GL9E56M [SHARP]
Smart/Normal 7 Seg Numeric LED Display, Yellow Green, 14.22mm,;
| 型号： | GL9E56M |
| 厂家： | 
SHARP ELECTRIONIC COMPONENTS |
| 描述： | Smart/Normal 7 Seg Numeric LED Display, Yellow Green, 14.22mm, 光电 |
| 文件： | 总16页 (文件大小：411K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Numeric LED
■ General Description
Sharp can supply wide color line-up for numeric LEDs-GaAlAs on GaAlAs
(double hetero) super-luminosity U series (red), S series (sunset orange), K
series (green). In addition to them, dichromatic type has realized an expressive
display, changing the emission color according to display contents.
Sharp can also supply various character height (7.62mm to 38.1mm), and
various digits type (1digit to 5digits) for your applications.
GL3T508D
GL3E305
GL3H412
GL6S220
GL9D030
GL9H040
GL8T156
Numbering system
1-digit
Multi-digits
GL
GL
eCharacter size
wRadiation color
qType: internal connection
eSerial No.
rNo. of digits
wRadiation color
qType: internal connection
qType: internal connection
wRadiation color
eCharacter size
rNo. of digits
Multi-digits Dynamic drive circuit
3
6
7
8
9
2-digits
Series Radiation color
03,030
04,040
156
56
08
100
15
8.0mm
2
3
4
5
Multi-digits Cathode common
Multi-digits Anode common
1-digit Cathode common
1-digit Anode common
3-digits
4-digits
5-digits
P
U
T
D
S
H
E
K
Red
10.16mm
14.12mm
14.22mm
20.32mm
25.4mm
Red(Super-luminosity)
Red(High-luminosity)
Red
Sunset orange
Yellow
38.1mm
Yellow-green
Green
ED Yellow-green+Red
ET Yellow-green+Red(High-luminosity
)
■ Structure
Numeric LEDs are classified into 2 types ; substrate type and mold type as shown below.
Substrate type employs thin package and can save the mount space. Mold type has realized
high reliability because it is molded by resin.
Mold Type
Substrate Type
Reflective case
Scattering sheet
Reflective case
Epoxy resin
Lead frame
Substrate
Lead pin
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
169
Internet
Surface Mount Type Numeric LED
■ General Description
Sharp's GL8D03M series, GL8D04M series, GL8D56M series are 1-digit, thin
package surface mount type numeric LEDs. (character height: 8.0/10.16/14.22
mm). It is unnecessary to adjust the mounting height because the thickness of
each series is the same. They are suited for measuring equipment and various
thin type display systems.
GL9D04M
■ Model Line-up
Character
height
(mm)
Radiation
color
Common
D
Red
E
Outline Dimensions
Type
Yellow-green
Page
180
Figure
1
Anode
Cathode
Anode
Cathode
Anode
GL9D03M
GL8D03M
GL9D04M
GL8D04M
GL9D56M
GL8D56M
GL9E03M
GL8E03M
GL9E04M
GL8E04M
GL9E56M
GL8E56M
8.0
Mold
type
10.16
14.22
180
180
2
3
Cathode
■ Absolute Maximum Ratings (Figures shown below are values per segment.)
(Ta=25˚C)
Peak forward current*1
Forward current
Reverse voltage Operating temperature
Storage temperature
Derating factor
Model No.
IF
(mA)
15
20
15
20
15
20
VR
(V)
5
5
5
5
5
5
Topr
(˚C)
Tstg
(˚C)
IFM
(mA)
50
50
50
50
50
50
DC
(mA/˚C)
1.91
2.54
1.91
2.54
1.91
2.54
Pulse
(mA/˚C)
6.36
6.36
6.36
6.36
6.36
6.36
GL9E03M/GL8E03M
GL9D03M/GL8D03M
GL9E04M/GL8E04M
GL9D04M/GL8D04M
GL9E56M/GL8E56M
GL9D56M/GL8D56M
Yellow-green
Red
Yellow-green
Red
Yellow-green
Red
-30 to +70
-30 to +70
-30 to +70
-40 to +80
-40 to +80
-40 to +80
*1 Duty ratio=1/10, pulse width=0.1ms
■ Electro-optical Characteristics (Figures shown below are values per segment.)
(Ta=25˚C)
Forward current Luminous intensity
Peak emission wavelength
Spectrum radiation bandwidth
Reverse current
IR (µA)
VF (V)
Model No.
IV (mcd)
TYP.
2.5
λp (nm)
TYP.
565
635
565
∆λ (nm)
TYP.
30
35
30
IF
(mA)
10
10
10
VR
(V)
4
4
4
4
4
4
TYP.
MAX.
2.5
MAX.
