PQ050ES3MXPQ [SHARP]

Fixed Positive Standard Regulator, 5VPBCY3, TO-92, 3 PIN;


型号：	PQ050ES3MXPQ
厂家：	SHARP ELECTRIONIC COMPONENTS
描述：	Fixed Positive Standard Regulator, 5VPBCY3, TO-92, 3 PIN 线性稳压器IC 调节器电源电路输出元件
文件：	总3页 (文件大小：37K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Under development

New product

PQ035ES1MXP

PQ050ES3MXP

Low Power-Loss Voltage Regulator

Low Output Current, Compact Surface Mount Type Low Power-Loss Voltage Regulators

Outline Dimensions

(Unit: mm)

Features

4.2(MAX)

1.4±0.1

(1) Compact package : TO-92 type

5.2(MAX)

(Size(mold part) 5.2 × 5.5 × 4.2 mm)

(2) Small current output : 300 mA(MAX.)

(3) Low power-loss :

Dropout voltage : MAX. 0.7 V at Io=300 mA

(4) Built-in overcurrent, overheat protection functions

(5) Taped package

0.6(MAX)

0.4±0.05

0.45±0.1

0.4

2.5±

0.1

Applications

(1) TV

(2) VCR

(3) Air conditioner

(4) DVD player

(5) Audio equipment

Internal connection

DC output(Vo)

Control

circuit

GND

DC input(Vin)

Absolute Maximum Ratings

(Ta=25°C)

Parameter

Input voltage

Symbol

Vin

Ratings

Unit

Output current

300

°C

*1 All are open except GND

and applicable terminals.

*2 At mounted condition

Power dissipation

520

Junction temperature

Operating temperature

Storage temperature

Soldering temperature

150

*3 Overheat protection may operate

Topr

Tstg

Tsol

-30 to +80

-55 to +150

260(For 10s)

°C

at 125≤Tj≤150°C.

°C

(Notice)

•In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment

using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before

using any SHARP device.

•Specifications are subject to change without notice for improvement.

(Internet)

•Data for Sharp's optoelectronic/power devices is provided on internet. (Address http://sharp-world.com/ecg/)

D5-020903

1/2

PQ033ES3MXP

PQ050ES3MXP

Low Power-Loss Voltage Regulator

Electrical Characteristics

(Unless otherwise specified, Vin=Vo(TYP.)+1.0V, Io=30mA.Ta=25°C)

Parameter

Output voltage

Symbol

Conditions

MIN. TYP. MAX.

Unit

Refer to the table below.

Load regulation

RegL

Io=5 mA to 300 mA

Vin=Vo(TYP.)+1V to

Vo(TYP.)+6V(MAX. 9V)

Io=10mA, Tj=-25 to +75°C

160

Line regulation

RegI

TcVo

3.0

0.05

mV/°C

Temperature coefficient of output voltage

Ripple rejection

Dropout voltage

Vi-o

Io=300 mA, Vin=*4

Io=0mA

0.3

0.7

650

Quiescent current

190

µA

*4 Dropout voltage when output voltage lowers 0.1V from the voltage at Vin=Vo+1V.

Output Voltage Line-up

(Vin=Vo(TYP.)+1.0V, Io=30mA.Ta=25°C)

Parameter

Symbol

Conditions

MIN.

3.234

4.900

TYP.

3.3

MAX.

3.366

5.100

Unit

PQ033ES3MXP

PQ050ES3MXP

Output voltage

V_O

–

5.0

As of September 2002

D5-020903

2/2

NOTICE

The circuit application examples in this publication are provided to explain representative applications of SHARP

devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes

no responsibility for any problems related to any intellectual property right of a third party resulting from the use of

SHARP's devices.

Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP

reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents

described herein at any time without notice in order to improve design or reliability. Manufacturing locations are

also subject to change without notice.

Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage

caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used

specified in the relevant specification sheet nor meet the following conditions:

(i) The devices in this publication are designed for use in general electronic equipment designs such as:

--- Personal computers

--- Office automation equipment

--- Telecommunication equipment [terminal]

--- Test and measurement equipment

--- Industrial control

--- Audio visual equipment

--- Consumer electronics

(ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when

SHARP devices are used for or in connection with equipment that requires higher reliability such as:

--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)

--- Traffic signals

--- Gas leakage sensor breakers

--- Alarm equipment

--- Various safety devices, etc.

(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of

reliability and safety such as:

--- Space applications

--- Telecommunication equipment [trunk lines]

--- Nuclear power control equipment

--- Medical and other life support equipment (e.g., scuba).

If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign

Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices.

laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written

permission is also required before any use of this publication may be made by a third party.

Contact and consult with a SHARP representative if there are any questions about the contents of this publication.

PQ050ES3MXPQ [SHARP]

相关型号：

PQ050RD01SZ

PQ050RD01SZH

PQ050RDA1SZH

PQ050RDA2SZH

PQ05DZ11

PQ05DZ11U

PQ05DZ1U

PQ05DZ1UJ00H

PQ05DZ51

PQ05DZ51J00H

PQ05DZ51U

PQ05DZ5U