S-8353A20MC-IQFT2G [SII]
BUILT-IN TRANSISTOR SWITCHING REGULATOR;型号: | S-8353A20MC-IQFT2G |
厂家: | SEIKO INSTRUMENTS INC |
描述: | BUILT-IN TRANSISTOR SWITCHING REGULATOR 开关 光电二极管 |
文件: | 总49页 (文件大小:2356K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
S-8353/8354 Series
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE
BUILT-IN TRANSISTOR SWITCHING REGULATOR
www.sii-ic.com
© SII Semiconductor Corporation, 2002-2010
Rev.3.0_01
The S-8353/8354 Series is a CMOS step-up switching regulator which mainly consists of a reference voltage source, an
oscillation circuit, a power MOS FET, an error amplifier, a phase compensation circuit, a PWM control circuit (S-8353 Series)
and a PWM / PFM switching control circuit (S-8354 Series).
The S-8353/8354 Series can configure the step-up switching regulator with an external coil, capacitor, and diode. In
addition to the above features, the small package and low current consumption make the S-8353/8354 Series ideal for
portable equipment applications requiring high efficiency.
The S-8353 Series realizes low ripple, high efficiency, and excellent transient characteristics due to its PWM control circuit
whose duty ratio can be varied linearly from 0% to 83% (from 0% to 78% for 250 kHz models), an excellently designed error
amplifier, and phase compensation circuits.
The S-8354 Series features a PWM / PFM switching controller that can switch the operation to a PFM controller with a duty
ratio is 15% under a light load to prevent a decline in the efficiency due to the IC operating current.
Features
• Low voltage operation: Startup at 0.9 V min. (IOUT = 1 mA) guaranteed
• Low current consumption : During operation 18.7 μA (3.3 V, 50 kHz, typ.)
During shutdown: 0.5 μA (max.)
• Duty ratio : Built-in PWM / PFM switching control circuit (S-8354 Series)
15 % to 83 % (30 kHz and 50 kHz models)
15 % to 78 % (250 kHz models)
• External parts : Coil, capacitor, and diode
• Output voltage : Selectable in 0.1 V steps between 1.5 V and 6.5 V (for VDD / VOUT separate types)
Selectable in 0.1 V steps between 2.0 V and 6.5 V (for other than VDD / VOUT separate types)
• Output voltage accuracy : 2.4%
• Oscillation frequency : 30 kHz, 50 kHz, and 250 kHz selectable
• Soft start function : 6 ms (50 kHz, typ.)
• Lead-free, Sn 100%, halogen-free*1
*1. Refer to “ Product Name Structure” for details.
Applications
• Power supplies for portable equipment such as digital cameras, electronic notebooks, and PDAs
• Power supplies for audio equipment such as portable CD / MD players
• Constant voltage power supplies for cameras, VCRs, and communication devices
• Power supplies for microcomputers
Packages
• SOT-23-3
• SOT-23-5
• SOT-89-3
1
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Block Diagrams
(1) A, C and H Types (Without Shutdown Function)
CONT
VOUT
Oscillation circuit
IC internal
power supply
PWMcontrol circuit
or PWM / PFM
swiching control
circuit
+
−
Soft start built-in
reference power
supply
Phase
compensation
circuit
VSS
Figure 1
(2) A and H Types (With Shutdown Function)
CONT
VOUT
Oscillation circuit
IC internal
power supply
PWMcontrol circuit
or PWM / PFM
swiching control
circuit
+
−
Soft start built-in
reference power
supply
Phase
compensation
circuit
VSS
ON/OFF
Figure 2
(3) D and J Types (VDD / VOUT Separate Type)
CONT
VDD
VOUT
Oscillation circuit
IC internal
power supply
+
−
PWMcontrol circuit
or PWM / PFM
swiching control
circuit
Soft start built-in
reference power
supply
Phase
compensation
circuit
VSS
Figure 3
2
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Product Name Structure
The control system, product types, output voltage, and packages for the S-8353/8354 Series can be selected at the
user’s request. Please refer to the “3. Product Name” for the definition of the product name, “4. Package” regarding
the package drawings and “5. Product Name List” for the full product names.
1. Function List
(1) PWM Control Products
Table 1
Switching
Frequency
[kHz]
VDD / VOUT
Separate
Type
Shutdown
Function
Product Name
Package
Application
S-8353AxxMC
S-8353AxxMA
S-8353AxxUA
S-8353CxxMA
S-8353CxxUA
50
50
50
30
30
Yes
−
−
−
−
−
−
−
−
−
SOT-23-5
SOT-23-3
SOT-89-3
SOT-23-3
SOT-89-3
Applications requiring shutdown function
Applications not requiring shutdown function
Applications not requiring shutdown function
For pager
For pager
Applications requiring variable output voltage
with an external resistor
S-8353DxxMC
S-8353HxxMC
S-8353HxxMA
S-8353HxxUA
S-8353JxxMC
50
−
Yes
−
Yes
SOT-23-5
SOT-23-5
SOT-23-3
SOT-89-3
SOT-23-5
Applications requiring a shutdown function
and a thin coil
250
250
250
250
−
Applications not requiring a shutdown function
and requiring a thin coil
−
Applications not requiring a shutdown function
and requiring a thin coil
−
−
Applications requiring variable output voltage
with an external resistor and a thin coil
−
Yes
(2) PWM / PFM Switching Control Products
Table 2
Switching
Frequency
[kHz]
VDD / VOUT
Separate
Type
Shutdown
Function
Product Name
Package
Application
S-8354AxxMC
S-8354AxxMA
S-8354AxxUA
S-8354CxxMA
50
50
50
30
Yes
−
−
−
−
−
−
SOT-23-5
SOT-23-3
SOT-89-3
SOT-23-3
Applications requiring shutdown function
Applications not requiring shutdown function
Applications not requiring shutdown function
For pager
−
Applications requiring variable output voltage
with an external resistor
S-8354DxxMC
S-8354HxxMC
S-8354HxxMA
S-8354HxxUA
S-8354JxxMC
50
−
Yes
−
Yes
SOT-23-5
SOT-23-5
SOT-23-3
SOT-89-3
SOT-23-5
Applications requiring a shutdown function
and a thin coil
250
250
250
250
−
Applications not requiring a shutdown function
and requiring a thin coil
−
Applications not requiring a shutdown function
and requiring a thin coil
−
−
Applications requiring variable output voltage
with an external resistor and a thin coil
−
Yes
3
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
2. Package and Function List by Product Type
Table 3
Package Name Shutdown Function VDD / VOUT Separate Type
Series Name
Type
(Abbreviation)
MC
Yes / No
Yes
Yes / No
No
A (Normal product or with shutdown function)
A = 50 kHz
MA / UA
No
C (Normal product)
C = 30 kHz
MA
MC
No
No
No
D (VDD / VOUT separate type)
D = 50 kHz
S-8353 Series,
S-8354 Series
Yes
H (Normal product or with shutdown
function)
H = 250 kHz
MC
Yes
No
No
MA / UA
J (VDD / VOUT separate type)
J = 250 kHz
MC
No
Yes
3. Product Name
(1) SOT-23-3
S-835 x
x
xx MA - xxx xx
x
Environmental code
U : Lead-free (Sn 100%), halogen-free
G : Lead-free (for details, please contact our sales office)
IC direction in tape specifications *1
T1 : Product of environmental code = U
T2 : Product of environmental code = G
Product code *2
Package code
MA : SOT-23-3
Output voltage
15 to 65
(e.g. When the output voltage is 1.5 V, it is expressed as 15.)
Product type
A : Normal products (SOT-23-3, SOT-89-3)
or With shutdown function products (SOT-23-5), fOSC = 50 kHz
C : Normal products,
D : VDD / VOUT separate type,
H : Normal products (SOT-23-3, SOT-89-3)
fOSC = 30 kHz
fOSC = 50 kHz
or With shutdown function products (SOT-23-5), fOSC = 250 kHz
J : VDD / VOUT separate type,
fOSC = 250 kHz
Control system
3 : PWM control
4 : PWM / PFM switching control
*1. Refer to the tape specifications.
*2. Refer to the Table 4 to Table 8 in the “5. Product Name List”.
4
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(2) SOT-23-5, SOT-89-3
S-835 x xx xx - xxx T2
x
x
Environmental code
U : Lead-free (Sn 100%), halogen-free
G : Lead-free (for details, please contact our sales office)
IC direction in tape specifications *1
Product code *2
Package code
MC : SOT-23-5
UA : SOT-89-3
Output voltage
15 to 65
(e.g. When the output voltage is 1.5 V, it is expressed as 15.)
