S-1111B43MC-NZCTFG 概述
HIGH RIPPLE-REJECTION LOW DROPOUT 高纹波抑制率低压差
S-1111B43MC-NZCTFG 数据手册
通过下载S-1111B43MC-NZCTFG数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Rev.4.1_00
HIGH RIPPLE-REJECTION LOW DROPOUT
CMOS VOLTAGE REGULATOR
S-1111/1121 Series
The S-1111/1121 Series is a positive voltage
regulator with a low dropout voltage, high output
voltage accuracy, and low current consumption
developed based on CMOS technology.
A built-in low on-resistance transistor provides a
low dropout voltage and large output current, and a
built-in overcurrent protector prevents the load
current from exceeding the current capacitance of
the output transistor. An ON/OFF circuit ensures a
long battery life, and a small SOT-23-5 package
realize high-density mounting. The lineup includes
the S-1111 and S-1121 Series, which differ in pin
configuration.
Features
1.5 V to 5.5 V, selectable in 0.1 V steps.
• High-accuracy output voltage: ±1.0%
• Output voltage:
• Low dropout voltage:
200 mV typ. (3.0 V output product, IOUT = 100 mA)
During operation: 35 μA typ., 65 μA max.
During shutdown: 0.1 μA typ., 1.0 μA max.
• High peak current capability: 150 mA output is possible (at VIN ≥ VOUT(S) + 1.0 V)*1
• Low current consumption:
Ensures long battery life.
70 dB typ. (at 1.0 kHz)
Overcurrent of output transistor can be restricted.
SOT-23-5
• Built-in ON/OFF circuit:
• High ripple rejection:
• Built-in overcurrent protector:
• Small package:
• Lead-free products
*1. Attention should be paid to the power dissipation of the package when the output current is large.
Applications
• Power supply for battery-powered devices
• Power supply for personal communication devices
• Power supply for home electric/electronic appliances
• Power supply for cellular phones
Package
Package Name
Drawing Code
Tape
Package
MP005-A
Reel
MP005-A
SOT-23-5
MP005-A
1
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
VOUT
Block Diagram
*1
VIN
Overcurrent
protector
+
ON/OFF
ON/OFF
circuit
−
Reference
voltage circuit
VSS
*1. Parasitic diode
Figure 1
2
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Product Name Structure
• The product types and output voltage for the S-1111/1121 Series can be selected at the user’s request.
Refer to the “Product name” for the meanings of the characters in the product name and “Product name
list” for the full product names.
1. Product name (S-1111 Series)
S-1111
x
xx
MC
–
xxx
TF
G
IC direction in tape specifications*1
Product name (abbreviation)*2
Package name (abbreviation)
MC: SOT-23-5
Output voltage
15 to 55
(e.g., when the output voltage is 1.5 V,
it is expressed as 15.)
Product type*3
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the taping specifications at the end of this book.
*2. Refer to the “Product name list”.
*3. Refer to 3. Shutdown (ON/OFF pin) in the “Operation”.
