SGM7229 [SGMICRO]
High-Speed USB 2.0 (480Mbps) DPDT Analog Switch;型号: | SGM7229 |
厂家: | Shengbang Microelectronics Co, Ltd |
描述: | High-Speed USB 2.0 (480Mbps) DPDT Analog Switch 光电二极管 |
文件: | 总7页 (文件大小:538K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SGM7229
High-Speed USB 2.0 (480Mbps)
DPDT Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM7229 is a DPDT (double-pole/double-throw)
analog switch. It operates from a 1.8V to 5.5V single
power supply. Each switch of the SGM7229 is
bidirectional, which can ensure that the high speed
signals have little or no attenuation at the outputs.
● Single Supply Voltage Range: 1.8V to 5.5V
● On-Resistance: 6Ω (TYP) at 3V
● High Off-Isolation: -26dB (RL = 50Ω, f = 250MHz)
● Low Crosstalk: -20dB (RL = 50Ω, f = 250MHz)
● -3dB Bandwidth: 850MHz
● Fast Switching Times at VCC = 3.3V:
tON = 30ns
The SGM7229 features high speed, low bit-to-bit skew
and wide bandwidth. These high performances make it
very suitable for multiple applications, such as cellular
phones and computer peripherals, etc.
tOFF = 18ns
● Break-Before-Make Switching
● Rail-to-Rail Input and Output Operation
● Power-Off and Power-On Protections
● -40℃ to +85℃ Operating Temperature Range
● Available in Green UTQFN-1.8×1.4-10L and
MSOP-10 Packages
The SGM7229 has power-off and power-on protections.
Because of the special circuitry on the D+/D- pins, the
device will not be damaged even if VBUS short-circuit
occurs during data transmission. In addition, it can
prevent accidental from leaking and ensure system
reliability under power-down and over-voltage conditions.
The SGM7229 is available in Green MSOP-10 and
UTQFN-1.8×1.4-10L packages. It operates over an
ambient temperature range of -40℃ to +85℃.
APPLICATIONS
Cellular Phones
Digital Cameras
Portable Equipment
Computer Peripherals
Battery-Powered Systems
Routes Signals for USB 2.0 Full-Speed
SG Micro Corp
DECEMBER 2021 – REV. B
www.sg-micro.com
High-Speed USB 2.0 (480Mbps)
DPDT Analog Switch
SGM7229
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
UTQFN-1.8×1.4-10L
MSOP-10
SGM7229YUWQ10G/TR
NDXX
Tape and Reel, 3000
Tape and Reel, 4000
-40℃ to +85℃
-40℃ to +85℃
SGM7229
SGM7229
YMS10
XXXXX
SGM7229YMS10G/TR
MARKING INFORMATION
NOTE: XX = Date Code. XXXXX = Date Code, Trace Code and Vendor Code.
UTQFN-1.8×1.4-10L
MSOP-10
YY X X
X X X X X
Date Code - Week
Vendor Code
Date Code - Year
Serial Number
Trace Code
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
VCC to GND...............................................................0V to 6V
Analog, Digital Voltage Range................ -0.3V to VCC + 0.3V
Continuous Current HSDn or Dn ................................±50mA
Peak Current HSDn or Dn ........................................±100mA
Junction Temperature.................................................+150℃
Storage Temperature Range .......................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
HBM.............................................................................2500V
MM.................................................................................400V
CDM ............................................................................1000V
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
RECOMMENDED OPERATING CONDITIONS
Operating Temperature Range.......................-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
DECEMBER 2021
2
High-Speed USB 2.0 (480Mbps)
DPDT Analog Switch
SGM7229
PIN CONFIGURATIONS
(TOP VIEW)
(TOP VIEW)
HSD2+ HSD2-
1
2
3
4
5
10
9
VCC
OE
6
7
HSD2+
HSD2-
HSD1+
HSD1-
S
D+
5
4
3
OE
8
9
HSD1+
HSD1-
GND
VCC
8
10
S
D-
7
1
2
6
GND
D+
D-
UTQFN-1.8×1.4-10L
MSOP-10
PIN DESCRIPTION
PIN
NAME
FUNCTION
MSOP-10
UTQFN-1.8×1.4-10L
1
2
3
4
D+
USB Data Bus.
USB Data Bus.
Ground.
D-
3
5
GND
4
6
HSD1-
HSD1+
HSD2-
HSD2+
Multiplexed Source Input.
Multiplexed Source Input.
Multiplexed Source Input.
Multiplexed Source Input.
Output Enable Control Pin.
Positive Power Supply Pin.
Select Input Pin.
5
7
6
8
7
9
8
10
1
OE
VCC
S
9
10
2
SG Micro Corp
www.sg-micro.com
DECEMBER 2021
3
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-10
b
E1
E
4.8
1.02
0.3
e
0.5
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
A1
c
θ
A2
Dimensions
In Millimeters
Dimensions
In Inches
Symbol
MIN
MAX
1.100
0.150
0.950
0.280
0.230
3.100
3.100
5.050
MIN
MAX
0.043
0.006
0.037
0.011
0.009
0.122
0.122
0.199
A
A1
A2
b
0.820
0.020
0.750
0.180
0.090
2.900
2.900
4.750
0.032
0.001
0.030
0.007
0.004
0.114
0.114
0.187
c
D
E
E1
e
0.500 BSC
0.020 BSC
L
0.400
0°
0.800
6°
0.016
0°
0.031
6°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00015.000
www.sg-micro.com
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
UTQFN-1.8×1.4-10L
NOTES:
1. All linear dimensions are in millimeters.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00091.000
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
UTQFN-1.8×1.4-10L
MSOP-10
7″
9.0
1.75
5.20
2.10
3.30
0.70
1.20
4.0
4.0
4.0
8.0
2.0
2.0
8.0
Q1
Q1
13″
12.4
12.0
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
7″ (Option)
368
442
386
227
410
280
224
224
370
8
18
5
7″
13″
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号:
©2020 ICPDF网 联系我们和版权申明