SST39VF800A-70-4I-Y1QE [SILICON]
Flash, 512KX16, 70ns, PBGA48, 4 X 6 MM, 0.50 MM PITCH, ROHS COMPLIANT, MO-207C2B-4, WFBGA-48;型号: | SST39VF800A-70-4I-Y1QE |
厂家: | SILICON |
描述: | Flash, 512KX16, 70ns, PBGA48, 4 X 6 MM, 0.50 MM PITCH, ROHS COMPLIANT, MO-207C2B-4, WFBGA-48 内存集成电路 闪存 |
文件: | 总31页 (文件大小:891K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
2 Mbit / 4 Mbit / 8 Mbit (x16) Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
SST39LF/VF200A / 400A / 800A3.0 & 2.7V 2Mb / 4Mb / 8Mb (x16) MPF memories
Data Sheet
FEATURES:
•
•
Organized as 128K x16 / 256K x16 / 512K x16
Single Voltage Read and Write Operations
– 3.0-3.6V for SST39LF200A/400A/800A
– 2.7-3.6V for SST39VF200A/400A/800A
Superior Reliability
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
Low Power Consumption
(typical values at 14 MHz)
– Active Current: 9 mA (typical)
– Standby Current: 3 µA (typical)
•
Fast Erase and Word-Program
– Sector-Erase Time: 18 ms (typical)
– Block-Erase Time: 18 ms (typical)
– Chip-Erase Time: 70 ms (typical)
– Word-Program Time: 14 µs (typical)
– Chip Rewrite Time:
•
•
2 seconds (typical) for SST39LF/VF200A
4 seconds (typical) for SST39LF/VF400A
8 seconds (typical) for SST39LF/VF800A
•
•
Automatic Write Timing
– Internal VPP Generation
End-of-Write Detection
•
•
•
Sector-Erase Capability
– Uniform 2 KWord sectors
Block-Erase Capability
– Uniform 32 KWord blocks
Fast Read Access Time
– 45 and 55 ns for SST39LF200A
– 55 ns for SST39LF400A/800A
– 70 ns for SST39VF200A/400A/800A
– Toggle Bit
– Data# Polling
CMOS I/O Compatibility
JEDEC Standard
– Flash EEPROM Pinouts and command sets
Packages Available
– 48-lead TSOP (12mm x 20mm)
– 48-ball TFBGA (6mm x 8mm)
– 48-ball WFBGA (4mm x 6mm)
•
•
•
•
Latched Address and Data
– 48-bump XFLGA (4mm x 6mm) – 4 and 8Mbit
•
All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A devices are 128K x16 / 256K x16 / 512K x16 CMOS
Multi-Purpose Flash (MPF) manufactured with SST propri-
etary, high-performance CMOS SuperFlash technology.
The split-gate cell design and thick oxide tunneling injector
attain better reliability and manufacturability compared with
alternate approaches. The SST39LF200A/400A/800A
write (Program or Erase) with a 3.0-3.6V power supply.
The SST39VF200A/400A/800A write (Program or Erase)
with a 2.7-3.6V power supply. These devices conform to
JEDEC standard pinouts for x16 memories.
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A devices are suited for applications that require con-
venient and economical updating of program, configura-
tion, or data memory. For all system applications, they
significantly improve performance and reliability, while low-
ering power consumption. They inherently use less energy
during Erase and Program than alternative flash technolo-
gies. When programming a flash device, the total energy
consumed is a function of the applied voltage, current, and
time of application. Since for any given voltage range, the
SuperFlash technology uses less current to program and
has a shorter erase time, the total energy consumed dur-
ing any Erase or Program operation is less than alternative
flash technologies. These devices also improve flexibility
while lowering the cost for program, data, and configura-
tion storage applications.
Featuring
high-performance
Word-Program,
the
SST39LF200A/400A/800A and SST39VF200A/400A/
800A devices provide a typical Word-Program time of 14
µsec. The devices use Toggle Bit or Data# Polling to detect
the completion of the Program or Erase operation. To pro-
tect against inadvertent write, they have on-chip hardware
and software data protection schemes. Designed, manu-
factured, and tested for a wide spectrum of applications,
these devices are offered with a guaranteed typical endur-
ance of 100,000 cycles. Data retention is rated at greater
than 100 years.
The SuperFlash technology provides fixed Erase and Pro-
gram times, independent of the number of Erase/Program
cycles that have occurred. Therefore the system software
or hardware does not have to be modified or de-rated as is
necessary with alternative flash technologies, whose
Erase and Program times increase with accumulated
Erase/Program cycles.
©2007 Silicon Storage Technology, Inc.
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.
MPF is a trademark of Silicon Storage Technology, Inc.
S71117-10-000
1
08/07
These specifications are subject to change without notice.
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
To meet surface mount requirements, the SST39LF200A/
400A/800A and SST39VF200A/400A/800A are offered in
48-lead TSOP packages and 48-ball TFBGA packages as
well as Micro-Packages. See Figures 2, 3, and 4 for pin
assignments.
Sector/Block-Erase Operation
The Sector- (or Block-) Erase operation allows the system
to erase the device on a sector-by-sector (or block-by-
block) basis. The SST39LF200A/400A/800A and
SST39VF200A/400A/800A offers both Sector-Erase and
Block-Erase mode. The sector architecture is based on
uniform sector size of 2 KWord. The Block-Erase mode is
based on uniform block size of 32 KWord. The Sector-
Erase operation is initiated by executing a six-byte com-
mand sequence with Sector-Erase command (30H) and
sector address (SA) in the last bus cycle. The Block-Erase
operation is initiated by executing a six-byte command
sequence with Block-Erase command (50H) and block
address (BA) in the last bus cycle. The sector or block
address is latched on the falling edge of the sixth WE#
pulse, while the command (30H or 50H) is latched on the
rising edge of the sixth WE# pulse. The internal Erase
operation begins after the sixth WE# pulse. The End-of-
Erase operation can be determined using either Data#
Polling or Toggle Bit methods. See Figures 11 and 12 for
timing waveforms. Any commands issued during the Sec-
tor- or Block-Erase operation are ignored.