3
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
2. Product name list (S-1111 Series)
Table 1
Output Voltage
1.5V±1.0%
1.6V±1.0%
1.7V±1.0%
1.8V±1.0%
1.9V±1.0%
2.0V±1.0%
2.1V±1.0%
2.2V±1.0%
2.3V±1.0%
2.4V±1.0%
2.5V±1.0%
2.6V±1.0%
2.7V±1.0%
2.8V±1.0%
2.9V±1.0%
3.0V±1.0%
3.1V±1.0%
3.2V±1.0%
3.3V±1.0%
3.4V±1.0%
3.5V±1.0%
3.6V±1.0%
3.7V±1.0%
3.8V±1.0%
3.9V±1.0%
4.0V±1.0%
4.1V±1.0%
4.2V±1.0%
4.3V±1.0%
4.4V±1.0%
4.5V±1.0%
4.6V±1.0%
4.7V±1.0%
4.75V±1.0%
4.8V±1.0%
4.9V±1.0%
5.0V±1.0%
5.1V±1.0%
5.2V±1.0%
5.3V±1.0%
5.4V±1.0%
5.5V±1.0%
SOT-23-5
S-1111B15MC-NYATFG
S-1111B16MC-NYBTFG
S-1111B17MC-NYCTFG
S-1111B18MC-NYDTFG
S-1111B19MC-NYETFG
S-1111B20MC-NYFTFG
S-1111B21MC-NYGTFG
S-1111B22MC-NYHTFG
S-1111B23MC-NYITFG
S-1111B24MC-NYJTFG
S-1111B25MC-NYKTFG
S-1111B26MC-NYLTFG
S-1111B27MC-NYMTFG
S-1111B28MC-NYNTFG
S-1111B29MC-NYOTFG
S-1111B30MC-NYPTFG
S-1111B31MC-NYQTFG
S-1111B32MC-NYRTFG
S-1111B33MC-NYSTFG
S-1111B34MC-NYTTFG
S-1111B35MC-NYUTFG
S-1111B36MC-NYVTFG
S-1111B37MC-NYWTFG
S-1111B38MC-NYXTFG
S-1111B39MC-NYYTFG
S-1111B40MC-NYZTFG
S-1111B41MC-NZATFG
S-1111B42MC-NZBTFG
S-1111B43MC-NZCTFG
S-1111B44MC-NZDTFG
S-1111B45MC-NZETFG
S-1111B46MC-NZFTFG
S-1111B47MC-NZGTFG
-
S-1111B48MC-NZHTFG
S-1111B49MC-NZITFG
S-1111B50MC-NZJTFG
S-1111B51MC-NZKTFG
S-1111B52MC-NZLTFG
S-1111B53MC-NZMTFG
S-1111B54MC-NZNTFG
S-1111B55MC-NZOTFG
Remark Please contact our sales office for type A products.
4
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
3. Product name (S-1121 Series)
S-1121 xx MC
x
–
xxx
TF
G
IC direction in tape specifications*1
Product name (abbreviation)*2
Package name (abbreviation)
MC: SOT-23-5
Output voltage
15 to 55
(e.g., when the output voltage is 1.5 V,
it is expressed as 15.)
Product type*3
A: ON/OFF pin negative logic
B: ON/OFF pin positive logic
*1. Refer to the taping specifications at the end of this book.
*2. Refer to the “Product name list”.
*3. Refer to 3. Shutdown pin (ON/OFF pin) in the “Operation”.
5
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
4. Product name list (S-1121 Series)
Table 2
Output Voltage
1.5V±1.0%
1.6V±1.0%
1.7V±1.0%
1.8V±1.0%
1.9V±1.0%
2.0V±1.0%
2.1V±1.0%
2.2V±1.0%
2.3V±1.0%
2.4V±1.0%
2.5V±1.0%
2.6V±1.0%
2.7V±1.0%
2.8V±1.0%
2.9V±1.0%
3.0V±1.0%
3.1V±1.0%
3.2V±1.0%
3.3V±1.0%
3.4V±1.0%
3.5V±1.0%
3.6V±1.0%
3.7V±1.0%
3.8V±1.0%
3.9V±1.0%
4.0V±1.0%
4.1V±1.0%
4.2V±1.0%
4.3V±1.0%
4.4V±1.0%
4.5V±1.0%
4.6V±1.0%
4.7V±1.0%
4.75V±1.0%
4.8V±1.0%
4.9V±1.0%
5.0V±1.0%
5.1V±1.0%
5.2V±1.0%
5.3V±1.0%
5.4V±1.0%
5.5V±1.0%
SOT-23-5
S-1121B15MC-N2ATFG
S-1121B16MC-N2BTFG
S-1121B17MC-N2CTFG
S-1121B18MC-N2DTFG
S-1121B19MC-N2ETFG
S-1121B20MC-N2FTFG
S-1121B21MC-N2GTFG
S-1121B22MC-N2HTFG
S-1121B23MC-N2ITFG
S-1121B24MC-N2JTFG
S-1121B25MC-N2KTFG
S-1121B26MC-N2LTFG
S-1121B27MC-N2MTFG
S-1121B28MC-N2NTFG
S-1121B29MC-N2OTFG
S-1121B30MC-N2PTFG
S-1121B31MC-N2QTFG
S-1121B32MC-N2RTFG
S-1121B33MC-N2STFG
S-1121B34MC-N2TTFG
S-1121B35MC-N2UTFG
S-1121B36MC-N2VTFG
S-1121B37MC-N2WTFG
S-1121B38MC-N2XTFG
S-1121B39MC-N2YTFG
S-1121B40MC-N2ZTFG
S-1121B41MC-N3ATFG
S-1121B42MC-N3BTFG
S-1121B43MC-N3CTFG
S-1121B44MC-N3DTFG
S-1121B45MC-N3ETFG
S-1121B46MC-N3FTFG
S-1121B47MC-N3GTFG
S-1121B4HMC-N3PTFG
S-1121B48MC-N3HTFG
S-1121B49MC-N3ITFG
S-1121B50MC-N3JTFG
S-1121B51MC-N3KTFG
S-1121B52MC-N3LTFG
S-1121B53MC-N3MTFG
S-1121B54MC-N3NTFG
S-1121B55MC-N3OTFG
Remark Please contact our sales office for type A products.
