AMS001-S_技术文档

AMS00x • Embedded Bluetooth Low Energy Solutions

AMS001 / AMS002

Data Sheet

ADS-MS00x-107R • Preliminary Data Sheet

September 14, 2015

AMS00x • Embedded Bluetooth Low Energy Solution

Disclaimer

Contact

While the information provided in this document is be-

lieved to be accurate, it is under development and

ACKme Networks reserves the right to make changes

without further notice to the product described herein

to improve reliability, function, or design, and makes no

guarantee or warranty concerning the accuracy of said

information, nor shall it be responsible for any loss or

damage of whatever nature resulting from the use of,

or reliance upon, such information. ACKme Networks

makes no warranties of any kind, whether express, im-

plied or arising by custom or course of trade or perfor-

mance, and specifically disclaims the implied warranties

of title, non-infringement, merchantability, or fitness for

a particular purpose.

http://ack.me/contact

About this Data Sheet

This document provides information on the family of

AMS00x Bluetooth Low Energy (Bluetooth Smart) mod-

ules from ACKme Networks.

Organization

This data sheet is organized into the following sections:



Features & Applications

General Description, Section 1

Block Diagram, Section 2

Electrical Specifications, Section 3

Bluetooth RF Specifications, Section 4

Pinout and Signal Descriptions, Section 5

Design Guidelines, Section 6

Regulatory Certification, Section 7

Packaging, Handling & Storage, RoHS, Section 8

Ordering Information, Section 9

Revision History & Glossary, Section 11

No part of this document may be copied, reproduced,

stored in a retrieval system, or transmitted, in any form

or by any means, electronic, mechanical, photographic,

or otherwise, or used as the basis for manufacture or

sale of any items without the prior written consent of

ACKme Networks.

Trademarks

ACKme Networks and the ACKme Networks logo are

trademarks of ACKme Networks. WICED™ is a trade-

mark of Broadcom® Corporation, Inc. Bluetooth® is a

trademark of the Bluetooth SIG. Other trademarks in

this document belong to their respective owners.

Document Number: ADS-MS00x-107R

Release Date: September 14, 2015

ADS-MS00x-107R • Preliminary Data Sheet

Page | i

September 14, 2015

AMS00x Family Data Sheet

Embedded Bluetooth Low Energy Solution

Features

Operational & Radio

 Bluetooth Low Energy (Bluetooth Smart) modules

fully certified to meet Bluetooth version 4.1.

 Integrated 8 Mbit SPI-serial flash supports firm-

ware updates and multiple on-board applications

 On-board PCB-style antenna

 Operational voltage : 1.8V - 3.6V

 Operational Temperature Range: -30°C to +85°C

 Size : 17.6 x 11.4 x 2.4mm (0.70” x 0.45” x 0.10”)

 Weight : 0.04 oz (1.2g)

 Current consumption @ 3.0V, 25°C

 ARM® Cortex™ M3-based microprocessor core

 Adaptive Frequency Hopping (AFH)

 Programmable RF transmit power control

 Operation directly from a battery or mains supply

 Small size enables integration into most sensor

products and applications

 Secure Over-the-Air (OTA) software update using

industry-standard AES-128 security

 Easily integrated into existing or new products us-

ing TruConnect, ACKme’s configurable Bluetooth

Low Energy application (pre-installed on every

module)

-

Deep Sleep : 1.65µA (typ.)

Sleep : 12 µA

AMS001

. Active Receive : 12.8 mA

. Active Transmit : 10.8 mA

AMS002

. Active Receive : 26.6 mA

. Active Transmit : 22.0 mA

-

 RF Transmit Power: +4 dBm (max.)

 Receive Sensitivity : -94 dBm

Applications

 Health & Fitness

 Multiple services including ACKme TruConnect,

Beacon, iBeacon, plus more …

-

Fitness Equipment

Heart rate monitors

Weight scales

Thermometers

Pedometers

Glucose meters

Blood pressure monitoring

Interfaces*

 A/D converter: 7 channels with 4 modes providing

variable resolution (10-13 ENOBs), sampling rate

(5.9-187 kHz) and conversion latency (5-171 µs)

 USART: 1 x 4-wire up to 1.5 Mbit/s for general use,

1 x 2-wire for in-circuit programming

 Retail

-

Advertising and Beaconing

Proximity detection

Point-of-sale

 SPI: 1 x master, 1 x slave at ≤12 Mbit/s

 I²C: 1 x I²C master interface up to 1 MHz

 GPIO: Up to 12 GPIOs (overlaid with peripherals),

programmable pull-up/pull-down resistors with

16 mA drive strength at 3.3V (2 mA standard).

 4 x PWM channels each with a 10-bit counter

clocked at 128 kHz.

 Home & Industrial Control and Automation

-

Appliance control and monitoring

Doors/Window monitoring

Alarms

Wireless cable replacement

Environmental & Energy monitoring

Wireless sensing, remote data logging

 Wake-up: Wake from GPIO for ultra-low power

operation.

