SI7201-B-05-IV [SILICON]
Hall Effect Sensor,;型号: | SI7201-B-05-IV |
厂家: | SILICON |
描述: | Hall Effect Sensor, |
文件: | 总29页 (文件大小:618K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Si720x Switch/Latch Hall Effect Magnetic
Position Sensor Data Sheet
The Si7201/2/3/4/5/6 family of Hall effect magnetic sensors and latches from Silicon
Labs combines a chopper-stabilized Hall element with a low-noise analog amplifier, 13-
FEATURES
bit analog-to-digital converter, and a flexible comparator circuit. Leveraging Silicon Labs'
proven CMOS design techniques, the Si720x family incorporates digital signal process-
ing to provide precise compensation for temperature and offset drift.
• High-Sensitivity Hall Effect Sensor
• Maximum B operating point/minimum
OP
field strength of <1.1 mT
Compared with existing Hall effect sensors, the Si720x family offers industry-leading
sensitivity, which enables use with larger air gaps and smaller magnets. For battery-
powered applications, the Si720x family offers very low power consumption to improve
operating life. For automotive applications, the Si720x family in SOT23 packages is
AEC-Q100 qualified.
• Omnipolar or unipolar operation
• Integrated digital signal processing for
temperature and offset drift
compensation
• Low 400 nA Typical Current Consumption
at 5 samples per second
The Si720x devices are offered in 3-pin SOT23 and TO-92 packages, with power,
ground, and a single output pin that goes high or low as the magnetic field increases.
With the three-pin package, tamper indication is by the pin going back to its zero field
level at high magnetic field.
• Selectable / Programmable Sensitivity,
Hysteresis, Output Polarity and Sample
Rate
• Sensitivity Drift < ±3% over Temperature
In the 5-pin SOT23 and 8-pin DFN(coming soon) packages, pins are available for both
sleep mode activation and separate tamper indication.
• Wide Power Supply Voltage
• 1.71 to 5.5 V
• 3.3 to 26.5 V
Applications:
• AEC-Q100 Qualified for Automotive
Applications
• Camera image stabilization, zoom,
• Replacement of reed switches in con-
sumer, automotive, and security applica-
and autofocus
• Selectable Output Options
• Open-drain output
• Fluid level sensing
tions
• Control knobs and selector switches
• Automotive position sensing of HVAC
valve, head rest, seat track, side mir-
rors, sunroof, door locks, and other me-
chanical devices
• Digital high/low output
• General-purpose mechanical position
sensing
• Industry-Standard Packaging
• Surface mount SOT-23 (3 or 5 pin)
• Through hole TO-92 (3-pin)
• BLDC motor control
• 1.4 x 1.6 mm 8-pin DFN package
(coming soon)
Hall
Element
Si7201/2/3/4/5/6
ADC
DIS (Optional)
Control Logic
OUT1
Temp / Offset /
Mechanical Stress
Compensation
OUT2 / TAMPERb
(Optional)
VDD
Reg
GND
silabs.com | Building a more connected world.
Rev. 1.0
Table of Contents
1. Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Functional Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. DISABLE Pin Timing
4. Pin Description
5. Ordering Guide
. . . . . . . . . . . . . . . . . . . . . . . . . . .10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
6. Package Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6.1 SOT23 3-Pin Package . . . . . . . . . . . . . . . . . . . . . . . . . . .19
6.2 SOT23-5 5-Pin Package. . . . . . . . . . . . . . . . . . . . . . . . . . .21
6.3 TO92S 3-Pin Package . . . . . . . . . . . . . . . . . . . . . . . . . . .23
7. Land Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7.1 SOT23 3-Pin PCB Land Pattern . . . . . . . . . . . . . . . . . . . . . . . .24
7.2 SOT23-5 5-Pin PCB Land Pattern . . . . . . . . . . . . . . . . . . . . . . .25
8. Top Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8.1 SOT23 3-Pin Top Marking . . . . . . . . . . . . . . . . . . . . . . . . . .26
8.2 SOT23-5 5-Pin Top Marking . . . . . . . . . . . . . . . . . . . . . . . . .27
8.3 TO92 Top Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
9. Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
silabs.com | Building a more connected world.