6
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Pin Configuration
Table 3
SOT-23-5
Top view
(S-1111 Series)
Description
Input voltage pin
GND pin
Shutdown pin
No connection
Output voltage pin
Pin No.
Symbol
VIN
VSS
5
4
1
2
3
4
5
ON/OFF
NC*1
VOUT
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
1
2
3
Table 4
(S-1121 Series)
Description
Output voltage pin
GND pin
Input voltage pin
Shutdown pin
No connection
Pin No.
Symbol
VOUT
VSS
1
2
3
4
5
Figure 2
VIN
ON/OFF
NC*1
*1. The NC pin is electrically open.
The NC pin can be connected to VIN or VSS.
7
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Absolute Maximum Ratings
Table 5
(Ta = 25 °C unless otherwise specified)
Item
Symbol
VIN
VON/OFF
VOUT
Absolute Maximum Rating
Unit
V
V
Input voltage
VSS − 0.3 to VSS + 7
VSS − 0.3 to VIN + 0.3
VSS − 0.3 to VIN + 0.3
300 (When not mounted on board)
600*1
Output voltage
V
Power dissipation
mW
mW
°C
°C
PD
Operating ambient temperature
Storage temperature
Topr
Tstg
−40 to +85
−40 to +125
*1. When mounted on board
[Mounted on board]
(1) Board size : 114.3 mm × 76.2 mm × t1.6 mm
(2) Board name : JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer
physical damage. These values must therefore not be exceeded under any conditions.
700
600
500
400
300
200
100
0
100
150
50
0
Ambient temperature (Ta) [°C]
Figure 3 Power Dissipation of Package (When Mounted on Board)
8
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Electrical Characteristics
Table 6
(Ta = 25 °C unless otherwise specified)
Test
Circuit
Item
Symbol
VOUT(E)
Conditions
Min.
Typ.
Max.
