PE210G2BPI9-SRD-SD [SILICOM]
Dual Port Fiber 10 Gigabit Ethernet PCI Express Bypass Server Adapter;型号: | PE210G2BPI9-SRD-SD |
厂家: | Silicom |
描述: | Dual Port Fiber 10 Gigabit Ethernet PCI Express Bypass Server Adapter PC |
文件: | 总10页 (文件大小:812K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PE210G2BPI9 Ethernet Bypass
Dual Port Fiber 10 Gigabit Ethernet PCI Express Bypass Server Adapter Intel® 82599ES Based
Product Description
Silicom’s dual port fiber 10 Gigabit Ethernet Bypass server adapter
is a PCI-Express X8 network interface card that contains two fiber
(SR)10 Gigabit Ethernet ports on a PCI-E adapter.
The Silicom’s dual port fiber (SR) 10 Gigabit Ethernet Bypass
server adapter is targeted to inline network system that maintains
network connectivity when system fails.
Silicom’s dual port fiber 10 Gigabit Ethernet Bypass server adapter supports Normal, Bypass and Disconnect modes. In Normal
mode, the ports are independent interfaces.
In Bypass mode, all packets received from one port are transmitted to the adjacent port. In Disconnect mode, the adapter simulates
switch / rout cable disconnection.
Silicom Bypass server adapters can Bypass or disconnect its Ethernet ports on a host system failure, power off, or upon software
request. In Bypass mode, the connections of the Ethernet ports are
disconnected from the system and switched over to the other port to create
a crossed connection loop-back between the Ethernet ports.
Hence, in bypass mode all packets received from one port are transmitted
to the adjacent port and vice versa. This feature enables to bypass a failed
system and provides maximum up time for the network. Silicom’s dual port
fiber 10G PCI Bypass server adapter includes an on board WDT (Watch
Dog Timer) controller.
The adapter’s software drivers or software application can write commands
to the on board WDT controller.
The adapter’s software drivers, WDT controller and the Bypass circuitry provide an interface that control and manage the mode of
the adapter.
Silicom’s dual port fiber 10 Gigabit Ethernet Bypass server adapters are based on Intel 82599ES Ethernet controller.
1Page
Silicom Ltd. Connectivity Solutions
Key Features
Bypass / Disconnect:
Bypass / Disconnect Ethernet ports on Power Fail, System Hangs or Software Application Hangs
Software programmable Bypass, Disconnect or Normal Mode
On Board Watch Dog Timer (WDT) Controller.
Software programmable time out interval.
Software Programmable WDT Enable / Disable counter.
Software programmable Bypass Capability Enable / Disable.
Software Programmable Disconnect Capability Enable / Disable.
Software Programmable mode (Bypass, Normal or Disconnect mode) at Power up
Software Programmable mode (Bypass, Normal mode) at Power off
Independent Bypass operation in every two ports.
Emulates standard NIC
Fiber 10 Gigabit Ethernet 10GBASE-SR:
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
10 Gigabit 850nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-LR:
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
10 Gigabit 1310nM Small form Factor Pluggable (SFP+)
Fiber 10 Gigabit Ethernet 10GBASE-SR5 (SR 50uM):
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
10 Gigabit 850nM Small form Factor Pluggable (SFP+)
-SRD: Fiber 1/10 Gigabit Ethernet 1000Base-SX / 10GBASE-SR:
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
1Gigabit Fiber Ethernet port supports 1000BASE-SX (850nM LAN PHY)
1/10Gigabit 850nM Small form Factor Pluggable (SFP+)
-LRD: Fiber 1/10 Gigabit Ethernet 1000Base-LX / 10GBASE-LR:
10 Gigabit Fiber Ethernet port supports 10GBASE-LR (1310nM LAN PHY)
1Gigabit Fiber Ethernet port supports 1000BASE-LX (1310nM LAN PHY)
1/10Gigabit 1310nM Small form Factor Pluggable (SFP+)
2Page
Silicom Ltd. Connectivity Solutions
Fiber 10 Gigabit Ethernet 10GBASE-SR5 (SR 50uM):
10 Gigabit Fiber Ethernet port supports 10GBASE-SR (850nM LAN PHY)
10Gigabit 850nM Small form Factor Pluggable (SFP+)
Performance Features:
IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload
Fragmented UDP checksum offload for Packet Reassembly
CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC)
Support for 16 virtual machine Device Queues ( VMDq) per port
Support Direct Cache Access ( DCA)
Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other
packets going to the wire
Minimized device I/O interrupts using MSI and MSI-X
Offload of TCP / IP / UDP checksum calculation and TCP segmentation
Large on chip receive packet buffer (512 KB)
Large on chip transmit packet buffer ( 160 KB)
Supports the VPD (Vital Product Data) capability defined in the PCI specification ver. 3.0.
