SI4830-A20-GU [SILICON]
Consumer IC;型号: | SI4830-A20-GU |
厂家: | SILICON |
描述: | Consumer IC |
文件: | 总3页 (文件大小:1017K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Si4830
Broadcast Mechanical Tuning AM/FM Radio Receiver
Description
Features
The Si4830 is the first wheel-tuned digital CMOS AM/FM
radio receiver IC that integrates the complete receiver
function from antenna input to audio output. Leveraging
Silicon Laboratories' proven and patented digital low
intermediate frequency (low-IF) receiver architecture, the
Si4830 delivers superior RF performance and interference
rejection in both AM and FM bands. Additionally, the digital
core provides advanced audio conditioning for all
environments, removing pops, clicks, and loud static in
variable signal conditions. The superior control algorithm
integrated in Si4830 provides easy and reliable control
interface while eliminating all the manual tuned external
components used in traditional solutions.
Like other successful audio products from Silicon Labs,
Si4830 offers unmatched integration and PCB space
savings with minimum external components and less than
20 mm2 of board area, excluding the antenna inputs. The
high integration and complete system production test
simplifies design-in, increases system quality, and
improves manufacturability. The receiver has very low
power consumption, runs off two AAA batteries, and
delivers the performance benefits of digital tuning to the
legacy analog radio market.
- Worldwide FM band support (64–108 MHz)
- Worldwide AM band support (520–1710 kHz)
- Selectable support for all AM/FM regional bands
- Wheel-tuned / Mechanical-tuned frequency support
- Mechanical volume control + off/on
- Excellent real-world performance
- Digital radio with leading low-IF architecture
- Automatic frequency control (AFC)
- Stereo/mono + tuning and stereo indicator
- EN55020 compliant
- Minimal BOM components w/ no manual alignment
- No external MCU required
- Two AAA batteries with 2.0 to 3.6 V supply voltage
(T = 25° C)
- Wide range of ferrite loop sticks and air loop antennas
- 24-pin SSOP package
- RoHS compliant
Applications
- Table and portable radios
- Stereos
- Mini/micro systems
- Boomboxes
- Clock radios
- Modules
- Entertainment systems
- Toys, lamps, and any application needing an AM/FM
radio
Si4830
ADC
ADC
DAC
AMI
LOUT
ROUT
AM
ANT
LNA
DSP
RFGND
DAC
FM
ANT
AGC
FMI
0/90
TUNE1/2
XTALO
CONTROL
INTERFACE
AFC
REG
XTALI
2.0~3.6V
STEREO
STATION
VDD
XTAL
OSC
AM/FM Receiver
Copyright © 2010 by Silicon Laboratories
2.24.2010
Si4830
Broadcast Mechanical Tuning AM/FM Radio Receiver
Selected FM Electrical Specifications
Parameter
Input Frequency
Symbol
fRF
Conditions
Min
64
—
—
—
—
—
—
—
Typ
—
Max
108
—
Units
MHz
Sensitivity
(S+N)/N = 26 dB
2.2
105
50
µV EMF
dBµV EMF
dB
Input IP3
—
Adjacent Channel Selectivity
Alternate Channel Selectivity
Audio Output Voltage
Audio S/N
±200 kHz
±400 kHz
—
65
—
dB
80
—
mVRMS
dB
53
—
Audio THD
0.1
0.5
%
Selected AM Electrical Specifications
Parameter
Input Frequency
Symbol
Conditions
Min
520
—
Typ
—
Max
1710
—
Units
kHz
fRF
Sensitivity
(S+N)/N = 26 dB
25
56
60
0.1
—
µV EMF
dB
Audio S/N
—
—
Audio Output Voltage
Audio THD
—
—
mVRMS
%
—
—
Antenna Inductance
180
450
μH
Package Information
Pin Assignments
Stereo
LOUT
ROUT
1
2
24
BAND
XTALO
TUNE2
TUNE1
NC
23
22
21
20
19
18
17
16
15
14
13
3
DBYP
VDD2
VDD1
XTALI
Station
RSV2
RSV1
RST
4
5
6
NC
7
Table 1. Package Dimensions
FMI
8
Dimension Min
Nom
—
Max
1.75
0.25
0.30
0.25
Dimension
Min
Nom
—
Max
RFGND
NC
9
A
—
L
0.40
1.27
A1
0.10
0.20
0.10
—
L2
0.25 BSC
—
10
11
12
b
—
θ
0°
8°
c
—
aaa
bbb
ccc
ddd
0.20
NC
GND
D
8.65 BSC
6.00 BSC
3.90 BSC
0.635 BSC
0.18
E
E1
0.10
AMI
GND
0.10
e
Notes:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing per ANSI Y14.5M-1994.
3. This drawing conforms to the JEDEC Solid State Outline MO-137, Variation
AE.
4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020
specification for Small Body Components.
AM/FM Receiver
Copyright © 2010 by Silicon Laboratories
2.24.2010
Silicon Laboratories and Silicon Labs are trademarks of Silicon Laboratories Inc.
Other products or brandnames mentioned herein are trademarks or registered trademarks of their respective holders
Smart.
Connected.
Energy-Friendly
Products
www.silabs.com/products
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Laboratories intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers
using or intending to use the Silicon Laboratories products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific
device, and "Typical" parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Laboratories
reserves the right to make changes without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy
or completeness of the included information. Silicon Laboratories shall have no liability for the consequences of use of the information supplied herein. This document does not imply
or express copyright licenses granted hereunder to design or fabricate any integrated circuits. The products must not be used within any Life Support System without the specific
written consent of Silicon Laboratories. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected
to result in significant personal injury or death. Silicon Laboratories products are generally not intended for military applications. Silicon Laboratories products shall under no
circumstances be used in weapons of mass destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc., Silicon Laboratories, Silicon Labs, SiLabs and the Silicon Labs logo, CMEMS®, EFM, EFM32, EFR, Energy Micro, Energy Micro logo and combinations
thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZMac®, EZRadio®, EZRadioPRO®, DSPLL®, ISOmodem ®, Precision32®, ProSLIC®, SiPHY®,
USBXpress® and others are trademarks or registered trademarks of Silicon Laboratories Inc. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of
ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or brand names mentioned herein are trademarks of their respective holders.
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
http://www.silabs.com
相关型号:
SI4830ADY-T1-GE3
Small Signal Field-Effect Transistor, 5.7A I(D), 30V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, MS-012AA, HALOGEN FREE AND ROHS COMPLIANT, MS-012, SOIC-8
VISHAY
SI4830DY-T1-E3
Small Signal Field-Effect Transistor, 5.7A I(D), 30V, 2-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, SO-8
VISHAY
©2020 ICPDF网 联系我们和版权申明