PC367N [SHARP]
Transistor Output Optocoupler, 1-Element, 3750V Isolation, MINI-FLAT, 4 PIN;型号: | PC367N |
厂家: | SHARP ELECTRIONIC COMPONENTS |
描述: | Transistor Output Optocoupler, 1-Element, 3750V Isolation, MINI-FLAT, 4 PIN 输出元件 光电 |
文件: | 总14页 (文件大小:228K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PC367N Series
Mini-flat Package
High CMR, Low Input Current
Type Photocoupler
PC367N Series
■ Description
PC367N contains an IRED optically coupled to a
phototransistor.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC367)
It is packaged in a 4-pin mini-flat.
Low input current type.
2. Package resin : UL flammability grade (94V-0)
Input-output isolation voltage(rms) is 3.75kV.
Collector-emitter voltage is 80V (*) and CTR is
100% to 500% at input current of 0.5mA.
■ Applications
1. Programmable controllers
2. Facsimiles
3. Telephones
■ Features
1. 4-pin Mini-flat package
2. Double transfer mold package (Ideal for Flow
Soldering)
3. Low input current type (IF=0.5mA)
4. High collector-emitter voltage (VCEO : 80V(∗))
5. High noise immunity due to high common mode
rejection voltage (CMR : MIN. 10kV/µs)
6. High isolation voltage between input and output
(Viso(rms) : 3.75kV)
(*) Up to Date code "P9" (September 2002) VCEO : 70V.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A00501EN
1
Date Sep. 30. 2003
© SHARP Corporation
PC367N Series
■ Internal Connection Diagram
1
2
3
4
Anode
1
4
3
Cathode
Emitter
Collector
2
■ Outline Dimensions
(Unit : mm)
0.3
3.6
0.25
2.54
4
3
Date code
SHARP mark
"s"
Anode mark
367
Rank mark
Factory identification mark
0.1
1
2
0.4
0.3
5.3
45˚
Epoxy resin
+0.4
0.5
−0.2
+0.2
−0.7
7.0
Product mass : approx. 0.1g
Sheet No.: D2-A00501EN
2
PC367N Series
Date code (2 digit)
1st digit
2nd digit
Year of production
Month of production
A.D.
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
A.D
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
Mark
P
Month
Mark
1
Mark
A
B
January
February
March
R
2
S
3
C
T
April
4
D
E
U
May
5
F
V
June
6
H
J
W
X
July
7
August
September
October
November
December
8
K
L
A
9
B
O
N
D
M
N
C
·
·
·
·
·
·
repeats in a 20 year cycle
Factory identification mark
Factory identification Mark
Country of origin
no mark
Japan
Indonesia
Philippines
China
* This factory marking is for identification purpose only.
Please Contact the local SHARP sales reprsentative to see the actual status of
the production.
Rank mark
Refer to the Model Line-up table
Sheet No.: D2-A00501EN
3
PC367N Series
■ Absolute Maximum Ratings
(Ta=25˚C)
Unit
mA
mA
V
Parameter
Forward current
Symbol
IF
Rating
10
*1 Peak forward current
IFM
200
Reverse voltage
VR
6
Power dissipation
P
15
*4 80
mW
V
Collector-emitter voltage
Emitter-collector voltage
Collector current
VCEO
VECO
IC
6
50
V
mA
mW
mW
˚C
Collector power dissipation
Total power dissipation
Operating temperature
Storage temperature
*2 Isolation voltage
*3 Soldering temperature
PC
150
Ptot
170
Topr
Tstg
Viso (rms)
Tsol
−30 to +100
−40 to +125
3.75
˚C
kV
260
˚C
*1 Pulse width≤100µs, Duty ratio : 0.001
*2 40 to 60%RH, AC for 1 minute, f=60Hz
*3 For 10s
*4 Up to Date code "P9" (September 2002) VCEO : 70V
■ Electro-optical Characteristics
(Ta=25˚C)
Parameter
Forward voltage
Symbol
VF
Conditions
MIN.