Rev. 1.0 | 2
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Electrical Specifications
1. Electrical Specifications
Unless otherwise specified, all min/max specifications apply over the recommended operating conditions.
Table 1.1. Recommended Operating Conditions
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
5.51
26.5
Power Supply
VDD
VDD
TA
Si7201/2/3/4
Si7205/6
I grade
1.71
V
Power Supply
Temperature
Note:
3.3
-40
V
+1252
°C
1. 3.6 V for most sensitive parts (see 5. Ordering Guide).
2. 0-70°C for most sensitive parts (F grade) (see 5. Ordering Guide).
Table 1.2. General Specifications1
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
V
Input Voltage High
Input Voltage Low
Input voltage Range
Input Leakage
VIH
VIL
VIN
IIL
DIS pin
0.7 x VDD
-
-
-
0.3 x VDD
VDD
DIS pin
-
V
DIS pin
0
V
DIS pin
1
µA
V
Output Voltage Low
VOL
TAMPERb pin IOL = 3 mA
VDD > 2 V
0.4
TAMPERb pin IOL = 2 mA
VDD > 1.71 V
TAMPERb pin IOL = 6 mA
VDD > 2 V
0.2
0.6
V
V
V
Output Voltage High
VOH
TAMPERb pin
IOH = 2 mA
VDD – 0.4
VDD > 2.25 V
silabs.com | Building a more connected world.
Rev. 1.0 | 3
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Electrical Specifications
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
Current Consumption
IDD
Sleep timer enabled average at
0.4
μA
VDD = 3.3 V and 200 msec sleep
time
Average power depends on the
sample rate and percent of time
spent sampling versus sleep mode
or idle mode. See the ordering
guide for average power calcula-
tions for specific devices.
Sleep mode
VDD = 3.3 V, T = 25 °C
VDD = 3.3 V, T = 70 °C
VDD = 5.5 V, T = 125 °C
50
nA
1000
5000
nA
nA
Conversion in progress
VDD = 1.8V
mA
3.5
5
5.5
6
VDD = 3.3 V
6.8
8.0
VDD = 5.5 V
Conversion in progress high volt-
age parts
6.5
8.5
mA
VDD = 3.3 to 26.5 V
Idle mode low voltage parts
VDD = 1.71 to 5.5 V
0.6
0.9
11
1
mA
mA
Idle mode high voltage parts
VDD = 3.3 to 26.5 V
1.2
Conversion Time
Sample Rate
TCONV
First conversion when waking from
sleep or idle
µs
µs
Additional conversions in a burst
8.8
-
FSAMPLE Parts can be configured for sleep
or idle between samples. Sleep is
lower power, but the fastest sam-
pling rate is 8 kHz. Idle allows sam-
pling rate to be configured to be as
high as 113 kHz. See the ordering
guide for details.
Wake Up Time
TWAKE
Time from VDD > 1.71 V to first
measurement
1
msec
Note:
1. TAMPERb and DIS pin specifications apply when the pin is present (Si7203/4).
2. Idle time can be factory programmed from 13.2 μsec to 206 msec ±10% or set to zero in which case conversions are done every
8.8 μsec. Normally idle time is only used at higher sample speeds.
3. For high voltage parts (VDD = 26.5 V maximum), the power on ramp should be faster than 10 V per second in the start-up region
from 2 to 3 V.
silabs.com | Building a more connected world.
