SW1AG-530-102 [SHINMEI]
Lever-type Detector Switches;型号: | SW1AG-530-102 |
厂家: | SHINMEI |
描述: | Lever-type Detector Switches |
文件: | 总3页 (文件大小:121K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
http://www.shinmei-e.co. jp
Lever-type Detector Switches
SW1AG-530 / -531 Series
1/3
[] Features
<>Miniaturized for space saving design.
<>Superior reliability at micro-current by employing a sliding contact.
<>This is a compact detector switch which is possible to detect 2 direction.
<>Custom-made of the lever style is possible and please feel free to contact us beforehand..
[] Applications
<>Mechatronic detection for audio and VCR Digital camera CD-ROM DVD units.
Actual size
Zoom
[] Products Number System
SW 1 AG – 530 - [ ][ ]
Difference version , etc.
Series
Contact arrangement
Pole
Detector switch
[] Products Line
Mounting
Terminal
Type
No
Products No
SW1AG-530-100
SW1AG-530-102
SW1AG-531-100
SW1AG-531-102
Pole
1
Position
1
Method
1
2
Screw
For lead wiring
3
4
[] Typical Specifications
Item
Specification
Ratings (max.)
0.1 to 10mA 3 to 5V DC (Resistive load)
1 ohm max.
Contact resistance
Insulation resistance
Withstanding voltage
Operating life with load
100 megohm min. 100V DC
100V AC for 1min.
100,000 cycles
Operating force
0.3N max.
SHINMEI ELECTRIC CO., LTD.
SW1AG-530 / -531 Series
2/3
[] Dimensions
Unit : mm
P.C.B reference Land Dimensions
No
Style
Circuit diagram
(TOP VIEW)
SW1AG-530-100
SW1AG-530-102
SW1AG-531-100
1
2
3
SHINMEI ELECTRIC CO., LTD.
SW1AG-530 / -531 Series
3/3
[] Dimensions
Unit : mm
P.C.B reference Land Dimensions
No
Style
Circuit diagram
(TOP VIEW)
SW1AG-531-102
4
[] Notes
1.
2.
3.
4.
5.
6.
The appearance and specifications of the product may be modified to improve its performance without prior notice.
This catalog shows only outline specifications. When using the product, please obtain formal specifications.
Please see appendix [Cautions in Using Switches ].
This switch is not washable.
Soldering shall be done with actuator at free position and take care not to attach flux on plastic portion.
Note that if the stress is applied to the terminals during soldering, they might cause deformation and defects in
electrical performance.
In manual soldering, consideration should be given to apply the soldering iron to the tip of the terminal so that
unusual pressure is not applied to the terminal.
In case circuit and software design consideration against chattering and bouncing shall be taken as below.
Read a few times. (Ex. 5ms for 5 times)
Set delay time.
Set integral circuit.
As to threshold voltage, center setting is recommended.
7.
8.
9.
10. Care shall be taken not to apply stress to the body of switch as it may affect the performance.
11. Please confirm the performance on actual operation by simulation with actual environment environments for high
reliability.
SHINMEI ELECTRIC CO., LTD.
相关型号:
©2020 ICPDF网 联系我们和版权申明