit  
- Output Voltage:  
The output voltage is preset to voltages in the range of 1.8V  
to 3.3V. Other features include foldback current limit and  
thermal shut-down protection.  
Available in Fixed Outputs 1.8V, 2.5V, 2.7V, 2.8V,  
2.9V, 3.0V and 3.3V  
SGM2013 come in 3-pin SOT23 and 3-pin SOT89 package.  
PIN CONFIGURATIONSTOP VIEW)  
APPLICATIONS  
Cellular Telephones  
Digital Cameras  
MP3MP4  
USB 2.0  
Modems  
PC Cameras  
1
2
GND  
OUT  
3
IN  
Hand-Held Instruments  
Electronic Dictionarys  
Portable/Battery-Powered Equipment  
SOT23-3  
GND  
IN  
TYPICAL OPERATION CIRCUIT  
1
2
3
1
2
3
OUT GND  
SOT89-3  
IN  
GND  
IN  
OUT  
SOT89-3(L-Type)  
INPUT  
OUTPUT  
IN  
OUT  
CIN  
1μF  
COUT  
1μF  
GND  
SG Microelectronics Co, Ltd  
Tel: 86/451/84348461  
www.sg-micro.com  
REV. C  
ORDERING INFORMATION  
SPECIFIED  
TEMPERATURE  
RANGE  
VOUT  
(V)  
PIN-  
PACKAGE  
ORDERING  
NUMBER  
PACKAGE  
MARKING  
PACKAGE  
OPTION  
MODEL  
SOT23-3  
SOT89-3  
SGM2013-1.8XN3/TR  
SGM2013-1.8XK3/TR  
XD18  
Tape and Reel, 3000  
SGM2013-1.8 1.8V  
SGM2013-2.5 2.5V  
SGM2013-2.7 2. 7V  
SGM2013-2.8 2.8V  
SGM2013-2.9 2.9V  
SGM2013-3.0 3.0V  
SGM2013-3.3 3.3V  
- 40°C to +125°C  
- 40°C to +125°C  
- 40°C to +125°C  
- 40°C to +125°C  
- 40°C to +125°C  
- 40°C to +125°C  
- 40°C to +125°C  
SGM2013-1.8XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-1.8XK3L/TR SGM2013-1.8XK3L Tape and Reel, 1000  
SGM2013-2.5XN3/TR  
SGM2013-2.5XK3/TR  
XD25  
Tape and Reel, 3000  
SOT89-3  
SGM2013-2.5XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-2.5XK3L/TR SGM2013-2.5XK3L Tape and Reel, 1000  
SGM2013-2. 7XN3/TR XD27  
Tape and Reel, 3000  
SOT89-3  
SGM2013-2. 7XK3/TR SGM2013-2. 7XK3 Tape and Reel, 1000  
SGM2013-2. 7XK3L/TR SGM2013-2. 7XK3L Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-2.8XN3/TR  
SGM2013-2.8XK3/TR  
XD28  
Tape and Reel, 3000  
SOT89-3  
SGM2013-2.8XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-2.8XK3L/TR SGM2013-2.8XK3L Tape and Reel, 1000  
SGM2013-2.9XN3/TR  
SGM2013-2.9XK3/TR  
XD29  
Tape and Reel, 3000  
SOT89-3  
SGM2013-2.9XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-2.9XK3L/TR SGM2013-2.9XK3L Tape and Reel, 1000  
SGM2013-3.0XN3/TR  
SGM2013-3.0XK3/TR  
XD30  
Tape and Reel, 3000  
SOT89-3  
SGM2013-3.0XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SOT23-3  
SGM2013-3.0XK3L/TR SGM2013-3.0XK3L Tape and Reel, 1000  
SGM2013-3.3XN3/TR  
SGM2013-3.3XK3/TR  
XD33  
Tape and Reel, 3000  
SOT89-3  
SGM2013-3.3XK3 Tape and Reel, 1000  
SOT89-3(L-Type)  
SGM2013-3.3XK3L/TR SGM2013-3.3XK3L Tape and Reel, 1000  
ABSOLUTE MAXIMUM RATINGS  
IN to GND.....................................................................- 0.3V to +6V  
Output Short-Circuit Duration............................................Infinite  
OUT to GND...................................................- 0.3V to (VIN + 0.3V)  
Power Dissipation, PD @ TA = 25  
SOT23-3 .....................................................................................0.4W  
SOT89-3 ................................................................................0.571W  
Package Thermal Resistance  
SOT89-3, θJA.........................................................................175°C/W  
Operating Temperature Range................. ..........- 40°C to +125°C  
Junction Temperature...........................................................+150°C  
Storage Temperature.............................................- 65°C to +150°C  
Lead Temperature (soldering, 10s).......................................260°C  
ESD Susceptibility  
HBM..........................................................................................4000V  
MM..............................................................................................400V  
SOT23-3, θJA....................................................................... 250/W  
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress  
ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational  
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect  
device reliability.  
PIN DESCRIPTION  
NAME  
IN  
GND  
OUT  
FUNCTION  
Regulator Input. Supply voltage can range from 2.5V to 5.5V.  
