SLS-21-800-3BB [SHINMEI]

High power seesaw Switch;


型号：	SLS-21-800-3BB
厂家：	SHINMEI
描述：	High power seesaw Switch
文件：	总6页 (文件大小：142K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

http://www.shinmei-e. co. jp

High power seesaw Switch

SLS-800 Series

1/6

[] Features

<>It is a seesaw switch for a high current.

<>Sharp feeling.

<>Cadmium is not used for contact.

<>It suits insulation grade class II of EN61058-1.

<>3 point of contact interval mm or more.

<>Various safety standards are acquired. (C-UL, SEMKO, TUV)

<>160A in rushing into current correspondence.

<>The terminal shape prepares solder and tab terminal (#250).

<>There are two kinds of circuit diagrams, that is, SPST and DPST.

[] Applications

<>Data processing equipment and office equipment such as copiers, laser beam printer with

high power consumption.

[] Product number system

SLS-a1-800b-cde

a : Circuit diagram / 1:SPST

2:DPST

b : Terminal shaped / Blank : Solder terminal

A: Tab terminal (#250)

B: Solder terminal bent 90 degrees. (only SPST)

C: Tab terminal (#250) bent 90 degrees (only SPST)

c : Marking / 0 : None

1 : I / O

2 : - / O

3 :

d : Knob color / B : Black

W : White

R : Red

e : Case color / B : Black

W : White

R : Red

SHINMEI ELECTRIC CO., LTD.

SLS-800 Series

2/6

[] Products line

Products number

Circuit diagram

Terminal shaped

Solder

Marking

Operating force

SLS-11-800-0BB

SLS-11-800-1BB

SLS-11-800-2BB

SLS-11-800-3BB

SLS-11-800A-0BB

SLS-11-800A-1BB

SLS-11-800A-2BB

SLS-11-800A-3BB

SLS-11-800B-0BB

SLS-11-800B-1BB

SLS-11-800B-2BB

SLS-11-800B-3BB

SLS-11-800C-0BB

SLS-11-800C-1BB

SLS-11-800C-2BB

SLS-11-800C-3BB

SLS-21-800-0BB

SLS-21-800-1BB

SLS-21-800-2BB

SLS-21-800-3BB

SLS-21-800A-0BB

SLS-21-800A-1BB

SLS-21-800A-2BB

SLS-21-800A-3BB

None

I / O

- / O

None

I / O

- / O

Tab #250

SPST

From 1.25 to 4.15N

None

I / O

- / O

Solder terminal bent

90 degrees.

None

I / O

- / O

Tab terminal (#250)

bent 90 degrees

None

I / O

- / O

Solder

DPST

From 2.95 to 7.85

None

I / O

- / O

Tab #250

[] Typical specifications

Items

Specifications

16A 250VAC (c-UL)

Rating (max)

16(6)/250~ (SEMKO,TUV,BEAB)

Contact resistance

100 milliohm

Insulation resistance

Withstanding voltage

Non-flame grade

500 megohm

2,000VAC 1min.

UL94V-0

Operating life

10,000 cycles

Operation temperature range

Storage temperature range

From -10 to +60 degree Celsius

From -20 to +70 degree Celsius

SHINMEI ELECTRIC CO., LTD.

SLS-800 Series

3/6

[] Dimensions

Unit : mm

Style

Circuit diagram

SLS-11-800-cde

The figure represents SLS-11-800-0de.

SLS-11-800A-cde

The figure represents SLS-11-800A-0de.

SHINMEI ELECTRIC CO., LTD.

SLS-800 Series

4/6

[] Dimensions

Unit : mm

Style

Circuit diagram

SLS-11-800B-cde

The figure represents SLS-11-800B-0de.

SLS-11-800C-cde

The figure represents SLS-11-800C-0de.

SHINMEI ELECTRIC CO., LTD.

SLS-800 Series

5/6

[] Dimensions

Unit : mm

Style

Circuit diagram

SLS-21-800-cde

The figure represents SLS-21-800-0de.

SLS-21-800A-cde

The figure represents SLS-21-800A-0de.

SHINMEI ELECTRIC CO., LTD.

SLS-800 Series

6/6

[] Dimensions

Unit : mm

Diagram of recommended locations for panel mounting holes (TOP VIEW)

In the tone of the switch and the case, the black is standards. Please consult about other tones.

[] Notes

1. The appearance and specifications of the product may be modified to improve its performance without prior notice.

2. This catalog shows only outline specifications. When using the product, please obtain formal specifications.

3. Regardless of the applications of these products being introduced in this catalog, when using them for equipments and

devices requiring a high degree of safety, respective manufacturers shall preserve the safety of the planned equipments

and devices by providing necessary protective and redundancy circuits and reconfirm if safety is being duly preserved.

4. The general-use switches cannot be washed. If the switch is washed, the lubricating oil on contacts and mechanical

portions may flow out and also detergent remains inside the switch, these may be the factors to cause intermittent

contact, insulation fault and withstanding voltage fault. If you need the cleaning, please select the washable switch.

5. Please confirm the performance on actual operation by simulation with actual environment for high reliability.

6. An unstable contact may occur if the switch current is lower than 500mA in using power switches, for such weak

current can not destroy the thin film on the contact surfaces, and be mindful of this point thoroughly in advance.

7. Note that if the stress more than specifications is applied to the switch during the operation, they might cause

deformation and defects in electrical performance. Care shall be taken not to apply abnormal stress to the switch.

8. Insert the switch body to the specified mounting surface and mount it horizontally. If not mounted horizontally, the

switch will malfunction.

9. In case of the soldering of the slide switches, it shall be made after the operating knob changes over completely. If the

soldering goes on in course of switching, operating force may fall greatly.

10. In manual soldering, consider that the abnormal pressure of the soldering iron shall not be applied to the tip of the

terminal as well do not apply any pressure for more than 1 minute after soldering.

11. If the switches are used in the following environment, the performance and the characteristics may have bad influence.

Under the environment of corrosive gas such as Cl₂, H₂S, NO₂, SO₂, NH_3.At the place of the possibility of the

attachment of water-drop, moisture, salty water, oil, agent and organic solvent. Under the places of direct sunshine and

dusty environment.

12. If the switches are not used immediately, please store them as delivered in the following environment: with

temperature at -10 to +60 degree C, relative humidity 25 to 75% without water-drop and direct sunshine. There might

be the possibility of the chemical action by sulfur at silver plated terminal, which leads to the reduction of solderbility

and creation of the oxidization and the rust if the switches are stored in the high temperature and high humid

environment for a long time (approx. 6 months). After the break of the seal, the remaining of the switches shall be

stored in a plastic bag to separate them from the moisture and corrosive gas.

SHINMEI ELECTRIC CO., LTD.

相关型号：