10
10
GL9E03M/GL8E03M
GL9D03M/GL8D03M
GL9E04M/GL8E04M
GL9D04M/GL8D04M
GL9E56M/GL8E56M
GL9D56M/GL8D56M
Yellow-green
Red
Yellow-green
Red
Yellow-green
Red
2.0
1.85
2.0
2.3
2.3
2.5
3.0
10
1.85
2.0
1.85
2.3
2.5
2.3
3.0
4.0
4.0
635
565
635
35
30
35
10
10
10
10
10
10
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
170
Internet
Dichromatic Numeric LED
■ General Description
Sharp's dichromatic numeric LEDs GL9ED08 series, GL8ED100 series are 1-digit
large size numeric LEDs(character height: 20.32/25.4mm). They have realized
expressive display, changing the radiation color according to display type.
They are suited for measuring equipment, amusement equipment, and various
displays.
GL8ED100
■ Model Line-up
Radiation color
E D
E T
Outline dimensions
Character height
Type
(mm)
Yellow-green+Red
Yellow-green+Red(High-luminosity)
common
Page
181
Figure
8
20.32
25.40
Anode
Anode
Cathode
GL9ED08
GL9ED100
GL8ED100
Mold
type
GL9ET100
GL8ET100
180
6
■ Absolute Maximum Ratings (Figures shown below are values per segment.)
Derating factor
(Ta=25˚C)
Forward current
Peak forward current*1
Reverse voltage
Operating temperature
Storage temperature
Model No.
IF
IFM
DC
Pulse
VR
T
opr.
T
stg.
(mA)
(mA)
(mA/˚C)
(mA/˚C)
(V)
(˚C)
(˚C)
GL9ED08
Yellow-green
Yellow-green
Red
Yellow-green
Red(High-luminosity)
20
20
20
20
50
50
50
50
0.36
0.36
0.36
0.36
0.91
0.91
0.91
0.91
1.82
5
6
6
6
-30 to +70
-40 to +80
GL8ED100
GL9ED100
GL8ET100
GL9ET100
-30 to +70
-40 to +80
-40 to +80
-30 to +70
20
100
0.36
6
*1 Duty ratio=1/10, Pulse width=0.1ms
■ Electro-optical Characteristics (Figures shown below are values per segment.)
(Ta=25˚C)
Forward current
(V)
MAX.
Luminous intensity
Peak emission wavelength
λp(nm)
Spectrum radiation bandwidth
∆λ(nm)
Reverse current
Model No.
V
TYP.
F
IV(mcd)
IR(µA)
MAX.
I
F
V
(V)
R
TYP.
TYP.
TYP.
(mA)
GL9ED08
Yellow-green
Yellow-green
Red
Yellow-green
Red(High-luminosity)
2.0
4.0
3.7
4.0
3.4
2.5
5.0
5.0
5.0
4.4
3.0
3.5
3.5
3.5
565
565
635
565
660
30
30
35
30
20
10
10
10
10
10
10
10
10
10
4
5
5
5
GL8ED100
GL9ED100
GL8ET100
GL9ET100
4.8
10
5
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
171
Internet
Super-luminosity/High-luminosity Numeric LED
■ Super-luminosity/High-luminosity Numeric LED Figures shown below are values per segment.
(Ta=25˚C)
U (Red)
Luminous intensity
T (Red)
Character
height
(mm)
Luminous intensity
(mcd)
Outline dimensions
Digit Type
Type of display
Model No.
Model No.
(mcd)
TYP.
TYP.
4.0
4.0
4.25
4.25
5.25
5.25
2.2
Page
Figure
11
A
K
A
K
A
K
A
K
A
K
GL9T030
GL8T030
GL9T040
GL8T040
GL9T156
GL8T156
GL9T08
8.0
10.16
14.12
20.32
25.4
38.1
10.16
8.0
10
9
181
7
GL8T08
2.2
GL9U100
GL9U15
35.0
27.0
GL9T100
GL8T100
9.5
9.5
5
180
4
A
A
K
A
K
A
K
GL7T201
GL6T201
GL3T422
GL3T421
GL3T508D
GL3T507D
4.25
4.25
1.5
1.5
1.5
13
18
20
182
183
7.6
1.5
*1 A: Anode common K: Cathode common * Production after order confirmation
* As for current conditions, refer to IF in electro-optical characteristics.
■ Absolute Maximum Ratings Figures shown below are values per segment.
(Ta=25˚C)
Forward current
Peak forward current
Derating factor
(mA/ ˚C)
Reverse voltage
Operating temperature
Storage temperature
Radiation
color
Character height
(mm)
*1
IF
(mA)
20
20
20
IFM
VR
(V)
5
6
5
Topr.
(˚C)
-30 to +70
-30 to +70
-30 to +70
Tstg.