Unit
VOUT(S)
VOUT(S)
VOUT(S)
Output voltage*1
VIN
VIN
=
VOUT(S)
+
1.0 V, IOUT
1.0 V
= 30 mA
V
1
×
0.99
×
1.01
Output current*2
Dropout voltage*3
IOUT
≥
=
VOUT(S)
+
150*5
⎯
⎯
⎯
mA
V
3
1
1
1
1
1
Vdrop
IOUT
100 mA
1.5 V
≤
≤
≤
≤
≤
VOUT(S)
VOUT(S)
VOUT(S)
VOUT(S)
VOUT(S)
≤
≤
≤
≤
≤
1.9 V
2.4 V
2.7 V
3.3 V
5.5 V
0.60
0.35
0.24
0.20
0.17
1.40
0.70
0.35
0.30
0.26
2.0 V
2.5 V
2.8 V
3.4 V
⎯
⎯
⎯
⎯
V
V
V
V
ΔVOUT1
VOUT(S)
IOUT 30 mA
VIN
1.0 mA
+ 0.5 V ≤ VIN ≤ 6.5 V,
Line regulation
Load regulation
⎯
⎯
⎯
⎯
0.05
20
0.2
40
⎯
% / V
1
1
1
2
=
=
ΔVIN•VOUT
VOUT2
ΔVOUT
VOUT(S)
+
1.0 V,
80 mA
1.0 V, IOUT
85
Δ
mV
≤
IOUT
≤
Output voltage
VIN
=
°
VOUT(S)
Ta
VOUT(S)
+
≤
=
10 mA,
ppm
/ °C
±100
temperature coefficient*4
−40
C
≤
°
C
ΔTa•VOUT
Current consumption
during operation
Current consumption
during shutdown
Input voltage
VIN
=
+
1.0 V, ON/OFF pin
1.0 V, ON/OFF pin
⎯
=
=
ON,
ISS1
35
65
μA
no load
VIN VOUT(S)
no load
=
+
OFF,
ISS2
VIN
⎯
0.1
⎯
1.0
6.5
⎯
1
2
⎯
4
2.0
1.5
V
V
Shutdown pin
input voltage “H”
Shutdown pin
input voltage “L”
Shutdown pin
input current “H”
Shutdown pin
VSH
VIN
VIN
VIN
=
=
=
VOUT(S)
VOUT(S)
+
+
1.0 V, RL
1.0 V, RL
=
=
1.0 k
1.0 k
Ω
Ω
⎯
VSL
ISH
ISL
⎯
⎯
⎯
0.3
0.1
0.1
⎯
V
4
4
4
5
3
6.5 V, VON/OFF
6.5 V, VON/OFF
=
=
6.5 V
0 V
−
0.1
0.1
μ
A
A
VIN
VIN
=
=
−
⎯
μ
input current “L”
VOUT(S)
0.5 Vrms, IOUT
VOUT(S) 1.0 V, ON/OFF pin
0 V
+
1.0 V, f
=
1.0 kHz,
RR
Ishort
Ripple rejection
⎯
⎯
70
dB
Δ
Vrip
VIN
VOUT
=
= 30 mA
=
+
=
ON,
Short-circuit current
250
⎯
mA
=
*1. VOUT(S): Specified output voltage
VOUT(E): Actual output voltage at the fixed load
The output voltage when fixing IOUT(= 30 mA) and inputting VOUT(S) + 1.0 V
*2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current.
*3. Vdrop = VIN1 − (VOUT3 × 0.98)
VOUT3 is the output voltage when VIN = VOUT(S) + 1.0 V and IOUT = 100 mA.
VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input
voltage.
*4. The change in temperature [mV/°C] is calculated using the following equation.
ΔVOUT
ΔTa
ΔVOUT
ΔTa • VOUT
*2
*3
[
mV/°C
]
*1 = VOUT(S)
[
V
]
×
[
ppm/°C
]
÷1000
*1. The change in temperature of the output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
*5. The output current can be at least this value.
Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the
power dissipation of the package when the output current is large.
This specification is guaranteed by design.
9
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Test Circuits
1.
+
A
VIN
VOUT
VSS
+
V
ON/OFF
Set to
power ON
Figure 4
2.
+
A
VIN
VOUT
VSS
ON/OFF
Set to
V
IN or GND
Figure 5
3.
+
VIN
VOUT
A
+
V
ON/OFF
VSS
Set to
power ON
Figure 6
4.
VOUT
VSS
VIN
+
+
RL
A
V
ON/OFF
Figure 7
5.
VIN
VOUT
VSS
+
V
ON/OFF
RL
Set to
Power ON
Figure 8
10
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Standard Circuit
Output
Input
VIN
VOUT
*2
*1
ON/OFF
CL
CIN
VSS
GND
Single GND
*1. CIN is a capacitor for stabilizing the input.
*2. A tantalum capacitor (2.2 μF or more) can be used.
Figure 9
Caution The above connection diagram and constant will not guarantee successful operation.
Perform thorough evaluation using the actual application to set the constant.
Application Conditions
Input capacitor (CIN):
1.0 μF or more
Output capacitor (CL): 2.2 μF or more (tantalum capacitor)
Caution A general series regulator may oscillate, depending on the external components selected.