Time sync- IEEE1588- Precision Time Protocol (PTP)
Supports the BCN (Backward Congestion Notification) protocol in addition to the EEDC functionality
Host Interface:
PCI Express X8 lanes
Support PCI Express Base Specification 2.0 (5GT/s)
Common Key Features:
IEEE 802.x flow control support
IEEE 802.q VLAN tagging support
Supports a mode where all received and sent packets have at least one VLAN tag in addition to the regular tagging
IEEE 802.1p layer 2 priority encoding
Jumbo Frame (up to 16KB)
Link Aggregation and Load Balancing
RFC2819 RMON MIB statistics
TCP Segmentation Offload Up to 256KB
Ipv6 Support for IP/TCP Receive Checksum Offload
DDP Offload
LEDs indicators for link/Activity/Bypass/ Disconnect Mode status
3Page
Silicom Ltd. Connectivity Solutions
Hot Plug not supported. Can be supported by assembly change
Low power
LC connector
Technical Specifications
Bypass Specifications:
3,276,800 mSec (3,276.8 Sec): Maximum
100 mSec ( 0.1 Sec) : Minimum
WDT Interval (Software
Programmable):
WDT Interval = (2^wdt_interval_parameter)*(0.1) sec.
wdt_interval_parameter: { Valid Range: 0-15}
Fiber 10 Gigabit Ethernet Technical Specifications – (10Base-SR) Adapters:
IEEE Standard / Network
Fiber 10 Gigabit Ethernet, 10G BASE-SR (850nM)
topology:
Data Transfer Rate:
10.3125GBd
Multimode fiber:
Cables and Operating distance:
Up to:
62.5um, 160MHz/Km 13m
62.5um, (OM1)200MHz/Km 16m
*Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3-2005 standard
Normal Mode (Bypass Off):
Optical Output Power:
Typical: -3.1dBm (TX –Switch Normal – Fiber – LC/LC)
Minimum: -7.3 dBm
Normal Mode (Bypass Off)
Typical: -15.37 dBm
Optical Receive Sensitivity:
Maximum: -11 dBm
Bypass Mode:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Typical: 0.39 dB (From RX to TX)
Insertion Loss:
Maximum 1.6 dB
Fiber 10 Gigabit Ethernet Technical Specifications – (10Base-LR) Adapters:
IEEE Standard / Network
Fiber 10 Gigabit Ethernet, 10G BASE-LR (1310nM LAN PHY)
topology:
4Page
Silicom Ltd. Connectivity Solutions
Data Transfer Rate:
10.3125GBd
Cables and Operating distance:
Up to:
Single-Mode: 5000m at 9um*
Defined as half a distance as stated by the IEEE 802.3 standard
Normal Mode (Bypass Off):
Minimum: -5.2 dBm
Optical Output Power:
Normal Mode (Bypass Off)
Maximum: -12.6 dBm
Optical Receive Sensitivity:
Bypass Mode:
Insertion Loss:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Maximum 0.5 dB
– SRD: Fiber 1000BASE-SX / 10GBASE-SR Technical Specifications:
Optical Output Power (1G):
Optical Receive Sensitivity (1G):
Insertion Loss (1G)
Minimum: -10.9 dBm
Maximum: -15.6 dBm
Maximum: +1.9 dBm
Minimum: -7.3 dBm
Output Transmit Power (10G):
Optical Receive Sensitivity
(10G):
Maximum: -11 dBm
Maximum: 1.6 dBm
Insertion Loss (10G):