^*Some interfaces share module pins

 Consumer

-

Toys

-

Robots

Remote controls

ADS-MS00x-107R • Preliminary Data Sheet

Page | ii

September 14, 2015

AMS00x • Embedded Bluetooth Low Energy Solution

Contents

1

2

3

General Description ...............................................1

Labeling

and

User

Information

Requirements.......................................................14

RF Exposure ..........................................15

External Antenna..................................15

Further Information..............................15

Block Diagram ........................................................2

Electrical Specifications..........................................3

3.1

Absolute Maximum Ratings............................3

Recommended Operating Conditions ............3

DC Operating Conditions ........................3

Environmental Conditions ......................4

Power Consumption .......................................4

Input/Output Pins...........................................5

ADC Specifications..........................................5

3.2

7.2

Canada..........................................................15

Labeling and User Information

Requirements.......................................................15

External Antenna Types........................16

Further Information..............................16

3.3

3.4

3.5

7.3

Europe ..........................................................17

4

Bluetooth RF Specifications ...................................6

Labeling and User Information

4.1

Summary RF Specifications.............................6

Receiver Specifications...................................6

Transmitter Specifications..............................7

Requirements.......................................................17

External Antenna Requirements ..........17

Further Information..............................17

4.2

4.3

5

6

Pinout and Signal Descriptions ..............................8

7.4

Australia........................................................18

External Antenna Requirements ..........18

Further Information..............................18

New Zealand.................................................19

External Antenna Requirements ..........19

Further Information..............................19

5.1

5.2

Pinout..............................................................8

Pin Description................................................8

Design Guidelines.................................................10

7.5

6.1

Recommended PCB Footprint ......................10

Routing Recommendations ..........................10

Soldering Information...................................11

AMS00x Photograph.....................................11

Application Examples....................................12

UART Application for Configuration and

6.2

6.3

6.4

6.5

8

9

Packaging, Handling & Storage, RoHS .................20

8.1

Packaging......................................................20

Tape and Reel Specifications........................20

Handling & Storage.......................................22

RoHS Directive..............................................22

8.2

8.3

8.4

Streaming.............................................................12

6.6

Operation using TruConnect ........................12

Bootup Configuration ...........................12

Factory Reset ........................................13

Command and Stream Mode ...............13

GPIO Configuration & Usage ................13

Regulatory Certification.......................................14

Ordering Information...........................................23

10 Revision History & Glossary.................................24

10.1 Revision History............................................24

10.2 Glossary ........................................................24

7

7.1

United States ................................................14

ADS-MS00x-107R • Preliminary Data Sheet

Page | iii

September 14, 2015

General Description, Section 1

AMS00x • Embedded Bluetooth Low Energy Solution

1 General Description

The family of AMS00x ‘Bobcat’ modules from ACKme

Networks is based on an ultra-low power Bluetooth

Low Energy (Bluetooth Smart) SoC from Broadcom Cor-

poration. All modules incorporate serial-flash memory

and a printed antenna to provide a state-of-the-art ful-

ly-certified Bluetooth 4.1 solution.

Each module provides an extensive array of I/O and

peripheral interfaces. The following interfaces are

available, many of which are accessible with I/O multi-

plexing and alternate function capabilities:

7 x A/D converter channels



2 x UART interfaces: 1 x 4-wire, 1 x 2-wire

1 x SPI master, 1 x SPI slave bus

1 x I²C interface

Up to 12 x ultra-low power wake input

32kHz crystal interface

An integrated solution avoids difficult RF layout and

enables designers to rapidly embed Bluetooth Low En-

ergy into virtually any device.

The AMS001 (Low Power) version slashes active power

consumption for applications requiring multi-year bat-

tery life, while the AMS002 (Low Cost) version provides

the lowest cost solution suitable for price sensitive ap-

plications. The modules are 100% footprint compatible.

The module may be powered directly from a battery

supply in the range 1.8-3.6V including 2xAAA, 2xAA, or

a single Lithium coin cell.

Internal power domains are automatically adjusted to

minimize power dissipation based on user activity. Var-

ious power modes, including an ultra-low power deep

sleep mode, are provided to minimize total average

power consumption and maximize battery life.

Modules ship with ACKme TruConnect, an easy-to-use

application enabling control and configuration via

UART-serial and remote terminal interfaces. TruCon-

nect virtually eliminates difficult and time-consuming

software development effort and vastly reduces prod-

uct development cycles.

Custom factory settings may be saved to a non-erasable

area of static memory to enable out-of-the-box custom

product configuration and the ability to return products

incorporating the module to a known factory reset

state.

With dimensions of just 17.6 x 11.4 mm, a wide tem-

perature range, and an ultra-low power version, the

module is suitable for integration into any battery-

powered embedded wireless application.

The module may be woken from deep sleep mode by a

level transition on the GPIO assigned for stream mode

selection. Other GPIOs may be dynamically allocated for

control and status including a BLE connection indicator,

serial bus mode control and status indicator, audible

alerts and factory reset.

The Bluetooth Low Energy SoC from Broadcom is pur-

pose-designed to support the entire spectrum of Blue-

tooth Smart use cases for medical, home automation,

accessory, sensor, retail and wearable market seg-

ments. Superior receive sensitivity, an integrated RF

transmit power amplifier and transmit/receive switch,

along with the on-board antenna, provide extended

range and full compatibility with all Bluetooth 4.1 de-

vices.

An internal 32kHz low-power oscillator is available by

default for non-critical timing requirements. Applica-

tions requiring an accurate real-time clock may connect

an (optional) external 32kHz crystal.

At the heart of all AMS00x modules is a Bluetooth Low

Energy SoC with a high-performance ARM® 32-bit Cor-

tex™-M3 core operating at a frequency of 24 MHz. The

SoC includes is configured to boot applications stored in

the 8 Mbit serial flash memory available on-board the

module.

All versions of the module have Bluetooth BQB SIG cer-

tification, and FCC & IC modular approval for use in the

United States and Canada, and CE approval for use in

Europe and other countries.

The Broadcom BLE SoC supports Adaptive Frequency

Hopping.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 1

September 14, 2015

Block Diagram, Section 2

AMS00x • Embedded Bluetooth Low Energy Solution

2 Block Diagram

Figure 1 is a block diagram showing the architecture of

AMS00x Bluetooth Low Energy modules. The major

components are a Bluetooth Low Energy SoC from

Broadcom, 24MHz crystal, 8 Mbit serial flash and a PCB-

style antenna. The AMS001 version also includes a high-

efficiency DC-DC switching regulator to significantly re-

duce active mode power consumption.

The 8 Mbit serial flash memory stores the ACKme

TruConnect™ application and user configuration, and

enables secure Over-the-Air (OTA) wireless firmware

updates. The on-board PCB antenna simplifies RF inte-

gration into end products.

An extensive array of analog and digital peripherals in-

cluding ADCs, GPIOs, PWMs and multiple serial inter-

faces such as UART, SPI and I2C are accessible via mod-

ule pins.

The Bluetooth SoC is powered by an ARM Cortex M3-

based processor running at 24 MHz. The SoC is driven

by a 24 MHz crystal, an on-board real-time clock may

be (optionally) enabled by connecting an external

32kHz crystal.

The module is powered by a single-rail battery or mains

supply.

