SGM48760 [SGMICRO]
Single SPST Analog Switch;
| 型号： | SGM48760 |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | Single SPST Analog Switch |
| 文件： | 总7页 (文件大小：564K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM48760
Single SPST Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM48760 is a single SPST analog switch which is
designed for 1.65V to 5.5V VCC operation. The device
can support up to 5.5V bidirectional signal transmission.
It can be flexibly applied to digital and analog signal
processing systems.
● Supply Voltage Range: 1.65V to 5.5V
● Low On-Resistance: 4.5Ω (TYP) at VCC = 4.5V
● With No VCC Connected in the System, the
Control Pin can Accept Voltages up to 5.5V
● Propagation Delay Time, tPD:
0.65ns (TYP) at VCC = 3.3V
The SGM48760 is available in Green SC70-5 and
SOT-23-5 packages.
● Rail-to-Rail Input and Output Operation
● -40℃ to +125℃ Operating Temperature Range
● Available in Green SC70-5 and SOT-23-5 Packages
APPLICATIONS
ADC and DAC
Computer Peripherals
Portable Equipment
Sample-and-Hold Circuits
LOGIC DIAGRAM
A
C
B
Figure 1. Logic Diagram
SG Micro Corp
MARCH 2023 – REV. A
www.sg-micro.com
SGM48760
Single SPST Analog Switch
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SC70-5
SGM48760XC5G/TR
SGM48760XN5G/TR
048XX
049XX
Tape and Reel, 3000
Tape and Reel, 3000
-40℃ to +125℃
-40℃ to +125℃
SGM48760
SOT-23-5
MARKING INFORMATION
NOTE: XX = Date Code.
SC70-5/SOT-23-5
YYY X X
Date Code - Week
Date Code - Year
Serial Number
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VCC (1) ...................................... -0.5V to 6.5V
Control Input Voltage, VIN (1) (2) .......................... -0.5V to 6.5V
Switch I/O Voltage, VI/O (1) (2) (3) .............. -0.5V to (VCC + 0.5V)
Control Input Clamp Current, IIK, VIN < 0V ....................-50mA
I/O Port Diode Current, II/OK, VI/O < 0V .........................-50mA
On-State Switch Current, IT, VI/O = 0V to VCC..............±50mA
Junction Temperature.................................................+150℃
Storage Temperature Range.......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
HBM.............................................................................7000V
CDM ............................................................................1000V
RECOMMENDED OPERATING CONDITIONS
Supply Voltage, VCC..........................................1.65V to 5.5V
I/O Port Voltage, VI/O............................................... 0V to VCC
Control Input Voltage, VIN ......................................0V to 5.5V
Input Transition Rise or Fall Time, Δt/ΔV
DISCLAIMER
SG Micro Corp reserves the right to make any change in
V
CC = 1.65V to 1.95V.................................................. 20ns/V
VCC = 2.3V to 2.7V...................................................... 20ns/V
VCC = 3.0V to 3.6V...................................................... 10ns/V
circuit design, or specifications without prior notice.
VCC = 4.5V to 5.5V...................................................... 10ns/V
Operating Temperature Range, TA ..............-40℃ to +125℃
NOTES:
1. All voltages reference ground, unless otherwise noted.
2. If the input and output clamp-current ratings are observed,
the input and output negative voltage ratings may be
exceeded.
3. The maximum value is 6.5V.
SG Micro Corp
www.sg-micro.com
MARCH 2023
2
SGM48760
Single SPST Analog Switch
PIN CONFIGURATIONS
(TOP VIEW)
A
B
1
2
3
5
4
VCC
GND
C
SC70-5/SOT-23-5
PIN DESCRIPTION
PIN
1
NAME
A
I/O
FUNCTION
I/O
I/O
－
I
Analog Switch A Input/Output Port.
Analog Switch B Input/Output Port.
Ground Pin.
2
B
3
GND
C
4
Control Signal Input Port of Switch (L = OFF, H = ON).
Power Supply Input Pin.
5
VCC
－
FUNCTION TABLE
CONTROL INPUT (C)
SWITCH
OFF
L
H
ON
SG Micro Corp
www.sg-micro.com
MARCH 2023
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SC70-5
D
e1
0.65
e
1.9
E1
E
0.75
b
0.4
1.3
RECOMMENDED LAND PATTERN (Unit: mm)
L
L1
A
A1
A2
c
θ
0.20
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.100
0.100
1.000
0.350
0.220
2.200
1.350
2.450
MIN
MAX
A
A1
A2
b
0.800
0.000
0.800
0.150
0.080
2.000
1.150
2.150
0.031
0.000
0.031
0.006
0.003
0.079
0.045
0.085
0.043
0.004
0.039
0.014
0.009
0.087
0.053
0.096
c
D
E
E1
e
0.65 TYP
1.300 BSC
0.525 REF
0.026 TYP
0.051 BSC
0.021 REF
e1
L
L1
θ
0.260
0°
0.460
8°
0.010
0°
0.018
8°
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00043.001
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
SOT-23-5
1.90
D
e1
2.59
E1
E
0.99
b
e
0.95
0.69
RECOMMENDED LAND PATTERN (Unit: mm)
L
A2
A
ccc
C
SEATING PLANE
A1
θ
c
C
0.25
Dimensions In Millimeters
Symbol
MIN
MOD
MAX
1.450
0.150
1.300
0.500
0.220
3.050
1.750
3.000
A
A1
A2
b
-
-
0.000
0.900
0.300
0.080
2.750
1.450
2.600
-
-
-
c
-
D
-
E
-
E1
e
-
0.950 BSC
e1
L
1.900 BSC
0.300
0°
-
-
0.600
8°
θ
ccc
0.100
NOTES:
1. This drawing is subject to change without notice.
2. The dimensions do not include mold flashes, protrusions or gate burrs.
3. Reference JEDEC MO-178.
SG Micro Corp
TX00033.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
SC70-5
7″
7″
9.5
9.5
2.40
3.20
2.50
3.20
1.20
1.40
4.0
4.0
4.0
4.0
2.0
2.0
8.0
8.0
Q3
Q3
SOT-23-5
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
7″
368
442
227
410
224
224
8
18
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
©2020 ICPDF网 联系我们和版权申明