(˚C)
-40 to +80
-40 to +80
-40 to +80
(mA)
DC
Pulse
1.82
2.73
1.82
8.0/10.16/14.12/20.32
25.4, 38.1
T
U
T
100
0.36
0.36
0.36
150*2
100
25.4, 38.1
*1 Duty ratio=1/10, Pulse width=0.1ms
*2 U type duty ratio=1/16, pulse width=0.1ms
■ Electro-optical Characteristics Figures shown below are values per segment.
(Ta=25˚C)
Forward current
VF
TYP.
Peak emission wavelength
λp(nm)
Spectrum radiation bandwidth
∆λ(nm)
Reverse current
IR(µA)
Radiation
color
Character height
(mm)
IF
(mA)
10
10
10
VR
(V)
4
5
4
MAX
2.2
4.8
TYP.
TYP.
MAX.
8.0/10.16/14.12/20.32
25.4, 38.1
T
U
T
1.7
3.5
3.4
660
660
660
20
20
20
10
100
10
25.4, 38.1
4.4
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
172
Internet
Numeric LED
■ 1-digit
Radiation color
Outline dimensions
Character
height
(mm)
P
D
S
H
E
K
Type
Type of display
Red
Red
Sunset orange
Yellow
Yellow-green
Green
Page
181
180
Figure
GL9P030
GL8P030
GL9P040
GL8P040
GL9P156
GL8P156
GL9D030
GL8D030
GL9D040
GL8D040
GL9D156
GL8D156
GL9D100
GL8D100
177
GL9S030
GL8S030
GL9S040
GL8S040
GL9S156
GL8S156
GL9S100
GL8S100
178
GL9H030
GL8H030
GL9H040
GL8H040
GL9H156
GL8H156
GL9H100
GL8H100
178
GL9E030
GL8E030
GL9E040
GL8E040
GL9E156
GL8E156
GL9E100
GL8E100
179
GL9K030
GL8K030
GL9K040
GL8K040
GL9K156
GL8K156
A
K
A
K
A
K
A
K
11
10
9
8.0
10.16
14.12
25.4
5
Page for ratings/characteristics diagrams
*1 A: Anode common K: Cathode common
176
179
■ Absolute Maximum Ratings(Mold Type) Figures shown below are values per segment.
(Ta=25˚C)
Peak forward current*1
Derating factor
(mA/˚C)
Reverse voltage Operating temperature Storage temperature
Character
height
(mm)
6.0
6.2
Forward current
Radiation color
IF
(mA)
10
(15)*2
20
IFM
(mA)
VR
(V)
Topr.
(˚C)
Tstg.
(˚C)
DC
Pulse
0.18
(0.27)
0.36
0.36
0.36
0.27
0.27
0.36
0.36
0.36
0.36
P
50
0.91
5
-30 to +70
-40 to +80
7.6
8.0
8.4
D
S
50
50
50
50
50
50
50
50
50
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
0.91
5
5
5
5
5
6
6
6
6
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-30 to +70
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
-40 to +80
20
20
15
15
20
20
20
20
10.16
14.12
20.32
(common)
H
E
K
D
S
25.4
H
E
*1 Duty ratio=1/10, Pulse width=0.1ms
*2 ( ): figures for GL8/9P040, GL8/9P056, GL8/9P156, GL6/7P220
■ Absolute Maximum Ratings(Substrate Type) Figures shown below are values per segment.
(Ta=25˚C)
Peak forward current*1
Derating factor
(mA/˚C)
Reverse voltage Operating temperature Storage temperature
Character
height
(mm)
Forward current
Radiation color
P
IF
(mA)
IFM
(mA)
VR
(V)
5
Topr.
(˚C)
-10 to +60
Tstg.
(˚C)
-20 to +70
DC
0.15
Pulse
1.11
7.6
15
50
*1 Duty ratio=1/10, Pulse width=0.1ms
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
173
Internet
Numeric LED
■ Multi-digits
Radiation color
S
Outline dimensions
Character
height
(mm)
P
D
H
E
Type
Type of display
Red
Red
Sunset orange
Yellow
Yellow-green
Page
183
181
Figure
15
GL7H202
GL7H201
GL7P202
GL6P202
GL7P201
GL6P201
GL7P220
GL7E202
GL6E202
GL7E201
GL6E201
GL7E220
A
K
A
K
A
K
A
K
A
K
A
K
A
K
A
K
A
6.0
10.16
14.12
8.0
GL7D201
GL6D201
GL7D220
GL6D220
13
GL7H220
GL6H220
GL7S220
GL6S220
12
GL3P306
GL3P305
GL3P412
GL3P411
GL3P422
GL3P421
GL3P404
GL3P403
GL3P508D
GL3P507D
GL7P208U▲
GL3E306
GL3E305
GL3E412
GL3E411
GL3E422
16
GL3D305
GL3H412
182
17
6.2
18
8.0
GL3E404
GL3E403
GL3D404
GL3D403
19
8.4
183
182
20
7.6
Substrate
Type
14
7.6
178
178
179
177
Page for ratings/characteristics diagrams
176
*1 A: Anode common K: Cathode common
The model marked with ▲ may not be available in the near future. Contact Sharp sales personnel for details before use.