Check that no oscillation occurs with the application using the above capacitor.
11
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Explanation of Terms
1. Low dropout voltage regulator
The low dropout voltage regulator is a voltage regulator whose dropout voltage is low due to its built-in
low on-resistance transistor.
2. Output voltage (VOUT
)
The accuracy of the output voltage is ensured at ±1.0% under the specified conditions of fixed input
voltage*1, fixed output current, and fixed temperature.
*1. Differs depending the product.
Caution If the above conditions change, the output voltage value may vary and exceed the
accuracy range of the output voltage. Please see the electrical characteristics and
attached characteristics data for details.
⎛
ΔVOUT1
ΔVIN • VOUT
⎞
3. Line regulation ⎜
⎟
⎟
⎜
⎝
⎠
Indicates the dependency of the output voltage on the input voltage. That is, the value shows how much
the output voltage changes due to a change in the input voltage with the output current remaining
unchanged.
4. Load regulation (ΔVOUT2
)
Indicates the dependency of the output voltage on the output current. That is, the value shows how
much the output voltage changes due to a change in the output current with the input voltage remaining
unchanged.
5. Dropout voltage (Vdrop
)
Indicates the difference between the input voltage VIN1, which is the input voltage (VIN) at the point where
the output voltage has fallen to 98% of the output voltage value VOUT3 after VIN was gradually decreased
from VIN = VOUT(S) + 1.0 V, and the output voltage at that point (VOUT3 × 0.98).
Vdrop = VIN1 − (VOUT3 × 0.98)
12
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
⎛
ΔVOUT
ΔTa •VOUT
⎞
6.
Temperatur e coefficien t of output voltage ⎜
⎟
⎟
⎜
⎝
⎠
The shadowed area in Figure 10 is the range where VOUT varies in the operating temperature range
when the temperature coefficient of the output voltage is ±100 ppm/°C.
Ex. S-1111/1121B28 Typ.
VOUT
[V]
+0.28 mV / °C
*1
VOUT(E)
−0.28 mV / °C
−40
25
Ta [°C]
85
*1.
VOUT(E) is the value of the output voltage measured at 25°C.
Figure 10
A change in the temperature of the output voltage [mV/°C] is calculated using the following equation.
ΔVOUT
ΔTa
ΔVOUT
ΔTa • VOUT
*2
*3
[
mV/°C
]
*1 = VOUT(S)
[
V
]
×
[
ppm/°C
]
÷1000
*1. Change in temperature of output voltage
*2. Specified output voltage
*3. Output voltage temperature coefficient
13
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Operation
1. Basic operation
Figure 11 shows the block diagram of the S-1111/1121 Series.
The error amplifier compares the reference voltage (Vref) with Vfb, which is the output voltage resistance-
divided by feedback resistors Rs and Rf. It supplies the output transistor with the gate voltage necessary
to ensure a certain output voltage free of any fluctuations of input voltage and temperature.
VIN
*1
Current
supply
Error
amplifier
VOUT
−
+
Vref
Rf
Vfb
Reference voltage
circuit
Rs
VSS
*1. Parasitic diode
Figure 11
2. Output transistor
The S-1111/1121 Series uses a low on-resistance P-channel MOS FET as the output transistor.
Be sure that VOUT does not exceed VIN + 0.3 V to prevent the voltage regulator from being damaged due
to inverse current flowing from VOUT pin through a parasitic diode to VIN pin.
14
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
3. Shutdown pin (ON/OFF pin)
This pin starts and stops the regulator.
When the ON/OFF pin is set to the shutdown level, the operation of all internal circuits stops, and the built-
in P-channel MOS FET output transistor between the VIN pin and VOUT pin is turned off to substantially
reduce the current consumption. The VOUT pin becomes the VSS level due to the internally divided
resistance of several hundreds kΩ between the VOUT pin and VSS pin.
The structure of the ON/OFF pin is as shown in Figure 12. Since the ON/OFF pin is neither pulled down
nor pulled up internally, do not use it in the floating state. In addition, note that the current consumption
increases if a voltage of 0.3 V to VIN – 0.3 V is applied to the ON/OFF pin. When the ON/OFF pin is not
used, connect it to the VSS pin if the logic type is “A” and to the VIN pin if it is “B”.
