PC847XI5J00F [SHARP]
Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-16;
| 型号： | PC847XI5J00F |
| 厂家： | 
SHARP ELECTRIONIC COMPONENTS |
| 描述： | Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-16 输出元件 光电 |
| 文件： | 总13页 (文件大小：218K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PC847XJ0000F Series
DIP 16pin (4-channel)
General Purpose
Photocoupler
PC847XJ0000F
Series
∗1-channel package type is also available.
(model No. PC817XJ0000F Series)
■ Description
PC847XJ0000F Series contains an IRED optically
coupled to a phototransistor.
■ Agency approvals/Compliance
1. Recognized by UL1577 (Double protection isolation),
file No. E64380 (as model No. PC817)
It is packaged in a 4-channel package, available in
SMT gullwing lead-form option.
2. Package resin : UL flammability grade (94V-0)
Input-output isolation voltage(rms) is 5.0kV.
Collector-emitter voltage is 80V and CTR is 50% to
600% at input current of 5mA.
■ Applications
1. I/O isolation for MCUs (Micro Controller Units)
2. Noise suppression in switching circuits
3. Signal transmission between circuits of different po-
tentials and impedances
■ Features
1. 16pin DIP 4-channnel package
2. Double transfer mold package (ldeal for Flow Solder-
ing)
3. High collector-emitter voltage (VCEO : 80V)
4. Current transfer ratio (CTR : MIN. 50% at IF=5mA,
VCE=5V)
5. Several CTR ranks available
6. High isolation voltage between input and output
(Viso(rms) : 5.0kV)
7. Lead-free and RoHS directive compliant
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D2-A03202EN
1
Date Jun. 30. 2005
© SHARP Corporation
PC847XJ0000F Series
■ Internal Connection Diagram
16
15
14
13
12
11
10
7
9
8
1
2
3
4
5
6
7
8
Anode
Cathode
Emitter
Collector
9 11 13 15
10 12 14 16
1
2
3
4
5
6
■ Outline Dimensions
(Unit : mm)
1. Through-Hole [ex. PC847XJ0000F]
1.2±0.3
0.6±0.2
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
2.54±0.25
19.82±0.5
7.62±0.3
Epoxy resin
0.5±0.1
θ
θ
θ : 0 to 13˚
Product mass : approx. 1.0g
2. SMT Gullwing Lead-Form [ex. PC847XIJ000F]
1.2±0.3
0.6±0.2
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
2.54±0.25
19.82±0.5
7.62±0.3
Epoxy resin
+0.4
+0.4
1.0
1.0
−0
−0
+0
10.0
−0.5
Product mass : approx. 0.9g
Plating material : SnCu (Cu : TYP. 2%)
2
Sheet No.: D2-A03202EN
PC847XJ0000F Series
Date code (2 digit)
1st digit
2nd digit
Year of production
Month of production
A.D.
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
A.D
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
Mark
P
Month
Mark
1
Mark
A
B
January
February
March
R
2
S
3
C
T
April
4
D
E
U
May
5
F
V
June
6
H
J
W
X
July
7
August
September
October
November
December
8
K
L
A
9
B
O
N
D
M
N
C
·
·
·
·
·
·
repeats in a 20 year cycle
Factory identification mark
Factory identification Mark
Country of origin
no mark
Japan
Indonesia
China
* This factory marking is for identification purpose only.
Please contact the local SHARP sales representative to see
the actual status of the production.
Rank mark
There is no rank mark indicator.
