SGM4512 [SGMICRO]
Quad SPST CMOS Analog Switch;型号: | SGM4512 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | Quad SPST CMOS Analog Switch |
文件: | 总7页 (文件大小:430K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM4511/2
Quad SPST CMOS Analog Switches
GENERAL DESCRIPTION
FEATURES
The SGM4511 and SGM4512 are low cost, CMOS
monolithic, quad single-pole/single-throw (SPST)
analog switches. They operate from +4.5V to +40V
single power supply or ±4.5V to ±20V dual power
supplies.
● Single Supply Voltage Range: +4.5V to +40V
● Dual-Supply Voltage Range: ±4.5V to ±20V
● 1.8V Control Logic
● Low On-Resistance: 23Ω (TYP)
● Fast Switching Time:
t
t
ON = 40ns
The SGM4511 and SGM4512 are designed with
improved charge injection compensation to minimize
switching transients. Also, both of them have improved
continuous current rating of 30mA. In ON conditions,
both devices can provide true bidirectional performance.
In OFF condition, both devices can block the signal to
the supply level. These high performances make them
very suitable for general purpose switching applications
for industrial automation instrument communication
systems, portable equipment and etc.
OFF = 120ns
● Low Charge Injection: 18pC
● Simple Logic Interface
● Minimum Transients
● -40℃ to +85℃ Operating Temperature Range
● Available in Green SOIC-16 and TSSOP-16
Packages
APPLICATIONS
The SGM4511 and SGM4512 are available in Green
SOIC-16 and TSSOP-16 packages. They operate over
an ambient temperature range of -40℃ to +85℃.
Computer Peripheral Equipment
Disk Drives
Industrial Automation Instruments
Test Equipment
Sampling Hold Circuits
Communications Systems
Portable Equipment
SG Micro Corp
MAY 2015–REV. A
www.sg-micro.com
SGM4511/2
Quad SPST CMOS Analog Switches
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM4511YS16
XXXXX
SOIC-16
TSSOP-16
SOIC-16
SGM4511YS16G/TR
Tape and Reel, 2500
Tape and Reel, 4000
Tape and Reel, 2500
Tape and Reel, 4000
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
SGM4511
SGM4511
YTS16
XXXXX
SGM4511YTS16G/TR
SGM4512YS16G/TR
SGM4512YTS16G/TR
SGM4512YS16
XXXXX
SGM4512
SGM4512
YTS16
XXXXX
TSSOP-16
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to VEE
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
VCC ...............................................................................44V
GND .............................................................................25V
Digital Inputs (1), VS, VD
(VEE - 0.3V) to (VCC + 0.3V) or 30mA, whichever occurs first
Current (Any Terminal) .................................................30mA
Peak Current, SX or DX
ESD SENSITIVITY CAUTION
(Pulsed at 1ms, 10% Duty Cycle Max.) ......................100mA
Storage Temperature Range........................-65℃ to +150℃
Junction Temperature...................................................150℃
Lead Temperature (Soldering, 10s)..............................260℃
ESD Susceptibility
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................4000V
MM.................................................................................300V
NOTE:
1. Internal diodes will clamp any signals on Sx, Dx, or INx that
exceed VCC or VEE. Limit the current through the forward
diode to the maximum ratings.
DISCLAIMER
SG Micro Corp reserves the right to make any change in
RECOMMENDED OPERATING CONDITIONS
circuit design, or specifications without prior notice.
Operating Temperature Range.......................-40℃ to +85℃
SG Micro Corp
www.sg-micro.com
MAY 2015
2
SGM4511/2
Quad SPST CMOS Analog Switches
PIN CONFIGURATIONS
SGM4511/SGM4512
(TOP VIEW)
IN1
D1
1
2
3
4
5
6
7
8
16 IN2
15
14
D2
S2
S1
VEE
GND
S4
13 VCC
12 NC
11 S3
10 D3
D4
IN4
9
IN3
SOIC-16/TSSOP-16
SG Micro Corp
www.sg-micro.com
MAY 2015
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOIC-16
D
e
1.75
E1
E
5.60
0.65
1.27
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
b
c
θ
A1
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.750
0.250
1.550
0.510
0.250
MIN
MAX
0.069
0.010
0.061
0.020
0.010
0.402
0.157
0.244
A
A1
A2
b
1.350
0.100
1.350
0.330
0.170
9.800
3.800
5.800
0.053
0.004
0.053
0.013
0.006
0.386
0.150
0.228
c
D
E
10.200
4.000
6.200
E1
e
1.27 BSC
0.050 BSC
L
0.400
0°
1.270
8°
0.016
0°
0.050
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00012.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
TSSOP-16
D
E1
E
5.94
1.78
0.42
e
b
0.65
RECOMMENDED LAND PATTERN (Unit: mm)
L
A
A1
θ
H
c
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
MIN
MAX
0.047
0.006
0.041
0.012
0.008
0.201
0.177
0.260
A
A1
A2
b
1.200
0.150
1.050
0.300
0.200
5.100
4.500
6.600
0.050
0.800
0.190
0.090
4.860
4.300
6.200
0.002
0.031
0.007
0.004
0.191
0.169
0.244
c
D
E
E1
e
0.650 BSC
0.25 TYP
0.026 BSC
0.01 TYP
L
0.500
1°
0.700
7°
0.02
1°
0.028
7°
H
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00020.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SOIC-16
13″
13″
16.4
12.4
6.5
6.9
10.3
5.6
2.1
1.2
4.0
4.0
8.0
8.0
2.0
2.0
16.0
12.0
Q1
Q1
TSSOP-16
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
SGM4552
1-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications
SGMICRO
©2020 ICPDF网 联系我们和版权申明