Device Operation
Commands are used to initiate the memory operation func-
tions of the device. Commands are written to the device
using standard microprocessor write sequences. A com-
mand is written by asserting WE# low while keeping CE#
low. The address bus is latched on the falling edge of WE#
or CE#, whichever occurs last. The data bus is latched on
the rising edge of WE# or CE#, whichever occurs first.
Read
The Read operation of the SST39LF200A/400A/800A and
SST39VF200A/400A/800A is controlled by CE# and OE#,
both have to be low for the system to obtain data from the
outputs. CE# is used for device selection. When CE# is
high, the chip is deselected and only standby power is con-
sumed. OE# is the output control and is used to gate data
from the output pins. The data bus is in high impedance
state when either CE# or OE# is high. Refer to the Read
cycle timing diagram for further details (Figure 5).
Chip-Erase Operation
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A provide a Chip-Erase operation, which allows the
user to erase the entire memory array to the “1” state. This
is useful when the entire device must be quickly erased.
Word-Program Operation
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A are programmed on a word-by-word basis. Before
programming, the sector where the word exists must be
fully erased. The Program operation is accomplished in
three steps. The first step is the three-byte load sequence
for Software Data Protection. The second step is to load
word address and word data. During the Word-Program
operation, the addresses are latched on the falling edge of
either CE# or WE#, whichever occurs last. The data is
latched on the rising edge of either CE# or WE#, whichever
occurs first. The third step is the internal Program operation
which is initiated after the rising edge of the fourth WE# or
CE#, whichever occurs first. The Program operation, once
initiated, will be completed within 20 µs. See Figures 6 and
7 for WE# and CE# controlled Program operation timing
diagrams and Figure 18 for flowcharts. During the Program
operation, the only valid reads are Data# Polling and Tog-
gle Bit. During the internal Program operation, the host is
free to perform additional tasks. Any commands issued
during the internal Program operation are ignored.
The Chip-Erase operation is initiated by executing a six-
byte command sequence with Chip-Erase command (10H)
at address 5555H in the last byte sequence. The Erase
operation begins with the rising edge of the sixth WE# or
CE#, whichever occurs first. During the Erase operation,
the only valid read is Toggle Bit or Data# Polling. See Table
4 for the command sequence, Figure 10 for timing diagram,
and Figure 21 for the flowchart. Any commands issued dur-
ing the Chip-Erase operation are ignored.
Write Operation Status Detection
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A provide two software means to detect the completion
of a write (Program or Erase) cycle, in order to optimize the
system write cycle time. The software detection includes
two status bits: Data# Polling (DQ7) and Toggle Bit (DQ6).
The End-of-Write detection mode is enabled after the rising
edge of WE#, which initiates the internal Program or Erase
operation.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
2
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
The actual completion of the nonvolatile write is asynchro-
Data Protection
nous with the system; therefore, either a Data# Polling or
Toggle Bit read may be simultaneous with the completion
of the write cycle. If this occurs, the system may possibly
get an erroneous result, i.e., valid data may appear to con-
flict with either DQ7 or DQ6. In order to prevent spurious
rejection, if an erroneous result occurs, the software routine
should include a loop to read the accessed location an
additional two (2) times. If both reads are valid, then the
device has completed the write cycle, otherwise the rejec-
tion is valid.
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A provide both hardware and software features to pro-
tect nonvolatile data from inadvertent writes.
Hardware Data Protection
Noise/Glitch Protection: A WE# or CE# pulse of less than
5 ns will not initiate a write cycle.
VDD Power Up/Down Detection: The Write operation is
inhibited when VDD is less than 1.5V.
Write Inhibit Mode: Forcing OE# low, CE# high, or WE#
high will inhibit the Write operation. This prevents inadvert-
ent writes during power-up or power-down.
Data# Polling (DQ7)
When the SST39LF200A/400A/800A and SST39VF200A/
400A/800A are in the internal Program operation, any
attempt to read DQ7 will produce the complement of the
true data. Once the Program operation is completed, DQ7
will produce true data. Note that even though DQ7 may
have valid data immediately following the completion of an
internal Write operation, the remaining data outputs may
still be invalid: valid data on the entire data bus will appear
in subsequent successive Read cycles after an interval of
1 µs. During internal Erase operation, any attempt to read
DQ7 will produce a ‘0’. Once the internal Erase operation
is completed, DQ7 will produce a ‘1’. The Data# Polling is
valid after the rising edge of fourth WE# (or CE#) pulse for
Program operation. For Sector-, Block- or Chip-Erase, the
Data# Polling is valid after the rising edge of sixth WE# (or
CE#) pulse. See Figure 8 for Data# Polling timing diagram
and Figure 19 for a flowchart.
Software Data Protection (SDP)
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A provide the JEDEC approved Software Data Protec-
tion scheme for all data alteration operations, i.e., Program
and Erase. Any Program operation requires the inclusion of
the three-byte sequence. The three-byte load sequence is
used to initiate the Program operation, providing optimal
protection from inadvertent Write operations, e.g., during
the system power-up or power-down. Any Erase operation
requires the inclusion of six-byte sequence. This group of
devices are shipped with the Software Data Protection per-
manently enabled. See Table 4 for the specific software
command codes. During SDP command sequence, invalid
commands will abort the device to Read mode within TRC.
The contents of DQ15-DQ8 can be VIL or VIH, but no other
value, during any SDP command sequence.
Toggle Bit (DQ6)
During the internal Program or Erase operation, any con-
secutive attempts to read DQ6 will produce alternating 1s
and 0s, i.e., toggling between 1 and 0. When the internal
Program or Erase operation is completed, the DQ6 bit will
stop toggling. The device is then ready for the next opera-
tion. The Toggle Bit is valid after the rising edge of fourth
WE# (or CE#) pulse for Program operation. For Sector-,
Block- or Chip-Erase, the Toggle Bit is valid after the rising
edge of sixth WE# (or CE#) pulse. See Figure 9 for Toggle
Bit timing diagram and Figure 19 for a flowchart.