Rev. 1.0 | 4
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Electrical Specifications
Table 1.3. Output Pin Specifications
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
Si7201/2/3/4
Output Voltage Low
Open Drain or Push Pull
VOL
IOL = 3 mA
VDD > 2 V
IOL = 2 mA
VDD > 1.71V
IOL = 6 mA
VDD > 2 V
0.4
V
0.2
0.6
1
V
V
Leakage
IOH
µA
Output High
Output Pin Open Drain
Output Voltage High
Output Pin Push Pull
VOH
IOH = 2 mA
VDD – 0.4
V
VDD > 2.25 V
Slew Rate
TSLEW
5
%VDD/ns
Si7205/6
Output Voltage Low
VOL
IOL = 11.4 mA
VDD > 6 V
0.4
V
Safe Continuous Sink Current
Leakage
20
1
mA
µA
IOH
Output High
Output Pin Open Drain
Slew Rate
TSLEW
5
4
%VDD/ns
mA
Digital Output Mode
Output Pin Shorted to VDD
ISHORT
VDD = 12 V
Average current as pin cycles
silabs.com | Building a more connected world.
Rev. 1.0 | 5
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Electrical Specifications
The Si7205 and Si7206 can be configured to signal the status equivalent to output high or low by modulating the power supply current.
If configured in this way, the following are the specifications for the amount of current that will be drawn for the “output high” state.
Table 1.4. IDD Signaling
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
IDD Signaling Current
IDO
VDDH > 6 V
8
10
12
mA
Table 1.5. Magnetic Sensor1
Parameter
Symbol Test Condition
Min
Typ
Max
Unit
Offset
BOFF
20 mT scale
±150
±250
µT
VDD = 1.71 to 3.6 V
0-70°C
20 mT scale
VDD = 1.71 to 5.5 V
±250
+450,
-350
µT
Full temperature range
0-70°C
Gain Accuracy
5
%
%
Full temperature range
10
RMS Noise2
Room temp, 20 mT range, VDD = 5
V
30
µT rms
Note:
1. See the Magnetic Sensors Selector Guide for operating release points. These are defined as maximum operating point and mini-
mum release point over the operating temperature range and do not include the effect of noise.
2. For a single conversion. This can be reduced by the square root of N by filtering over N samples. See ordering guide for samples
taken per measurement.
Table 1.6. Temperature Compensation
Parameter
Symbol Test Condition
Flat Tempco.
Min
Typ
Max
Unit
Bop and Brp vs Temperature
< ±0.05
%/°C
0-70°C
Neodymium compensation
Ceramic compensation
-0.12
-0.2
%/°C
%/°C
silabs.com | Building a more connected world.
Rev. 1.0 | 6
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Electrical Specifications
Table 1.7. Thermal Characteristics
Parameter
Symbol
θJA
Test Condition
Value
212.8
45
Unit
°C/W
°C/W
°C/W
°C/W
Junction to Air Thermal Resistance
Junction to Board Thermal Resistance
Junction to Air Thermal Resistance
Junction to Board Thermal Resistance
JEDEC 4 layer board no airflow SOT23-5
JEDEC 4 layer board no airflow SOT23-5
JEDEC 4 layer board no airflow SOT23-3
JEDEC 4 layer board no airflow SOT23-3
θJB
θJA
254.6
54.8
θJB
Table 1.8. Absolute Maximum Ratings1
Parameter
Symbol Test Condition
Min
-55
-65
Typ
Max
Unit
°C
Ambient Temperature Under Bias
Storage Temperature
Si7201/2/3/4
125
150
°C
Voltage on I/O Pins
-0.3
-0.3
VDD+0.3
6
V
V
Voltage on VDD with Respect to
Ground
ESD Tolerance
HBM
CDM
2
kV
V
500
Si7205/6
Voltage on Ouput pin2
-21
-21
40
40
V
V
Voltage on VDD with Respect to
Ground3
ESD Tolerance
HBM
CDM
8
kV
V
500
Notes:
1. Absolute maximum ratings are stress ratings only, operation at or beyond these conditions is not implied and may shorten the life
of the device or alter its performance.