Sheet No.: D2-A03202EN
3
PC847XJ0000F Series
■ Absolute Maximum Ratings
(Ta=25˚C)
Unit
mA
A
Parameter
Symbol
IF
Rating
Forward current
50
*1 Peak forward current
Reverse voltage
IFM
1
VR
6
V
Power dissipation
P
70
mW
V
Collector-emitter voltage
Emitter-collector voltage
Collector current
VCEO
VECO
IC
80
6
50
V
mA
mW
mW
kV
Collector power dissipation
Total power dissipation
*2 Isolation voltage
Operating temperature
Storage temperature
*3 Soldering temperature
PC
150
Ptot
200
Viso (rms)
Topr
Tstg
Tsol
5.0
−30 to +100
−55 to +125
260
˚C
˚C
˚C
*1 Pulse width≤100µs, Duty ratio : 0.001
*2 40 to 60%RH, AC for 1 minute, f = 60Hz
*3 For 10s
■ Electro-optical Characteristics
(Ta=25˚C)
Parameter
Symbol
VF
Conditions
MIN.
TYP.
MAX.
1.4
3.0
10
Unit
V
Forward voltage
IF=20mA
IFM=0.5A
−
1.2
Peak forward voltage
Reverse current
VFM
IR
−
−
−
V
Input
VR=4V
−
µA
pF
nA
V
Terminal capacitance
Collector dark current
Ct
V=0, f=1kHz
−
30
−
250
100
−
ICEO
BVCEO
BVECO
IC
VCE=50V, IF=0
−
Output Collector-emitter breakdown voltage
Emitter-collector breakdown voltage
Collector current
IC=0.1mA, IF=0
80
−
IE=10µA, IF=0
6
−
−
V
IF=5mA, VCE=5V
IF=20mA, IC=1mA
DC500V, 40 to 60%RH
V=0, f=1MHz
2.5
−
30.0
0.2
−
mA
V
Collector-emitter saturation voltage VCE (sat)
−
0.1
1×1011
0.6
80
4
Isolation resistance
Floating capacitance
Cutt-off frequency
RISO
Cf
fC
5×1010
Ω
Transfer
charac-
teristics
−
−
−
−
1.0
−
pF
kHz
µs
µs
VCE=5V, IC=2mA, RL=100Ω, −3dB
Rise time
tr
18
Response time
VCE=2V, IC=2mA, RL=100Ω
Fall time
tf
3
18
Sheet No.: D2-A03202EN
4
PC847XJ0000F Series
■ Model Line-up
Lead Form
Through-Hole
SMT Gullwing
IC [mA]
(IF=5mA, VCE=5V, Ta=25˚C)
Sleeve
25pcs/sleeve
PC847XJ0000F
Package
PC847XIJ000F
PC847XI5J00F
PC847XI6J00F
PC847XI7J00F
PC847XI8J00F
PC847XI9J00F
PC847XI0J00F
2.5 to 30.0
4.0 to 13.0
6.5 to 20.0
10.0 to 30.0
4.0 to 20.0
6.0 to 30.0
4.0 to 30.0
PC847X5J000F
PC847X6J000F
PC847X7J000F
PC847X8J000F
PC847X9J000F
PC847X0J000F
Model No.
Please contact a local SHARP sales representative to inquire about production status.
Sheet No.: D2-A03202EN
5
PC847XJ0000F Series
Fig.2 Diode Power Dissipation vs.
Fig.1 Forward Current vs. Ambient
Temperature
Ambient Temperature
100
50
40
30
20
80
70
60
40
20
0
10
0
−30
0
25
50 55 75
100
125
−30
0
25
50 55 75
100
125
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Fig.3 Collector Power Dissipation vs.
Fig.4 Total Power Dissipation vs. Ambient
Ambient Temperature
250
Temperature
250
200
150
100
200
150
100
50
0
50
0
−30
0
25
50
75
100
125
−30
0
25
50
75
100
125
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Fig.5 Peak Forward Current vs. Duty Ratio
Fig.6 Current Transfer Ratio vs. Forward
Current
10 000
800
Pulse width≤100µs
VCE=5V
Ta=25˚C
Ta=25˚C
700
600
500
400
300
200
1 000
100
10
100
0
10−3
10−2
Duty ratio
10−1
1
0.1
1
10
Forward current IF (mA)
Sheet No.: D2-A03202EN
6
PC847XJ0000F Series
Fig.7 Forward Current vs. Forward Voltage
Fig.8 Collector Current vs. Collector-emitter
Voltage
30
Ta=75˚C
IF=30mA
20mA
Ta=25˚C
25
20
15
10
50˚C
25˚C
P
C (MAX.)