Product type
A : Normal products (SOT-23-3, SOT-89-3)
or With shutdown function products (SOT-23-5), fOSC = 50 kHz
C : Normal products,
D : VDD / VOUT separate type,
H : Normal products (SOT-23-3, SOT-89-3)
fOSC = 30 kHz
fOSC = 50 kHz
or With shutdown function products (SOT-23-5), fOSC = 250 kHz
J : VDD / VOUT separate type,
fOSC = 250 kHz
Control system
3 : PWM control
4 : PWM / PFM switching control
*1. Refer to the tape specifications.
*2. Refer to the Table 4 to Table 8 in the “5. Product Name List”.
4. Package
Drawing Code
Tape
Package Name
Package
Reel
Environmental code = G
Environmental code = U
MP003-A-P-SD
MP003-C-P-SD
MP005-A-P-SD
UP003-A-P-SD
MP003-A-C-SD
MP003-C-C-SD
MP005-A-C-SD
UP003-A-C-SD
MP003-A-R-SD
MP003-Z-R-SD
MP005-A-R-SD
UP003-A-R-SD
SOT-23-3
SOT-23-5
SOT-89-3
5
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
5. Product Name List
(1) S-8353 Series
Table 4
S-8353AxxMA
Output
voltage
S-8353AxxMC
S-8353AxxUA
Series
S-8353CxxMA
Series
Series
Series
2.0 V
2.5 V
2.7 V
2.8 V
3.0 V
3.3 V
3.5 V
3.6 V
3.8 V
4.0 V
4.5 V
4.6 V
5.0 V
5.5 V
S-8353A20MC-IQFT2x
S-8353A25MC-IQKT2x
S-8353A27MC-IQMT2x
S-8353A28MC-IQNT2x
S-8353A30MC-IQPT2x
S-8353A33MC-IQST2x
S-8353A35MC-IQUT2x
−
−
−
−
−
−
−
−
−
−
−
−
−
S-8353A30MA-IQPT S-8353A30UA-IQPT2x
S-8353C30MA-ISPT
S-8353A33MA-IQST S-8353A33UA-IQST2x
−
−
−
−
−
−
−
−
−
−
−
−
−
S-8353A36UA-IQVT2x
S-8353A38UA-IQXT2x
S-8353A40UA-IQZT2x
−
S-8353A38MC-IQXT2x
−
S-8353A45MC-IRET2x
−
S-8353A50MC-IRJT2x
−
S-8353C46MA-ITFT
S-8353A50MA-IRJT
S-8353A50UA-IRJT2x
−
−
S-8353A55MC-IROT2x
−
S-8353A55UA-IROT2x
Table 5
Output
voltage
S-8353CxxUA
Series
S-8353DxxMC
Series
S-8353HxxMC
Series
S-8353HxxMA
Series
2.0 V
2.6 V
2.8 V
3.0 V
3.1 V
3.2 V
3.3 V
3.5 V
3.7 V
3.8 V
4.0 V
4.5 V
5.0 V
6.0 V
6.5 V
−
−
−
S-8353D20MC-IUFT2x
S-8353H20MC-IWFT2x
S-8353H26MC-IWLT2x
S-8353H28MC-IWNT2x
S-8353H30MC-IWPT2x
S-8353H31MC-IWQT2x
S-8353H32MC-IWRT2x
S-8353H33MC-IWST2x
S-8353H35MC-IWUT2x
S-8353H37MC-IWWT2x
S-8353H38MC-IWXT2x
S-8353H40MC-IWZT2x
S-8353H45MC-IXET2x
S-8353H50MC-IXJT2x
S-8353H60MC-IXTT2x
S-8353H65MC-IXYT2x
−
−
−
−
−
S-8353C30UA-ISPT2x
S-8353D30MC-IUPT2x
S-8353H30MA-IWPT
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
S-8353H33MA-IWST
−
−
−
−
−
−
−
−
S-8353D50MC-IVJT2x
−
−
Remark 1. Please contact the SII Semiconductor Corporation marketing department for products with an output voltage other
than those specified above.
2. x: G or U
3. : 2G or 1U
4. Please select products of environmental code = U for Sn 100%, halogen-free products.
6
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Table 6
S-8353HxxUA
Output
voltage
S-8353JxxMC
Series
Series
1.8 V
2.0 V
2.1 V
2.5 V
3.0 V
−
−
−
−
−
S-8353J18MC-IYDT2x
S-8353J20MC-IYFT2x
S-8353J21MC-IYGT2x
S-8353J25MC-IYKT2x
S-8353J30MC-IYPT2x
S-8353J33MC-IYST2x
−
3.3 V
3.6 V
5.0 V
S-8353H33UA-IWST2x
S-8353H36UA-IWVT2x
S-8353H50UA-IXJT2x
S-8353J50MC-IZJT2x
(2) S-8354 Series
Table 7
Output
voltage
S-8354AxxMC
Series
S-8354AxxMA
Series
S-8354AxxUA
Series
S-8354CxxMA
Series
2.0 V
2.7 V
2.8 V
3.0 V
3.3 V
3.5 V
3.8 V
4.0 V
5.0 V
−
S-8354A20MA-JQFT
−
−
−
−
−
S-8354A27MC-JQMT2x
S-8354A27MA-JQMT
−
S-8354A28MA-JQNT
S-8354A28UA-JQNT2x
S-8354A30MC-JQPT2x
S-8354A33MC-JQST2x
−
S-8354A38MC-JQXT2x
S-8354A40MC-JQZT2x
S-8354A50MC-JRJT2x
S-8354A30MA-JQPT
S-8354A30UA-JQPT2x S-8354C30MA-JSPT
S-8354A33MA-JQST
S-8354A33UA-JQST2x
S-8354A35UA-JQUT2x
−
−
−
−
−
−
−
−
−
S-8354A40UA-JQZT2x
S-8354A50MA-JRJT S-8354A50UA-JRJT2x
Table 8
Output
voltage
S-8354DxxMC
Series
S-8354HxxMC
Series
S-8354HxxUA
Series
S-8354JxxMC
Series
1.5 V
2.0 V
2.5 V
2.7V
−
−
−
−
−
−
S-8354J15MC-JYAT2x
S-8354D20MC-JUFT2x
S-8354J20MC-JYFT2x
−
−
S-8354H25MC-JWKT2x
−
−
S-8354H27MC-JWMT2x S-8354H27UA-JWMT2x
3.0 V
3.1 V
3.3 V
3.5 V
4.0 V
4.2 V
4.5 V
4.7 V
5.0 V
S-8354D30MC-JUPT2x
S-8354H30MC-JWPT2x
S-8354H31MC-JWQT2x
S-8354H33MC-JWST2x
S-8354H35MC-JWUT2x
S-8354H40MC-JWZT2x
S-8354H42MC-JXBT2x
S-8354H45MC-JXET2x
S-8354H47MC-JXGT2x
S-8354H50MC-JXJT2x
−
−
−
−
−
−
−
−
−
S-8354J30MC-JYPT2x
−
−
S-8354D33MC-JUST2x
S-8354J33MC-JYST2x
−
−
−
−
−
−
−
−
−
−
−
S-8354J50MC-JZJT2x
Remark 1. Please contact the SII Semiconductor Corporation marketing department for products with an output voltage other
than those specified above.
2. x: G or U
3. : 2G or 1U
4. Please select products of environmental code = U for Sn 100%, halogen-free products.
7
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Pin Configurations
SOT-23-3
Top view
Table 9 A, C and H Types
(Without shutdown function, VDD / VOUT non-separate type)
1
Pin No.
Symbol
VOUT
VSS
Description
Output voltage pin and IC power supply pin
GND pin
1
2
3
CONT
External inductor connection pin
2
3
Figure 4
Table 10 A and H Types
(With shutdown function, VDD / VOUT non-separate type)
SOT-23-5
Top view
5
4
Pin No.
1
Symbol
Description
Shutdown pin
“H”: Normal operation (Step-up operating)
“L”: Step-up stopped (Entire circuit stopped)
Output voltage pin and IC power supply pin
No connection
ON/ OFF
2
3
4
5
VOUT
NC*1
VSS
GND pin
1
2
3
CONT
External inductor connection pin
Figure 5
*1. The NC pin indicates electrically open.
Table 11 D and J Types
(Without shutdown function, VDD / VOUT separate type)
Pin No.
Symbol
VOUT
VDD
Description
Output voltage pin
1
2
3
4
5
IC power supply pin
No connection
NC*1
VSS
GND pin
CONT
External inductor connection pin
*1. The NC pin indicates electrically open.
SOT-89-3
Top view
Table 12 A and H Types
(Without shutdown function, VDD / VOUT non-separate type)
Pin No.