– LRD: Fiber 1000BASE-LX / 10GBASE-LR Technical Specifications:
Optical Output Power (1G):
Optical Receive Sensitivity (1G):
Insertion Loss (1G):
Minimum: -10.8 dBm m
Maximum: -19 dBm
Maximum: +0.5dBm
Minimum: -5.2dBm
Output Transmit Power (10G):
Optical Receive Sensitivity
(10G):
Maximum: –12.6 dBm
Insertion Loss (10G):
Maximum: +0.5 dBm
5Page
Silicom Ltd. Connectivity Solutions
Fiber Gigabit Ethernet Technical Specification – (10G Base-SR5 50uM) Adapters:
IEEE Standard / Network
Fiber Gigabit Ethernet, 1000Base-SR (850nM)
topology:
Data Transfer Rate:
10.3125GBd
Multimode fiber:
62.5um, 160MHz/Km 26m
62.5um, (OM1)200MHz/Km 33m
50um, 400MHz/Km 66m
Cables and Operating distance:
50um, (OM2)500 MHz/Km 82m
50um, (OM3)2000MHz/Km 300m
Normal Mode (Bypass Off):
Optical Output Power:
Typical: -3.27 dBm (TX Switch Normal – Fiber – LC/LC)
Minimum: -6.3 dBm
Normal Mode (Bypass Off)
Typical: -15.37 dBm
Optical Receive Sensitivity:
Maximum: -7.5 dBm
Bypass Mode:
Insertion loss (Optical Power attenuation between TX to RX) (LC- fiber- switch- LC)
Maximum 1.8 dB
Insertion Loss:
Typical: 0.78 dB (From RX to TX)
Operating Systems Support:
Operating system support:
Windows
Linux
FreeBSD
VMware
Hyper-V
General Technical Specifications
Interface Standard:
PCI-Express Base Specification Revision 2.0 (5GT/s)
Board Size:
Low profile add-in card: 167.65mm X 68.91mm (6.60”X 2.713”)
PCI Express Card Type:
PCI Express Voltage:
X8 Lane
+12V ± 15%
6Page
Silicom Ltd. Connectivity Solutions
PCI Connector:
Controller:
Holder:
Gold Finger: X8 Lane
Intel 82599ES
Metal Bracket
I/O:
LC located on internal bracket
200g (7.055Oz)
Weight:
PE210G2BPI9-SR
6.6 W, 0.55 A at 12V: Typical all ports operate at 10Gb/s, (Normal Mode).
6.12 W, 0.51 A at 12V: Typical Bypass Mode.
6.36 W, 0.53 A at 12V: Typical No link at all ports
Power Consumption:
Operating Humidity:
Operating Temperature:
Storage:
0%–90%, non-condensing
0°C – 50°C (32°F – 122°F)
-20°C–65°C (-4°F–149°F)
FCC 47CFR Part 15:2013, Subpart B Class B
Conducted emissions
Radiated emissions
EN 55022: 2010, Class B
Conducted disturbance at mains terminals
Conducted disturbance at telecommunication port
Radiated disturbance
EN 61000-3-2: 2006+A1(09)+A2(09)
Harmonic current emissions
EMC Certifications:
EN 61000-3-3: 2008
Voltage fluctuations and flicker
EN 55024: 2010
Immunity to electrostatic discharge (ESD)
Radiated immunity to radio frequency electromagnetic field
Conducted immunity to electrical fast transients / bursts (EFT/ B)
Conducted immunity to voltage surges
Conducted immunity to disturbances induced by radio frequency field
Conducted immunity to voltage dips and short interruptions
71 (Years)
MTBF*:
* According to Telcordia SR-332 Issue 2
Environmental condition – GB (Ground, Fixed, Controlled).