Figure 1. AMS00x Architecture

VDD

32kHz XTAL

Bluetooth

Low Energy

24MHz

SPI

UART

SoC

I2C

8 Mbit

ARM Cortex M3

Serial Flash

ADC

GPIO

PWM

Reset

DC-DC

AMS001

Only

AMS00x

ADS-MS00x-107R • Preliminary Data Sheet

Page | 2

September 14, 2015

Electrical Specifications, Section 3

AMS00x • Embedded Bluetooth Low Energy Solution

3 Electrical Specifications

3.1 Absolute Maximum Ratings

CAUTION! The absolute maximum ratings in Table 1 and Table 2 indicate levels where permanent damage to the de-

vice can occur, even if these limits are exceeded for only a brief duration. Functional operation is not guaranteed un-

der these conditions. Operation at absolute maximum conditions for extended periods can adversely affect long-

term reliability of the device.

Table 1. Absolute Maximum Voltage Ratings

Symbol

VDD_max

V_IO

Ratings

Min.

Max.

3.8

Unit

V

DC supply voltage applied to VDD pin

Voltage on input or output pin

GND - 0.3

VDD_max+ 0.3

V

Table 2. Absolute Maximum Environmental Ratings

Characteristic

Storage Temperature

Relative Humidity

Note

Min.

-40

–

Max.

+125

65

Unit

°C

–

Non-condensing (storage)

%

3.2 Recommended Operating Conditions

Functional operation is not guaranteed outside the limits shown in Table 3 and Table 4, and operation outside these

limits for extended periods can adversely affect long-term reliability of the device.

DC Operating Conditions

Table 3. Recommended DC Operating Conditions

Symbol

Ratings¹

Min.

Typical

Max.

Unit

VDD

DC supply voltage applied to VDD pin

On-board serial flash read-only

On-board serial flash read and write

On-board serial flash at power-on

1.8

2.1

2.25²

–

3.63

V

Notes:

1. Overall performance degrades beyond minimum and maximum supply voltages.

2. The module may fail to boot if this condition is not met when power is initially applied.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 3

September 14, 2015

Electrical Specifications, Section 3

AMS00x • Embedded Bluetooth Low Energy Solution

Environmental Conditions

Table 4. Recommended Environmental Conditions

Characteristic

Ambient Temperature

Relative Humidity

Note

Min.

-30

–

Max.

+85

85

Unit

°C

Non-condensing (operating)

%

3.3 Power Consumption

The AMS00x automatically adjusts power dissipation based on user activity to minimize power usage. The power

consumption in each state, and for each version of the module, is specified in Table 5.

Table 5. Power Consumption (3.0V, 25°C)

Operational State Note

Typical

1.65

Unit

µA

Deep sleep¹

BLE Chip (0.65 µA) + Serial Flash (1 µA)

Sleep

Wake in <5ms

12.0

µA

AMS001

Active Receive

Receiver enabled and operating at 100% duty cycle

12.8

10.8

mA

Active Transmit²Transmitter enabled and operating at 100% duty cycle

AMS002

Active Receive

Receiver enabled and operating at 100% duty cycle

26.6

22.0

mA

Active Transmit²Transmitter enabled and operating at 100% duty cycle

Notes:

1. Requires 10K pullup resistor on module pin 6. See 6.5.1, UART Application for Configuration and Streaming

2. RF transmit power = 0dBm

ADS-MS00x-107R • Preliminary Data Sheet

Page | 4

September 14, 2015

Electrical Specifications, Section 3

AMS00x • Embedded Bluetooth Low Energy Solution

3.4 Input/Output Pins

All digital I/O pins have a maximum input voltage rating of VSS-0.3V to VDD+0.3V.

The maximum supply voltage is 3.63V.

Consequently, digital I/O pins are NOT +5V tolerant.

Table 6. Digital I/O Pin Levels

Symbol

V_IL

Description

Min.

Typical

Max.

0.4

–

Unit

V

Input low voltage

Input high voltage

Output low voltage¹

Output high voltage¹

–

V_IH

0.75 x VDD

–

V

V_OL

0.4

–

V

V_OH

VDD – 0.4

V

Notes:

1. At the specified drive current for the pin.

3.5 ADC Specifications

Table 7. ADC Specifications (@ 25°C)

Parameter

Symbol Conditions

Min.

Typ.

Max.

–

Unit

–

Input Channels

–

f_ch

V_inp

–

8

Channel Switching Rate

Input signal range

Reference settling time

Input resistance

133.33

–

kch/s

V

0

–

3.63

–

7.5

–

µS

R_in

C_in

Effective, single ended

500

–

kΩ

pF

Input capacitance

Conversion rate

–

5

R_c

5.859

5.35

10

–

187

170.7

13

–

kHz

µS

Conversion time

Tc

–

Effective Number of Bits

Abs. Voltage Meas. Error

Current

ENOB

–

bits

%

±2

–

I

–

1

mA

nA

µS

Leakage Current

I_leakage

T_pup

I_NL

–

100

200

1

Power-up time

–

Integral nonlinearity

Differential nonlinearity

LSBs at the 10-bit level

-1

–

LSB

D_NL

–

1

ADS-MS00x-107R • Preliminary Data Sheet

Page | 5

September 14, 2015

Bluetooth RF Specifications, Section 4

AMS00x • Embedded Bluetooth Low Energy Solution

4 Bluetooth RF Specifications

Unless otherwise stated, the specifications in this section apply when the operating conditions are within the limits

specified in Section 3.2, Recommended Operating Conditions. Functional operation outside these limits is not guar-

anteed.

All specifications are measured with a coax pigtail soldered to the PCB antenna feed point, with VDD = 3.0V and at a

room temperature of 25°C.

4.1 Summary RF Specifications

Table 8. Summary RF Specifications

Feature Supported

Bluetooth Standard

Frequency Band

Description

Version 4.1

2.400 GHz – 2.500 GHz

Channels (2MHz spacing)

3 x Advertising channels @ 2402 / 2426 / 2480 MHz

36 x Data channels

Maximum Raw Data Rate

Maximum Application Data Rate

Modulation Type

1 Mbit/s

0.27 Mbit/s

DSSS: GFSK (modulation index = 0.5)

Maximum RF Input

-10 dBm

Typical Receive Sensitivity

Maximum RF Tx Output Power

Carrier Frequency Accuracy

-94 dBm

+4 dBm

±20 ppm (24 MHz crystal, ±20 ppm stability @ 25°C)

4.2 Receiver Specifications

Table 9. Receiver Performance Specifications

Parameter

Frequency Range

Condition/Notes

Min.

2402

-30

–

Typical

Max.