Common Flash Memory Interface (CFI)
The SST39LF200A/400A/800A and SST39VF200A/400A/
800A also contain the CFI information to describe the char-
acteristics of the device. In order to enter the CFI Query
mode, the system must write three-byte sequence, same
as Software ID Entry command with 98H (CFI Query com-
mand) to address 5555H in the last byte sequence. Once
the device enters the CFI Query mode, the system can
read CFI data at the addresses given in Tables 5 through 9.
The system must write the CFI Exit command to return to
Read mode from the CFI Query mode.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
3
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Product Identification
Product Identification Mode Exit/
CFI Mode Exit
The Product Identification mode identifies the devices as
the SST39LF/VF200A, SST39LF/VF400A and SST39LF/
VF800A and manufacturer as SST. This mode may be
accessed by software operations. Users may use the
Software Product Identification operation to identify the part
(i.e., using the device ID) when using multiple
manufacturers in the same socket. For details, see Table 4
for software operation, Figure 13 for the Software ID Entry
and Read timing diagram, and Figure 20 for the Software
ID Entry command sequence flowchart.
In order to return to the standard Read mode, the Software
Product Identification mode must be exited. Exit is accom-
plished by issuing the Software ID Exit command
sequence, which returns the device to the Read mode.
This command may also be used to reset the device to the
Read mode after any inadvertent transient condition that
apparently causes the device to behave abnormally, e.g.,
not read correctly. Please note that the Software ID Exit/
CFI Exit command is ignored during an internal Program or
Erase operation. See Table 4 for software command
codes, Figure 15 for timing waveform, and Figure 20 for a
flowchart.
TABLE 1: Product Identification
Address
Data
Manufacturer’s ID
Device ID
0000H
00BFH
SST39LF/VF200A
SST39LF/VF400A
SST39LF/VF800A
0001H
0001H
0001H
2789H
2780H
2781H
T1.3 1117
SuperFlash
Memory
X-Decoder
Memory Address
Address Buffer & Latches
Control Logic
Y-Decoder
CE#
I/O Buffers and Data Latches
OE#
WE#
DQ - DQ
15
0
1117 B1.2
FIGURE 1: Functional Block Diagram
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
4
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
SST39LF/VF800A SST39LF/VF400A SST39LF/VF200A
SST39LF/VF200A SST39LF/VF400A SST39LF/VF800A
A15
A14
A13
A12
A11
A10
A9
A15
A14
A13
A12
A11
A10
A9
A15
A14
A13
A12
A11
A10
A9
1
2
3
4
5
6
7
8
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
A16
NC
A16
NC
A16
NC
V
V
V
SS
SS
SS
DQ15
DQ7
DQ15
DQ7
DQ15
DQ7
DQ14
DQ6
DQ13
DQ5
DQ12
DQ4
DQ14
DQ6
DQ13
DQ5
DQ12
DQ4
DQ14
DQ6
DQ13
DQ5
DQ12
DQ4
A8
A8
A8
Standard Pinout
Top View
NC
NC
WE#
NC
NC
NC
NC
A18
A17
A7
A6
A5
A4
A3
A2
A1
NC
NC
WE#
NC
NC
NC
NC
NC
A17
A7
A6
A5
A4
A3
A2
A1
NC
NC
WE#
NC
NC
NC
NC
NC
NC
A7
A6
A5
A4
A3
A2
A1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
V
V
V
DD
DD
DD
Die Up
DQ11
DQ3
DQ10
DQ2
DQ9
DQ1
DQ8
DQ0
OE#
DQ11
DQ3
DQ10
DQ2
DQ9
DQ1
DQ8
DQ0
OE#
DQ11
DQ3
DQ10
DQ2
DQ9
DQ1
DQ8
DQ0
OE#
V
CE#
V
CE#
V
CE#
SS
SS
SS
A0
A0
A0
1117 48-tsop P01.2
FIGURE 2: Pin Assignments for 48-Lead TSOP
TOP VIEW (balls facing down)
SST39LF/VF200A
6
5
4
3
2
1
A13 A12 A14 A15 A16 NC DQ15 V
SS
A9
A8 A10 A11 DQ7 DQ14 DQ13 DQ6
WE# NC
NC NC
A7 NC
NC
NC
A6
A2
NC DQ5 DQ12
V
DQ4
DD
NC DQ2 DQ10 DQ11 DQ3
A5 DQ0 DQ8 DQ9 DQ1
A3
A4
A1
A0 CE# OE# V
SS
A B C D E F G H
TOP VIEW (balls facing down)
SST39LF/VF400A
TOP VIEW (balls facing down)
SST39LF/VF800A
6
5
4
3
2
1
6
A13 A12 A14 A15 A16 NC DQ15 V
A13 A12 A14 A15 A16 NC DQ15 V
SS
SS
A8 A10 A11 DQ7 DQ14 DQ13 DQ6
WE# NC NC NC DQ5 DQ12 DQ4
NC NC A18 NC DQ2 DQ10 DQ11 DQ3
A7 A17 A6 A5 DQ0 DQ8 DQ9 DQ1
A3 A4 A2 A1 A0 CE# OE#
5
4
3
2
1
A9
A8 A10 A11 DQ7 DQ14 DQ13 DQ6
A9
WE# NC
NC NC
NC
NC
NC DQ5 DQ12
V
DQ4
V
DD
DD
NC DQ2 DQ10 DQ11 DQ3
A5 DQ0 DQ8 DQ9 DQ1
A7 A17 A6
A3 A4 A2
A1
A0 CE# OE#
V
V
SS