TYP.
MAX.
1.4
10
Unit
V
IF=10mA
VR=4V
−
1.2
Input Reverse current
Terminal capacitance
Collector dark current
IR
−
−
µA
pF
nA
V
Ct
V=0, f=1kHz
−
30
250
100
−
ICEO
VCE=50V, IF=0
IC=0.1mA, IF=0
IE=10µA, IF=0
IF=0.5mA, VCE=5V
IF=10mA, IC=1mA
DC500V, 40 to 60%RH
V=0, f=1MHz
−
*5 80
−
Output Collector-emitter breakdown voltage BVCEO
−
Emitter-collector breakdown voltage
BVECO
IC
6
−
−
V
Collector current
0.5
−
2.5
0.2
−
mA
V
Collector-emitter saturation voltage VCE (sat)
−
−
1×1011
0.6
4
Isolation resistance
Floating capacitance
RISO
Cf
tr
5×1010
Ω
Transfer
charac-
teristics
−
−
−
1.0
18
pF
µs
µs
Rise time
Response time
VCE=2V, IC=2mA, RL=100Ω
Fall time
tf
3
18
Ta=25˚C, RL=470Ω, VCM=1.5kV(peak)
IF=0mA, VCC=9V, Vnp=100mV
Common mode rejection voltage
CMR
10
−
−
kV/µs
*5 Up to Date code "P9" (September 2002) BVCEO≥70V.
Sheet No.: D2-A00501EN
4
PC367N Series
■ Model Line-up
Taping
3 000pcs/reel 750pcs/reel
IC [mA]
Rank mark
Package
(I =0.5mA, V =5V, T =25˚C)
F
CE
a
PC367N
PC367N1
PC367N2
PC367NT
PC367N1T
PC367N2T
with or without
0.5 to 2.5
0.75 to 1.5
1.0 to 2.0
Model No.
A
B
Please contact a local SHARP sales representative to inquire about production status and Lead-Free options.
Sheet No.: D2-A00501EN
5
PC367N Series
Fig.1 Test Circuit for Common Mode Rejection Voltae
(dV/dt)
VCC
VCM
RL
VO
1)
Vnp
Vcp
VCM : High wave
pulse
RL=470Ω
VO
(Vcp Nearly = dV/dt×Cf×RL)
1) Vcp : Voltage which is generated by displacement current in floating
capacitance between primary and secondary side.
VCM
VCC=9V
Fig.2 Forward Current vs. Ambient
Temperature
Fig.3 Diode Power Dissipation vs. Ambient
Temperature
15
10
10
5
0
5
0
−30
0
25
50
75
100
125
−30
0
25
50
75
100
125
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Fig.4 Collector Power Dissipation vs.
Ambient Temperature
Fig.5 Total Power Dissipation vs. Ambient
Temperature
200
200
150
100
170
150
100
50
0
50
0
−30
0
25
50
75
100
125
−30
0
25
50
75
100
125
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Sheet No.: D2-A00501EN
6
PC367N Series
Fig.6 Peak Forward Current vs. Duty Ratio
Fig.7 Forward Current vs. Forward Voltage
100
2 000
1 000
500
Pulse width≤100µs
Ta=25˚C
10
200
100
50
Ta=25˚C
Ta=100˚C
Ta=0˚C
Ta=75˚C
Ta=50˚C
1
Ta=−25˚C
20
10
0.1
5
10−3
2
5
10−2
Duty ratio
2
5
10−1
2
5
1
0
0.5
1.0
1.5
2.0
Forward voltage VF (V)
Fig.8 Current Transfer Ratio vs. Forward
Current
Fig.9 Collector Current vs. Collector-emitter
Voltage
700
30
VCE=5V
Ta=25˚C
IF=7mA
Ta=25˚C
600
25
PC (MAX.)
