SLS-11-800-0BB [SHINMEI]
High power seesaw Switch;型号: | SLS-11-800-0BB |
厂家: | SHINMEI |
描述: | High power seesaw Switch |
文件: | 总6页 (文件大小:142K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
http://www.shinmei-e. co. jp
High power seesaw Switch
SLS-800 Series
1/6
[] Features
<>It is a seesaw switch for a high current.
<>Sharp feeling.
<>Cadmium is not used for contact.
<>It suits insulation grade class II of EN61058-1.
<>3 point of contact interval mm or more.
<>Various safety standards are acquired. (C-UL, SEMKO, TUV)
<>160A in rushing into current correspondence.
<>The terminal shape prepares solder and tab terminal (#250).
<>There are two kinds of circuit diagrams, that is, SPST and DPST.
[] Applications
<>Data processing equipment and office equipment such as copiers, laser beam printer with
high power consumption.
[] Product number system
SLS-a1-800b-cde
a : Circuit diagram / 1:SPST
2:DPST
b : Terminal shaped / Blank : Solder terminal
A: Tab terminal (#250)
B: Solder terminal bent 90 degrees. (only SPST)
C: Tab terminal (#250) bent 90 degrees (only SPST)
c : Marking / 0 : None
1 : I / O
2 : - / O
3 :
d : Knob color / B : Black
W : White
R : Red
e : Case color / B : Black
W : White
R : Red
SHINMEI ELECTRIC CO., LTD.
SLS-800 Series
2/6
[] Products line
No
Products number
Circuit diagram
Terminal shaped
Solder
Marking
Operating force
SLS-11-800-0BB
SLS-11-800-1BB
SLS-11-800-2BB
SLS-11-800-3BB
SLS-11-800A-0BB
SLS-11-800A-1BB
SLS-11-800A-2BB
SLS-11-800A-3BB
SLS-11-800B-0BB
SLS-11-800B-1BB
SLS-11-800B-2BB
SLS-11-800B-3BB
SLS-11-800C-0BB
SLS-11-800C-1BB
SLS-11-800C-2BB
SLS-11-800C-3BB
SLS-21-800-0BB
SLS-21-800-1BB
SLS-21-800-2BB
SLS-21-800-3BB
SLS-21-800A-0BB
SLS-21-800A-1BB
SLS-21-800A-2BB
SLS-21-800A-3BB
None
I / O
- / O
1
None
I / O
- / O
2
3
4
5
6
Tab #250
SPST
From 1.25 to 4.15N
None
I / O
- / O
Solder terminal bent
90 degrees.
None
I / O
- / O
Tab terminal (#250)
bent 90 degrees
None
I / O
- / O
Solder
DPST
From 2.95 to 7.85
None
I / O
- / O
Tab #250
[] Typical specifications
Items
Specifications
16A 250VAC (c-UL)
Rating (max)
16(6)/250~ (SEMKO,TUV,BEAB)
Contact resistance
100 milliohm
Insulation resistance
Withstanding voltage
Non-flame grade
500 megohm
2,000VAC 1min.
UL94V-0
Operating life
10,000 cycles
Operation temperature range
Storage temperature range
From -10 to +60 degree Celsius
From -20 to +70 degree Celsius
SHINMEI ELECTRIC CO., LTD.
SLS-800 Series
3/6
[] Dimensions
No
Unit : mm
Style
Circuit diagram
SLS-11-800-cde
1
The figure represents SLS-11-800-0de.
SLS-11-800A-cde
2
The figure represents SLS-11-800A-0de.
SHINMEI ELECTRIC CO., LTD.
SLS-800 Series
4/6
[] Dimensions
No
Unit : mm
Style
Circuit diagram
SLS-11-800B-cde
3
The figure represents SLS-11-800B-0de.
SLS-11-800C-cde
4
The figure represents SLS-11-800C-0de.
SHINMEI ELECTRIC CO., LTD.
SLS-800 Series
5/6
[] Dimensions
No
Unit : mm
Style
Circuit diagram
SLS-21-800-cde
5
The figure represents SLS-21-800-0de.
SLS-21-800A-cde
6
The figure represents SLS-21-800A-0de.
SHINMEI ELECTRIC CO., LTD.
SLS-800 Series
6/6
[] Dimensions
Unit : mm
Diagram of recommended locations for panel mounting holes (TOP VIEW)
In the tone of the switch and the case, the black is standards. Please consult about other tones.
[] Notes
1. The appearance and specifications of the product may be modified to improve its performance without prior notice.
2. This catalog shows only outline specifications. When using the product, please obtain formal specifications.
3. Regardless of the applications of these products being introduced in this catalog, when using them for equipments and
devices requiring a high degree of safety, respective manufacturers shall preserve the safety of the planned equipments
and devices by providing necessary protective and redundancy circuits and reconfirm if safety is being duly preserved.
4. The general-use switches cannot be washed. If the switch is washed, the lubricating oil on contacts and mechanical
portions may flow out and also detergent remains inside the switch, these may be the factors to cause intermittent
contact, insulation fault and withstanding voltage fault. If you need the cleaning, please select the washable switch.
5. Please confirm the performance on actual operation by simulation with actual environment for high reliability.
6. An unstable contact may occur if the switch current is lower than 500mA in using power switches, for such weak
current can not destroy the thin film on the contact surfaces, and be mindful of this point thoroughly in advance.
7. Note that if the stress more than specifications is applied to the switch during the operation, they might cause
deformation and defects in electrical performance. Care shall be taken not to apply abnormal stress to the switch.
8. Insert the switch body to the specified mounting surface and mount it horizontally. If not mounted horizontally, the
switch will malfunction.
9. In case of the soldering of the slide switches, it shall be made after the operating knob changes over completely. If the
soldering goes on in course of switching, operating force may fall greatly.
10. In manual soldering, consider that the abnormal pressure of the soldering iron shall not be applied to the tip of the
terminal as well do not apply any pressure for more than 1 minute after soldering.
11. If the switches are used in the following environment, the performance and the characteristics may have bad influence.
Under the environment of corrosive gas such as Cl2, H2S, NO2, SO2, NH3. At the place of the possibility of the
attachment of water-drop, moisture, salty water, oil, agent and organic solvent. Under the places of direct sunshine and
dusty environment.
12. If the switches are not used immediately, please store them as delivered in the following environment: with
temperature at -10 to +60 degree C, relative humidity 25 to 75% without water-drop and direct sunshine. There might
be the possibility of the chemical action by sulfur at silver plated terminal, which leads to the reduction of solderbility
and creation of the oxidization and the rust if the switches are stored in the high temperature and high humid
environment for a long time (approx. 6 months). After the break of the seal, the remaining of the switches shall be
stored in a plastic bag to separate them from the moisture and corrosive gas.
SHINMEI ELECTRIC CO., LTD.
相关型号:
©2020 ICPDF网 联系我们和版权申明