2480

+85

–

Unit

MHz

°C

–

Operating Temperature

Receive Sensitivity

–

200 x 37-byte packets with 30.8% PER

-94

–

dBm

Maximum Receive Level

-10

–

ADS-MS00x-107R • Preliminary Data Sheet

Page | 6

September 14, 2015

Bluetooth RF Specifications, Section 4

AMS00x • Embedded Bluetooth Low Energy Solution

4.3 Transmitter Specifications

Table 10. Transmitter Performance Specifications

Parameter

Frequency Range

Condition/Notes

Min

2402

-30

–

Typical

Max

2480

+85

–

Unit

MHz

°C

–

Operating Temperature

Transmit power²

–

4.0

2.0

dBm

Transmit power variation

Transmit Power Range

Channel Spacing

Process dependent

–

Adjustable via software control

-20

–

4

dBm

MHz

2

–

ADS-MS00x-107R • Preliminary Data Sheet

Page | 7

September 14, 2015

Pinout and Signal Descriptions, Section 5

AMS00x • Embedded Bluetooth Low Energy Solution

5 Pinout and Signal Descriptions

5.1 Pinout

A top view of the AMS00x pinout is depicted in Figure 2.

All dimensions are in thousands of an inch. A recom-

mended PCB footprint is provided in Section 6.1.

Figure 2. AMS00x Pinout (TOP View – Pins NOT visible from top!)

5.2 Pin Description

Table 11. AMS00x Pin Definitions

1

Name

Type¹Primary Function

Alternate & Other Function(s)

GND

S

I

Ground

-

2

PROG_RX

PROG_TX

GPIO_0

PROG RX

PROG TX

Reserved⁴

3

O

4

I/O

Not available as digital I/O. Reserved for future use as

SPI_MOSI, I2C_SDA

5

GPIO_1

I/O

Reserved⁴

Not available as digital I/O. Reserved for future use as

SPI_CLK, I2C_SCL

6

7

GPIO_2

GPIO_3

RESET_N

GPIO_4

GPIO_5

I/O

I

USER TX

SPI_MOSI (Slave), ADC, GPIO

SPI_MISO (Slave), ADC. , GPIO

-

USER_RTS

System Reset

USER_CTS

USER_RX

8

9

I/O

SPI_CLK (Slave), GPIO

SPI_CS (Slave), GPIO

10

ADS-MS00x-107R • Preliminary Data Sheet

Page | 8

September 14, 2015

Pinout and Signal Descriptions, Section 5

AMS00x • Embedded Bluetooth Low Energy Solution

Alternate & Other Function(s)

11

12

13

14

15

16

17

18

19

20

21

Name

Type¹Primary Function

GPIO_6

GPIO_7

GPIO_8

GPIO_9

GPIO_10²

GPIO_11

GPIO_12

GPIO_13²

GND

I/O

N/C

I/O

S

GPIO

Reserved⁴

SPI_MOSI (Master), FACTORY_RESET³

Reserved. Not available as digital I/O

GPIO

SPI_MISO (Master)

GPIO

SPI_CLK (Master)

GPIO

ADC, PWM

GPIO

ADC, PWM

GPIO

SPI_CS (Master), ADC

GPIO

ADC, PWM, XOSC32_OUT

Ground

GPIO

-

GPIO_14²

I/O

S

ADC, PWM, XOSC32K_IN

VDD

-

22-27 GND

S

Ground

Notes:

1. I = Input, O = Output, S = Supply

2. The drive strength of standard GPIOs is 2mA, the drive strength of this GPIO is 16mA.

3. The FACTORY_RESET pin may be moved to a different GPIO, but it may not be de-assigned

4. Connected to SPI serial flash inside the module

ADS-MS00x-107R • Preliminary Data Sheet

Page | 9

September 14, 2015

Design Guidelines, Section 6

AMS00x • Embedded Bluetooth Low Energy Solution

6 Design Guidelines

6.1 Recommended PCB Footprint

All dimensions in Figure 3 are in thousands of an inch unless otherwise marked.

Figure 3. AMS00x Recommended Footprint (Top)

6.2 Routing Recommendations

When designing a carrier board, the addition of

ground fill directly underneath the module, rather

than signal or power traces, is strongly advised.

265

115

All ground pads adjacent to antenna pins must be

connected to a solid ground plane. Do not route

ANY metal or PCB traces underneath the printed

PCB-antenna!

115

265

Failure to comply with these recommendations will

almost certainly result in degraded performance of

the radio receiver and/or transmitter.

Avoid routing traces not connected to ground under the

vias in the shaded rectangle.

Measurements are in thousandths of an inch.

For optimal range, provide a clearance of 5mm

(0.2”) above, below and to the front and sides of the

antenna end of the module.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 10

September 14, 2015

Design Guidelines, Section 6

AMS00x • Embedded Bluetooth Low Energy Solution

6.3 Soldering Information

Figure 4. Recommended solder reflow profile

6.4 AMS00x Photograph

Figure 5. AMS00x Photograph (Top)

ADS-MS00x-107R • Preliminary Data Sheet

Page | 11

September 14, 2015

Design Guidelines, Section 6

AMS00x • Embedded Bluetooth Low Energy Solution

6.5 Application Examples

UART Application for Configuration and Streaming

Follow the schematic in Figure 6 to connect a host MCU UART to the User UART serial interface of the AMS00x mod-

ule. This application enables a host MCU to configure the module using command mode, and transfer data back and

forth to a remote device via the Bluetooth LE wireless interface using stream mode. UART hardware flow control is

not required, but is recommended for streaming continuous data.

Figure 6. Connecting a Host MCU to the AMS001/AMS002 User UART

Note: The 10K pullup resistor on pin 6 allows the module to go to sleep and stay asleep. It also enables sleep current

to be reduced to a typical value of 1.65uA. If pin 6 is not driven high the wake-up circuit may be highly sensitive to

small variations in capacitance or voltage on module pins. Module sleep current may also remain higher, at around

200uA.

settings may be saved/changed as required, Factory

Settings may be saved only once, and Default settings

are hardcoded into the app at compile time and cannot

be changed. Configuration load at boot time occurs in

the following sequence:

6.6 Operation using TruConnect

The information in this section provides a very brief

overview of basic operation using TruConnect. For de-

tailed information, consult the TruConnect Reference

Guide available online at http://truconnect.ack.me

1. User Settings. This configuration is set by a user and

saved by the TruConnect savecommand without

any supplied arguments. User configuration can be

changed at any time, and the configuration is delet-

ed when a factory reset is performed. If no user

configuration is present or it is corrupted then

TruConnect attempts to load the factory settings.