Symbol
VSS
Description
1
2
3
GND pin
VOUT
CONT
Output voltage pin and IC power supply pin
External inductor connection pin
1
2
3
Figure 6
8
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Absolute Maximum Ratings
Table 13
(Ta = 25°C unless otherwise specified)
Item
Symbol
VOUT
Absolute maximum rating
Unit
V
VOUT pin voltage
VSS − 0.3 to VSS + 12
VSS − 0.3 to VSS + 12
ON/ OFF pin voltage*1
VON/OFF
V
VDD pin voltage*2
CONT pin voltage
CONT pin current
VDD
VSS − 0.3 to VSS + 12
VSS − 0.3 to VSS + 12
V
VCONT
ICONT
V
300
mA
mW
mW
mW
mW
mW
mW
°C
150 (When not mounted on board)
SOT-23-3
430*3
250 (When not mounted on board)
600*3
Power dissipation
SOT-23-5
SOT-89-3
PD
500 (When not mounted on board)
1000*3
Operating ambient temperature
Storage temperature
Topr
Tstg
−40 to + 85
−40 to + 125
°C
*1. With shutdown function
*2. For VDD / VOUT separate type
*3. When mounted on board
[Mounted board]
(1) Board size :
(2) Board name :
114.3 mm × 76.2 mm × t1.6 mm
JEDEC STANDARD51-7
Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical
damage. These values must therefore not be exceeded under any conditions.
(1) When mounted on board
(2) When not mounted on board
1200
600
1000
800
500
SOT-89-3
SOT-89-3
400
300
200
100
0
SOT-23-5
SOT-23-3
SOT-23-5
SOT-23-3
600
400
200
0
0
50
100
150
0
50
100
150
Ambient temperature (Ta) [°C]
Ambient temperature (Ta) [°C]
Figure 7 Power Dissipation of Packages
9
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Electrical Characteristics
(1) 50 kHz Product (A and D Types)
Table 14
(Ta = 25°C unless otherwise specified)
Measurement
Item
Output voltage
Symbol
VOUT
Condition
Min.
Typ.
Max.
Unit
circuit
VOUT(S) VOUT(S) VOUT(S)
0.976
−
−
V
2
×
×
1.024
10
Input voltage
VIN
−
−
−
−
−
−
V
V
V
2
2
1
Operation start voltage
Oscillation start voltage
VST1
VST2
IOUT = 1 mA
No external parts, Voltage applied to VOUT
OUT = 1 mA, Judged by decreasing VIN
voltage gradually
0.9
0.8
I
Operation holding voltage
Current consumption 1
VHLD
0.7
−
−
V
2
S-835xx15 to 19
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
S-835xx15 to 19
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
−
−
−
−
−
−
−
−
−
−
−
−
10.8
13.3
18.7
24.7
31.0
37.8
4.8
18.0
22.2
31.1
41.1
51.6
63.0
9.5
μA
μA
μA
μA
μA
μA
μA
μA
μA
1
1
1
1
1
1
1
1
1
1
1
1
ISS1
VOUT = VOUT(S)
×
+
0.95
5.0
9.9
5.1
10.2
10.6
10.9
11.3
Current consumption 2
ISS2
VOUT = VOUT(S)
0.5 V
5.3
μA
μA
μA
5.5
5.7
Current consumption during
shutdown
VON/OFF = 0 V
ISSS
−
−
0.5
μA
1
(With shutdown function)
S-835xx15 to 19
S-835xx20 to 24
S-835xx25 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
80
128
165
200
231
282
320
344
−
−
−
−
−
−
−
mA
mA
mA
mA
mA
mA
mA
1
1
1
1
1
1
1
103
125
144
176
200
215
Switching current
ISW
VCONT = 0.4 V
Switching transistor leakage
current
ISWQ
VCONT = VOUT = 10 V
−
−
0.5
μA
1
Line regulation
Δ
Δ
VOUT1
VOUT2
∆VOUT
VIN = VOUT(S)
×
0.4 to
×
0.6
−
−
30
30
60
60
mV
mV
2
2
Load regulation
IOUT = 10 A to VOUT(S) / 250 × 1.25
μ
Output voltage temperature
coefficient
Ta =
−40°C to
+85°C
−
50
−
ppm /
°
C
2
∆Ta • VOUT
fOSC
Oscillation frequency
Maximum duty ratio
PWM / PFM switching duty
ratio (For S-8354 Series)
VOUT = VOUT(S)
VOUT = VOUT(S)
×
×
0.95
0.95
42.5
75
50
83
57.5
90
kHz
%
1
1
MaxDuty
PFMDuty
VIN = VOUT(S)
−
0.1 V, No-load
10
15
24
%
1
VSH
VSL1
VSL2
Measured oscillation at CONT pin
0.75
−
−
−
−
−
−
0.3
V
V
V
1
1
1
ON/ OFF pin input voltage
(With shutdown function)
At VOUT
≥
1.5 V
Judged oscillation stop at
CONT pin
At VOUT
<1.5 V
0.2
VON/OFF = VOUT(S)
ON/OFF = 0 V
×
0.95
ISH
ISL
−
0.1
−
−
0.1
0.1
μ
A
1
1
ON/ OFF pin input current
(With shutdown function)
V
−
0.1
μA
Soft start time
Efficiency
tSS
−
−
3.0
6.0
85
12.0
ms
%
2
2
EFFI
−
−
10
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
External parts
Coil:
CDRH6D28-101 of Sumida Corporation
Diode:
MA2Z748 (Shottky type) of Matsushita Electric Industrial Co., Ltd.
Capacitor: F93 (16 V, 22 μF tantalum type) of Nichicon Corporation
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 250 Ω
With shutdown function :
ON/OFF pin is connected to VOUT
For VDD / VOUT separate type : VDD pin is connected to VOUT pin
Remark 1. VOUT(S) specified above is the set output voltage value, and VOUT is the typical value of the actual output
voltage.
2. VDD / VOUT separate type
A step-up operation is performed from VDD = 0.8 V. However, 1.8 V≤VDD≤10 V is recommended stabilizing
the output voltage and oscillation frequency. (VDD≥1.8 V must be applied for products with a set value of less
than 1.9 V.)
11
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(2) 30 kHz Product (C Type)
Table 15
(Ta = 25°C unless otherwise specified)
Measurement
Item
Output voltage
Symbol
Condition
Min.
Typ.
Max.
Unit
circuit
VOUT(S) VOUT(S) VOUT(S)
0.976
VOUT
−
−
V
2
×
×
1.024
10
Input voltage
VIN
−
−
−
−
−
−
V
V
V
2
2
1
Operation start voltage
Oscillation start voltage
VST1
VST2
IOUT = 1 mA
No external parts, Voltage applied to VOUT
OUT = 1 mA, Judged by decreasing VIN
voltage gradually
0.9
0.8
I
Operation holding voltage
Current consumption 1
VHLD
0.7
−
−
V
2
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
S-835xx20 to 24
S-835xx25 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
−
−
−
−
−
−
−
−
−
9.8
13.1
16.8
20.7
24.8
435
4.7
16.4
21.9
28.0
34.5
41.4
9.0
9.4
9.7
10.1
10.4
−
μA
μA
μA
μA
μA
μA
μA
μA
μA
μA
mA
mA
mA
mA
mA
mA
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
ISS1
VOUT = VOUT(S)
×
+
0.95
Current consumption 2
Switching current
ISS2
VOUT = VOUT(S)
0.5 V
4.9
5.1
−
5.2
52
62
72
88
100
108
83
100
115
141
160
172
−
−
−
−
ISW
VCONT = 0.4 V
−
Switching transistor leakage
current
ISWQ
VCONT = VOUT = 10 V
−
−
0.5
μA
1
Line regulation
Δ
Δ
VOUT1
VOUT2
∆VOUT
VIN = VOUT(S)
×
0.4 to
×
0.6
−
−
30
30
60
60
mV
mV
2
2
Load regulation
IOUT = 10 A to VOUT(S) / 250 × 1.25
μ
Output voltage temperature
coefficient
Ta =
−40°C to
+85°C
−
50
−
ppm /
°
C
2
∆Ta • VOUT
fOSC
Oscillation frequency
Maximum duty ratio
PWM / PFM switching duty
ratio (For S-8354 Series)
Soft start time
VOUT = VOUT(S)
VOUT = VOUT(S)
×
×
0.95
0.95
25
75
30
83
35
90
kHz
%
1
1
MaxDuty
PFMDuty
VIN = VOUT(S)
−
0.1 V, No-load
10
15
24
%
1
tSS
−
−
3.0
6.0
84
12.0
ms
%
2
2
Efficiency
EFFI
−
−
External parts
Coil:
Diode:
CDRH6D28-101 of Sumida Corporation
MA2Z748 (Shottky type) of Matsushita Electric Industrial Co., Ltd.
