SGM9128YP(EOL) [SGMICRO]
4-Channel, 6th-Order Video Filter Driver for SD/HD (1080i);
| 型号： | SGM9128YP(EOL) |
| 厂家： | 
Shengbang Microelectronics Co, Ltd |
| 描述： | 4-Channel, 6th-Order Video Filter Driver for SD/HD (1080i) |
| 文件： | 总9页 (文件大小：716K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SGM9128YP
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
GENERAL DESCRIPTION
FEATURES
The SGM9128YP is a 4-channel, 5th-order output
reconstruction filter which can operate from 3.1V to
5.5V single power supply. It is designed to replace
passive LC filters and drivers with an integrated device.
Compared with typical passive solutions, the four
6th-order Butterworth filters provide better image
quality than typical passive solutions. One channel is
Standard Definition (SD) filter while the rest three
channels are High Definition (HDi) filters.
● Supply Voltage Range: 3.1V to 5.5V
● Three 6th-Order High Definition Filters
● One 6th-Order Standard Definition Filter
● Internal Gain: 6dB
● Clamp Mode Active with AC-Coupled Inputs
● Clamp Mode Inactive with DC-Coupled Inputs
● AC- or DC-Coupled Outputs
● DC-Coupled Outputs Eliminate AC-Coupled
Capacitors
● -40℃ to +85℃ Operating Temperature Range
● Available in a Green MSOP-10 (Exposed Pad)
Package
The device has a 6dB gain, allowing DC- or
AC-coupled output. SGM9128YP can be DC-coupled
or AC-coupled with input video signal to eliminate
out-of-band noise, such as the output stage of DAC.
Internal clamp circuitry may be used if AC-coupled
inputs are required.
APPLICATIONS
Video on Demand (VOD)
SGM9128YP is available in a Green MSOP-10
(Exposed Pad) package. It operates over an ambient
temperature range of -40℃ to +85℃.
Set-Top Boxes
Personal Video Recorders (PVR)
TVs
BLOCK DIAGRAM
Clamp
SD IN
6dB
SD OUT
SD, 6th-Order
Clamp
Clamp
Clamp
6dB
6dB
6dB
HD IN1
HD OUT1
HD OUT2
HD OUT3
HD IN2
HD IN3
HDi, 6th-Order
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012 –REV. A. 2
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
SGM9128YP
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
SGM9128
YPMS10
XXXXX
MSOP-10
(Exposed Pad)
SGM9128YP
SGM9128YPMS10G/TR
Tape and Reel, 3000
-40℃ to +85℃
MARKING INFORMATION
NOTE: XXXXX = Date Code and Vendor Code.
X X X X X
Vendor Code
Date Code - Week
Date Code - Year
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
Analog and Digital Input/Output Voltage
OVERSTRESS CAUTION
......................................................GND - 0.3V to VCC + 0.3V
DC Supply Voltage, VCC................................................. 6.0V
Junction Temperature ..................................................150℃
Storage Temperature Range........................ -65℃ to +150℃
Lead Temperature (Soldering, 10s) .............................260℃
ESD Susceptibility
Stresses beyond those listed in Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods
may affect reliability. Functional operation of the device at any
conditions beyond those indicated in the Recommended
Operating Conditions section is not implied.
HBM............................................................................ 8000V
MM................................................................................ 400V
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged if ESD protections are
not considered carefully. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failureto observe proper handlingand installation procedures
can cause damage. ESD damage can range from subtle
performance degradation tocomplete device failure. Precision
integrated circuits may be more susceptible to damage
because even small parametric changes could cause the
device not to meet the published specifications.
RECOMMENDED OPERATING CONDITIONS
Operating Voltage Range...................................3.1V to 5.5V
Operating Temperature Range ...................... -40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, or specifications without prior notice.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
2
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
SGM9128YP
PIN CONFIGURATION
(TOP VIEW)
SD IN 1
10 SD OUT
VCC
HD IN1
HD IN2
HD IN3
GND
2
3
4
5
9
8
7
6
Exposed
Pad
HD OUT1
HD OUT2
HD OUT3
MSOP-10 (Exposed Pad)
PIN DESCRIPTION
PIN
NAME
SD IN
FUNCTION
1
SD Video Input.