SS
A B C D E F G H
A B C D E F G H
FIGURE 3: Pin Assignments for 48-Ball TFBGA
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
5
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TOP VIEW (balls facing down)
SST39VF200A
6
5
4
3
2
1
A2
A1
A0
A4
A3
A5
A6
A7
NC
NC
NC
NC
NC WE# NC
NC A10 A13 A14
A8 A12 A15
A9
A11
CE# DQ8 DQ10
OE# DQ9 NC
DQ0 DQ1 DQ2 DQ3
DQ4 DQ11 A16
V
SS
NC DQ5 DQ6 DQ7
V
DQ12 DQ13 DQ14 DQ15 V
SS
DD
A B
C
D
E
F
G H
J
K
L
TOP VIEW (balls facing down)
SST39LF/VF400A
6
5
4
3
2
1
A2
A1
A0
A4
A6
A7
NC
A17 NC
NC
NC WE# NC
A9
A11
A3
A5
NC A10 A13 A14
A8 A12 A15
CE# DQ8 DQ10
OE# DQ9 NC
DQ0 DQ1 DQ2 DQ3
DQ4 DQ11 A16
V
SS
NC DQ5 DQ6 DQ7
V
DQ12 DQ13 DQ14 DQ15 V
SS
DD
A B C D
E
F
G H
J
K
L
TOP VIEW (balls facing down)
SST39LF/VF800A
6
A2
A1
A0
A4
A3
A6
A7
A17 NC
NC
NC WE# NC
NC A10 A13 A14
A8 A12 A15
A9
A11
5
4
3
2
1
A5 A18
CE# DQ8 DQ10
OE# DQ9 NC
DQ0 DQ1 DQ2 DQ3
DQ4 DQ11 A16
V
SS
NC DQ5 DQ6 DQ7
V
DQ12 DQ13 DQ14 DQ15 V
SS
DD
A B C D
E
F
G H
J
K
L
FIGURE 4: Pin Assignments for 48-Ball WFBGA and 48-Bump XFLGA
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
6
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 2: Pin Description
Symbol
Pin Name
Functions
AMS1-A0
Address Inputs
To provide memory addresses. During Sector-Erase AMS-A11 address lines will select the
sector. During Block-Erase AMS-A15 address lines will select the block.
DQ15-DQ0
Data Input/output
To output data during Read cycles and receive input data during Write cycles.
Data is internally latched during a Write cycle.
The outputs are in tri-state when OE# or CE# is high.
CE#
OE#
WE#
VDD
Chip Enable
Output Enable
Write Enable
Power Supply
To activate the device when CE# is low.
To gate the data output buffers.
To control the Write operations.
To provide power supply voltage:
3.0-3.6V for SST39LF200A/400A/800A
2.7-3.6V for SST39VF200A/400A/800A
VSS
NC
Ground
No Connection
Unconnected pins.
T2.2 1117
1. AMS = Most significant address
MS = A16 for SST39LF/VF200A, A17 for SST39LF/VF400A, and A18 for SST39LF/VF800A
A
TABLE 3: Operation Modes Selection
Mode
Read
CE#
VIL
OE#
VIL
WE#
VIH
VIL
DQ
DOUT
DIN
X1
Address
AIN
Program
Erase
VIL
VIH
VIH
AIN
VIL
VIL
Sector or Block address,
XXH for Chip-Erase
Standby
VIH
X
X
VIL
X
X
X
High Z
X
X
X
Write Inhibit
High Z/ DOUT
High Z/ DOUT
X
VIH
Product Identification
Software Mode
VIL
VIL
VIH
See Table 4
T3.4 1117
1. X can be VIL or VIH, but no other value.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
7
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 4: Software Command Sequence
Command
Sequence
1st Bus
Write Cycle
2nd Bus
Write Cycle
3rd Bus
Write Cycle
4th Bus
Write Cycle
5th Bus
Write Cycle
6th Bus
Write Cycle
Addr1 Data2 Addr1 Data2 Addr1 Data2 Addr1 Data2 Addr1 Data2 Addr1 Data2
5555H AAH 2AAAH 55H 5555H A0H Data
WA3
Word-Program
Sector-Erase
Block-Erase
Chip-Erase
4
5555H AAH 2AAAH 55H 5555H 80H 5555H AAH 2AAAH 55H
5555H AAH 2AAAH 55H 5555H 80H 5555H AAH 2AAAH 55H
SAX
BAX
30H
50H
4
5555H AAH 2AAAH 55H 5555H 80H 5555H AAH 2AAAH 55H 5555H 10H
Software ID Entry5,6 5555H AAH 2AAAH 55H 5555H 90H
CFI Query Entry5
Software ID Exit7/
CFI Exit
5555H AAH 2AAAH 55H 5555H 98H
XXH F0H
Software ID Exit7/
CFI Exit
5555H AAH 2AAAH 55H 5555H F0H
T4.3 1117
1. Address format A14-A0 (Hex), Addresses AMS-A15 can be VIL or VIH, but no other value, for the Command sequence.
A
A
MS = Most significant address
MS = A16 for SST39LF/VF200A, A17 for SST39LF/VF400A, and A18 for SST39LF/VF800A
2. DQ15-DQ8 can be VIL or VIH, but no other value, for the Command sequence
3. WA = Program word address
4. SAX for Sector-Erase; uses AMS-A11 address lines
BAX for Block-Erase; uses AMS-A15 address lines
5. The device does not remain in Software Product ID mode if powered down.
6. With AMS-A1 = 0; SST Manufacturer’s ID = 00BFH, is read with A0 = 0,
SST39LF/VF200A Device ID = 2789H, is read with A0 = 1.
SST39LF/VF400A Device ID = 2780H, is read with A0 = 1.
SST39LF/VF800A Device ID = 2781H, is read with A0 = 1.