Ground.  
Regulator Output.  
SGM2013  
ELECTRICAL CHARACTERISTICS  
(VIN = VOUT (NOMINAL) + 0.5V (1), TA = - 40°C to +125°C, unless otherwise noted. Typical values are at TA = + 25°C.)  
PARAMETER  
Input Voltage  
SYMBOL  
CONDITIONS  
MIN  
TYP  
MAX  
UNITS  
VIN  
2.5  
5.5  
V
IOUT =1mA to 300mA, TA = +25°C  
VOUT + 0.5V≤VIN5.5V  
Output Voltage Accuracy(1)  
-3  
+3  
%
Maximum Output Current  
Current Limit  
300  
310  
mA  
mA  
ILIM  
IQ  
750  
77  
No load,  
145  
Ground Pin Current  
Dropout Voltage (2)  
µA  
mV  
%/V  
IOUT = 300mA,  
200  
0.8  
300  
IOUT = 1mA  
IOUT = 300mA  
380  
0.15  
VIN = 2.5V or (VOUT + 0.5V) to 5.5V,  
IOUT = 1mA  
Line Regulation(1)  
ΔVLNR  
ΔVLDR  
PSRR  
0.03  
Load Regulation  
IOUT = 0.1mA to 300mA, COUT = 1µF  
0.0008  
75  
0.002  
%/mA  
dB  
f = 100Hz,  
f = 1KHz,  
Power Supply Rejection Rate  
ILOAD = 50mA, COUT = 1µF  
53  
dB  
THERMAL PROTECTION  
Thermal Shutdown Temperature  
Thermal Shutdown Hysteresis  
TSHDN  
160  
15  
ΔTSHDN  
Specifications subject to change without notice.  
Note 1: VIN = VOUT(NOMINAL) + 0.5V or 2.5V, whichever is greater.  
Note 2: The dropout voltage is defined as VIN - VOUT, when VOUT is 100mV below the value of VOUT for VIN = VOUT + 0.5V. (Only applicable for  
V
OUT = +2.5V to +5.0V.)  
SGM2013  
TYPICAL OPERATING CHARACTERISTICS  
VIN = VOUT (NOMINAL) + 0.5V or 2.5V (whichever is greater), CIN = 1µF, COUT = 1µF, TA = +25, unless otherwise noted.  
Output Voltage vs.Load Current  
Output Voltage vs.Load Current  
3.4  
3.35  
3.3  
2.9  
2.85  
2.8  
2.75  
2.7  
3.25  
3.2  
VOUT =2.8V  
VOUT =3.3V  
0
100  
200  
300  
0
100  
200  
300  
Load Current(mA)  
Load Current(mA)  
Ground Pin Current vs.Load Current  
Ground Pin Current vs.Input Voltage  
VOUT =2.8V  
200  
190  
180  
170  
160  
150  
140  
130  
120  
110  
100  
90  
200  
160  
120  
80  
I
=50mA  
load  
VOUT =3.3V  
VOUT =2.8V  
No Load  
40  
80  
70  
0
0
100  
200  
300  
0
1
2
3
4
5
6
Load Current(mA)  
Input Voltage(V)  
Ground Pin Current vs.Input Voltage  
Output Voltage vs.Input Voltage  
No Load  
200  
160  
120  
80  
6
5
4
3
2
1
0
VOUT =3.3V  
I
=50mA  
load  
VOUT =3.3V  
No Load  
VOUT =2.8V  
40  
0
0
1
2
3
Input Voltage(V)  
4
5
6
0
1
2
3
4
5
6
Input Voltage(V)  
SGM2013  
TYPICAL OPERATING CHARACTERISTICS  
VIN = VOUT (NOMINAL) + 0.5V or 2.5V (whichever is greater), CIN = 1µF, COUT = 1µF, TA = +25, unless otherwise noted.  
Power-Supply Rejection Ratio  
vs.Frequency  
Current limit vs.Temperature  
90  
1000  
ILOAD =50mA  
80  
900  
800  
700  
600  
500  
400  
300  
200  
100  
VIN = VOUT+1V  
70  
60  
50  
40  
30  
20  
10  
0
VOUT = 3.3V  
COUT =10μF  
VOUT = 2.8V  
COUT =1μF  
0.01  
0.1  
1
10  
100  
1000  
-40 -20  
0
20 40 60 80 100 120 140  
Temperature(℃)  
Frequency(kHz)  
SGM2013  
TYPICAL OPERATING CHARACTERISTICS  
VIN = VOUT (NOMINAL) + 0.5V or 2.5V (whichever is greater), CIN = 1µF, COUT = 1µF, TA = +25, unless otherwise noted.  