Bootup Configuration

At boot up, TruConnect attempts to load saved configu-

ration settings i.e. the saved state of TruConnect varia-

bles. There are three configuration sets that may be

loaded, depending on the state of the module. User

ADS-MS00x-107R • Preliminary Data Sheet

Page | 12

September 14, 2015

Design Guidelines, Section 6

AMS00x • Embedded Bluetooth Low Energy Solution

2. Factory Settings. Factory configuration provides a

way to save a configuration at manufacturing time.

Factory settings are saved using the TruConnect

ured), or to simply transition from command mode to

stream mode, use the strcommand.

Once in stream mode, characters received from a host

MCU on the serial interface are automatically transmit-

ted to a remotely connected device via the BLE wireless

interface, and characters received from a remotely

connected device on the BLE wireless interface are

seamlessly transmitted on the serial interface to the

host MCU.

command:

save factory <BD_ADDR>

Save with the lockoption to ensure that factory

settings cannot be overwritten:

save factory <BD_ADDR> lock

CAUTION! The factory configuration cannot be

changed after saving with the lockoption.

If no factory configuration is present or it is corrupt-

ed, then TruConnect loads the basic compile-time

default configuration.

Configuration of the module is also possible using a re-

motely connected application, however if the serial in-

terface is configured to use command mode, remote

applications are forbidden from accessing the com-

mand interface. To grant a remote application access to

the command interface, the serial interface must first

place the module into stream mode to signal that it no

longer requires access to the command parser.

3. Default Settings. The default configuration is a

sane set of defaults that are hardcoded in TruCon-

nect.

Factory Reset

The module may be factory reset with a TruConnect

command, or by asserting the factory reset pin at

bootup.

GPIO Configuration & Usage

The default GPIO configuration of the module is shown

in the following list, obtained by issuing the TruConnect

command sequence get gp u. The User UART, factory

reset and I2C pins are configured by default. All other

pins are unassigned or reserved.

To factory reset via a command, issue:

> fac <BD_ADDR>

To factory reset via the factory reset GPIO:

> get gp u

1. Identify the GPIO used for factory reset by issu-

ing the command to get GPIO usage: get gp u

(the factory reset default is GPIO 6).

!

#

# Description

0 i2c_sda

1 i2c_scl

2 user_tx

3 none

2. Assert a logic 1 (high) on the pin associated

with the factory reset GPIO

3. Assert and de-assert the reset pin to force the

module to reboot

4. Wait at least 10 seconds (the status of factory

reset is printed to the User UART

5. De-assert the factory reset pin

4 none

5 user_rx

6 none,factory

7 reserved

8 none

9 none

# 10 none

# 11 none

# 12 none

# 13 none

# 14 none

Command and Stream Mode

The module boots into serial bus command mode by

default and accepts configuration and control com-

mands via the User UART. Once the configuration is

saved, stream mode may be used to transfer data be-

tween the serial interface and a remote device con-

nected to the Bluetooth LE wireless interface. To toggle

between command mode and stream mode, the GPIO

alternate function mode_sel may be used (if config-

To configure a GPIO pin for use, the pin must be as-

signed a function. A large range of functions is availa-

ble, please refer to the TruConnect reference guide

online (at the following link) for further information:

http://truconnect.ack.me/commands#gfu

ADS-MS00x-107R • Preliminary Data Sheet

Page | 13

September 14, 2015

Regulatory Certification, Section 7

AMS-00x • Embedded Bluetooth Low Energy Solution

7 Regulatory Certification

The AMS00x family of modules has been certified for

operation in various regulatory domains. This section

outlines certification information specific to the follow-

ing countries and regions:

Labeling and User Information

Requirements

The AMS-00x module has been labelled with a unique

FCC ID number, and if the FCC ID is not visible when the

module is installed inside another device, then the out-

side of the finished product into which the module is

installed must also display a label referring to the en-

closed module. This exterior label can use wording as

follows:



United States

Canada

Europe

Australia

New Zealand

Contains FCC ID: 2ABPY-BB4EA - Model No: AMS001

Contains FCC ID: 2ABPY-0D06E - Model No: AMS002

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause un-

desired operation.

Should you require regulatory certification for the

AMS00x module in a country or region not listed, please

contact your local ACKme Networks sales office or cre-

ate

a

support request via our website at

http://ack.me/contact.

7.1 United States

The ACKme Networks AMS-00x module has received

Federal Communications Commission (FCC) CFR47 Tele-

communications, Part 15 Sub-part C “Intentional Radia-

tors” modular approval in accordance with Part 15.212

Modular Transmitter approval. Modular approval al-

lows the end user to integrate the AMS-00x module

into a finished product without obtaining subsequent

and separate FCC approvals for intentional radiation,

provided no changes or modifications are made to the

module circuitry. Changes or modifications could void

the user’s authority to operate the equipment. The end

user must comply with all of the instructions provided

by the Grantee which indicate installation and/or oper-

ating conditions necessary for compliance.

The user manual for the product should include the fol-

lowing statement:

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate ra-

dio frequency energy and if not installed and used in

accordance with the instructions, may cause harm-

ful interference to radio communications. However,

there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment

does cause harmful interference to radio or televi-

sion reception, which can be determined by turning

the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

The finished product is required to comply with all ap-

plicable FCC equipment authorization, regulations, re-

quirements, and equipment functions not associated

with the transmitter module portion. For example,

compliance must be demonstrated to regulations for

other transmitter components within the host product;

to requirements for unintentional radiators (Part 15

Sub-part B “Unintentional Radiators”), such as digital

devices, computer peripherals, radio receivers, etc.; and

to additional authorization requirements for non-

transmitter functions on the transmitter module (i.e.

Verification, or Declaration of Conformity) (e.g., trans-

mitter modules may also contain digital logic functions)

as appropriate.



Reorient or relocate the receiving antenna.

Increase the separation between the equip-

ment and receiver.