Capacitor: F93 (16 V, 22 μF tantalum type) of Nichicon Corporation
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 250 Ω
Remark VOUT(S) specified above is the set output voltage value, and VOUT is the typical value of the actual output voltage.
12
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(3) 250 kHz Product (H and J Types)
Table 16
(Ta = 25°C unless otherwise specified)
Measurement
Item
Output voltage
Symbol
VOUT
Condition
Min.
Typ.
Max.
Unit
circuit
VOUT(S) VOUT(S) VOUT(S)
0.976
−
−
V
2
×
×
1.024
10
Input voltage
VIN
−
−
−
−
−
−
V
V
V
2
2
1
Operation start voltage
Oscillation start voltage
VST1
VST2
IOUT = 1 mA
No external parts, Voltage applied to VOUT
OUT = 1 mA, Judged by decreasing VIN
voltage gradually
0.9
0.8
I
Operation holding voltage
Current consumption 1
VHLD
0.7
−
−
V
2
S-835xx15 to 19
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
S-835xx15 to 19
S-835xx20 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
−
−
−
−
−
−
−
−
−
−
−
−
36.5
48.3
74.3
60.8
80.5
μA
μA
μA
μA
μA
μA
μA
μA
μA
1
1
1
1
1
1
1
1
1
1
1
1
123.8
ISS1
VOUT = VOUT(S)
×
+
0.95
103.1 171.9
134.1 223.5
167.0 278.4
9.1
9.3
9.5
9.7
9.8
10.0
18.2
18.6
18.9
19.3
19.6
19.9
Current consumption 2
ISS2
VOUT = VOUT(S)
0.5 V
μA
μA
μA
Current consumption during
shutdown
VON/OFF = 0 V
ISSS
−
−
0.5
μA
1
(With shutdown function)
S-835xx15 to 19
S-835xx20 to 24
S-835xx25 to 29
S-835xx30 to 39
S-835xx40 to 49
S-835xx50 to 59
S-835xx60 to 65
80
128
165
200
231
282
320
344
−
−
−
−
−
−
−
mA
mA
mA
mA
mA
mA
mA
1
1
1
1
1
1
1
103
125
144
176
200
215
Switching current
ISW
VCONT = 0.4 V
Switching transistor leakage
current
ISWQ
VCONT = VOUT = 10 V
−
−
0.5
μA
1
Line regulation
Δ
Δ
VOUT1
VOUT2
ΔVOUT
VIN = VOUT(S)
×
0.4 to
×
0.6
−
−
30
30
60
60
mV
mV
2
2
Load regulation
IOUT = 10 A to VOUT(S) / 250 × 1.25
μ
Output voltage temperature
coefficient
Ta =
−40°C to
+85°C
−
50
−
ppm /
°
C
2
ΔTa • VOUT
Oscillation frequency
Maximum duty ratio
PWM / PFM switching duty
ratio (For S-8354 Series)
fOSC
VOUT = VOUT(S)
VOUT = VOUT(S)
×
×
0.95
0.95
212.5
70
250
78
287.5
85
kHz
%
1
1
MaxDuty
PFMDuty
VIN = VOUT(S)
−
0.1 V, No-load
10
15
24
%
1
VSH
VSL1
VSL2
Measured oscillation at CONT pin
0.75
−
−
−
−
−
−
0.3
V
V
V
1
1
1
ON/OFF pin input voltage
(With shutdown function)
At VOUT
≥
1.5 V
Judged oscillation stop at
CONT pin
At VOUT
<1.5 V
0.2
VON/OFF = VOUT(S)
ON/OFF = 0 V
×
0.95
ISH
ISL
−
−
0.1
−
−
0.1
0.1
μ
A
1
1
ON/OFF pin input current
(With shutdown function)
V
0.1
μA
Soft start time
Efficiency
tSS
−
−
1.8
3.6
85
7.2
ms
%
2
2
EFFI
−
−
13
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
External parts
Coil:
Diode:
CDRH6D28-220 of Sumida Corporation
MA2Z748 (Shottky type) of Matsushita Electric Industrial Co., Ltd.
Capacitor: F93 (16 V, 22 μF tantalum type) of Nichicon Corporation
VIN = VOUT(S) × 0.6 applied, IOUT = VOUT(S) / 250 Ω
With shutdown function :
ON/OFF pin is connected to VOUT
For VDD / VOUT separate type : VDD pin is connected to VOUT pin
Remark 1. VOUT(S) specified above is the set output voltage value, and VOUT is the typical value of the actual output
voltage.
2. VDD / VOUT separate type
A step-up operation is performed from VDD = 0.8 V. However, 1.8 V≤VDD≤10 V is recommended stabilizing
the output voltage and oscillation frequency. (VDD≥1.8 V must be applied for products with a set value of less
than 1.9 V.)
14
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Measurement Circuits
300 Ω
1.
CONT
ON/OFF *1
VOUT
VDD*2
A
+
−
VSS
0.1 μF
Figure 8
2.
CONT
VSS
VOUT
+
−
+
−
VDD*2
V
ON/OFF *1
0.1 μF
Figure 9
*1. With shutdown function
*2. For VDD / VOUT separate type
15
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Operation
1. Switching Control Types
1. 1 PWM Control (S-8353 Series)
The S-8353 Series is a DC-DC converter using a pulse width modulation method (PWM) and features low current
consumption. In conventional PFM DC-DC converters, pulses are skipped when the output load current is low,
causing a fluctuation in the ripple frequency of the output voltage, resulting in an increase in the ripple voltage.
In the S-8353 Series, the switching frequency does not change, although the pulse width changes from 0% to
83% (78% for H and J type) corresponding to each load current. The ripple voltage generated from switching can
thus be removed easily using a filter because the switching frequency is constant.
1. 2 PWM / PFM Switching Control (S-8354 Series)
The S-8354 Series is a DC-DC converter that automatically switches between a pulse width modulation method
(PWM) and a pulse frequency modulation method (PFM), depending on the load current, and features low current
consumption.
The S-8354 Series operates under PWM control with the pulse width duty changing from 15% to 83% (78% for H
and J type) in a high output load current area. On the other hand, the S-8354 Series operates under PFM control
with the pulse width duty fixed at 15% in a low output load current area, and pulses are skipped according to the
load current. The oscillation circuit thus oscillates intermittently so that the resultant lower self current
consumption can prevent a reduction in the efficiency at a low load current. The switching point from PWM
control to PFM control depends on the external devices (coil, diode, etc.), input voltage, and output voltage. This
series are an especially efficient DC-DC converter at an output current around 100 μA.
2. Soft Start Function
For this IC, a built-in soft start circuit controls the rush current and overshoot of the output voltage when the power
is turned on or the ON/OFF pin is set to “H” level.
16
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
3. ON/ OFF Pin (Shutdown Pin) (SOT-23-5 Package Products of A and H Types)
ON/OFF pin stops or starts step-up operation.
Setting the ON/OFF pin to the “L” level stops operation of all the internal circuits and reduces the current
consumption significantly.
DO NOT use the ON/OFF pin in a floating state because it has the structure shown in Figure 10 and is not pulled
up or pulled down internally. DO NOT apply a voltage of between 0.3 V and 0.75 V to the ON/OFF pin because
applying such a voltage increases the current consumption. If the ON/OFF pin is not used, connect it to the VOUT
pin.
The ON/OFF pin does not have hysteresis.
Table 17
CR oscillation circuit
Output voltage
Fixed
ON/OFF pin
“H”
“L”
Operation
Stop
*1
≅VIN
*1. Voltage obtained by subtracting the voltage drop due to the DC resistance of the inductor and the diode forward
voltage from VIN.
VOUT
ON/ OFF
VSS
Figure 10 ON/OFF Pin Structure
17
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
4. Operation
The following are the basic equations [(1) through (7)] of the step-up switching regulator. (Refer to Figure 11.)
L
D
CONT
VIN
VOUT
VSS
+
−
M1
EXT
CL
Figure 11 Step-Up Switching Regulator Circuit for Basic Equation
Voltage at CONT pin at the moment M1 is turned ON (VA) *1
:
*2
VA = VS
(1)
*1. Current flowing through L (IL) is zero.
*2. Non-saturated voltage of M1.
The change in IL over time :
dIL
VL
VIN − VS
=
=
(2)
(3)
dt
L
L
Integration of equation (2) (IL) :
VIN − VS
I =
• t
L
L
IL flows while M1 is ON (tON). The time of tON is determined by the oscillation frequency of OSC.
The peak current (IPK) after tON
:
V
IN − VS
L
IPK
=
• t
(4)
ON
The energy stored in L is represented by 1/2 • L (IPK)2.