IF=5mA
500
400
300
200
20
IF=3mA
15
IF=2mA
10
IF=1mA
5
100
0
IF=0.5mA
0
0.1
1
10
0
2
4
6
8
10
Forward current IF (mA)
Collector-emitter voltage VCE (V)
Fig.10 Relative Current Transfer Ratio vs.
Ambient Temperature
Fig.11 Collector - emitter Saturation Voltage
vs. Ambient Temperature
160
0.16
VCE=5V
IF=10mA
IF=0.5mA
IC=1mA
140
0.14
120
100
80
60
40
20
0
0.12
0.10
0.08
0.06
0.04
0.02
0
−30 −20 −10
0
10 20 30 40 50 60 70 80 90 100
−30 −20 −10
0
10 20 30 40 50 60 70 80 90 100
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Sheet No.: D2-A00501EN
7
PC367N Series
Fig.12 Collector Dark Current vs. Ambient
Temperature
Fig.13 Response Time vs. Load Resistance
(Active region)
10−5
100
VCE=2V, IC=2mA
VCE=50V
10−6
10−7
10−8
10−9
tr
tf
10
td
ts
10−10
10−11
1
0.1
−30 −20 −10
0
10 20 30 40 50 60 70 80 90 100
1
10
Ambient temperature Ta (˚C)
Load resistance RL (kΩ)
Fig.14 Response Time vs. Load Resistance
Fig.15 Test Circuit for Response Time
(Saturation region)
1 000
V =5V, IF=1mA, T =25˚C
cc a
VCC
RL
RD
Input
Input
Output
VCE
tf
Output
ts
10%
90%
100
10
ts
tf
td
tr
tr
Please refer to the conditions in Fig.13 and Fig.14
td
1
1
10
100
Load resistance RL (kΩ)
Fig.16 Frequency Response
Fig.17 Collector-emitter Saturation Voltage
vs. Forward Current
5
5
0
IC=7mA
Ta=25˚C
IC=5mA
VCE=2V
IC=2mA
Ta=25˚C
4
IC=3mA
RL=10kΩ
−5
IC=2mA
3
1kΩ
IC=1mA
−10
−15
IC=0.5mA
100Ω
2
1
0
−20
−25
0.1
1
10
100
1 000
0
2
4
6
8
10
Frequency f (kHz)
Forward current IF (mA)
Remarks : Please be aware that all data in the graph are just for reference and not for guarantee.
8
Sheet No.: D2-A00501EN
PC367N Series
■ Design Considerations
● Design guide
While operating at IF<0.5mA, CTR variation may increase.
Please make design considering this fact.
In case that some sudden big noise caused by voltage variation is provided between primary and secondary
terminals of photocoupler some current caused by it is fioating capacitance may be generated and result in
false operation since current may go through IRED or current may change.
If the photocoupler may be used under the circumstances where noise will be generated we recommend to
use the bypass capacitors at the both ends of IRED.
This product is not designed against irradiation and incorporates non-coherent IRED.
● Degradation
In general, the emission of the IRED used in photocouplers will degrade over time.
In the case of long term operation, please take the general IRED degradation (50% degradation over 5years)
into the design consideration.
● Recommended Foot Print (reference)
6.3
1.5
(Unit : mm)
✩
For additional design assistance, please review our corresponding Optoelectronic Application Notes.
Sheet No.: D2-A00501EN
9
PC367N Series
■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
(˚C)
300
Terminal : 260˚C peak
( package surface : 250˚C peak)
200
Reflow
220˚C or more, 60s or less
Preheat
100
150 to 180˚C, 120s or less
0
0
1
2
3
4
(min)
Flow Soldering :
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the below
listed guidelines.
Flow soldering should be completed below 260˚C and within 10s.
Preheating is within the bounds of 100 to 150˚C and 30 to 80s.
Please don't solder more than twice.
Hand soldering
Hand soldering should be completed within 3s when the point of solder iron is below 400˚C.