Connect the equipment into an outlet on a cir-

cuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 14

September 14, 2015

Regulatory Certification, Section 7

AMS-00x • Embedded Bluetooth Low Energy Solution

Additional information on labeling and user information

requirements for Part 15 devices can be found in KDB

Publication 784748 available at the FCC Office of Engi-

neering and Technology (OET) Laboratory Division

Knowledge Database (KDB) at the following website:

https://apps.fcc.gov/oetcf/kdb/index.cfm

External Antenna

Modular approval in the United States is permitted with

the use of the integrated antenna ONLY. If an external

antenna is used with the AMS-00x module, additional

testing of the end product is needed to meet FCC re-

quirements.

RF Exposure

Further Information

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure to

Radio Frequency Electromagnetic Fields, provides assis-

tance in determining whether proposed or existing

transmitting facilities, operations or devices comply

with limits for human exposure to Radio Frequency (RF)

fields adopted by the Federal Communications Com-

mission (FCC). The bulletin offers guidelines and sugges-

tions for evaluating compliance.

Additional information regarding FCC certification and

use of the AMS-00x module in the United States is

available from the following sources.

 Federal Communications Commission (FCC)

http://www.fcc.gov.au

 FCC Office of Engineering and Technology (OET)

Laboratory Division Knowledge Database (KDB)

http://apps.fcc.gov/oetcf/kdb/index.cfm

If appropriate, compliance with exposure guidelines for

mobile and unlicensed devices can be accomplished by

the use of warning labels and by providing users with

information concerning minimum separation distances

from transmitting structures and proper installation of

antennas.

7.2 Canada

The AMS-00x module has been certified for use in Can-

ada under Industry Canada (IC) Radio Standards Specifi-

cation (RSS) RSS-210 and RSSGen. Modular approval

permits the installation of a module in a host device

without the need to recertify the device.

The following statement must be included as a CAU-

TION statement in manuals and OEM products to alert

users of FCC RF exposure compliance:

Labeling and User Information

Requirements

To satisfy FCC RF Exposure requirements for mobile

and base station transmission devices, a separation

distance of 20 cm or more should be maintained

between the antenna of this device and persons

during operation. To ensure compliance, operation

at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not

be co-located or operating in conjunction with any

other antenna or transmitter

Labeling Requirements for the Host Device (from Sec-

tion 3.2.1, RSS-Gen, Issue 3, December 2010): The host

device shall be properly labeled to identify the module

within the host device.

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words “Contains transmit-

ter module”, or the word “Contains”, or similar wording

expressing the same meaning, as follows:

If the AMS-00x module is used in a portable application

(i.e., the antenna is less than 20 cm from persons dur-

ing operation), the integrator is responsible for per-

forming Specific Absorption Rate (SAR) testing in ac-

cordance with FCC rules 2.1091.

Contains transmitter module IC: 11685A-0D06E

User Manual Notice for License-Exempt Radio Appa-

ratus (from Section 7.1.3 RSS-Gen, Issue 3, December

2010): User manuals for license-exempt radio appa-

ADS-MS00x-107R • Preliminary Data Sheet

Page | 15

September 14, 2015

Regulatory Certification, Section 7

AMS-00x • Embedded Bluetooth Low Energy Solution

ratus shall contain the following or equivalent notice in

a conspicuous location in the user manual or alterna-

tively on the device or both:

User manuals for transmitters equipped with detach-

able antennas shall also contain the following notice in

a conspicuous location:

This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not

cause interference, and (2) this device must accept

any interference, including interference that may

cause undesired operation of the device.

This radio transmitter (identify the device by certifi-

cation number, or model number if Category II) has

been approved by Industry Canada to operate with

the antenna types listed below with the maximum

permissible gain and required antenna impedance

for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the

maximum gain indicated for that type, are strictly

prohibited for use with this device.

Le présent appareil est conforme aux CNR d'Indus-

trie Canada applicables aux appareils radio exempts

de licence. L'exploitation est autorisée aux deux

onditions suivantes: (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appa-

reil doit accepter tout brouillage radioélectrique

subi, meme si le brouillage est susceptible d'en

compromettre le fonctionnement.

Le présent émetteur radio (identifier le dispositif

par son numéro de certification ou son numéro de

modèle s'il fait partie du matériel de catégorie I) a

été approuvé par Industrie Canada pour fonctionner

avec les types d'antenne énumérés ci-dessous et

ayant un gain admissible maximal et l'impédance

requise pour chaque type d'antenne. Les types d'an-

tenne non inclus dans cette liste, ou dont le gain est

supérieur au gain maximal indiqué, sont strictement

interdits pour l'exploitation de l'émetteur.

Transmitter Antenna Notification (from Section 7.1.2

RSS-Gen, Issue 3, December 2010): User manuals for

transmitters shall display the following notice in a con-

spicuous location:

Under Industry Canada regulations, this radio

transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type

and its gain should be so chosen that the equivalent

isotropically radiated power (EIRP) is not more than

that necessary for successful communication.

Immediately following the above notice, the manufac-

turer shall provide a list of all antenna types approved

for use with the transmitter, indicating the maximum

permissible antenna gain (in dBi) and required imped-

ance for each.

External Antenna Types

Transmitter Antenna (from Section 7.1.2 RSS-Gen, Issue

3, December 2010):

Conformément à la réglementation d'Industrie Can-

ada, le présent émetteur radio peut fonctionner

avec une antenne d'un type et d'un gain maximal

(ou inférieur) approuvé pour l'émetteur par Indus-

trie Canada. Dans le but de réduire les risques de

brouil-lage radioélectrique à l'intention des autres

utilisa-teurs, il faut choisir le type d'antenne et son

gain de sorte que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne dépasse pas l'intensité

nécessaire à l'établissement d'une communication

satisfaisante.

The AMS-00x module can only be operated with the on-

board antenna with which it was approved without ad-

ditional testing.

If an external antenna is used with the AMS-00x mod-

ule, additional testing of the end product is needed to

meet IC requirements as described in the previous sec-

tion.

Further Information

Additional information may be obtained from the In-

dustry Canada website at http://www.ic.gc.ca

The above notice may be affixed to the device instead

of displayed in the user manual.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 16

September 14, 2015

Regulatory Certification, Section 7

AMS-00x • Embedded Bluetooth Low Energy Solution

evaluation under Article 3.2 of the R&TTE Directive and

does not require further involvement of an R&TTE Di-

rective Notified Body for the final product. [Section

2.2.4]

7.3 Europe

The AMS-00x module is an R&TTE Directive assessed

radio module that is CE marked and has been manufac-

tured and tested with the intention of being integrated

into a final product.