When M1 is turned OFF (tOFF), the energy stored in L is emitted through a diode to the output capacitor.
Then, the reverse voltage (VL) is generated :
VL = (VOUT + VD*1) − VIN
(5)
(6)
*1. Diode forward voltage
The voltage at CONT pin rises only by VOUT+VD.
The change in the current (IL) flowing through the diode into VOUT during tOFF
:
dIL VL VOUT + VD − V
IN
=
=
dt
L
L
18
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Integration of the equation (6) is as follows :
V
+ VD − V
L
IN
OUT
IL = IPK
−
• t
(7)
During tON, the energy is stored in L and is not transmitted to VOUT. When receiving the output current (IOUT) from
VOUT, the energy of the capacitor (CL) is consumed. As a result, the pin voltage of CL is reduced, and goes to the
lowest level after M1 is turned ON (tON). When M1 is turned OFF, the energy stored in L is transmitted through the
diode to CL, and the voltage of CL rises rapidly. VOUT is a time function, and therefore indicates the maximum value
(ripple voltage (VP P) ) when the current flowing through into VOUT and load current (IOUT) match.
−
Next, the ripple voltage is determined as follows.
IOUT vs. t1 (time) from when M1 is turned OFF (after tON) to when VOUT reaches the maximum level :
V
+ VD − V
L
IN
OUT
IOUT = IPK
−
• t
(8)
(9)
1
L
∴t1 = (IPK −IOUT )•
VOUT + VD − V
IN
When M1 is turned OFF (tOFF), IL = 0 (when the energy of the inductor is completely transmitted). Based on equation (7) :
L
tOFF
=
(10)
(11)
VOUT + VD − V
IPK
IN
When substituting equation (10) for equation (9) :
I
OUT
• tOFF
t1 = tOFF
−
IPK
Electric charge ΔQ1 which is charged in CL during t1 :
t1
t1ILdt = IPK
dt −
t1tdt = IPK • t1 −
•
t1
(12)
(13)
VOUT + VD − V
VOUT + VD − V
IN
1
2
2
IN
ΔQ = 0
• 0
• 0
1
L
L
When substituting equation (12) for equation (9) :
1
IPK +IOUT
ΔQ1= IPK
−
(
IPK −IOUT
)
• t1 =
• t1
2
2
A rise in voltage (VP P) due to ΔQ 1 :
−
∆Q1
1
I
+IOUT
2
PK
VP−P
=
=
•
• t
(14)
1
CL
CL
When taking into consideration IOUT to be consumed during t1 and the Equivalent Series Resistance (RESR) of CL :
ΔQ1
CL
1
I
+IOUT
2
I
+IOUT
2
IOUT • t1
CL
PK
PK
VP−P
=
=
•
• t1+
•R
−
(15)
(16)
ESR
CL
When substituting equation (11) for equation (15) :
2
(IPK −IOUT
)
tOFF
CL
I
+IOUT
PK
VP−P
=
•
+
•R
ESR
2IPK
2
Therefore to reduce the ripple voltage, it is important that the capacitor connected to the output pin has a large
capacity and a small RESR
.
19
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
External Parts Selection
The relationship between the major characteristics of the step-up circuit and the characteristic parameters of the external
parts is shown in Figure 12.
For higher efficiency ?
For larger output current ?
For smaller ripple voltage ?
At PFM control
At PWM control
Larger inductance
Smaller inductance
Smaller direct current resistance of inductor
Larger output capacitance
Larger output capacitance
Figure 12 Relationship between Major Characteristics of Step-up Circuit and External Parts
1. Inductor
The inductance value (L value) has a strong influence on the maximum output current (IOUT) and efficiency (η).
The peak current (IPK) increases by decreasing L value and the stability of the circuit improves and IOUT increases. If L
value is decreased, the efficiency falls causing a decline in the current drive capacity for the switching transistor, and
IOUT decreases.
The loss of IPK by the switching transistor decreases by increasing L and the efficiency becomes maximum at a
certain L value. Further increasing L value decreases the efficiency due to the loss of the direct current resistance of
the coil. IOUT also decreases.
A higher oscillation frequency allows selection of a lower L value, making the coil smaller.
The recommended inductances are a 47 μH to 220 μH for A, C, and D types, a 10 μH to 47 μH for H and J types.
Be careful of the allowable inductor current when choosing an inductor. Exceeding the allowable current of the
inductor causes magnetic saturation, much lower efficiency and destruction of the IC chip due to a large current.
Choose an inductor so that IPK does not exceed the allowable current. IPK in discontinuous mode is calculated by the
following equation:
2IOUT (VOUT + VD − V )
fOSC •L
fosc = oscillation frequency, VD ≅ 0.4 V.
IN
IPK
=
(A)
(17)
2. Diode
Use an external diode that meets the following requirements :
• Low forward voltage : VF < 0.3 V
• High switching speed : 50 ns max.
• Reverse voltage :
• Current rate :
VOUT + VF or more
IPK or more
20
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
3. Capacitor (CIN, CL)
A capacitor on the input side (CIN) improves the efficiency by reducing the power impedance and stabilizing the input
current. Select a CIN value according to the impedance of the power supply used.
A capacitor on the output side (CL) is used for smoothing the output voltage. For step-up types, the output voltage
flows intermittently to the load current, so step-up types need a larger capacitance than step-down types. Therefore,
select an appropriate capacitor in accordance with the ripple voltage, which increases in case of a higher output
voltage or a higher load current. The capacitor value should be 10 μF or more.
Select an appropriate capacitor the equivalent series resistance (RESR) for stable output voltage. The stable voltage
range in this IC depends on the RESR. Although the inductance value (L value) is also a factor, an RESR of 30 to
500 mΩ maximizes the characteristics. However, the best RESR value may depend on the L value, the capacitance,
the wiring, and the applications (output load). Therefore, fully evaluate the RESR under the actual operating
conditions to determine the best value.
Refer to the “1. Example of Ceramic Capacitor Application” (Figure 16) in the “ Application Circuit” for the
circuit example using a ceramic capacitor and the external resistance of the capacitor (RESR).
4. VDD / VOUT Separate Type (D and J Types)
The D and J types provides separate internal circuit power supply (VDD pin) and output voltage setting pin (VOUT
pin) in the IC, making it ideal for the following applications.
(1) When changing the output voltage with external resistance.
(2) When outputting a high voltage within the operating voltage (10 V).
Choose the products in the Table 18 according to the applications (1) or (2) above.
Table 18
Output voltage (VCC
)
1.8 V ≤ VCC < 5 V
5 V ≤ VCC ≤ 10 V
S-835xx18
Yes
−
S-835xx50
−
Yes
Connection to VDD pin
VIN or VCC
VIN
Cautions 1. This IC starts a step-up operation at VDD = 0.8 V, but set 1.8 ≤ VDD ≤ 10 V to stabilize the output
voltage and frequency of the oscillator. (Input a voltage of 1.8 V or more at the VDD pin for all
products with a setting less than 1.9 V.) An input voltage of 1.8 V or more at the VDD pin allows
connection of the VDD pin to either the input voltage VIN pin or output VOUT pin.
2. Choose external resistors RA and RB so as to not affect the output voltage, considering that there
is impedance between the VOUT pin and VSS pin in the IC chip. The internal resistance
between the VOUT pin and VSS pin is as follows :
(1) S-835xx18 : 2.1 MΩ to 14.8 MΩ
(2) S-835xx20 : 1.4 MΩ to 14.8 MΩ
(3) S-835xx30 : 1.4 MΩ to 14.2 MΩ
(4) S-835xx50 : 1.4 MΩ to 12.1 MΩ
3. Attach a capacitor (CC) in parallel to the RA resistance when an unstable event such as
oscillation of the output voltage occurs. Calculate CC using the following equation :
1
CC [ F ] =
2• π •RA • 20 kHz
21
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Standard Circuits
(1) S-8353AxxMA / UA, S-8353CxxMA, S-8353HxxMA/UA, S-8354AxxMA/UA, S-8354CxxMA, S-8354HxxMA / UA
SD
CONT
VOUT
L
Oscillation circuit
IC internal
power
VIN
CIN
supply
PWM control circuit
or PWM / PFM
switching control
circuit
+
−
+
+
−
CL
−
Soft start built-in
reference power
supply
Phase
compensating
circuit
VSS
Remark The power supply for the IC chip is from the VOUT pin.
Figure 13
(2) S-8353AxxMC, S-8353HxxMC, S-8354AxxMC, S-8354HxxMC
SD
VOUT
CONT
L
Oscillation circuit
IC internal
power
supply
VIN CIN
+
+
−
PWM control circuit
or PWM / PFM
switching control
circuit
+
−
CL
−
Phase
compensating
circuit
Soft start built-in
reference power
supply
VSS
ON/ OFF
Remark The power supply for the IC chip is from the VOUT pin.