7. Both Software ID Exit operations are equivalent
TABLE 5: CFI Query Identification String1 for SST39LF200A/400A/800A and SST39VF200A/400A/800A
Address
10H
11H
12H
13H
14H
15H
16H
17H
Data
Data
0051H
0052H
0059H
0001H
0007H
0000H
0000H
0000H
0000H
0000H
0000H
Query Unique ASCII string “QRY”
Primary OEM command set
Address for Primary Extended Table
Alternate OEM command set (00H = none exists)
Address for Alternate OEM extended Table (00H = none exits)
18H
19H
1AH
T5.0 1117
1. Refer to CFI publication 100 for more details.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
8
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 6: System Interface Information for SST39LF200A/400A/800A and SST39VF200A/400A/800A
Address
Data
Data
1BH
0027H1
0030H1
0036H
VDD Min (Program/Erase)
DQ7-DQ4: Volts, DQ3-DQ0: 100 millivolts
1CH
VDD Max (Program/Erase)
DQ7-DQ4: Volts, DQ3-DQ0: 100 millivolts
1DH
1EH
1FH
20H
21H
22H
23H
24H
25H
26H
0000H
0000H
0004H
0000H
0004H
0006H
0001H
0000H
0001H
0001H
VPP min (00H = no VPP pin)
VPP max (00H = no VPP pin)
Typical time out for Word-Program 2N µs (24 = 16 µs)
Typical time out for min size buffer program 2N µs (00H = not supported)
Typical time out for individual Sector/Block-Erase 2N ms (24 = 16 ms)
Typical time out for Chip-Erase 2N ms (26 = 64 ms)
Maximum time out for Word-Program 2N times typical (21 x 24 = 32 µs)
Maximum time out for buffer program 2N times typical
Maximum time out for individual Sector/Block-Erase 2N times typical (21 x 24 = 32 ms)
Maximum time out for Chip-Erase 2N times typical (21 x 26 = 128 ms)
T6.2 1117
1. 0030H for SST39LF200A/400A/800A and 0027H for SST39VF200A/400A/800A
TABLE 7: Device Geometry Information for SST39LF/VF200A
Address
27H
28H
Data
Data
0012H
0001H
0000H
0000H
Device size = 2N Byte (12H = 18; 218 = 256 KByte)
Flash Device Interface description; 0001H = x16-only asynchronous interface
29H
2AH
2BH
2CH
2DH
2EH
2FH
30H
31H
32H
33H
34H
Maximum number of bytes in multi-byte write = 2N (00H = not supported)
0002H
003FH
0000H
0010H
0000H
0003H
0000H
0000H
0001H
Number of Erase Sector/Block sizes supported by device
Sector Information (y + 1 = Number of sectors; z x 256B = sector size)
y = 63 + 1 = 64 sectors (003FH = 63)
z = 16 x 256 Bytes = 4 KByte/sector (0010H = 16)
Block Information (y + 1 = Number of blocks; z x 256B = block size)
y = 3 + 1 = 4 blocks (0003H = 3)
z = 256 x 256 Bytes = 64 KByte/block (0100H = 256)
T7.2 1117
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
9
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 8: Device Geometry Information for SST39LF/VF400A
Address
27H
28H
Data
Data
0013H
0001H
0000H
0000H
0000H
0002H
007FH
0000H
0010H
0000H
0007H
0000H
0000H
0001H
Device size = 2N Byte (13H = 19; 219 = 512 KByte)
Flash Device Interface description; 0001H = x16-only asynchronous interface
29H
2AH
2BH
2CH
2DH
2EH
2FH
30H
31H
32H
33H
34H
Maximum number of bytes in multi-byte write = 2N (00H = not supported)
Number of Erase Sector/Block sizes supported by device
Sector Information (y + 1 = Number of sectors; z x 256B = sector size)
y = 127 + 1 = 128 sectors (007FH = 127)
z = 16 x 256 Bytes = 4 KByte/sector (0010H = 16)
Block Information (y + 1 = Number of blocks; z x 256B = block size)
y = 7 + 1 = 8 blocks (0007H = 7)
z = 256 x 256 Bytes = 64 KByte/block (0100H = 256)
T8.1 1117
TABLE 9: Device Geometry Information for SST39LF/VF800A
Address
27H
28H
Data
Data
0014H
0001H
0000H
0000H
0000H
0002H
00FFH
0000H
0010H
0000H
000FH
0000H
0000H
0001H
Device size = 2N Bytes (14H = 20; 220 = 1 MByte)
Flash Device Interface description; 0001H = x16-only asynchronous interface
29H
2AH
2BH
2CH
2DH
2EH
2FH
30H
31H
32H
33H
34H
Maximum number of bytes in multi-byte write = 2N (00H = not supported)
Number of Erase Sector/Block sizes supported by device
Sector Information (y + 1 = Number of sectors; z x 256B = sector size)
y = 255 + 1 = 256 sectors (00FFH = 255)
z = 16 x 256 Bytes = 4 KByte/sector (0010H = 16)
Block Information (y + 1 = Number of blocks; z x 256B = block size)
y = 15 + 1 = 16 blocks (000FH = 15)
z = 256 x 256 Bytes = 64 KByte/block (0100H = 256)
T9.0 1117
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
10
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute Maximum
Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation
of the device at these conditions or conditions greater than those defined in the operational sections of this data
sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.)
Temperature Under Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C to +150°C
D. C. Voltage on Any Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to VDD+0.5V
Transient Voltage (<20 ns) on Any Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-2.0V to VDD+2.0V
Voltage on A9 Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 13.2V
Package Power Dissipation Capability (TA = 25°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0W
Surface Mount Solder Reflow Temperature1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C for 10 seconds
Output Short Circuit Current2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
1. Excluding certain with-Pb 32-PLCC units, all packages are 260°C capable in both non-Pb and with-Pb solder versions.
Certain with-Pb 32-PLCC package types are capable of 240°C for 10 seconds; please consult the factory for the latest information.