The European Compliance Testing listed in Table 12 was

performed using the AMS-00x on-board antenna.

The AMS-00x module has been tested to R&TTE Di-

rective 1999/5/EC Essential Requirements for Health

and Safety Article 3.1(a), Electromagnetic Compatibility

(EMC) Article 3.1(b), and Radio Article 3.2 and the re-

sults are summarized in Table 12. A Notified Body Opin-

ion has also been issued. All AMS-00x test reports are

available on the ACKme Networks website at

http://ack.me/contact.

Further Information

A document that can be used as a starting point in un-

derstanding the use of Short Range Devices (SRD) in

Europe is the European Radio Communications Com-

mittee (ERC) Recommendation 70-03 E, which can be

downloaded from the European Radio Communications

Office (ERO) at: http://www.ero.dk.

The R&TTE Compliance Association provides guidance

on modular devices in the document titled Technical

Guidance Note 01 available on the website at

Further information may be obtained from the follow-

ing websites:



Radio and Telecommunications Terminal Equip-

ment (R&TTE)

http://ec.europa.eu/enterprise/rtte/index_en.htm

European Conference of Postal and Telecommuni-

cations Administrations (CEPT)

http://www.cept.org

European Telecommunications Standards Institute

(ETSI)

http://www.rtteca.com/html/download_area.htm.

NOTE: To maintain conformance to the testing

listed in Table 12, the module shall be installed in

accordance with the installation instructions in this

data sheet and shall not be modified.

When integrating a radio module into a completed

product the integrator becomes the manufacturer

of the final product and is therefore responsible for

demonstrating compliance of the final product with

the essential requirements of the R&TTE Directive.

http://www.etsi.org

European Radio Communications Office (ERO)

http://www.ero.dk

The Radio and Telecommunications Terminal

Equipment Compliance Association (R&TTE CA)

http://www.rtteca.com/



Labeling and User Information

Requirements

The label on the final product which contains the

AMS-00x module must follow CE marking requirements.

The R&TTE Compliance Association Technical Guidance

Note 01 provides guidance on final product CE marking

External Antenna Requirements

From R&TTE Compliance Association document Tech-

nical Guidance Note 01:

Provided the integrator installing an assessed radio

module with an integral or specific antenna and in-

stalled in conformance with the radio module manufac-

turer’s installation instructions requires no further

ADS-MS00x-107R • Preliminary Data Sheet

Page | 17

September 14, 2015

Regulatory Certification, Section 7

AMS00x • Embedded Bluetooth Low Energy Solution

Table 12. European Compliance Testing

AMS001

Certification

Standard

Article

Laboratory

Report Number

Date

Safety

EN 60950-1:2006 + A11:2009 +

A1:2010 + A12:2011

3.1(a)

Shenzhen Morlab SZ15010120A01

Communications

2015-Feb-09

Technology Co.,

Ltd.

Health

EMC

EN 50371:2002-03

SZ15010120S01A

2015-Feb-09

EN 301 489-1 v1.9.2 (2011-09)

3.1(b)

SZ15010120E01A

EN301 489-17 v2.2.1 (2012-09)

EN 300 328 v1.8.1 (2012-06)

Radio

3.2

-

SZ15010120W04A

2015-Feb-09

2015-Feb-13

Notified Body

Opinion

PHOENIX TESTLAB 15-110950

0700

AMS002

Certification

Standard

Article

Laboratory

Report Number

Date

Safety

EN 60950-

1:2006+A11:2009+A1:2010

3.1(a)

Shenzhen Morlab SZ14100103A01

Communications

2015-Jan-07

Technology Co.,

Ltd.

Health

EMC

EN 50371:2002-03

SZ14100103S01A

2015-Jan-04

2014-Nov-11

EN 301 489-1 v1.9.2 (2011-09)

3.1(b)

SZ14100103E01

EN301 489-17 v2.2.1 (2012-09)

EN 300 328 v1.8.1 (2012-06)

Radio

3.2

-

SZ14100103W04

2015-Jan-06

2015-Jan-12

Notified Body

Opinion

PHOENIX TESTLAB 15-110130

0700

external antenna is used with the AMS-00x module,

additional testing of the end product is needed to meet

Australian regulatory requirements.

7.4 Australia

Australian radio regulations do not provide a modular

approval policy similar to the United States (FCC) and

Canada (IC). However, AMS-00x module test reports

may be used in part to demonstrate compliance in ac-

cordance with ACMA Radio communications “Short

Range Devices” Standard 2004 which references Aus-

tralia/New Zealand industry standard AS/NZS-

4268:2012. AMS-00x RF transmitter test reports may be

used as part of the product certification and compliance

folder. For further information regarding the availability

of RF test reports, please contact ACKme Networks via

our website at http://ack.me/contact.

Further Information

Additional information may be obtained from the Aus-

tralian Communications and Media Authority website

at http://www.acma.gov.au.

External Antenna Requirements

The compliance test reports provided in Table 12 were

performed using the AMS-00x on-board antenna. If an

ADS-MS00x-107R • Preliminary Data Sheet

Page | 18

September 14, 2015

Regulatory Certification, Section 7

AMS00x • Embedded Bluetooth Low Energy Solution

7.5 New Zealand

New Zealand radio regulations do not provide a modu-

lar approval policy similar to the United States (FCC)

and Canada (IC). However, AMS-00x module test re-

ports may be used in part to demonstrate compliance

with the New Zealand “General User Radio License for

Short Range Devices”. New Zealand Radio communica-

tions (Radio Standards) Notice 2010 references Austral-

ia/New Zealand industry standard AS/NZS-4268:2012.

AMS-00x RF transmitter test reports may be used as

part of the product certification and compliance folder.

For further information regarding the availability of RF

test reports, please contact ACKme Networks via our

website at http://ack.me/contact.

External Antenna Requirements

The compliance test reports provided in Table 12 were

performed using the AMS-00x on-board antenna. If an

external antenna is used with the AMS-00x module,

additional testing of the end product is needed to meet

New Zealand regulatory requirements.

Further Information

Additional information may be obtained from the New

Zealand Radio Spectrum Ministry of Economic Devel-

opment website at http://www.rsm.govt.nz.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 19

September 14, 2015

Packaging, Handling & Storage, RoHS, Section 8

AMS00x • Embedded Bluetooth Low Energy Solution

8 Packaging, Handling & Storage, RoHS

8.1 Packaging

AMS00x modules are shipped in an ESD bag.