■ Electro-optical Characteristics(Mold Type) Figures shown below are values per segment.
(Ta=25˚C)
Forward voltage
VF(V)
Peak emission wavelength
λp(nm)
Spectrum radiation bandwidth
∆λ(nm)
Reverse current
Character height Radiation
IF
(mA)
5
IR(µA)
MAX.
VR
(V)
4
(mm)
color
TYP.
MAX
TYP.
TYP.
6.0
6.2
P
D
S
H
E
K
D
S
1.9
1.85
1.9
1.9
2.0
2.0
3.6
3.8
3.8
2.5
2.3
2.5
2.5
2.5
2.5
4.6
5.0
5.0
5.0
695
635
610
585
565
555
635
610
585
565
100
35
35
30
30
30
35
35
30
30
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
4
4
4
4
4
5
4
5
5
7.6
8.0
8.2
8.4
10.16
14.12
25.4
H
E
4.0
■ Electro-optical Characteristics(Substrate Type) Figures shown below are values per segment.
(Ta=25˚C)
Forward voltage
VF(V)
Peak emission wavelength
Spectrum radiation bandwidth
Reverse current
IR(µA)
Character height Radiation
λp(nm)
TYP.
695
∆λ(nm)
TYP.
100
IF
(mA)
5
VR
(V)
4
(mm)
color
TYP.
MAX
MAX.
10
7.6
P
1.9
2.5
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
174
Internet
Numeric LED
■ Luminous Intensity(Unit:mcd) Figures shown below are values per segment.
(Ta=25˚C)
K
Radiation color
P
D
S
H
E
Character height
(mm)
Red
Red
Sunset orange
Yellow
Yellow-green
Green
Series
TYP
1.0
0.8
TYP
4.14
3.0
4.0
6.38
TYP
1.5
4.3
3.9
4.8
TYP
2.6
2.5
4.5
4.6
0.35
4.1
4.5
TYP
2.5
3.0
3.0
3.5
1.8
3.5
3.0
2.85
0.7
2.2
2.0
TYP
1.56
1.75
2.1
Anode common
GL9❏030
GL9❏040
GL9❏156
GL9❏100
GL7❏202
GL7❏201
GL7❏220
GL3❏306
GL3❏412
GL3❏422
GL3❏404
GL3❏508D
GL7❏208U▲
Cathode common
GL8❏030
GL8❏040
GL8❏156
GL8❏100
GL6❏202
GL6❏201
GL6❏220
GL3❏305
GL3❏411
GL3❏421
GL3❏403
GL3❏507D
8.0
10.16
14.12
25.4
6.0
10.16
14.12
8.0
6.2
8.0
8.4
7.6
1-digit
1.0
0.3
0.8
1.0
1.0
0.25
0.66
0.3
0.3
0.2
3.8
4.0
2.80
2-digits
3-digits
4-digits
4.5
0.6
1.25
0.8
5-digits
2-digit
Substrate
Type
7.6
* As for current conditions, refer to IF in electro-optical characteristics
The model marked with ▲ may not be available in the near future. Contact Sharp sales personnel for details before use.