Figure 14
22
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(3) S-8353DxxMC, S-8353JxxMC, S-8354DxxMC, S-8354JxxMC
SD
VDD
CONT
L
IC internal
power
supply
CC
Oscillation circuit
RA
VIN CIN
PWM control circuit
or PWM / PFM
switching control
circuit
+
−
+
−
+
−
CL
VOUT
RB
Soft start built-in
reference power
supply
Phase
compensating
circuit
VSS
Remark The power supply for the IC chip is from the VOUT pin.
Figure 15
Caution The Above connection diagram will not guarantee successful operation. Perform through
evaluation using the actual application to set the constant.
23
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Precautions
• Mount external capacitors, diodes, and coils as close as possible to the IC. Especially, mounting the output capacitor
(capacitor between VDD pin and VSS pin for VDD / VOUT separate type) in the power supply line of the IC close to the IC
can enable stable output characteristics. If it is impossible, it is recommended to mount and wire a ceramic capacitor
of around 0.1 μF close to the IC.
• Characteristics ripple voltage and spike noise occur in IC containing switching regulators. Moreover rush current flows
at the time of a power supply injection. Because these largely depend on the coil, the capacitor and impedance of
power supply used, fully check them using an actually mounted model.
• Make sure that the dissipation of the switching transistor (especially at a high temperature) does not exceed the
allowable power dissipation of the package.
• The performance of this IC varies depending on the design of the PCB patterns, peripheral circuits and external parts.
Thoroughly test all settings with your device. The recommended external part should be used wherever possible, but if
this is not possible for some reason, contact an SII Semiconductor Corporation sales person.
• Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic
protection circuit.
• SII Semiconductor Corporation claims no responsibility for any and all disputes arising out of or in connection with any
infringement of the products including this IC upon patents owned a third party.
24
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Application Circuits
1. Using Ceramic Capacitor Example
When using small RESR parts such as ceramic capacitors for the output capacitance, mount a resistor (R1)
corresponding to the RESR in series with the ceramic capacitor (CL) as shown in Figure 16.
R1 differs depending on L value, the capacitance, the wiring, and the application (output load).
The following example shows a circuit using R1 = 100 mΩ, output voltage = 3.3 V, output load = 100 mA and its
characteristics.
VOUT
SD
L
R1
CONT
CIN
VIN
VOUT
VSS
CL
Figure 16 Using Ceramic Capacitor Circuit Example
Table 19
CL
IC
S-8353A33
L Type Name
CDRH5D28-101
SD Type Name
MA2Z748
R1
(Ceramic capacitor)
10 μF × 2
100 mΩ
Caution The Above connection diagram and constant will not guarantee successful operation. Perform
through evaluation using the actual application to set the constant.
25
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
2. Output Characteristics of The Using Ceramic Capacitor Circuit Example
The data of the step-up characteristics (a) Output current (IOUT) vs. Efficiency (η) characteristics, (b) Output current
(IOUT) vs. Output voltage (VOUT) characteristics, (c) Output Current (IOUT) vs. Ripple voltage (Vr) under conditions in
Table 19 is shown below.
(a) Output current (IOUT) vs. Efficiency (η)
(b) Output current (IOUT) vs. Output voltage (VOUT
3.40
)
100
80
60
3.35
3.30
40
VIN = 0.9 V
3.25
VIN = 0.9 V
VIN = 1.8 V
VIN = 2.7 V
VIN = 1.8 V
20
VIN = 2.7 V
3.20
0
0.01
0.01
0.1
1
10
100
1000
0.1
1
10
100
1000
IOUT [mA]
IOUT [mA]
(c) Output current (IOUT) vs. Ripple voltage (Vr)
140
VIN = 0.9 V
VIN = 1.8 V
VIN = 2.7 V
120
100
80
60
40
20
0
0.01
0.1
1
10
100
1000
IOUT [mA]
26
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Characteristics (Typical Data)
1. Example of Major Temperature characteristics (Ta = −40°C to +85°C, VOUT = 3.3 V)
(1) Current Consumption 1 (ISS1) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
50
40
30
20
50
40
30
20
10
0
−40 −20
10
0
−40 −20
0
20 40 60 80 100
Ta [°C]
0
20 40 60 80 100
Ta [°C]
(2) Current Consumption 2 (ISS2) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
10
8
10
8
6
6
4
2
0
4
2
0
−40 −20
0
20 40 60 80 100
Ta [°C]
−40 −20
0
20 40 60 80 100
Ta [°C]
(3) Current Consumption at Shutdown (ISSS) vs. Temperature (Ta)
fOSC = 250 kHz
1.0
0.8
0.6
0.4
0.2
0
−40 −20
0
20 40 60 80 100
Ta [°C]
(4) Switching Current (ISW) vs. Temperature (Ta)
(5) Switching Transistor Leakage Current (ISWQ) vs. Temperature (Ta)
fOSC = 250 kHz
fOSC = 250 kHz
1.0
500
400
300
200
100
0
0.8
0.6
0.4
0.2
0
−40 −20
0
20 40 60 80 100
−40 −20
0
20 40 60 80 100
Ta [°C]
Ta [°C]
27
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(6) Oscillation Frequency (fOSC) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
70
350
300
60
50
40
30
250
200
150
−40 −20
0
20 40 60 80 100
−40 −20
0
20 40 60 80 100
Ta [°C]
Ta [°C]
(7) Maximum Duty Ratio (MaxDuty) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
100
90
100
90
80
70
60
50
80
70
60
50
40
20
Ta [°C]
−40 −20
0
20 40 60 80 100
Ta [°C]
−40 −20
0
60 80 100
(8) PWM / PFM Switching Duty Ratio (PFMDuty) vs.
Temperature (Ta) (S-8354 Series)
(9) ON/ OFF Pin Input Voltage “H” (VSH) vs.
Temperature (Ta)
fOSC = 250 kHz
fOSC = 250 kHz
1.0
25
0.8
0.6
20
15
10
5
0.4
0.2
0
−40 −20
0
20 40 60 80 100
Ta [°C]
−40 −20
0
20 40 60 80 100
Ta [°C]
(10) ON/ OFF Pin Input Voltage “L” 1 (VSL1) vs.
(11) ON/ OFF Pin Input Voltage “L” 2 (VSL2) vs.