2. The output pin can withstand EMC transients per ISO 7637-2-2-11 and Ford EMC-CS-2009.1 with a current limiting resistor of
220 Ω to a local bypass cap of 0.1 μF and additional 22 Ω between the capacitor and ground..
3. VDD can withstand automotive EMC transients per ISO 7637-2-2-11 and Ford EMC-CS-2009.1 with a current limiting resistor of
220 Ω.
silabs.com | Building a more connected world.
Rev. 1.0 | 7
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Functional Description
2. Functional Description
The Si7201/2/3/4/5/6 family of Hall Effect magnetic sensors digitize the component of the magnetic field in the z axis of the device (pos-
itive field is defined as pointing into the device from the bottom). The digitized field is compared to a pre-programmed threshold and the
output pin goes high or low if the threshold is crossed. The parts are normally used to detect the presence or absence of a magnet in
security systems, as position sensors or for counting revolutions.
Table 2.1. Part Ordering Guide
Part Number
Si7201
Description
Low voltage switches
Si7202
Low voltage latches
Si7203
Low voltage switch with tamper and/or disable pins
Low voltage latches with tamper and/or disable pins
High voltage switches
Si7204
Si7205
Si7206
High voltage latches
The output pin (push pull or open collector) can go high or low when the magnetic field crosses a threshold. The output pin configura-
tion is determined by the type of part ordered.
The parts are preconfigured for the magnetic field measurement range, magnetic field operate and release points, sleep time, tempera-
ture compensation, tamper threshold and digital filtering and will wake into this mode when first powered. The specific configuration
output type (open collector or push pull) are determined by the part number. See Magnetic Sensors Selector Guide for details.
Examples:
VOUT
VOH
VOL
BTAMPER
Brp Bop
Figure 2.1. Unipolar Switch with Tamper
silabs.com | Building a more connected world.
Rev. 1.0 | 8
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Functional Description
VOUT
VOH
VOL
B
BTAMPER
Bop Brp
Brp Bop
BTAMPER
Figure 2.2. Omnipolar Swith with Tamper
VOUT
VOH
VOL
B
Brp
Bop
Figure 2.3. Latch
silabs.com | Building a more connected world.
Rev. 1.0 | 9
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
DISABLE Pin Timing
3. DISABLE Pin Timing
For a part that has a DISABLE pin, DISABLE high will put the part in complete sleep mode with IDD typical of 50 nA. When DISABLE
goes low, the part will wake and initiate a measurement. For a single measurement, this takes 11 μsec typically. Additional measure-
ments in a burst take 8.8 μsec. Once the measurement (burst) is complete, the output pin status is updated and the part enters idle
mode. The part will make a new measurement or measurement burst at the time-interval determined by the idle timer (typically 1 msec).
The idle timer is reset when DISABLE transitions from high to low, so the time from the first measurement until the next measurement
will always be the programmed idle time.
Disable low pulses can be as short as 1 μsec. For pulses shorter than a conversion burst, the part will make one burst and then go back
to sleep.
When disable returns high, a measurement in progress (if any) will complete and the part will enter sleep mode.
As the idle time is typically long (i.e. 1 msec) compared to the measurement time (i.e. 11 μsec), it is possible to keep the DISABLE pin
low duration short (i.e. 15 μsec) and have a long period in the sleep state. This is an effective way to control the sample rate and power.
For example, if the part is programmed to make a single measurement at a time and is programmed with an idle time of 1 msec and
DISABLE is pulsed low for 15 μsec every 50 msec, then the average IDD will be:
• 11 μsec to wake and make a measurement at IDD typical of 5.0 mA (3.3V)/(50.015 msec cycle time) = 1.0 μA
• 4 μsec in idle mode at typical current of 600 μA/(50.015 msec cycle time) = 0.05 μA
• 50 msec in sleep mode at 50 nA/(50.015 msec cycle time) = 0.05uA
• Or 1.1 μA total
As the programmed idle time is shorter than the DISABLE low time in the example, the value of the programmed idle time does not
make a difference.
silabs.com | Building a more connected world.