Static drive circuit
Dynamic drive circuit
LED display
Vcc
a
b
a
b
c
d
e
f
c
Data bass
d
Decoder/driver
e
LED display
f
g
D.P
g
D.P
Digit driver
Processor
Digit scanner
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
175
Internet
Numeric LED Characteristics Diagrams
P series
Forward Current Derating Curve
Forward Current vs. Forward Voltage
Luminous Intensity vs. Ambient Temperature
(Ta=25˚C)
(1F=5mA/seg)
100
1000
35
50
500
200
30
25
20
15
10
20
10
5
100
50
Mold type
3
2
Substrate type
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio1/10)
(Ta=25˚C)
(Ta=25˚C)
500
70
60
50
40
30
20
500
300
200
100
50
100
Substrate type
50
30
Mold type
20
Substrate type
10
5
Mold type
10
0
10
2
1
5
-20
0
20
40
60
80
100
0.1 0.2
0.5
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
U series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(1F=20mA)
(Ta=25˚C)
100
1000
35
50
20
500
200
30
25
20
15
10
10
5
100
50
3
2
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Ta=25˚C)
(Ta=25˚C)
(Duty ratio1/10)
500
500
300
150
100
200
150
100
100
50
50
30
20
10
5
50
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
0.5
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4/38.1mm: value per 1segment 1chip
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
176
Internet
Numeric LED Characteristics Diagrams
T series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(Ta=25˚C)
(1F=20mA/seg)
100
1000
70
50
500
200
60
50
40
30
20
20
10
5
100
50
3
2
Mold type
10
20
10
1
0
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio1/10)
(Ta=25˚C)
(Ta=25˚C)
500
350
300
250
200
150
100
500
300
200
100
50
100
50
20
Mold type
Mold type
30
10
5
50
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
0.5
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4mm: value per 1segment 1chip
D series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(Ta=25˚C)
(1F=20mA/seg)
100
1000
70
50
20
500
200
60
50
40
10
5
100
50
30
Mold type
3
2
20
10
20
10
1
Substrate type
0
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio1/10)
(Ta=25˚C)
(Ta=25˚C)
500
70
60
50
40
30
20
500
300
200
100
50
100
50
Mold type
20
30
10
5
Mold type
Substrate type
Substrate type
10
0
10
2
1
5
-20
0
20
40
60
80
100
0.1 0.2
0.5
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4mm: value per 1segment 1chip
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
177
Internet
Numeric LED Characteristics Diagrams
S series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(1F=20mA/seg)
(Ta=25˚C)
100
1000
35
50
500
200
30
25
20
15
10
20
10
5
100
50
3
2
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio 0.1)
(Ta=25˚C)
(Ta=25˚C)
500
70
60
50
40
30
20
500
300
200
100
50
100
50
30
20
10
5
10
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
0.5
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4mm: value per 1segment 1chip
H series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(1F=20mA/seg)
(Ta=25˚C)
100
1000
35
50
20
500
30
25
20
15
10
200
10
5
100
50
3
2
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio 0.1)
(Ta=25˚C)
(Ta=25˚C)
500
70
60
50
40
30
20
500
300
200
100
50
100
50
30
20
10
5
10
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
0.5
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4mm: value per 1segment 1chip
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
178
Internet
Numeric LED Characteristics Diagrams
E series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(1F=20mA/seg)
(Ta=25˚C)
100
1000
35
50
500
200
30
25
20
Mold type
25.4mm
20
15
10
10
5
Mold type
100
50
3
2
Substrate type
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty 1/10)
(Ta=25˚C)
(Ta=25˚C)
500
70
500
300
60
50
40
200
100
50
100
50
Mold type
20
Substrate type
30
30
10
5
Substrate/Mold type
20
10
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
0.5
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
* In case of 25.4mm: value per 1segment 1chip
K series
Forward Current Derating Curve
Forward Current vs. Forward Voltage*
Luminous Intensity vs. Ambient Temperature
(1F=20mA/seg)
(Ta=25˚C)
100
1000
35
50
20
500
30
25
20
15
10
200
10
5
100
50
3
2
5
0
20
10
1
0.5
-20
0
20
40
60
80
100
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5
-20
0
20
40
60
80
100
Ambient temperature Ta(˚C)
Forward voltage VF(V/seg)
Ambient temperature Ta(˚C)
Peak Forward Current Derating Curve
Luminous Intensity vs. Forward Current
Duty Ratio vs. Peak Forward Current
(Duty ratio 0.1)
(Ta=25˚C)
(Ta=25˚C)
500
70
60
50
40
30
20
500
300
200
100
50
100
50
30
20
10
5
10
0
10
5
2
1
-20
0
20
40
60
80
100
0.1 0.2
1
2
5
10
20
50
1/50
1/20
1/10
1/5
1/2
1
0.5
Ambient temperature Ta(˚C)
Forward current IF(mA/seg)
Duty ratio DR
Notice
Internet
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
179
Numeric LED Outline Dimensions(Unit:mm)
9.4
1
2
0.3(Reference
dimensions)
Difference between character
center and product center
7.0
0.2(Reference
dimensions)
Difference between
character center and
product center
10-R0.3±0.1
10°
10°
10-R0.5±0.1
10
6
10
6
1.3±0.2
0.9±0.2
Segment name
A
5
Pin No.1
1.3±0.2
Segment name
B
F
G
Pin No.1
1.8±0.2
5
A
5.2
Reflector surface:Black print
Reflector surface:Black print
E
C
B
F
7.2
G
D
D.P.
E
C
Recommended soldering pattern
D
D.P.