Table 7
Logic Type
ON/OFF Pin
“L”: Power on
“H”: Power off
“L”: Power off
“H”: Power on
Internal Circuits
Operating
Stopped
VOUT Pin Voltage
Set value
Current Consumption
A
A
B
B
ISS1
ISS2
ISS2
ISS1
VSS level
VSS level
Set value
Stopped
Operating
VIN
ON/OFF
VSS
Figure 12
Selection of Output Capacitor (CL)
The S-1111/1121 Series performs phase compensation using the internal phase compensator in the IC and the
ESR (Equivalent Series Resistance) of the output capacitor to enable stable operation independent of changes
in the output load. Therefore, always place a capacitor (CL) of 2.2 μF or more between VOUT and VSS pins.
For stable operation of the S-1111/1121 Series, it is essential to employ a capacitor whose ESR is within an
optimum range. Using a capacitor whose ESR is outside the optimum range (approximately 0.5 to 5 Ω),
whether larger or smaller, may cause an unstable output, resulting in oscillation. For this reason, a tantalum
electrolytic capacitor is recommended.
When a ceramic capacitor or an OS capacitor with a low ESR is used, it is necessary to connect an additional
resistor that serves as the ESR in series with the output capacitor. The required resistance value is
approximately 0.5 to 5 Ω, which varies depending on the usage conditions, so perform sufficient evaluation for
selection. Ordinarily, around 1.0 Ω is recommended.
Note that an aluminum electrolytic capacitor may increase the ESR at a low temperature, causing oscillation.
When using this kind of capacitor, perform thorough evaluation, including evaluation of temperature
characteristics.
15
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Precautions
• Wiring patterns for the VIN, VOUT and GND pins should be designed so that the impedance is low.
When mounting an output capacitor between the VOUT and VSS pins (CL) and a capacitor for stabilizing
the input between VIN and VSS pins (CIN), the distance from the capacitors to these pins should be as
short as possible.
• Note that the output voltage may increase when a series regulator is used at low load current (1.0 mA or
less).
• This IC performs phase compensation by using an internal phase compensator and the ESR of an
output capacitor. Therefore, always place a capacitor of 2.2 μF or more between VOUT and VSS pins.
A tantalum type capacitor is recommended. Moreover, to secure stable operation of the S-1111/1121
Series, it is necessary to employ a capacitor with an ESR within an optimum range (0.5 to 5 Ω). Using a
capacitor whose ESR is outside the optimum range (approximately 0.5 to 5 Ω), whether larger or
smaller, may cause an unstable output, resulting in oscillation. Perform sufficient evaluation under the
actual usage conditions for selection, including evaluation of temperature characteristics.
• The voltage regulator may oscillate when the impedance of the power supply is high and the input
capacitor is small or an input capacitor is not connected.
• The application conditions for the input voltage, output voltage, and load current should not exceed the
package power dissipation.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in
electrostatic protection circuit.
• In determining the output current, attention should be paid to the output current value specified in Table
6 in the electrical characteristics and footnote *5 of the table.
• SII claims no responsibility for any disputes arising out of or in connection with any infringement by
products including this IC of patents owned by a third party.
16
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Characteristics (Typical Data)
Remark The following, which describes the S-1111 Series as the typical product, shows typical data
common to the S-1121 Series.
(1) Output Voltage vs. Output current (when load current increases)
S-1111B15 (Ta = 25 °C)
S-1111B30 (Ta = 25 °C)
2.5
4
3.5
3
2.5
2
2
4.0 V
2.0 V
1.5
1
6.5 V
VIN = 1.8 V
1.5
0.5
1
0.5
0
6.5 V
3.5 V
2.5 V
500
V
IN = 3.3 V
0
0
100
200
300
400
600
0
100 200 300 400 500 600
IOUT [mA]
IOUT [mA]
S-1111B50 (Ta = 25 °C)
6
5
6.5 V
4
3
2
1
0
6.0 V
Remark In determining the output current,attention
should be paid to the following.