Rev. 1.0 | 10
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Pin Description
4. Pin Description
1
1
5
3
2
2
3
4
1
2
3
SOT-23, 3-Pin
Top View
SOT-23, 5-Pin
Top View
TO-92, 3-Pin
Front View
Figure 4.1. Si720xxx Pin Assignments
Note:
The 3-pin option includes part numbers: Si7201/2/5/6.
The SOT-23 5 pin option include part numbers: Si7203/4.
Table 4.1. Si7201/2/5/6 (SOT23 3-pin Package)
Pin Name
VDD
Pin Number
Description
1
2
3
Power 1.71 to 5.5 V or 3.3 to 26.5 V
Switch/latch output
Ground
OUT1
GND
Table 4.2. Si7203/4/5 (SOT23 5-pin Package)
Pin Name
OUT2/TAMPERb
GND
Pin Number
Description
1
2
3
OUT2/TAMPERb (tamper/high field indicator)
Ground
DIS
Disables part (puts into sleep mode) when high. Measurement cycle will resume when pin goes
low
VDD
4
5
Power 1.71 to 5.5 V
Switch/latch output
OUT1
silabs.com | Building a more connected world.
Rev. 1.0 | 11
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Pin Description
Table 4.3. Si7201/2/5/6 (TO-92 Package)
Pin Name
VDD
Pin Number
Description
1
2
3
Power
Ground
Output
GND
OUT1
silabs.com | Building a more connected world.
Rev. 1.0 | 12
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
5. Ordering Guide
Si72 0 1 B xx F V R
Silicon Labs Magnetic Sensor Family
Output Type
Feature Set Major
1, 3, 5 = Switch
2, 4, 6 = Latch
Revision
Feature Set Minor
See Selector Guide for breakdown of feature set
Temperature Grade
F = (0 to +70)
I = (-40 to +125)
Package
V = SOT23, B = TO92, M = DFN8
Tape and Reel (Optional)
Figure 5.1. Si720x Part Numbering
Table 5.1. Product Selection Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
3-pin Switches. Temperature rating 0 °C to 70 °C.
Si7201- Bop = Omnipolar Low (push- None
None
None
20 mT 0.4 uA
200 ms 1.71 -
3.6 V
B-00-
FV(R)
±1.1 mT
(max)
Switch pull)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.4 mT
(typ)
silabs.com | Building a more connected world.
Rev. 1.0 | 13
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
Si7201- Bop =
Omnipolar Low (push- ±19.8 mT
None
None
20 mT 0.4 uA
200 ms 1.71 -
3.6 V
B-01-
FV(R)
±1.1 mT
(max)
Switch
pull)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.4 mT
(typ)
Si7201- Bop =
Omnipolar
Switch
High
(push-pull)
±19.8 mT
0.12%/°C
4 sample
FIR
20 mT 1.1 uA
200 ms 1.71 -
3.6 V
B-02-
FV(R)
±0.9 mT
(max)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.2 mT
(typ)
3-pin Switches. Temperature rating -40 °C to 125 °C.
Si7201- Bop =
Omnipolar
Switch
High
(push-pull)
None
None
None
None
None
None
None
20 mT 57 uA
20 mT 0.4 uA
20 mT 0.4 uA
1 ms
1.71 -
5.5 V
B-03-
IV(R)
±0.9 mT
(max)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.2 mT
(typ)
Si7201- Bop =
Omnipolar Low (push- None
Switch pull)
200 ms 1.71 -
5.5 V
B-04-
IV(R)
±1.4 mT
(max)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.4 mT
(typ)
Si7201- Bop =
Omnipolar Low (push- ±19.8 mT
Switch pull)
200 ms 1.71 -
5.5 V
B-05-
IV(R)
±2.0 mT
(max)
Brp = ±0.6
mT (min)
|Bop - Brp|
= 0.6 mT
(typ)
silabs.com | Building a more connected world.