Internal connection
diagram
Recommended soldering pattern
GL9❏03M
GL8❏03M
2.0✕0.6
Internal connection
diagram
A
7
B
6
C
4
D
2
E
1
F
9
G
10
D.P
5
A
7
B
6
C
4
D
2
E
1
F
9
G
10
D.P
5
1.8
7.2
GL9❏04M
GL8❏04M
A
7
B
6
C
4
D
2
E
1
F
9
G
D.P
A
7
B
6
C
4
D
2
E
1
F
9
G
10
D.P
5
10
5
1.3
5.2
2.0✕1.0
3
8
3
8
3
8
3
8
GL9❏03M Series GL8❏03M Series
GL9❏04M Series GL8❏04M Series
12.5
3
4
0.3(Reference
dimensions)
Difference between
10°
character center and
10-R0.7±0.1
product center
10
6
Luminous intensity rank
1.7±0.2
14.0
37.0
ø4.8
Segment name
A
Segment name
B
F
14
8
G
Pin No.1
2.45±0.2
5
A
Reflector surface:Black print
B
F
E
C
G
9.8
D
E
C
D.P.
D
D.P.
10-ø0.55
2.54✕6= 15.24
1
7
Internal connection
diagram
GL9❏56M
GL8❏56M
A
7
B
6
C
4
D
2
E
1
F
9
G
10
D.P
5
A
7
B
6
C
4
D
2
E
1
F
9
G
10
D.P
5
Internal connection diagram
A B C D E F G D.P.
GL9
❏
15
GL8❏15
Recommended soldering pattern
A B C D E F G D.P.
1214
9
8
5
2
1
6
9
8 5 2 1 12 14 6
2.45
9.8
2.1✕1.4
3
8
3
8
4
11
4
11
GL9❏56M Series GL8❏56M Series
GL9❏15 Series GL8❏15 Series
5
6
Luminous intensity rank
2.7(for all segment width)
Luminous intensity rank
2.7(for all segment width)
ø3.0
ø3.0
9.4
22.8
9.4
22.8
Segment name
14
Segment name
14
8
8
A
A
F
B
F
B
G
G
E
C
E
C
ø0.55
D
ø0.55
D
2.54✕6=
15.24
2.54
✕
6=
1
7 D.P.
1
7 D.P.
15.24
Internal connection diagram
GL9❏❏100
GL8❏❏100
Internal connection diagram
A
9
B
8
C
5
D
2
E
1
F G
12 14
D.P.
A B C D E F G D.P.
9 8 5 2 1 12 14
6
GL9 100
A B C D E F G D.P.
❏
GL8❏100
6
A B C D E F G D.P.
1214
9
8
5
2
1
6
9
8 5 2 1 12 14 6
4
11
4
11
11 (Red)
(Yellow-green)
11 (Red)
(Yellow-green
4
4
GL9❏100 Series GL8❏100 Series
GL9❏❏100 Series GL8❏❏100 Series
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
180
Internet
Numeric LED Outline Dimensions(Unit:mm)
7
8
Luminous intensity rank
6
10
Luminous intensity rank
6
10
1
5
ø2.0
5
1
7.6
ø2.0
7.6
19.0
19.0
Segment name
Segment name
A
A
F
B
F
B
G
G
10-ø0.45
10-ø0.45
E
C
E
C
D.P.
2.54✕4
D
D
2.54✕4
D.P.
=10.16
=10.16
Internal connection diagram GL9❏❏08
GL8❏❏08
5
D.P.
7
A
6
B
4
C
2
D
1
E
9
F
10
G
5
D.P.
Internal connection diagram
7
A
6
B
4
C
2
D
1
E
9
F
10
G
GL9❏08
GL8❏08
A B C D E F G D.P.
A B C D E F G D.P.
9 10
7
6
4
2
1
5
7
6 4 2 1 9 10 5
3
(Yellow-green)
8(Red)
3
(Yellow-green)
8(Red)
3
8
3
8
GL9❏08 Series GL8❏08 Series
GL9❏❏08 Series GL8❏❏08 Series
9
10
Luminous intensity rank
1.3(for all segment width)
0.3
(for all space)
(for all space)
(for all segment width)
4.8 3.2
9.6
1.0
7.0
4.0
ø1.7
4.85
12.2
Luminous intensity rank
Segment name & Pin No.
1.35
1
2
3
4
5
10
9
Internal connection diagram
A
F
0.25
B
G
8
GL9
❏156
GL8❏156
E
C
7
7.62
4
2
1
9 10 D.P.
5
A
7
B
6
C
4
D E F G D.P.
A
7
B
6
C D E F G
D
6
2
1
9
10
5
9P156
D.P.
Segment name
Internal connection diagram
GL9
❏
040
GL8
A B C D E F G
10 9
3 D.P.
❏040
109876
A B C D E F G D.P.
10 9 5 4 2 3 7
0.5
A
8
5
4
2
7
8
3
8
3
8
F
B
G
E
C
D
D.P.