Temperature (Ta) (S-8354 Series)
Temperatuer (Ta)
fOSC = 250 kHz
fOSC = 250 kHz
1.0
1.0
0.8
0.8
0.6
0.6
0.4
0.4
0.2
0
0.2
0
−40 −20
−40 −20
0
20 40 60 80 100
Ta [°C]
0
20 40 60 80 100
Ta [°C]
28
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
(12) Soft Start Time (tSS) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
8
6
4
2
8
6
4
2
0
0
−40 −20
0
20 40 60 80 100
Ta [°C]
−40 −20
0
20 40 60 80 100
Ta [°C]
(13) Operation Start Voltage (VST1) vs. Temperature (Ta) (14) Oscillation Start Voltage (VST2) vs. Temperature (Ta)
fOSC = 250 kHz
fOSC = 250 kHz
1.2
1.0
0.8
0.6
0.4
0.2
0
1.2
1.0
0.8
0.6
0.4
0.2
0
−40 −20
0
20 40 60 80 100
Ta [°C]
−40 −20
0
20 40 60 80 100
Ta [°C]
(15) Output Voltage (VOUT) vs. Temperature (Ta)
fOSC = 50 kHz
fOSC = 250 kHz
3.40
3.40
3.35
3.30
3.35
3.30
3.25
3.20
3.25
3.20
−40 −20
0
20 40 60 80 100
−40 −20
0
20 40 60 80 100
Ta [°C]
Ta [°C]
29
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
2. Examples of Major Power Supply Dependence Characteristics (Ta = 25°C)
(1) Current Consumption 1 (ISS1) vs. Power Supply Voltage (VDD),
Current Consumption 2 (ISS2) vs. Power Supply Voltage
(VDD
)
VOUT = 3.3 V, fOSC = 50 kHz
VOUT = 3.3 V, fOSC = 250 kHz
50
40
30
20
10
0
100
80
60
40
20
0
0
2
4
6
8
10
0
2
4
6
8
10
VDD [V]
VDD [V]
(2) Oscillation Frequency (fOSC) vs. Power Supply Voltage (VDD
)
fOSC = 50 kHz
fOSC = 250 kHz
70
60
300
250
200
50
40
30
150
100
0
2
4
6
8
10
0
2
4
V
6
8
10
VDD [V]
DD [V]
(3) Switching Current (ISW) vs. Power Supply Voltage (VDD
)
500
400
300
200
100
0
0
2
4
V
6
8
10
DD [V]
(4) Output Voltage (VOUT) vs. Power Supply Voltage (VDD) (VOUT = 3.3 V, VIN = 1.98 V, IOUT = 13.2 mA, VDD Separate Type)
fOSC = 50 kHz fOSC = 250 kHz
3.4
3.3
3.2
3.1
3.0
3.4
3.3
3.2
3.1
3.0
0
2
4
V
6
8
10
0
2
4
6
8
10
DD [V]
VDD [V]
30
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
3. Output Waveforms (VIN = 1.98 V)
(1) S-8353A33
IOUT = 10 mA
IOUT = 50 mA
Output voltage
[0.01 V / div]
Output voltage
[0.01 V / div]
CONT voltage
[1 V / div]
CONT voltage
[1 V / div]
t [10 μs / div]
t [10 μs / div]
IOUT = 100 mA
Output voltage
[0.02 V / div]
CONT voltage
[1 V / div]
t [10 μs / div]
(2) S-8354H33
IOUT = 10 mA
IOUT = 100 μA
Output voltage
[0.01 V / div]
Output voltage
[0.01 V / div]
CONT voltage
[1 V / div]
CONT voltage
[1 V / div]
t [2 μs / div]
t [2 μs / div]
IOUT = 50 mA
IOUT = 100 mA
Output voltage
[0.02 V / div]
Output voltage
[0.02 V / div]
CONT voltage
[1 V / div]
CONT voltage
[1 V / div]
t [2 μs / div]
t [2 μs / div]
31
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
4. Examples of Transient Response Characteristics (Ta = 25°C, 250 kHz, S-8354H33)
(1) Power-On (VIN : 0 V → 2.0 V)
IOUT = 1 mA
IOUT = 50 mA
2
0
2
0
4
2
0
4
2
0
t [1 ms / div]
t [1 ms / div]
(2) ON/OFF Pin Response ( VON/OFF : 0 V → 2.0 V, VIN = 2 V)
IOUT = 1 mA
IOUT = 50 mA
2
0
2
0
4
2
0
4
2
0
t [1 ms / div]
t [1 ms / div]
(3) Load Fluctuations (VIN = 1.98 V)
100 μA → 50 mA
50 mA → 100 μA
50 mA
50 mA
100 μA
100 μA
VOUT
[0.05 V / div]
VOUT
[0.05 V / div]
t [200 μs / div]
(4) Input Voltage Fluctuations (IOUT = 50 mA)
VIN = 1.98 V → 2.64 V
t [5 ms / div]
VIN = 2.64 V → 1.98 V
2.64
1.98
2.64
1.98
VOUT
[0.04 V / div]
VOUT
[0.02 V / div]
t [100 μs / div]
t [100 μs / div]
32
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Reference Data
Reference data is provided to determine specific external components. Therefore, the following data shows the
characteristics of the recommended external components selected for various applications.
1. External Parts for Reference Data
Table 20 Efficiency vs. Output Current Characteristics and Output Voltage vs. Output Current Characteristics for
External Parts
Oscillation
Condition Product Name
Output voltage Control system
Inductor
Diode
Output capacitor
frequency
250 kHz
250 kHz
250 kHz
50 kHz
1
2
3
4
5
6
7
8
S-8353H50MC
S-8353H50MC
S-8353H50MC
S-8354A50MC
S-8354A50MC
S-8353A50MC
S-8353A50MC
S-8353A33MC
5.0 V
5.0 V
5.0 V
5.0 V
5.0 V
5.0 V
5.0 V
3.3 V
PWM
PWM
PWM
CDRH8D28-220
CDRH5D28-220
CXLP120-220
F93 (16 V, 47 μF)
F93 (6.3 V, 22 μF)
F92 (6.3 V, 47 μF)
F93 (6.3 V, 22 μF)
F92 (6.3 V, 47 μF)
F93 (6.3 V, 22 μF)
F92 (6.3 V, 47 μF)
F93 (6.3 V, 22 μF)
PWM / PFM CDRH8D28-101
MA2Z748
50 kHz
PWM / PFM
PWM
CXLP120-470
CDRH8D28-101
CXLP120-470
50 kHz
50 kHz
PWM
50 kHz
PWM
CDRH8D28-101
The properties of the external parts are shown below.
Table 21 Properties of External Parts
Component
Inductor
Product name
Manufacturer
Characteristics
22 μH, DCR*1 = 95 mΩ, IMAX.*2 = 1.6 A,
Component height = 3.0 mm
100 μH, DCR*1 = 410 mΩ, IMAX.*2 = 0.75 A,
Component height = 3.0 mm
22 μH, DCR*1 = 122 mΩ, IMAX.*2 = 0.9 A,
Component height = 3.0 mm
22 μH, DCR*1 = 590 mΩ, IMAX.*2 = 0.55 A,
Component height = 1.2 mm
47 μH, DCR*1 = 950 mΩ, IMAX.*2 = 0.45 A,
Component height = 1.2 mm
CDRH8D28-220
CDRH8D28-101
CDRH5D28-220
CXLP120-220
CXLP120-470
MA2Z748
Sumida Corporation
Sumitomo Special Metals Co.,
Ltd.
Matsushita Electric Industrial
Co., Ltd.
Diode
VF*3 = 0.4 V, IF*4 = 0.3 A
F93 (16 V, 47 μF)
F93 (6.3 V, 22 μF)
F92 (6.3 V, 47 μF)
Capacitor
Nichicon Corporation
−
*1. Direct current resistance
*2. Maximum allowable current
*3. Forward voltage
*4. Forward current
Caution The values shown in the characteristics column of Table 21 above are based on the materials provided by
each manufacture. However, consider the characteristics of the original materials when using the above
products.
33
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
2. Output Current (IOUT) vs. Efficiency (η) Characteristics, Output Current (IOUT) vs. Output Voltage
(VOUT) Characteristics
The following shows the actual (a) Output current (IOUT) vs. Efficiency (η) characteristics and (b) Output current (IOUT
vs. Output voltage (VOUT) characteristics under the conditions of No. 1 to 8 in Table 20.
)
Condition 1 S-8353H50MC
(a) Output current (IOUT) vs. Efficiency (η)
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
)
)
)
100
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 2 V
VIN = 3 V
40
VIN = 3 V
VIN = 4 V
4.8
VIN = 4 V
4.7
0.01
20
0.01
0.1
1
10
100 1000
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 2 S-8353H50MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 3 V
VIN = 2 V
40
VIN = 3 V
VIN = 4 V
4.8
VIN = 4 V
20
4.7
0.01
0.1
1
10
100 1000
0.01 0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 3 S-8353H50MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
5.1
5.0
80
60
4.9
VIN=2 V
VIN=3 V
VIN=4 V
VIN = 2 V
VIN = 3 V
VIN = 4 V
40
4.8
4.7
20
0.01
0.1
1
10
100 1000
0.01
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 4 S-8354A50MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
)
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 3 V
VIN = 4 V
VIN = 2 V
VIN = 3 V
VIN = 4 V
40
4.8
4.7
20
0.01
0.1
1
10
100 1000
0.01
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
34
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
Condition 5 S-8354A50MC
(a) Output current (IOUT) vs. Efficiency (η)
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
)
)
)
)
100
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 3 V
VIN = 2 V
40
VIN = 3 V
VIN = 4 V
4.8
VIN = 4 V
20
4.7
0.01
0.1
1
10
100 1000
0.01
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 6 S-8353A50MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 3 V
VIN = 2 V
40
VIN = 3 V
VIN = 4 V
4.8
VIN = 4 V
20
4.7
0.01
0.01
0.1
1
10
100 1000
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 7 S-8353A50MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
5.2
5.1
5.0
80
60
4.9
VIN = 2 V
VIN = 3 V
VIN = 2 V
40
VIN = 3 V
VIN = 4 V
4.8
VIN = 4 V
20
0.01
4.7
0.01
0.1
1
10
100 1000
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
Condition 8 S-8353A33MC
(a) Output current (IOUT) vs. Efficiency (η)
100
(b) Output current (IOUT) vs. Output voltage (VOUT
3.5
3.4
3.3
80
60
3.2
VIN = 0.9 V
VIN = 1.8 V
VIN = 2.7 V
VIN = 0.9 V
VIN = 1.8 V
VIN = 2.7 V
40
3.1
20
0.01
3.0
0.01
0.1
1
10
100 1000
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
35
STEP-UP, PWM CONTROL or PWM / PFM SWITCHABLE BUILT-IN TRANSISTOR SWITCHING REGULATOR
Rev.3.0_01
S-8353/8354 Series
3. Output Current (IOUT) vs. Ripple Voltage (Vr) Characteristics
The following shows the actual Output current (IOUT) vs. Ripple voltage (Vr) characteristics and (b) Output current
(IOUT) vs. Output voltage (VOUT) characteristics under the conditions of No. 1 to 8 in Table 20.