Rev. 1.0 | 14
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
Si7201- Bop =
Omnipolar
Switch
Low (open None
drain)
None
None
None
None
None
None
20 mT 0.4 uA
20 mT 0.4 uA
20 mT 57 uA
20 mT 0.4 uA
20 mT 57 uA
200 ms 1.71 -
5.5 V
B-06-
IV(R)
±2.0 mT
(max)
Brp = ±0.6
mT (min)
|Bop - Brp|
= 0.6 mT
(typ)
Si7201- Bop =
Omnipolar
Switch
Low (open ±19.8 mT
drain)
None
None
None
None
200 ms 1.71 -
5.5 V
B-07-
IV(R)
±2.0 mT
(max)
Brp = ±0.6
mT (min)
|Bop - Brp|
= 0.6 mT
(typ)
Si7201- Bop =
Omnipolar
Switch
Low (open None
drain)
1 ms
1.71 -
5.5 V
B-08-
IV(R)
±3.4 mT
(max)
Brp = ±1.6
mT (min)
|Bop - Brp|
= 0.6 mT
(typ)
Si7201- Bop =
B-09-IB ±1.4 mT
(max)
Omnipolar Low (push- None
Switch
200 ms 1.71 -
5.5 V
pull)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.4 mT
(typ)
Si7201- Bop =
B-11-IB ±0.9 mT
(max)
Omnipolar
Switch
High
None
1 ms
1.71 -
5.5 V
(push-pull)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.2 mT
(typ)
3-pin Latches. Temperature rating 0 °C to 70 °C.
silabs.com | Building a more connected world.
Rev. 1.0 | 15
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
Si7202- Bop =
Latch
High
(push-pull)
None
None
None
20 mT 0.4 uA
200 ms 1.71 -
3.6 V
B-00-
FV(R)
+0.65 mT
(max)
Bop =
+0.15 mT
(min)
Brp =
-0.65 mT
(min)
Brp =
-0.15 mT
(max)
|Bop - Brp|
= 0.8 mT
(typ)
3-pin Latches. Temperature rating -40 °C to 125 °C.
Si7202- Bop =
Latch
Low (push- None
pull)
None
None
20 mT 0.4 uA
200 ms 1.71 -
5.5 V
B-01-
IV(R)
+1.4 mT
(max)
Bop =
+0.6 mT
(min)
Brp = -1.4
mT (min)
Brp = -0.6
mT (max)
|Bop - Brp|
= 2.0 mT
(typ)
Si7202- Bop =
Latch
High
(push-pull)
None
None
None
20 mT
1 ms
1.71 -
5.5 V
B-02-
IV(R)
+5.9 mT
(max)
Bop =
+4.3 mT
(min)
Brp = -5.9
mT (min)
Brp = -4.6
mT (max)
|Bop - Brp|
= 10.24
mT (typ)
silabs.com | Building a more connected world.
Rev. 1.0 | 16
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
Si7202- Bop =
B-04-IB +1.4 mT
(max)
Latch
Low (push- None
pull)
None
None
20 mT 0.4 uA
200 ms 1.71 -
5.5 V
Bop =
+0.6 mT
(min)
Brp = -1.4
mT (min)
Brp = -0.6
mT (max)
|Bop - Brp|
= 2.0 mT
(typ)
5-pin Switches. Temperature rating 0 °C to 70 °C.
Si7203- Bop = Omnipolar High (open ±19.8 mT
None
None
20 mT 0.4 mA 1 ms
1.71 -
3.6 V
B-00-
FV(R)
±1.1 mT
(max)
Switch drain)
Brp = ±0.2
mT (min)
|Bop - Brp|
= 0.4 mT
(typ)
5-pin Latches. Temperature rating 0 °C to 70 °C.