2.54✕4=10.16
12345
1
6
1
6
GL9❏156 Series GL8❏156 Series
GL9❏040 Series GL8❏040 Series
Luminous intensity rank
1.0(for all segment width)
11
12
1.3(Segment width)
0.3(Space)
0.3(for all space)
2-ø1.7
1.5
6.35
ø0.9
2.2
6.35 11.2
25.0
1.0
5.0
Segment name & Pin No.
7.0±0.3
Luminous intensity rank
4.5
18
10
A2
A1
Dig.2
Dig.1
F1
E1
B1
F2
B2
S
GL7D220
2.54
G1
G2
E2
C2
C1
1.25
0.5
D1
D2
Segment name & Pin No.
1
9
10
9
1
2
3
4
5
A
2.54 8= 20.32
✕
F
B
+0.15
0.25-0
G
8
E
C
7
D
6
5.3
Internal connection diagram
D.P.
GL7
❏
220
GL6❏220
Internal connection diagram
D.P.A B C D E F G
D.P
D.P
2A
1110
D.P
D.P
2A
1A
1615
1
B
1
C
3
1
D
2
1
E
1
F
1
G
1.
2
B
2
C
8
2
D
6
2
E
5
2
F2
G
7
2
1A
1615
1
B
1
C
3
1
D
2
1
E
1
1
F
1
G
1
.
9
18 17 1110
2
B
2
C
8
2
D
6
2 E2 F2 G2
5 12 7
GL9
❏
030
GL8
❏030
4
9
4
1
18 17
12
D.P.A B C D E F G
6
7
1 10 8
1 10 8
5
4
2
3
5
4 2 3
14
Dig.1
13
Dig.2
14
Dig.1
13
Dig.2
7
9
6
9
GL9❏030 Series GL8❏030 Series
GL7❏220 Series GL6❏220 Series
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
181
Internet
Numeric LED Outline Dimensions(Unit:mm)
17.0
16.8
4.4 4.4
13
14
0.5(
Calking)
1.0(for all segment width)
0.3
(Space)
0.3
(for all space)
0.75
(Segment width)
2-ø1.6
1.9
1.5
1.0
7.0
5.8 4.3 6.2 4.3
4.0
24.0±0.4
16-ø0.55
Segment name & Pin No.
Luminous intensity rank
18
10
P20 7=14.0
✕
Dig 1
Dig 2
A1
G1B1
A2
S
GL7T201
F1
F2
E2
B2
G2
C2
0.9
4-ø4.0MAX.
(Calking)
E1
0.5+0.15
C1
D1
D2
1
-0
8
D.P.1
D.P.2
9
1
2.54✕8=20.32
9
16
14.3(Calking)
Segment name
Internal connection diagram
Internal connection diagram
GL7❏201
GL6❏201
D.P
1 1 A2 B2 C2 D
GL7P208U
A1
A2
D.P
1A
D.P
9
2
D.P2
G2
A1 B1 C1 D1 E1 F1 A2 B2 C2 D2 E2 F2 G2
G1
A1
B
16 15
1
C1
D1
E1
F
1817
1
G1
2
1110
B
2
C2
D
6
2
E
5
2
F2
12
G
7
2
A
1615
1
B
1
C
3
1
D
2
1
E
1
1
F
1
G
2
E
5
2
F2
12
F2
F1
4
4
9
7
B2
15 14
3
2
1
1613 11 10
8
7
6
12
9
G1
G2
3
2
1
8
18 17
1110
8
6
B1
E1
E2
D1
C1
D2
C2
Dig.1
Dig.2
4
5
14
13
14
13
Dig.1
Dig.2
GL7❏201 Series GL6❏201 Series
GL7P208U Series▲
.(Segment width)
0.8
15
16
1.0(for all segment width)
0.3(Space)
0.3(for all space)
2-R1.1
3-ø0.9
2.5 7.0
7.0 7.0
22.0
4.5
3
3
2.5
Depth0.3
ø1
8
1
5.5
5
8
10
Segment name
10
10.5
21
S
1
GL3E306
Segment name & Pin No.
A
F
B
Luminous intensity rank
G
16
1
13 1211
9
8
1514
10
11-ø0.45
1.5
C
E
D
A1
D2
2.54✕5=12.7
C2
F1
E2
F2
B1
G2
G1
D.P.
GL7R202
E1
B2
C1
D1
A2
Dig2
Dig.1 Dig.2 Dig.3
1
1
Dig1
2
3
4
5
6
7
6
0.5
2.54✕7= 17.78
11
7
Internal connection diagram
Internal connection diagram GL3❏306
GL3❏305
GL7❏202
GL6❏202
A
1
B1
C1
D1
E
1
F
1
G
1
A2
B
2
C2
D2
E
9
2
F
7
2
G
8
2
A
1
B
1
C
4
1
D
2
1
E
1
1
F
1
G
1
A
2
B
2
C2
D2
E
2
F
2
G
2
A B C D E
G
A B C D E
F
D.P.
