SFDG33AQ102 [SHOULDER]
Passive Filter;型号: | SFDG33AQ102 |
厂家: | SHOULDER ELECTRONICS LIMITED. |
描述: | Passive Filter |
文件: | 总12页 (文件大小:784K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SHOULDER ELECTRONICS LIMITED
SAW Components Data Sheet
PRODUCT 产 品: SAW FILTER
MODEL NO 型 号: SFDG33AQ102
PREPARED编 制:
CHECKED 审 核:
APPROVED 批 准:
DATE
日 期: 2007-01-25
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 1
1. DEFINITION
1-1. PART No.
1-2. APPLICATION: UMTS Band(IV) Tx
2. PRECAUTIONS
2-1. This device should not be used in any type of fluid such as water, oil, organic solvent, etc.
2-2. This is a hermetic device.
MSL(Moisture Sensitive Level) is the '2A' level.
2-3. Ultrasonic cleaning shall be avoided.
2-4. Isopropyl Alcohol and Ethyl Alcohol can be used for cleaning. Contact us before using
other cleaning solvents than above
2-5. This is an electrostatic sensitive device.
Please avoid static voltage during operation and storage.
2-6. Sudden change of temperature shall be avoided, deterioration of the characteristics can
occur.
2-7. If any malfunction due to designing or manufacturing which is out of specification occurs
within one year after the products have been delivered, the maker should exchange the
defective products.
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 2
3. OUTLINE DRAWING & DIMENSIONS
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 3
4. MARKING
4-1. c A X X X
- The 1st, 2nd character 'cA' indicates the model name of SAW Filter SFDG33AQ102.
- The 3rd character 'X' indicates the year and the month of manufacture.
This rotates by the 3 years.
- The 4th, 5th character 'X' indicates Lot No.
4-2.●
- This symbol indicates input pin 1.
- This indicates the producing center
○: China, ●: Korea
4-3. Marking: Laser Marking
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 4
5. PERFORMANCE
5-1. MAXIMUM RATINGS
5-2. ELECTRICAL CHARACTERISTICS
5-2-1. TABLE
5-2-2. TEST FIXTURE
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 5
5-2-3. GRAPH
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 6
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 7
6. RELIABILITY
6-1. ENGINEERING SAMPLE FLOW CHART
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 8
6-2. TEST ITEM & CONDITION
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 9
7. REFLOW CONDITION
8. RECOMMENDED PCB DIMENSIONS
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 10
9. PACKING
9-1. DIMENSIONS
- Carrier Tape
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 11
10. TAPE SPECIFICATIONS
10-1. Tensile Strength of Carrier Tape: 4.4N/mm width
10-2. Top Cover Tape Adhesion (See the below figure)
- pull of angle: 0~15 degree
- speed: 300mm/min.
- force:
20~70g
Http://www.shoulder.cn
SHOULDER ELECTRONICS LIMITED
Page: 12
相关型号:
©2020 ICPDF网 联系我们和版权申明