2. Outputs shorted for no more than one second. No more than one output shorted at a time.
Operating Range: SST39LF200A/400A/800A
Range
Ambient Temp
VDD
Commercial
0°C to +70°C
3.0-3.6V
Operating Range: SST39VF200A/400A/800A
Range
Ambient Temp
0°C to +70°C
VDD
Commercial
Industrial
2.7-3.6V
2.7-3.6V
-40°C to +85°C
AC Conditions of Test
Input Rise/Fall Time . . . . . . . . . . . . . . 5 ns
Output Load . . . . . . . . . . . . . . . . . . . . CL = 30 pF for SST39LF200A/400A/800A
Output Load . . . . . . . . . . . . . . . . . . . . CL = 100 pF for SST39VF200A/400A/800A
See Figures 16 and 17
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
11
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 10: DC Operating Characteristics
VDD = 3.0-3.6V for SST39LF200A/400A/800A and 2.7-3.6V for SST39VF200A/400A/800A1
Limits
Symbol Parameter
Min
Max
Units
Test Conditions
IDD
Power Supply Current
Address input=VILT/VIHT, at f=1/TRC Min,
VDD=VDD Max
Read2
30
30
20
1
mA
mA
µA
µA
µA
CE#=VIL, OE#=WE#=VIH, all I/Os open
CE#=WE#=VIL, OE#=VIH
CE#=VIHC, VDD=VDD Max
VIN=GND to VDD, VDD=VDD Max
VOUT=GND to VDD, VDD=VDD Max
VDD=VDD Min
Program and Erase
Standby VDD Current
Input Leakage Current
Output Leakage Current
Input Low Voltage
ISB
ILI
ILO
10
0.8
VIL
VIH
VIHC
VOL
VOH
Input High Voltage
Input High Voltage (CMOS)
Output Low Voltage
Output High Voltage
0.7VDD
V
V
V
V
VDD=VDD Max
VDD-0.3
VDD=VDD Max
0.2
IOL=100 µA, VDD=VDD Min
VDD-0.2
IOH=-100 µA, VDD=VDD Min
T10.7 1117
1. Typical conditions for the Active Current shown on page 1 are average values at 25°C (room temperature),
and VDD = 3V for VF devices. Not 100% tested.
2. Values are for 70 ns conditions. See the Multi-Purpose Flash Power Rating application note for further information.
TABLE 11: Recommended System Power-up Timings
Symbol
Parameter
Minimum
100
Units
µs
1
TPU-READ
Power-up to Read Operation
Power-up to Program/Erase Operation
1
TPU-WRITE
100
µs
T11.0 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
TABLE 12: Capacitance (TA = 25°C, f=1 Mhz, other pins open)
Parameter
Description
Test Condition
VI/O = 0V
Maximum
1
CI/O
I/O Pin Capacitance
Input Capacitance
12 pF
6 pF
1
CIN
VIN = 0V
T12.0 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
TABLE 13: Reliability Characteristics
Symbol
Parameter
Endurance
Data Retention
Latch Up
Minimum Specification
Units
Cycles
Years
mA
Test Method
1,2
NEND
10,000
100
JEDEC Standard A117
JEDEC Standard A103
JEDEC Standard 78
1
TDR
1
ILTH
100 + IDD
T13.2 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
2. NEND endurance rating is qualified as a 10,000 cycle minimum for the whole device. A sector- or block-level rating would result in a
higher minimum specification.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
12
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
AC CHARACTERISTICS
TABLE 14: Read Cycle Timing Parameters VDD = 3.0-3.6V
SST39LF200A-45
SST39LF200A/400A/800A-55
Symbol Parameter
Min
Max
Min
Max
Units
ns
TRC
TCE
TAA
Read Cycle Time
45
55
Chip Enable Access Time
Address Access Time
45
45
30
55
55
30
ns
ns
TOE
TCLZ
TOLZ
Output Enable Access Time
CE# Low to Active Output
OE# Low to Active Output
CE# High to High-Z Output
OE# High to High-Z Output
Output Hold from Address Change
ns
1
1
0
0
0
0
ns
ns
1
TCHZ
15
15
15
15
ns
1
TOHZ
ns
1
TOH
0
0
ns
T14.7 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
TABLE 15: Read Cycle Timing Parameters VDD = 2.7-3.6V
SST39VF200A/400A/800A-70
Symbol Parameter
Min
Max
Units
ns
TRC
TCE
TAA
Read Cycle Time
70
Chip Enable Access Time
Address Access Time
70
70
35
ns
ns
TOE
TCLZ
TOLZ
Output Enable Access Time
CE# Low to Active Output
OE# Low to Active Output
CE# High to High-Z Output
OE# High to High-Z Output
Output Hold from Address Change
ns
1
1
0
0
ns
ns
1
TCHZ
TOHZ
20
20
ns
1
ns
1
TOH
0
ns
T15.7 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
13
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 16: Program/Erase Cycle Timing Parameters
Symbol Parameter
Min
Max
Units
µs
TBP
Word-Program Time
Address Setup Time
Address Hold Time
WE# and CE# Setup Time
WE# and CE# Hold Time
OE# High Setup Time
OE# High Hold Time
CE# Pulse Width
20
TAS
0
30
0
ns
TAH
ns
TCS
ns
TCH
TOES
TOEH
TCP
0
ns
0
ns
10
40
40
30
30
30
0
ns
ns
TWP
TWPH
WE# Pulse Width
ns
1
WE# Pulse Width High
CE# Pulse Width High
Data Setup Time
ns
1
TCPH
TDS
ns
ns
1
TDH
Data Hold Time
ns
1
TIDA
Software ID Access and Exit Time
Sector-Erase
150
25
ns
TSE
ms
ms
ms
TBE
Block-Erase
25
TSCE
Chip-Erase
100
T16.0 1117
1. This parameter is measured only for initial qualification and after a design or process change that could affect this parameter.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
14
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
T
T
AA
RC
ADDRESS A
MS-0
T
CE
CE#
T
OE
OE#
WE#
T
OHZ
T
OLZ
V
IH
T
T
CHZ
T
CLZ
OH
HIGH-Z
HIGH-Z
DQ
DATA VALID
DATA VALID
15-0
Note:
A
MS
A
MS
= Most significant address
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
16
17
18
1117 F03.2
FIGURE 5: Read Cycle Timing Diagram
INTERNAL PROGRAM OPERATION STARTS
T
BP
5555
2AAA
5555
ADDR
ADDRESS A
MS-0
T
AH
T
DH
T
WP
WE#
T
T
DS
WPH
T
AS
OE#
CE#
T
CH
T
CS
DQ
XXAA
SW0
XX55
SW1
XXA0
SW2
DATA
15-0
WORD
(ADDR/DATA)
Note:
A
MS
A
MS
= Most significant address
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
16 17 18
X can be V or V , but no other value.