100
0˚C
−25˚C
10mA
10
5mA
5
0
1
0
1
2
3
4
5
6
7
8
9
0
0.5
1
1.5
2
2.5
3
3.5
Collector-emitter voltage VCE (V)
Forward voltage VF (V)
Fig.9 Relative Current Transfer Ratio vs.
Fig.10 Collector - emitter Saturation Voltage
vs. Ambient Temperature
Ambient Temperature
150
0.14
IF=20mA
IF=1mA,VCE=5V
IC=1mA
0.12
IF=5mA,VCE=5V
0.1
0.08
0.06
0.04
100
50
0
0.02
0
−20
0
20
40
60
−20
0
20
40
60
−40
80
100
−40
80
100
Ambient temperature Ta (˚C)
Ambient temperature Ta (˚C)
Fig.11 Collector Dark Current vs. Ambient
Temperature
Fig.12 Collector-emitter Saturation Voltage
vs. Forward Current
6
10−5
VCE=50V
Ta=25˚C
10−6
10−7
10−8
10−9
5
IC=0.5mA
1mA
4
3mA
5mA
3
7mA
2
10−10
10−11
1
0
0
5
10
15
−30
0
20
40
60
80
100
Ambient temperature Ta (˚C)
Forward current IF (mA)
Sheet No.: D2-A03202EN
7
PC847XJ0000F Series
Fig.13 Response Time vs. Load Resistance
Fig.14 Test Circuit for Response Time
VCE=2V
IC=2mA
Ta=25˚C
Input
VCC
RL
100
Output
tr
10%
90%
Input RD
Output
VCE
tf
10
td
ts
tr
tf
td
ts
Please refer to the conditions in Fig.13.
1
0.1
0.01
0.1
1
10
Load resistance RL (kΩ)
Fig.15 Frequency Response
Fig.16 Test Circuit for Frequency Response
VCC
VCE=5V
IC=2mA
Ta=25˚C
RL
RD
Output
0
100Ω
1kΩ
Please refer to the conditions in Fig.15.
−10
RL=10kΩ
−20
1
10
100
Frequency f (kHz)
Remarks : Please be aware that all data in the graph are just for reference and not for guarantee.
Sheet No.: D2-A03202EN
8
PC847XJ0000F Series
■ Design Considerations
● Design guide
While operating at IF<1.0mA, CTR variation may increase.
Please make design considering this fact.
This product is not designed against irradiation and incorporates non-coherent IRED.
● Degradation
In general, the emission of the IRED used in photocouplers will degrade over time.
In the case of long term operation, please take the general IRED degradation (50% degradation over 5
years) into the design consideration.
● Recommended Foot Print (reference)
8.2
2.2
(Unit : mm)
✩
For additional design assistance, please review our corresponding Optoelectronic Application Notes.
Sheet No.: D2-A03202EN
9
PC847XJ0000F Series
■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
(˚C)
300
Terminal : 260˚C peak
( package surface : 250˚C peak)
200
Reflow
220˚C or more, 60s or less
Preheat
100
150 to 180˚C, 120s or less
0
0
1
2
3
4
(min)
Flow Soldering :
Due to SHARP's double transfer mold construction submersion in flow solder bath is allowed under the below
listed guidelines.
Flow soldering should be completed below 270˚C and within 10s.
Preheating is within the bounds of 100 to 150˚C and 30 to 80s.
Please don't solder more than twice.
Hand soldering
Hand soldering should be completed within 3s when the point of solder iron is below 400˚C.