Output Voltage vs.Temperature  
Output Voltage vs.Temperature  
2.9  
3.4  
ILOAD =150mA  
ILOAD =150mA  
2.85  
2.8  
3.35  
3.3  
2.75  
2.7  
3.25  
3.2  
VOUT =3.3V  
VOUT =2.8V  
-40 -20  
0
20 40 60 80 100 120 140  
Temperature(℃)  
-40 -20  
0
20 40 60 80 100 120 140  
Temperature(℃)  
Ground Pin Current vs.Temperature  
Dropout Voltage vs.Load Current  
260  
440  
240  
220  
200  
180  
160  
140  
120  
100  
80  
400  
360  
320  
280  
240  
200  
160  
120  
80  
TA = +125℃  
TA = +85℃  
VOUT =3.3V  
TA = +25℃  
TA = -40℃  
VOUT =2.8V  
ILOAD =150mA  
VOUT =2.8V  
40  
0
60  
0
30 60 90 120 150 180 210 240 270 300  
Load Current(mA)  
-40 -20  
0
20 40 60 80 100 120 140  
Temperature(℃)  
Dropout Voltage vs.Load Current  
360  
330  
300  
270  
240  
210  
180  
150  
120  
90  
TA = +125℃  
TA = +85℃  
TA = +25℃  
TA = -40℃  
60  
VOUT =3.3V  
30  
0
0
30 60 90 120 150 180 210 240 270 300  
Load Current(mA)  
SGM2013  
Application Notes  
When LDO is used in handheld products, Attention must be paid to voltage spike which would damage  
SGM2013. In such applications, voltage spike will be generated at changer interface and VBUS pin of USB  
interface when changer adapters and USB equipments are hot-inserted. Besides this, handheld products will  
be tested on the production line on the condition of no battery. Test Engineer will apply power from the  
connector pin which connects with positive pole of the battery. When external power supply is turned on  
suddenly, the voltage spike will be generated at the battery connector. The voltage spike will be very high, it  
always exceeds the absolute maximum input voltage (6.0V) of LDO. In order to get robust design. Design  
Engineer needs to clear up this voltage spike. Zener diode is a cheap and effective solution to eliminate such  
voltage spike. For example, BZM55B5V6 is a 5.6V small package Zener diode which can be used to  
remove voltage spike in cell phone design. The schematic is shown in below:  
Vcc  
IN  
VOUT  
VOUT  
Input  
SGM2013  
1uF  
C1  
C2  
4.7uF  
BZM55B5V6  
GND  
SGM2013  
PACKAGE OUTLINE DIMENSIONS  
SOT23-3  
D
θ
Dimensions  
Dimensions  
In Inches  
0.20  
0
b
Symbol In Millimeters  
Min  
1.050  
0.000  
1.050  
0.300  
Max  
1.250  
0.100  
1.150  
0.400  
Min  
0.041  
0.000  
0.041  
0.012  
Max  
0.049  
0.004  
0.045  
0.016  
A
A1  
A2  
b
c
D
E
E1  
e
0.100  
2.820  
1.500  
2.650  
0.200  
3.020  
1.700  
2.950  
0.004  
0.111  
0.059  
0.104  
0.008  
0.119  
0.067  
0.116  
e
C
e1  
0.950TYP  
0.037TYP  
e1  
L
1.800  
0.700REF  
2.000  
0.071  
0.028REF  
0.079  
L1  
θ
0.300  
0°  
0.600  
8°  
0.012  
0°  
0.024  
8°  
SGM2013  
PACKAGE OUTLINE DIMENSIONS  
SOT89-3  
D
D1  
Dimensions  
Dimensions  
In Inches  
A
Symbol  
In Millimeters  
Min  
1.400  
0.320  
0.360  
0.350  
4.400  
1.400  
2.300  
3.940  
Max  
1.600  
0.520  
0.560  
0.440  
4.600  
1.800  
2.600  
4.250  
Min  
0.055  
0.013  
0.014  
0.014  
0.173  
0.055  
0.091  
0.155  
Max  
0.063  
0.020  
0.022  
0.017  
0.181  
0.071  
0.102  
0.167  
A
b
b1  
c
D
D1  
E
E1  
e
e
1.500TYP  
0.060TYP  
b
e1  
L
2.900  
0.900  
3.100  
1.100  
0.114  
0.035  
0.122  
0.043  
c
e1  
SGM2013  
REVISION HISTORY  
Location  
Page  
12/06— Data Sheet changed from REV. A to REV. B  
Changed to ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Added Application Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
03/07— Data Sheet changed from REV. B to REV. C  
Changed to TYPICAL OPERATING CHARACTERISTICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Shengbang Microelectronics Co, Ltd  
Unit 3, ChuangYe Plaza  
No.5, TaiHu Northern Street, YingBin Road Centralized Industrial Park  
Harbin Development Zone  
Harbin, HeiLongJiang 150078  
P.R. China  
Tel.: 86-451-84348461  
Fax: 86-451-84308461  
www.sg-micro.com  
10  
SGM2013  

SGM2013-1.8XK3 相关器件

型号 制造商 描述 价格 文档
SGM2013-1.8XK3/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-1.8XK3L SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-1.8XK3L/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-1.8XN3/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5 SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5XK3 SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5XK3/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5XK3L SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5XK3L/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格
SGM2013-2.5XN3/TR SGMICRO 300mA, Low Power, Low Dropout, 3 -Terminal, Linear Regulators 获取价格

SGM2013-1.8XK3 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6