Si7204- Bop =
Latch
High
(push-pull)
None
None
None
20 mT 0.4 mA 1 ms
1.71 -
3.6 V
B-00-
FV(R)
+1.1 mT
(max)
Bop =
+0.6 mT
(min)
Brp = -1.1
mT (min)
Brp = -0.6
mT (max)
|Bop - Brp|
= 1.8 mT
(typ)
High Voltage Switches. Temperature rating -40 °C to 125 °C.
Si7205- Bop =
Omnipolar
Switch
Low (open None
drain)
None
None
20 mT 950 uA 1 ms
3.3 -
26.5 V
B-00-
IV(R)
±3.0 mT
(max)
Brp = ±0.8
mT (min)
|Bop - Brp|
= 0.6 mT
(typ)
High Voltage Latches. Temperature rating -40 °C to 125 °C.
silabs.com | Building a more connected world.
Rev. 1.0 | 17
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Ordering Guide
Part
No.
Default
Bop, Brp
Output Type
Output
Polarity Threshold
(High
Field)
Tamper
Temperature
Compensation
Digital Fil- Full
IDD
Sleep
VDD
tering
Scale (Typ @ Time
3.3V)
Si7206- Bop =
Latch
Low (open None
drain)
None
None
20 mT 950 uA 1 ms
3.3 -
26.5 V
B-00-
IV(R)
+1.4 mT
(max)
Bop =
+0.6 mT
(min)
Brp = -1.4
mT (min)
Brp = -0.6
mT (max)
|Bop - Brp|
= 2.0 mT
(typ)
Additional Information
For information on the below specifications of each OPN please refer to the Magnetic Sensors Selector Guide:
• Current Consumption
• Amount of digital filtering applied to the samples
• Time between measurements
• Temperature compensation
A temperature compensation can be applied to the field data to adjust for the variation in field with temperature for common magnet
types.
Note: North pole of a magnet at the bottom of a SOT23 package, top of a DFN 8 package(coming soon) or front of a TO92 package is
defined as positive field.
silabs.com | Building a more connected world.
Rev. 1.0 | 18
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Package Outline
6. Package Outline
6.1 SOT23 3-Pin Package
silabs.com | Building a more connected world.
Rev. 1.0 | 19
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Package Outline
Table 6.1. SOT23 3-Pin Package Dimensions
Dimension
Min
--
Max
1.25
0.10
1.15
0.50
0.20
A
A1
A2
b
0.00
0.85
0.30
0.10
c
D
2.90 BSC
2.75 BSC
1.60 BSC
0.95 BSC
1.90 BSC
E
E1
e
e1
L
0.30
0°
0.60
8°
θ
aaa
bbb
ccc
ddd
0.15
0.20
0.10
0.20
Note:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing per ANSI Y14.5M-1994.
3. This drawing conforms to the JEDEC Solid State Outline MO-193, Variation AB.
4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for Small Body Components.
silabs.com | Building a more connected world.
Rev. 1.0 | 20
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Package Outline
6.2 SOT23-5 5-Pin Package
silabs.com | Building a more connected world.
Rev. 1.0 | 21
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Package Outline
Table 6.2. SOT23-5 5-Pin Package Dimensions
Dimension
Min
--
Max
1.25
0.10
1.15
0.50
0.20
A
A1
A2
b
0.00
0.85
0.30
0.10
c
D
2.90 BSC
2.75 BSC
1.60 BSC
0.95 BSC
1.90 BSC
E
E1
e
e1
L
0.30
0°
0.60
8°
L2
θ
0.25 BSC
aaa
bbb
ccc
ddd
0.15
0.20
0.10
0.20
Note:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing per ANSI Y14.5M-1994.