Please don't solder more than twice.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Sheet No.: D2-A00501EN
10
PC367N Series
● Cleaning instructions
Solvent cleaning:
Solvent temperature should be 45˚C or below Immersion time should be 3minutes or less
Ultrasonic cleaning:
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials:
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
● Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this device.
Regulation substances:CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
Sheet No.: D2-A00501EN
11
PC367N Series
■ Package specification
● Tape and Reel package
1. 3 000pcs/reel
Package materials
Carrier tape : A-PET (with anti-static material)
Cover tape : PET (three layer system)
Reel : PS
Carrier tape structure and Dimensions
F
E
D
G
J
I
M A X .
K
5 ˚
Dimensions List
(Unit : mm)
A
B
C
D
E
F
G
0.3
0.1
0.1
0.1
0.1
0.1
0.1
+0.1
12.0
H
5.5
1.75
J
8.0
K
2.0
4.0
φ1.5
−0
I
0.1
0.05
0.1
7.4
0.3
3.1
4.0
Reel structure and Dimensions
e
d
g
Dimensions List
(Unit : mm)
a
b
c
d
1.5
1.0
0.5
370
e
13.5
f
80
g
13
f
1.0
0.5
0.5
a
21
2.0
2.0
b
Direction of product insertion
Pull-out direction
[Packing : 3 000pcs/reel]
Sheet No.: D2-A00501EN
12
PC367N Series
2. 750 pcs / reel
Package materials
Carrier tape : A-PET (with anti-static material)
Cover tape : PET (three layer system)
Reel : PS
Carrier tape structure and Dimensions
F
E
D
G
J
I
M A X .
K
5 ˚
Dimensions List
(Unit : mm)
A
B
C
D
E
F
G
0.3
0.1
0.1
0.1
0.1
0.1
0.1
+0.1
12.0
H
5.5
1.75
J
8.0
K
2.0
4.0
φ1.5
−0
I
0.1
0.05
0.1
7.4
0.3
3.1
4.0
Reel structure and Dimensions
e
d
g
Dimensions List
(Unit : mm)
a
b
c
d
1.5
1.0
0.5
180
e
13.5
f
80
g
13
f
1.0
0.5
0.5
a
21
2.0
2.0
b
Direction of product insertion
Pull-out direction
[Packing : 750pcs/reel]
Sheet No.: D2-A00501EN
13
PC367N Series
■ Important Notices
· The circuit application examples in this publication are
provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems rela-
ted to any intellectual property right of a third party re-
sulting from the use of SHARP's devices.
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in connec-
tion with equipment that requires an extremely high lev-
el of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
scuba).
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the spec-
ifications, characteristics, data, materials, structure,
and other contents described herein at any time without
notice in order to improve design or reliability. Manufac-
turing locations are also subject to change without no-
tice.
· If the SHARP devices listed in this publication fall with-
in the scope of strategic products described in the For-
eign Exchange and Foreign Trade Law of Japan, it is
necessary to obtain approval to export such SHARP de-
vices.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specified in the relevant specification
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
--- Personal computers
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under the
copyright laws, no part of this publication may be repro-
duced or transmitted in any form or by any means, elec-
tronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
Express written permission is also required before any
use of this publication may be made by a third party.
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
· Contact and consult with a SHARP representative if
there are any questions about the contents of this pub-
lication.
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
Sheet No.: D2-A00501EN
14
相关型号:
PC367N1T000F
Transistor Output Optocoupler, 1-Element, 3750V Isolation, ROHS COMPLIANT, PLASTIC, MINI-FLAT-4
SHARP
PC367N2J000F
Transistor Output Optocoupler, 1-Element, 3750V Isolation, ROHS COMPLIANT, PLASTIC, MINI-FLAT-4
SHARP
PC367NT0000F
Transistor Output Optocoupler, 1-Element, 3750V Isolation, ROHS COMPLIANT, PLASTIC, MINI-FLAT-4
SHARP
©2020 ICPDF网 联系我们和版权申明