2
VCC
Power Supply.
3
HD IN1
HD IN2
HD IN3
HD OUT3
HD OUT2
HD OUT1
GND
HD Video Input for Channel 1.
HD Video Input for Channel 2.
HD Video Input for Channel 3.
Filtered HD Video Output for Channel 3.
Filtered HD Video Output for Channel 2.
Filtered HD Video Output for Channel 1.
Ground.
4
5
6
7
8
9
10
SD OUT
—
Filtered SD Video Output.
Exposed Pad
Exposed Pad. Can only be connected to GND or left floating.
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
3
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
SGM9128YP
ELECTRICAL CHARACTERISTICS
(TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.)
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
DC Electrical Characteristics
Operating Voltage Range (VCC
)
3.1
5
5.5
84
V
Quiescent Current (IQ)
VCC = 5.0V, No load
65
mA
Output Level Shift Voltage (VOLS
Voltage Gain (AV)
)
VIN = 0V, No load
550
6.1
4.8
1.4
50
760
mV
dB
V
RL = 150Ω
5.8
6.35
Output Voltage High Swing
Video Input Voltage Range
VIN = 3V, RL = 150Ω to GND
Referenced to GND if DC-coupled
DC (All channels)
VPP
dB
Power Supply Rejection Ratio (PSRR)
Standard Definition Electrical Characteristics
-0.1dB Bandwidth
-1dB Bandwidth
SD channel
6.4
7.6
MHz
MHz
MHz
dB
SD channel
-3dB Bandwidth
SD channel
8.5
Filter Response (Normalized Gain)
Slew Rate
SD channel, fIN = 400kHz to 27MHz
2V Output step, 80% to 20%
AC-AC coupled, PAL/NTSC
AC-DC coupled, PAL/NTSC
AC-AC coupled, PAL/NTSC
AC-DC coupled, PAL/NTSC
Difference between 400kHz and 6.5MHz
VOUT = 1.4VPP, f = 1MHz
50
34
V/μs
0.9/0.5
0.5/0.35
1/0.7
0.7/0.6
30
Differential Gain (DG)
Differential Phase (DP)
%
deg
Group Delay Variation (D/DT)
Crosstalk (channel-to-channel)
Signal-to-Noise Ratio (SNR)
Fall Time
ns
dB
dB
ns
ns
%
-61
NTC-7 weighting, 100kHz to 5MHz
2V Output step, 80% to 20%
2V Output step, 80% to 20%
f = 3.58MHz (Referenced to SDIN at 400kHz)
f = 3.58MHz (Referenced to SDIN at 400kHz)
75
34
Rise Time
36
Chroma Luma Gain (CLGSD
Chroma Luma Delay (CLDSD
1080i High Definition Electrical Characteristics
)
102
8
)
ns
-0.1dB Bandwidth
-1dB Bandwidth
RL = 150Ω
32
39
MHz
MHz
RL = 150Ω
-3dB Bandwidth
RL = 150Ω
46
23
MHz
dB
Filter Response (Normalized Gain)
Slew Rate
fIN = 400kHz to 74.25MHz
2V Output step, 80% to 20%
Difference between 400kHz and 26MHz
VOUT = 1.4VPP, f = 1MHz
2V Output step, 80% to 20%
2V Output step, 80% to 20%
190
2.5
-60
6.2
6.2
V/μs
ns
Group Delay Variation (D/DT)
Crosstalk (channel-to-channel)
Fall Time
dB
ns
Rise Time
ns
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
4
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
SGM9128YP
TYPICAL PERFORMANCE CHARACTERISTICS
TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.