3. This drawing conforms to the JEDEC Solid State Outline MO-193, Variation AB.
4. Recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for Small Body Components.
silabs.com | Building a more connected world.
Rev. 1.0 | 22
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Package Outline
6.3 TO92S 3-Pin Package
Table 6.3. TO92S 3-Pin Package Dimensions
Dimension
Min
1.42
0.66
0.33
0.40
0
Max
1.62
0.86
0.48
0.51
0.76
0.51
4.10
2.68
3.25
A
A1
b
b1
b2
c
0.33
3.90
2.28
3.05
D
D1
E
e
1.27 TYP
45° TYP
e1
2.44
2.46
L
15.10
15.50
θ
Notes:
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing per ANSI Y14.5M-1994.
silabs.com | Building a more connected world.
Rev. 1.0 | 23
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Land Patterns
7. Land Patterns
7.1 SOT23 3-Pin PCB Land Pattern
Dimension
(mm)
2.70
0.95
1.05
0.60
C
E
X
Y
silabs.com | Building a more connected world.
Rev. 1.0 | 24
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Land Patterns
7.2 SOT23-5 5-Pin PCB Land Pattern
Dimension
(mm)
2.70
0.95
1.05
0.60
C
E
X
Y
Note:
General
1. All dimensions shown are in millimeters (mm) unless otherwise noted.
2. Dimensioning and Tolerancing is per the ANSI Y14.5M-1994 specification.
3. This Land Pattern Design is based on the IPC-7351 guidelines.
4. All dimensions shown are at Maximum Material Condition (MMC). Least Material Condition (LMC) is calculated based on a Fabri-
cation Allowance of 0.05 mm.
Card Assembly
1. A No-Clean, Type-3 solder paste is recommended.
2. The recommended card reflow profile is per the JEDEC/IPC J-STD-020D specification for Small Body Components.
silabs.com | Building a more connected world.
Rev. 1.0 | 25
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Top Marking
8. Top Marking
8.1 SOT23 3-Pin Top Marking
Note: TTTT is a manufacturing code.
silabs.com | Building a more connected world.
Rev. 1.0 | 26
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Top Marking
8.2 SOT23-5 5-Pin Top Marking
Note: TTTT is a manufacturing code.
8.3 TO92 Top Marking
Note: TTTT is a manufacturing code. PPPP is 72xx.
silabs.com | Building a more connected world.
Rev. 1.0 | 27
Si720x Switch/Latch Hall Effect Magnetic Position Sensor Data Sheet
Revision History
9. Revision History
Revision 1.0
July 2018
• Updated power numbers to be consistent with production test limits
• Added more detailed part characteristics to the ordering guide
• Updated detailed description to be clearer and more accurate
Revision 0.92
October 4, 2017
• Added new part number to 5. Ordering Guide (Si7202-B-01-IV(R).
Revision 0.91
August 7, 2017
• Added new part number to 5. Ordering Guide (Si7201-B-08-IV(R).
Revision 0.9
June 30, 2017
• Updated 1. Electrical Specifications .
• Updated 5. Ordering Guide.
• Minor typo corrections.
Revision 0.1
February 1, 2016
• Initial release.
silabs.com | Building a more connected world.
Rev. 1.0 | 28
Smart.
Connected.
Energy-Friendly.
Products
www.silabs.com/products
Quality
www.silabs.com/quality
Support and Community
community.silabs.com
Disclaimer
Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or
intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical"
parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes
without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included
information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted
hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of
Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant
personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass
destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.
Trademark Information
Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®,
EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®,
Gecko®, ISOmodem®, Micrium, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress®, Zentri, Z-Wave and others are trademarks or
registered trademarks of Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited.
All other products or brand names mentioned herein are trademarks of their respective holders.
Silicon Laboratories Inc.
400 West Cesar Chavez
Austin, TX 78701
USA
http://www.silabs.com
相关型号:
©2020 ICPDF网 联系我们和版权申明