1) The minimum output current value
and footnote *5 in the electrical
characteristics
5.5 V
VIN = 5.3 V
0
100
200
300
400
500
600
IOUT [mA]
2) The package power dissipation
(2) Output voltage vs. Input voltage
S-1111B15 (Ta = 25 °C)
S-1111B30 (Ta = 25 °C)
1.6
3.05
50 mA
50 mA
IOUT = 1 mA
IOUT = 1 mA
3
2.95
2.9
1.55
1.5
30 mA
30 mA
80 mA
80 mA
1.45
1.4
2.85
2.8
1
1.5
2
2.5
3
3.5
2.5
3
3.5
4
4.5
5
VIN [V]
VIN [V]
S-1111B50 (Ta = 25 °C)
5.1
5.08
5.06
5.04
5.02
5
4.98
4.96
4.94
4.92
4.9
IOUT = 1 mA
30 mA
50 mA
80 mA
4.5
5
5.5
VIN [V]
6
6.5
7
17
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
(3) Dropout voltage vs. Output current
S-1111B15
S-1111B30
0.45
0.4
0.35
0.3
0.3
0.25
0.2
25°C
85°C
85°C
25°C
0.25
0.2
0.15
0.1
0.05
0
0.15
0.1
-40°C
-40°C
150
0.05
0
0
0
50
100
150
200
50
100
200
IOUT [mA]
IOUT [mA]
S-1111B50
0.25
0.2
0.15
0.1
85°C
25°C
−40°C
0.05
0
0
50
100
150
200
IOUT [mA]
(4) Dropout voltage vs. Set output voltage
0.4
150 mA
100 mA
0.35
0.3
0.25
0.2
0.15
0.1
50 mA
30 mA
10 mA
0.05
0
0
1
2
3
4
5
6
7
VOTA [V]
18
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
(5) Output voltage vs. Ambient temperature
S-1111B15
S-1111B30
1.6
3.1
1.55
1.5
3.05
3
1.45
2.95
2.9
1.4
-40 -20
0
20
40
60
80 100
-40 -20
0
20
40
60
80 100
Ta [°C]
Ta [°C]
S-1111B50
5.1
5.08
5.06
5.04
5.02
5
4.98
4.96
4.94
4.92
4.9
-40 -20
0
20 40 60 80 100
Ta [°C]
(6) Current consumption vs. Input voltage
S-1111B15
S-1111B30
45
40
35
30
25
20
15
10
5
45
40
35
30
25
20
15
10
5
25°C
25°C
85°C
85°C
−40°C
−40°C
0
0
0
0
2
4
6
8
2
4
6
8
VIN [V]
VIN [V]
S-1111B50
45
40
35
30
25
20
15
10
5
85°C
25°C
−40°C
0
0
2
4
6
8
VIN [V]
19
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
(7) Ripple rejection
S-1111B15 (Ta = 25 °C)
VIN = 2.5 V, COUT = 2.2 μF
S-1111B30 (Ta = 25 °C)
VIN = 4.0 V, COUT = 2.2 μF
100
80
100
80
IOUT = 1 mA
IOUT = 1 mA
60
40
20
0
60
40
20
0
30 mA
30 mA
50 mA
100 k
50 mA
100 k
10
100
1 k
10 k
1 M
10
100
1 k
10 k
1 M
Frequency [Hz]
Frequency [Hz]
S-1111B50 (Ta = 25 °C)
VIN = 6.0 V, COUT = 2.2 μF
100
80
IOUT = 1 mA
60
40
20
0
30 mA
50 mA
100 k
10
100
1 k
10 k
1 M
Frequency [Hz]
20
Seiko Instruments Inc.
HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR
S-1111/1121 Series
Rev.4.1_00
Reference Data
(1) Input transient response characteristics
IOUT = 30 mA, tr = tf = 5.0 μs, COUT = 2.2 μF, CIN = 0 μF
3.025
IOUT = 30 mA, tr = tf = 5.0 μs, COUT = 4.7 μF, CIN = 0 μF
6
5
3.025
6
5
3.02
3.02
3.015
4
3
2
1
0
3.015
4
3
2
1
0
VIN
V
IN
3.01
3.01
3.005
3
VOUT
V
OUT
3.005
3
2.995
2.995
-20
0
20 40
60
80 100 120 140 160 180
-20
0
20 40 60 80 100 120 140 160 180
t [μs]
t [μs]
(2) Load transient response characteristics
VIN = 4.0 V, COUT = 2.2 μF, CIN = 1.0 μF,
IOUT = 50↔100 mA
VIN = 4.0 V, COUT = 4.7 μF, CIN = 1.0 μF,
IOUT = 50↔100 mA
3.2
150
100
3.2
150
3.15
3.15
100
50
3.1
50
0
3.1
3.05
3.05
3
IOUT
0
IOUT
3
-50
-50
-100
-150
2.95
VOUT
2.9
-100
2.95
2.9
VOUT
-150
-2
0
2
4
6
8
10 12 14 16 18
-2
0
2
4
6
8
10 12 14 16 18
t [μs]
t [μs]
(3) Shutdown pin transient response characteristics
S-1111B15 (Ta = 25 °C)
VIN = 2.5 V, COUT = 2.2 μF, CIN = 1.0 μF
S-1111B30 (Ta = 25 °C)
VIN = 4.0 V, COUT = 2.2 μF, CIN = 1.0 μF
5
6
4
2.5
3
2
4
2
VON/OFF
VON/OFF
3
2
0
1.5
1
1
0
2
VOUT
VOUT
1
0
-2
-4
-6
0.5
0
-1
-2
-3
-1
-0.5
-10
0
10 20 30 40 50 60 70 80 90
-10
0
10 20 30 40 50 60 70 80 90
t [μs]
t [μs]
S-1111B50 (Ta = 25 °C)
VIN = 6.0 V, COUT = 2.2 μF, CIN = 1.0 μF
7
6
8
6
4
2
0
VON/OFF
5
4
3
VOUT
2
-2
1
-4
-6
-8
0
-1
-10
0
10 20 30 40 50 60 70 80 90
t [μs]
21
Seiko Instruments Inc.
2.9±0.2
1.9±0.2
4
5
+0.1
-0.06
1
2
3
0.16
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.2
TITLE
SOT235-A-PKG Dimensions
MP005-A-P-SD-1.2
No.
SCALE
UNIT
mm
Seiko Instruments Inc.
4.0±0.1(10 pitches:40.0±0.2)
+0.1
-0
2.0±0.05
0.25±0.1
ø1.5
+0.2
-0
4.0±0.1
ø1.0
1.4±0.2
3.2±0.2
3
4
2 1
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
MP005-A-C-SD-2.1
No.
SCALE
UNIT
mm
Seiko Instruments Inc.
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
TITLE
SOT235-A-Reel
MP005-A-R-SD-1.1
No.
SCALE
UNIT
QTY.
3,000
mm
Seiko Instruments Inc.
·
·
The information described herein is subject to change without notice.
Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein
whose related industrial properties, patents, or other rights belong to third parties. The application circuit
examples explain typical applications of the products, and do not guarantee the success of any specific
mass-production design.
·
·
·
When the products described herein are regulated products subject to the Wassenaar Arrangement or other
agreements, they may not be exported without authorization from the appropriate governmental authority.
Use of the information described herein for other purposes and/or reproduction or copying without the
express permission of Seiko Instruments Inc. is strictly prohibited.
The products described herein cannot be used as part of any device or equipment affecting the human
body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus
installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc.
Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the
failure or malfunction of semiconductor products may occur. The user of these products should therefore
give thorough consideration to safety design, including redundancy, fire-prevention measures, and
malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.
·
S-1111B43MC-NZCTFG 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
S-1111B44MC-NZDTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B45MC-NZETFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B46MC-NZFTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B47MC-NZGTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B48MC-NZHTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B49MC-NZITFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B50MC-NZJTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B51MC-NZKTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B52MC-NZLTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 | |
S-1111B53MC-NZMTFG | SII | HIGH RIPPLE-REJECTION LOW DROPOUT | 获取价格 |
S-1111B43MC-NZCTFG 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6