F
G
D.P.
9
7
9
7
1
1
3
8 11 6
3
10
8 11 6
10
14 13
4
2
1
15 16
6
5 1210
14 13
15 16 6 5 1210 9 7 8
2
4
5
Dig.1
Dig.2
Dig.3
2
4
5
Dig.1
Dig.2
Dig.3
3
Dig.1
11
Dig.2
3
Dig.1
11
Dig.2
GL7❏202 Series GL6❏202 Series
GL3❏306 Series GL3❏305 Series
0.6(for all segment width)
0.3(for all space)
17
18
1.0(Segment width)
0.3(Space)
1
5-ø0.8
0.35
0.35
6.0
6.0
6.0
6.0
6.5 5.5
30.0
2.5
Segment name
7.0
7.0 7.0
29.0
A
U.C.
S
GL3H412
F
B
G
E
C
D
21-ø0.45
1.5
L.C. D.P.2
D.P.1
D.P.3
2.54✕10=25.4
Segment name & Pin No.
S
GL3P421
Dig.1Dig.2Dig.3Dig.4
Dig.1 Dig.2
Dig.3 Dig.4
1.5
12-ø0.45
P.16
A
P.9
11
12
1
F
B
G
2.54✕7=17.78
21
E
C
D
D.P.
P.1
Internal connection diagram
Internal connection diagram
P.7
Gl3❏412
Gl3❏411
A B C D E F G
1 8 111713 15 10 2119 18 20 5
A
B
C
D
E
F
G
GL3❏422
GL3❏421
1
8 111713 15 10 2119 18 20
5
16 U.C.
16 U.C.
A
B
C
D
E
F G D.P.
A
B
C
D
E
F G D.P.
2
4
7
9
6
Dig.1
Dig.2
Dig.3
Dig.4
L.C.
2
4
7
9
6
Dig.1
Dig.2
Dig.3
Dig.4
L.C.
141611 2 1510 9
6
141611 2 1510 9
6
1
3
4
7
Dig.1
1
3
4
7
Dig.1
Dig.2
Dig.3
Dig.4
Dig.2
Dig.3
Dig.4
12 D.P.3
14 D.P.2
D.P.1
12 D.P.3
14 D.P.2
D.P.1
3
3
GL3❏412 Series GL3❏411 Series
GL3❏422 Series GL3❏421 Series
The models marked with ▲ may not be available in the near future. Contact Sharp sales personnel for details before use.
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
182
Internet
Numeric LED Outline Dimensions(Unit:mm)
19
20
0.3 for all space
0.85(for all segment width)
6-ø1.0
10˚
0.8(Segment width)
13
20
1
11
10
0.3(for all space)
1
2.0
6.2 4.0 4.0 4.0 4.0
1.3
13.5
5-ø0.9
0.5
30.0
7.0 7.0 7.0 7.0
42.5
Segment name
Segment name
Dig.1
AM
A
G
D
Dig.2 Dig.3 Dig.4
F
E
B
C
D.
P.
S
GL3P404
A
UC
F
B
B
G
1.0
C
E
C
D
Dig.1 Dig.2 Dig.3 Dig.4 Dig.5
LC
DP
Alm
PM
2.54✕9=22.86
1.0
6.01
6.01
2.54✕12=30.48
GL3❏508D
Internal connection diagram
Internal connection diagram
GL3❏507D
GL3❏404
GL3❏403
P.
A B C D E F G D.
A B C D E F G D.
P.
DP
8
A
B
C
D
E
F
DP
8
A
B
C
D
E
F
LC
5
AMPM
20
G
UC LC Alm
AMPM
20
G
UC
Alm
10
11
6 7 8 910 1213
6
7
8
9
10111213
1
14 13
4
3
18 15 11 16
5
10
1
14 13
4
3
18 15 11 16
7
2
DP
Dig.1
17 Dig.3
Dig.2
12 Dig.4
AIm
19 AM.PM
7
2
DP
Dig.1
5Dig.1
4Dig.2
3Dig.3
2Dig.4
1Dig.5
5Dig.1
4Dig.2
3Dig.3
2Dig.4
1Dig.5
17 Dig.3
Dig.2
12 Dig.4
AIm
19 AM.PM
6
6
9
9
GL3❏404 Series GL3❏403 Series
GL3❏508D Series GL3❏507D Series
Notice
In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
183
Internet
Application Circuits
NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.
115
相关型号：
©2020 ICPDF网 联系我们和版权申明