AMS00x modules are also available in reels each containing 1000 modules. Reels are shipped in an ESD and moisture

resistant sealed bag. The shelf life of the sealed bag is 12 months at 40°C and <90% Relative Humidity (RH). Please

refer to the bag seal date.

8.2 Tape and Reel Specifications

Figure 7 - Tape Specifications

Symbol

A0

B0

D0

E

F

K0

Specification (mm)

11.8 ± 0.10

18.1 ± 0.10

1.5 ± 0.10

1.75 ± 0.10

14.2 ± 0.10

2.70 ± 0.10

Symbol

P

P0

P2

2.00 ± 0.10

T

W

Specification (mm)

20.0 ± 0.10

4.00 ± 0.10

0.30 ± 0.05

32.0 ± 0.30



Tape material : black PS material, in line with ROHS environmental management substances

Tape thickness: 0.3 mm ± 0.05 mm

Tape width: 32mm (1.3")

Protection zone: black PS material

Distance between chain hole centers within the range of ± 0.2 mm of cumulative error

Anti-camber at 1 mm / 250 mm

All dimensions in line with the requirements of EIA-481-D

ADS-MS00x-107R • Preliminary Data Sheet

Page | 20

September 14, 2015

Packaging, Handling & Storage, RoHS, Section 8

AMS00x • Embedded Bluetooth Low Energy Solution

Figure 8 - Reel Specifications

Symbol

A

B

C1

D

E

H

T

Specification (mm) 2.5 ± 0.2

11 ± 0.2

330 ± 1

99.5 ± 0.1 13.2 ± 0.2 32.8 + 0.3 / -0.2 2.25 ± 0.2

ADS-MS00x-107R • Preliminary Data Sheet

Page | 21

September 14, 2015

Packaging, Handling & Storage, RoHS, Section 8

AMS00x • Embedded Bluetooth Low Energy Solution

8.3 Handling & Storage

CAUTION

MSL3 Sensitive Device!

AMS00x modules are moisture sensitive devices rated

at Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC

J-STD-20.

After opening the moisture sealed storage bag, mod-

ules that will be subjected to reflow solder or other

high temperature processes must be:

1. mounted to a circuit board within 168 hours at

factory conditions (≤30°C and <60% RH)

OR

2. continuously stored per IPC/JEDEC J-STD-033

Modules that have been exposed to moisture and envi-

ronmental conditions exceeding packaging and storage

conditions MUST be baked before mounting according

to IPC/JEDEC J-STD-033.

Failure to meet packaging and storage conditions will

result in irreparable damage to modules during solder

reflow.

8.4 RoHS Directive

Each AMS00x module is produced

according to the RoHS (Restriction

of the use of certain Hazardous

Substances in electrical and electronic equipment) di-

rective and complies with the directive.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 22

September 14, 2015

Ordering Information, Section 9

AMS00x • Embedded Bluetooth Low Energy Solution

9 Ordering Information

AMS00x modules are available individually or in a reel of 1000 units as described in the tables below.

Table 13. AMS001 Ordering Information

Part Number

Description

AMS001/S

1 x AMS001 module with TruConnect pre-installed. Each module is individually packaged in an

ESD bag.

AMS001/R

A single reel containing 1000 x AMS001 modules, each with TruConnect pre-installed.

The entire reel is packaged in an ESD and MSL3-rated moisture sensitive bag.

Table 14. AMS002 Ordering Information

Part Number

Description

AMS002/S

1 x AMS002 module with TruConnect pre-installed. Each module is individually packaged in an

ESD bag.

AMS002/R

A single reel containing 1000 x AMS002 modules, each with TruConnect pre-installed.

The entire reel is packaged in an ESD and MSL3-rated moisture sensitive bag.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 23

September 14, 2015

Revision History & Glossary, Section 10

AMS00x • Embedded Bluetooth Low Energy Solution

10 Revision History & Glossary

10.1 Revision History

Table 15: Document Revision History

Revision

Date

Change Description

ADS-MS00x-100R

ADS-MS00x-101R

10-Nov-2014 Initial version

7-Jan-2015 Note minimum boot voltage

Add packaging section

ADS-MS00x-102R

ADS-MS00x-103R

ADS-MS00x-104R

2-Feb-2015 Note pull-up requirement and minimum deep sleep current

2-Feb-2015 Finalized AMS002 CE regulatory information for AMS002

8-Apr-2015 Added limits for IO pins

Finalized AMS001 regulatory information

ADS-MW00x-105R

ADS-MW00x-106R

9-Jun-2015 Updated GPIO and pin definitions in Pin and Signal Descriptions

28-Aug-2015 Added maximum voltage details for Input and Output Pins

Added vias diagram to Routing Recommendations

Added tape and reel documentation. Removed tray packaging details.

ADS-MW00x-107R

14-Sep-2015 Added Adaptive Frequency Hopping to features and description.

10.2 Glossary

In most cases, acronyms and abbreviations are defined on first use. A comprehensive list of acronyms and other

terms used in ACKme Networks documents are provided on the ACKme Networks website at

http://ack.me/FAQs/Glossary.

ADS-MS00x-107R • Preliminary Data Sheet

Page | 24

September 14, 2015

AMS00x • Embedded Bluetooth Low Energy Solution

ACKme reserves the right to make changes without further notice to any products or data herein to improve reliability, function, or design.

Information furnished by ACKme is believed to be accurate and reliable. However, ACKme does not assume any liability arising out of the

application or use of this information, nor the application or use of any product described herein, neither does it convey any license under

its patent rights nor the rights of others.

ACKme Networks

Contact Information

+1 (408) 402 8160

http://ack.me/contact

20 North Santa Cruz Ave

Los Gatos CA 95030

United States

ADS-MS00x-107R • Preliminary Data Sheet

September 14, 2015


型号：	AMS001-S
厂家：	SILICON
描述：	Embedded Bluetooth Low Energy Solutions
文件：	总29页 (文件大小：1377K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

AMS001-S [SILICON]

相关型号：

AMS002-E03

AMS002-R

AMS002-S

AMS04

AMS04AN

AMS04AS

AMS04BN

AMS04BS

AMS05

AMS05AN

AMS05AS

AMS05BN