Please don't solder more than twice.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Sheet No.: D2-A03202EN
10
PC847XJ0000F Series
● Cleaning instructions
Solvent cleaning:
Solvent temperature should be 45˚C or below Immersion time should be 3 minutes or less
Ultrasonic cleaning:
The impact on the device varies depending on the size of the cleaning bath, ultrasonic output, cleaning time,
size of PCB and mounting method of the device.
Therefore, please make sure the device withstands the ultrasonic cleaning in actual conditions in advance of
mass production.
Recommended solvent materials:
Ethyl alcohol, Methyl alcohol and Isopropyl alcohol
In case the other type of solvent materials are intended to be used, please make sure they work fine in ac-
tual using conditions since some materials may erode the packaging resin.
● Presence of ODC
This product shall not contain the following materials.
And they are not used in the production process for this product.
Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)
Specific brominated flame retardants such as the PBBOs and PBBs are not used in this product at all.
This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).
•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominated di-
phenyl ethers (PBDE).
Sheet No.: D2-A03202EN
11
PC847XJ0000F Series
■ Package specification
● Sleeve package
Package materials
Sleeve : HIPS (with anti-static material)
Stopper : Styrene-Elastomer
Package method
MAX. 25pcs of products shall be packaged in a sleeve. Both ends shall be closed by tabbed and tabless
stoppers.
The product shall be arranged in the sleeve with its anode mark on the tabless stopper side.
MAX. 20 sleeves in one case.
Sleeve outline dimensions
12.0
6.7
(Unit : mm)
Sheet No.: D2-A03202EN
12
PC847XJ0000F Series
■ Important Notices
· The circuit application examples in this publication are
provided to explain representative applications of
SHARP devices and are not intended to guarantee any
circuit design or license any intellectual property rights.
SHARP takes no responsibility for any problems rela-
ted to any intellectual property right of a third party re-
sulting from the use of SHARP's devices.
with equipment that requires higher reliability such as:
--- Transportation control and safety equipment (i.e.,
aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii) SHARP devices shall not be used for or in connec-
tion with equipment that requires an extremely high lev-
el of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g.,
scuba).
· Contact SHARP in order to obtain the latest device
specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the spec-
ifications, characteristics, data, materials, structure,
and other contents described herein at any time without
notice in order to improve design or reliability. Manufac-
turing locations are also subject to change without no-
tice.
· If the SHARP devices listed in this publication fall with-
in the scope of strategic products described in the For-
eign Exchange and Foreign Trade Law of Japan, it is
necessary to obtain approval to export such SHARP de-
vices.
· Observe the following points when using any devices
in this publication. SHARP takes no responsibility for
damage caused by improper use of the devices which
does not meet the conditions and absolute maximum
ratings to be used specified in the relevant specification
sheet nor meet the following conditions:
(i) The devices in this publication are designed for use
in general electronic equipment designs such as:
--- Personal computers
· This publication is the proprietary product of SHARP
and is copyrighted, with all rights reserved. Under the
copyright laws, no part of this publication may be repro-
duced or transmitted in any form or by any means, elec-
tronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
Express written permission is also required before any
use of this publication may be made by a third party.
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
· Contact and consult with a SHARP representative if
there are any questions about the contents of this pub-
lication.
(ii) Measures such as fail-safe function and redundant
design should be taken to ensure reliability and safety
when SHARP devices are used for or in connection
[E189]
Sheet No.: D2-A03202EN
13
相关型号：
PC847XI7J00F
Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-16
SHARP
PC847XI9J00F
Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-16
SHARP
PC847XIJ000F
Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-16
SHARP
PC847XJ0000F
Transistor Output Optocoupler, 4-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, DIP-16
SHARP
PC851XIJ000F
Transistor Output Optocoupler, 1-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, SMT, DIP-4
SHARP
PC851XJ0000F
Transistor Output Optocoupler, 1-Element, 5000V Isolation, ROHS COMPLIANT, PLASTIC, DIP-4
SHARP
©2020 ICPDF网 联系我们和版权申明