7Page
Silicom Ltd. Connectivity Solutions
Ambient temperature 40°C
LEDs
(2) LED per port
Link: Turns on Blue on 10G link.
Turns on Green on 1G link
ACT: Blinks on activity (green).
Bi-color LED per Bypass pair:
BYPASS: Turns on Green on Bypass
Disconnect : Turns on Yellow on Disconnect
Normal: Off
LEDs:
LEDs location:
Connectors:
LEDs are located on the PCB, visible via holes in the metal bracket holder
(2) LC
Functional Description
Silicom’s Bypass Server adapters support Normal, Bypass and Disconnect modes.
In Normal mode, the ports are independent interfaces (see Figure 1: Normal mode, one Bypass pair is illustrated).
Figure 1: Normal Mode Functional Block Diagram
In Bypass mode, the connections of the Ethernet network ports are Disconnected from the interfaces and switched over to the other
port to create a crossed connection loop-back between the Ethernet ports. The connections of the interfaces are left not connected.
(See Figure 2: one Bypass pair illustrated)
8Page
Silicom Ltd. Connectivity Solutions
Figure 2: Bypass Mode Functional Block Diagram
In Disconnect mode, the transmit connections of the Ethernet network ports are Disconnected from the interfaces. (See Figure 3:
one Bypass pair illustrated)
Figure 3: Disconnect Mode Functional Block Diagram
Silicom Bypass server adapters include an on board Controller that can Bypass the Ethernet ports on host system failure like
Power Off, System hangs or software application hangs. The software programmable Watch Dog Timer (WDT) Controller detects a
host system fails and it will Bypass automatically the Ethernet ports after programmable time out interval. The WDT Controller can
be software programmable enabled or disabled.
Silicom Bypass server adapters support software programmable to select Bypass or Normal mode. In Normal mode, the ports of
the adapters remain independently operational.
The drivers of the adapters and the Bypass circuitry provides an interface that control and management the mode of the adapter.
The adapter software driver or software application can writes commands to the on board controller. The on board controller
processes the commands and activates the bypass circuitry accordingly.
9Page
Silicom Ltd. Connectivity Solutions
After power up the default mode of the adapter is to be in Bypass mode. After driver is loaded, the adapter software driver or
application can set the card to a Normal mode. After the Host system issues reset, setting of Bypass controller and circuitry are
reserved.
Silicom Bypass server adapters support Disable Bypass Capability; hence, if those adapters receive Disable Bypass Capability
command, the adapter does not Bypass its Ethernet ports, in this state the four Ethernet ports are independent. The Disable
Bypass Capability state is reserved also after power off. This feature enables to emulate a standard NIC.
Silicom Bypass server adapters can be set to Bypass or Normal mode at power up. This setting programmable and is reserved also
after power off.
Order Information
P/N
Description
Notes
Dual Port Fiber (SR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 2, Based on Intel 82599ES, on board
support for Fiber SR, RoHS compliant
PE210G2BPI9-SR-SD
Dual Port Fiber (LR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 2, Based on Intel 82599ES, on board
support for Fiber LR, RoHS compliant
PE210G2BPI9-LR-SD
PE210G2BPI9-SRD-SD
PE210G2BPI9-LRD-SD
PE210G2BPI9-SR5-SD
Dual Port Fiber (SX/SR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 2, Based on Intel 82599ES, on board
support for Fiber SX/SR, RoHS compliant
Dual Port Fiber (LX/LR) 10 Gigabit Ethernet PCI
Express Bypass Server Adapter
X8 Gen 2, Based on Intel 82599ES, on board
support for Fiber LX/LR, RoHS compliant
Dual Port Fiber (SR 50uM) 10 Gigabit Ethernet PCI X8 Gen 2, Based on Intel 82599ES, on board
Express Bypass Server Adapter support for Fiber SR5, RoHS compliant
1V7
10Page
Silicom Ltd. Connectivity Solutions
相关型号:
©2020 ICPDF网 联系我们和版权申明