SSS-13-4 [SHINMEI]
Detector Switch;型号: | SSS-13-4 |
厂家: | SHINMEI |
描述: | Detector Switch |
文件: | 总4页 (文件大小:173K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
http://www.shinmei-e.co. jp
Detector Switch
SSS-12 Series
1/4
[] Features
<>Dimensions 12.4x11x5.8mm,
<>Long ON travel (single side: about 27 degree)
<>Wide variation as printed wiring and lead wiring, etc. are possible.
<>Custom-made of the knob style is possible and please feel free to contact us beforehand.
SSS-12
SSS-23
SSS-28-3
SSS-36
SSS-13
SSS-13-4
[] Applications
<>CD, DVD, VTR <>Detection of operating direction
[] Product Number
SSS - [ ][ ] - [ ][ ]
Lever style and others (Custom No.)
Series No. (12 13 23 28 36 52)
Detector switch
[] Products Line
Operating
force
Travel
Recommended
Terminal
Mounting
Method
No
Products No.
Thickness of
P.C.B
Type
R direction
OFF
Total Travel
L direction
Duration
1
2
3
4
5
6
SSS-12
SSS-13
SSS-13-4
SSS-23
SSS-28-3
SSS-36
Straight
Straight
1.2mm to 1.6mm P.C.B mounting
1.2mm to 1.6mm
Screw
Screw
18
Light angle
1.6mm
-
MAX
Single side
36 degree
(single side
9 degree)
0.69N
For lead
Screw
wiring
Straight
Straight
1.6mm
1mm
Snap in
Snap in
[] Typical Specifications
Item
Specifications
Circuit-Position
Type
1 pole - 2 positions
Normally Open
100mA 12V DC
Ratings (max.) ( Resistive load )
Contact resistance
100 milliohm max. (Initial)
50,000 cycles
Operating life
Operating temperature range
Storage temperature range
-20 to +70 degree Celsius
-40 to +85 degree Celsius
SHINMEI ELECTRIC CO., LTD.
SSS-12 Series
2/4
[] Dimensions
No
Unit : mm
P.C.B mounting hole Dimensions
Terminal style (TOP VIEW)
Terminal style (a)
Style
SSS-12
1
P.C.B
SSS-13
Terminal style (a)
2
P.C.B
P.C.B
SSS-13-4
3
SHINMEI ELECTRIC CO., LTD.
SSS-12 Series
3/4
[] Dimensions
No
Unit : mm
P.C.B mounting hole Dimensions
Style
Terminal style (TOP VIEW)
Terminal style (a)
SSS-23
4
P.C.B
SSS-28-3
Terminal style (a)
5
P.C.B
SSS-36
Terminal style (a)
6
P.C.B
SHINMEI ELECTRIC CO., LTD.
SSS-12 Series
4/4
[] Circuit diagram
[] Notes
1.
2.
3.
4.
5.
6.
The appearance and specifications of the product may be modified to improve its performance without prior notice.
This catalog shows only outline specifications. When using the product, please obtain formal specifications.
Please see appendix [Cautions in Using Switches ].
This lever switch is not washable.
Soldering shall be done with lever at free position and take care not to attach flux on plastic portion.
Note that if the stress is applied to the terminals during soldering, they might cause deformation and defects in
electrical performance.
7.
8.
In manual soldering, consideration should be given to apply the soldering iron to the tip of the terminal so that unusual
pressure is not applied to the terminal
In case circuit and software design consideration against chattering and bouncing shall be taken as below.
Read a few times. (Ex. 5ms for 5 times)
Set delay time.
Set integral circuit.
9.
As to threshold voltage, center setting is recommended.
10. Care shall be taken not to apply stress to the body of switch as it may affect the performance.
11. Please confirm the performance on actual operation by simulation with actual environment environments for high
reliability.
SHINMEI ELECTRIC CO., LTD.
相关型号:
©2020 ICPDF网 联系我们和版权申明