Condition 1 S-8353H50MC
Condition 2 S-8353H50MC
100
100
VIN = 2 V
VIN = 3 V
VIN = 4 V
VIN = 2 V
VIN = 3 V
VIN = 4 V
80
60
40
20
0
80
60
40
20
0
0.01
0.1
1
10
IOUT [mA]
100 1000
100 1000
100 1000
100 1000
0.01 0.1
1
10
100 1000
IOUT [mA]
Condition 3 S-8353H50MC
Condition 4 S-8354A50MC
200
200
VIN = 2 V
VIN = 2 V
160
120
80
VIN = 3 V
VIN = 4 V
160
120
80
VIN = 3 V
VIN = 4 V
40
40
0
0.01
0
0.01
0.1
1
10
100 1000
0.1
1
10
IOUT [mA]
IOUT [mA]
Condition 5 S-8354A50MC
Condition 6 S-8353A50MC
200
280
VIN = 2 V
VIN = 2 V
VIN = 3 V
VIN = 4 V
240
200
160
160
120
80
VIN = 3 V
VIN = 4 V
120
80
40
0
40
0
0.01
0.1
1
10
IOUT [mA]
0.01
0.1
1
10
100 1000
IOUT [mA]
Condition 7 S-8353A50MC
Condition 8 S-8353A33MC
200
280
VIN = 2 V
VIN = 2 V
VIN = 3 V
VIN = 4 V
240
200
160
160
120
80
VIN = 3 V
VIN = 4 V
120
80
40
0
40
0
0.01
0.1
1
10
0.01
0.1
1
10
100 1000
IOUT [mA]
IOUT [mA]
36
2.9±0.2
1
2
3
+0.1
0.95±0.1
0.16
-0.05
1.9±0.2
0.4±0.1
No. MP003-A-P-SD-1.1
TITLE
SOT233-A-PKG Dimensions
MP003-A-P-SD-1.1
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
+0.1
4.0±0.1
2.0±0.1
1.5
-0.05
0.25±0.05
1.6±0.1
1.1±0.1
4.0±0.1
2.85±0.2
3
2
1
Feed direction
No. MP003-A-C-SD-1.1
SOT233-A-Carrier Tape
MP003-A-C-SD-1.1
TITLE
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP003-A-R-SD-1.1
SOT233-A-Reel
MP003-A-R-SD-1.1
TITLE
No.
SCALE
UNIT
3,000
QTY.
mm
SII Semiconductor Corporation
2.9±0.2
1
2
3
+0.1
-0.06
0.16
0.95±0.1
1.9±0.2
0.4±0.1
No. MP003-C-P-SD-1.0
TITLE
SOT233-C-PKG Dimensions
MP003-C-P-SD-1.0
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
+0.1
-0
4.0±0.1
2.0±0.1
ø1.5
0.23±0.1
1.4±0.2
+0.25
ø1.0
-0
4.0±0.1
3.2±0.2
1
2
3
Feed direction
No. MP003-C-C-SD-2.0
TITLE
SOT233-C-Carrier Tape
MP003-C-C-SD-2.0
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
12.5max.
9.2±0.5
Enlarged drawing in the central part
ø13±0.2
No. MP003-Z-R-SD-1.0
SOT233-Z-Reel
MP003-Z-R-SD-1.0
TITLE
No.
SCALE
UNIT
3,000
QTY.
mm
SII Semiconductor Corporation
2.9±0.2
1.9±0.2
4
5
+0.1
-0.06
1
2
3
0.16
0.95±0.1
0.4±0.1
No. MP005-A-P-SD-1.2
TITLE
SOT235-A-PKG Dimensions
MP005-A-P-SD-1.2
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
4.0±0.1(10 pitches:40.0±0.2)
+0.1
-0
2.0±0.05
0.25±0.1
ø1.5
+0.2
-0
4.0±0.1
ø1.0
1.4±0.2
3.2±0.2
3
4
2 1
5
Feed direction
No. MP005-A-C-SD-2.1
TITLE
SOT235-A-Carrier Tape
MP005-A-C-SD-2.1
No.
SCALE
UNIT
mm
SII Semiconductor Corporation
12.5max.
9.0±0.3
Enlarged drawing in the central part
ø13±0.2
(60°)
(60°)
No. MP005-A-R-SD-1.1
TITLE
SOT235-A-Reel
MP005-A-R-SD-1.1
No.
SCALE
UNIT
QTY.
3,000
mm
SII Semiconductor Corporation
4.5±0.1
1.6±0.2
1.5±0.1
1
2
3
1.5±0.1 1.5±0.1
0.4±0.05
45°
0.4±0.1
0.4±0.1
0.45±0.1
No. UP003-A-P-SD-1.1
TITLE
No.
SOT893-A-PKG Dimensions
UP003-A-P-SD-1.1
SCALE
UNIT
mm
SII Semiconductor Corporation
4.0±0.1(10 pitches : 40.0±0.2)
+0.1
-0
ø1.5
2.0±0.05
+0.1
-0
ø1.5
0.3±0.05
2.0±0.1
8.0±0.1
5° max.
4.75±0.1
Feed direction
No. UP003-A-C-SD-1.1
TITLE
No.
SOT893-A-Carrier Tape
UP003-A-C-SD-1.1
SCALE
UNIT
mm
SII Semiconductor Corporation
16.5max.
13.0±0.3
Enlarged drawing in the central part
(60°)
(60°)
No. UP003-A-R-SD-1.1
TITLE
No.
SOT893-A-Reel
UP003-A-R-SD-1.1
SCALE
UNIT
QTY.
1,000
mm
SII Semiconductor Corporation
Disclaimers (Handling Precautions)
1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and
application circuit examples, etc.) is current as of publishing date of this document and is subject to change without
notice.
2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of
any specific mass-production design.
SII Semiconductor Corporation is not responsible for damages caused by the reasons other than the products or
infringement of third-party intellectual property rights and any other rights due to the use of the information described
herein.
3. SII Semiconductor Corporation is not responsible for damages caused by the incorrect information described herein.
4. Take care to use the products described herein within their specified ranges. Pay special attention to the absolute
maximum ratings, operation voltage range and electrical characteristics, etc.
SII Semiconductor Corporation is not responsible for damages caused by failures and/or accidents, etc. that occur
due to the use of products outside their specified ranges.
5. When using the products described herein, confirm their applications, and the laws and regulations of the region or
country where they are used and verify suitability, safety and other factors for the intended use.
6. When exporting the products described herein, comply with the Foreign Exchange and Foreign Trade Act and all
other export-related laws, and follow the required procedures.
7. The products described herein must not be used or provided (exported) for the purposes of the development of
weapons of mass destruction or military use. SII Semiconductor Corporation is not responsible for any provision
(export) to those whose purpose is to develop, manufacture, use or store nuclear, biological or chemical weapons,
missiles, or other military use.
8. The products described herein are not designed to be used as part of any device or equipment that may affect the
human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems,
combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment,
aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle
use or other uses. Do not use those products without the prior written permission of SII Semiconductor Corporation.
Especially, the products described herein cannot be used for life support devices, devices implanted in the human
body and devices that directly affect human life, etc.
Prior consultation with our sales office is required when considering the above uses.
SII Semiconductor Corporation is not responsible for damages caused by unauthorized or unspecified use of our
products.
9. Semiconductor products may fail or malfunction with some probability.
The user of these products should therefore take responsibility to give thorough consideration to safety design
including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing
injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction.
The entire system must be sufficiently evaluated and applied on customer's own responsibility.
10. The products described herein are not designed to be radiation-proof. The necessary radiation measures should be
taken in the product design by the customer depending on the intended use.
11. The products described herein do not affect human health under normal use. However, they contain chemical
substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips
may be sharp. Take care when handling these with the bare hands to prevent injuries, etc.
12. When disposing of the products described herein, comply with the laws and ordinances of the country or region where
they are used.
13. The information described herein contains copyright information and know-how of SII Semiconductor Corporation.
The information described herein does not convey any license under any intellectual property rights or any other
rights belonging to SII Semiconductor Corporation or a third party. Reproduction or copying of the information
described herein for the purpose of disclosing it to a third-party without the express permission of SII Semiconductor
Corporation is strictly prohibited.
14. For more details on the information described herein, contact our sales office.
1.0-2016.01
www.sii-ic.com
相关型号:
©2020 ICPDF网 联系我们和版权申明