IL IH
1117 F04.4
FIGURE 6: WE# Controlled Program Cycle Timing Diagram
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
15
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
INTERNAL PROGRAM OPERATION STARTS
T
BP
5555
2AAA
5555
ADDR
ADDRESS A
MS-0
T
AH
T
DH
T
CP
CE#
OE#
WE#
T
CPH
T
T
AS
DS
T
CH
T
CS
DQ
XXAA
SW0
XX55
SW1
XXA0
SW2
DATA
15-0
WORD
(ADDR/DATA)
Note:
A
A
= Most significant address
MS
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
16
17
18
MS
X can be V or V but no other value.
IL
IH,
1117 F05.4
FIGURE 7: CE# Controlled Program Cycle Timing Diagram
ADDRESS A
MS-0
T
CE
CE#
T
T
OEH
OES
OE#
T
OE
WE#
DQ
DATA
DATA#
DATA#
DATA
7
Note:
A
A
= Most significant address
MS
MS
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
16
17
18
1117 F06.3
FIGURE 8: Data# Polling Timing Diagram
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
16
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
ADDRESS A
MS-0
T
CE
CE#
T
T
T
OES
OE
OEH
OE#
WE#
DQ
6
TWO READ CYCLES
WITH SAME OUTPUTS
Note:
A
A
= Most significant address
MS
MS
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
16
17
18
1117 F07.3
FIGURE 9: Toggle Bit Timing Diagram
T
SIX-BYTE CODE FOR CHIP-ERASE
5555 5555 2AAA
SCE
5555
2AAA
5555
ADDRESS A
MS-0
CE#
OE#
WE#
T
WP
DQ
XXAA
SW0
XX55
SW1
XX80
SW2
XXAA
SW3
XX55
SW4
XX10
SW5
15-0
Note: This device also supports CE# controlled Chip-Erase operation. The WE# and CE# signals are
interchageable as long as minimum timings are met. (See Table 16)
A
= Most significant address
MS
A
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
MS
16 17 18
X can be V or V , but no other value.
IL IH
1117 F08.7
FIGURE 10: WE# Controlled Chip-Erase Timing Diagram
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
17
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
T
SIX-BYTE CODE FOR BLOCK-ERASE
BE
ADDRESS A
5555
2AAA
5555
5555
2AAA
BA
X
MS-0
CE#
OE#
WE#
T
WP
DQ
XXAA
SW0
XX55
SW1
XX80
SW2
XXAA
SW3
XX55
SW4
XX50
SW5
15-0
Note: This device also supports CE# controlled Block-Erase operation. The WE# and CE# signals are
interchageable as long as minimum timings are met. (See Table 16)
BA = Block Address
X
A
= Most significant address
MS
A
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
MS
16 17 18
X can be V or V , but no other value.
IL
IH
1117 F17.9
FIGURE 11: WE# Controlled Block-Erase Timing Diagram
T
SIX-BYTE CODE FOR SECTOR-ERASE
SE
ADDRESS A
5555
2AAA
5555
5555
2AAA
SA
X
MS-0
CE#
OE#
WE#
T
WP
DQ
XXAA
SW0
XX55
SW1
XX80
SW2
XXAA
SW3
XX55
SW4
XX30
SW5
15-0
Note: This device also supports CE# controlled Sector-Erase operation. The WE# and CE# signals are
interchageable as long as minimum timings are met. (See Table 16)
SA = Sector Address
X
A
= Most significant address
MS
A
= A for SST39LF/VF200A, A for SST39LF/VF400A and A for SST39LF/VF800A
MS
16 17 18
1117 F18.8
X can be V or V , but no other value.
IL
IH
FIGURE 12: WE# Controlled Sector-Erase Timing Diagram
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
18
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
THREE-BYTE SEQUENCE FOR
SOFTWARE ID ENTRY
ADDRESS A
5555
2AAA
5555
0000
0001
14-0
CE#
OE#
WE#
T
WP
T
IDA
T
T
WPH
AA
DQ
XXAA
SW0
XX55
SW1
XX90
SW2
00BF
Device ID
15-0
Device ID = 2789H for SST39LF/VF200A, 2780H for SST39LF/VF400A and 2781H for SST39LF/VF800A
Note: X can be V or V , but no other value.
IL IH
1117 F09.4
FIGURE 13: Software ID Entry and Read
THREE-BYTE SEQUENCE FOR
CFI QUERY ENTRY
ADDRESS A
5555
2AAA
5555
14-0
CE#
OE#
WE#
T
T
IDA
WP
T
T
AA
WPH
DQ
XXAA
SW0
XX55
SW1
XX98
SW2
15-0
1117 F20.1
Note: X can be V or V , but no other value.
IL
IH
FIGURE 14: CFI Query Entry and Read
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
19
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
THREE-BYTE SEQUENCE FOR
SOFTWARE ID EXIT AND RESET
5555
2AAA
5555
ADDRESS A
DQ
14-0
XXAA
XX55
XXF0
15-0
T
IDA
CE#
OE#
T
WP
T
WHP
WE#
SW0
SW1
SW2
Note: X can be V or V , but no other value.
IL
IH
1117 F10.1
FIGURE 15: Software ID Exit/CFI Exit
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
20
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
V
IHT
V
V
INPUT
REFERENCE POINTS
OUTPUT
OT
IT
V
ILT
1117 F11.1
AC test inputs are driven at VIHT (0.9 VDD) for a logic “1” and VILT (0.1 VDD) for a logic “0”. Measurement reference points
for inputs and outputs are VIT (0.5 VDD) and VOT (0.5 VDD). Input rise and fall times (10% ↔ 90%) are <5 ns.