SD Gain vs. Frequency
HD Gain vs. Frequency
3
0
3
0
-3
-3
-6
-6
-9
-9
-12
-15
-12
-15
0.1
1
10
100
1000
1000
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
SD Group Delay vs. Frequency
HD Group Delay vs. Frequency
40
200
150
100
50
30
20
10
0
0
-10
-20
-50
0.1
1
10
100
0.1
1
10
100
1000
Frequency (MHz)
Frequency (MHz)
SD Phase vs. Frequency
HD Phase vs. Frequency
270
180
90
270
180
90
0
0
-90
-180
-270
-90
-180
-270
0.1
1
10
100
1000
0.1
1
10
100
Frequency (MHz)
Frequency (MHz)
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
5
4-Channel, 6th-Order Video
Filter Driver for SD/HD (1080i)
SGM9128YP
TYPICAL PERFORMANCE CHARACTERISTICS (continued)
TA = +25℃, VIN = 1VPP, VCC = 5V, RSOURCE = 37.5Ω; all inputs are AC-coupled with 0.1µF; all outputs are AC-coupled with 220µF
into 150Ω, referenced to 400kHz, unless otherwise noted.
SD Small Signal Step Response
VIN = 0.1VPP
HD Small Signal Step Response
VIN = 0.1VPP
0.15
0.10
0.15
0.10
0.05
0.05
0.00
0.00
-0.05
-0.10
-0.15
-0.05
-0.10
-0.15
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
Time (μs)
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
Time (μs)
SD Large Signal Step Response
HD Large Signal Step Response
1.50
1.00
1.50
1.00
0.50
0.50
0.00
0.00
-0.50
-1.00
-1.50
-0.50
-1.00
-1.50
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
Time (µs)
-0.2 -0.1
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7
Time (μs)
SG Micro Corp
www.sg-micro.com
NOVEMBER 2012
6
PACKAGE INFORMATION
PACKAGE OUTLINE DIMENSIONS
MSOP-10 (Exposed Pad)
D1
2.06
E1
E
E2
1.59 4.8
1.02
0.3
b
e
0.5
RECOMMENDED LAND PATTERN (Unit: mm)
D
L
A
A1
c
θ
A2
Dimensions In Millimeters
Symbol
MIN
MOD
MAX
1.100
0.150
0.950
0.280
0.230
3.100
2.416
3.100
5.050
1.730
A
A1
A2
b
0.820
0.020
0.750
0.170
0.080
2.900
1.700
2.900
4.750
1.450
-
-
-
-
c
-
D
-
D1
E
-
-
E1
E2
e
-
-
0.500 BSC
L
0.400
0°
-
-
0.800
8°
θ
NOTES:
1. Body dimensions do not include mode flash or protrusion.
2. This drawing is subject to change without notice.
SG Micro Corp
TX00017.001
www.sg-micro.com
PACKAGE INFORMATION
TAPE AND REEL INFORMATION
REEL DIMENSIONS
TAPE DIMENSIONS
P2
P0
W
Q2
Q4
Q2
Q4
Q2
Q4
Q1
Q3
Q1
Q3
Q1
Q3
B0
Reel Diameter
P1
A0
K0
Reel Width (W1)
DIRECTION OF FEED
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF TAPE AND REEL
Reel Width
Reel
Diameter
A0
B0
K0
P0
P1
P2
W
Pin1
Package Type
W1
(mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm) Quadrant
MSOP-10
(Exposed Pad)
13″
12.4
5.20
3.30
1.20
4.0
8.0
2.0
12.0
Q1
SG Micro Corp
TX10000.000
www.sg-micro.com
PACKAGE INFORMATION
CARTON BOX DIMENSIONS
NOTE: The picture is only for reference. Please make the object as the standard.
KEY PARAMETER LIST OF CARTON BOX
Length
(mm)
Width
(mm)
Height
(mm)
Reel Type
Pizza/Carton
13″
386
280
370
5
SG Micro Corp
www.sg-micro.com
TX20000.000
相关型号：
©2020 ICPDF网 联系我们和版权申明