Note: VIT - VINPUT Test
V
V
V
OT - VOUTPUT Test
IHT - VINPUT HIGH Test
ILT - VINPUT LOW Test
FIGURE 16: AC Input/Output Reference Waveforms
TO TESTER
TO DUT
C
L
1117 F12.1
FIGURE 17: A Test Load Example
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
21
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Start
Load data: XXAAH
Address: 5555H
Load data: XX55H
Address: 2AAAH
Load data: XXA0H
Address: 5555H
Load Word
Address/Word
Data
Wait for end of
Program (T
Data# Polling
,
BP
bit, or Toggle bit
operation)
Program
Completed
Note: X can be V or V , but no other value.
IL IH
1117 F13.4
FIGURE 18: Word-Program Algorithm
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
22
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Toggle Bit
Data# Polling
Internal Timer
Program/Erase
Initiated
Program/Erase
Initiated
Program/Erase
Initiated
Read DQ
7
Read word
Wait T
,
BP
T
T
SCE, SE
or T
BE
Read same
word
Is DQ =
7
No
true data?
Program/Erase
Completed
Yes
No
Does DQ
match?
Program/Erase
Completed
6
Yes
Program/Erase
Completed
1117 F14.0
FIGURE 19: Wait Options
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
23
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
CFI Query Entry
Command Sequence
Software ID Entry
Command Sequence
Software ID Exit/CFI Exit
Command Sequence
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XXF0H
Address: XXH
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Wait T
IDA
Load data: XX98H
Address: 5555H
Load data: XX90H
Address: 5555H
Load data: XXF0H
Address: 5555H
Return to normal
operation
Wait T
Wait T
Wait T
IDA
IDA
IDA
Return to normal
operation
Read CFI data
Read Software ID
1117 F15.4
Note: X can be V or V , but no other value.
IL IH
FIGURE 20: Software ID/CFI Command Flowcharts
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
24
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Chip-Erase
Sector-Erase
Block-Erase
Command Sequence
Command Sequence
Command Sequence
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Load data: XX80H
Address: 5555H
Load data: XX80H
Address: 5555H
Load data: XX80H
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XXAAH
Address: 5555H
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Load data: XX55H
Address: 2AAAH
Load data: XX10H
Address: 5555H
Load data: XX30H
Load data: XX50H
Address: SA
Address: BA
X
X
Wait T
Wait T
Wait T
BE
SCE
SE
Chip erased
to FFFFH
Sector erased
to FFFFH
Block erased
to FFFFH
1117 F16.5
Note: X can be V or V , but no other value.
IL IH
FIGURE 21: Erase Command Sequence
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
25
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
PRODUCT ORDERING INFORMATION
SST 39 VF 200A
-
70
-
4C
-
B3K
E
XX XX XXXX - XXX
-
XX - XXX
X
Environmental Attribute
E1 = non-Pb
Package Modifier
K = 48 leads or balls
Q = 48 balls or bumps (66 possible positions)
Package Type
B3 = TFBGA (0.8mm pitch, 6mm x 8mm)
C1 = XFLGA (0.5mm pitch, 4mm x 6mm)
E = TSOP (type 1, die up, 12mm x 20mm)
M1 = WFBGA (0.5mm pitch, 4mm x 6mm)
Y1 = WFBGA (panel-based, 0.5mm pitch,
4mm x 6mm)”
Temperature Range
C = Commercial = 0°C to +70°C
I = Industrial = -40°C to +85°C
Minimum Endurance
4 = 10,000 cycles
Read Access Speed
45 = 45 ns
55 = 55 ns
70 = 70 ns
Version
A = Special Feature Version
Device Density
800 = 8 Mbit
400 = 4 Mbit
200 = 2 Mbit
Voltage
L = 3.0-3.6V
V = 2.7-3.6V
Product Series
39 = Multi-Purpose Flash
1. Environmental suffix “E” denotes non-Pb solder.
SST non-Pb solder devices are “RoHS Compliant”.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
26
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
Valid combinations for SST39LF200A
SST39LF200A-45-4C-EKE SST39LF200A-45-4C-B3KE
SST39LF200A-55-4C-EKE SST39LF200A-55-4C-B3KE
Valid combinations for SST39VF200A
SST39VF200A-70-4C-EKE SST39VF200A-70-4C-B3KE SST39VF200A-70-4C-M1QE SST39VF200A-70-4C-Y1QE
SST39VF200A-70-4I-EKE SST39VF200A-70-4I-B3KE SST39VF200A-70-4I-M1QE SST39VF200A-70-4I-Y1QE
Valid combinations for SST39LF400A
SST39LF400A-55-4C-EKE SST39LF400A-55-4C-B3KE
Valid combinations for SST39VF400A
SST39VF400A-70-4C-EKE SST39VF400A-70-4C-B3KE SST39VF400A-70-4C-C1QE SST39VF400A-70-4C-M1QE
SST39VF400A-70-4I-EKE SST39VF400A-70-4I-B3KE SST39VF400A-70-4I-C1QE SST39VF400A-70-4I-M1QE
Valid combinations for SST39LF800A
SST39LF800A-55-4C-EKE SST39LF800A-55-4C-B3KE
Valid combinations for SST39VF800A
SST39VF800A-70-4C-EKE SST39VF800A-70-4C-B3KE SST39VF800A-70-4C-C1QE SST39VF800A-70-4C-M1QE
SST39VF800A-70-4C-Y1QE
SST39VF800A-70-4I-EKE SST39VF800A-70-4I-B3KE SST39VF800A-70-4I-C1QE SST39VF800A-70-4I-M1QE
SST39VF800A-70-4I-Y1QE
Note: Valid combinations are those products in mass production or will be in mass production. Consult your SST sales
representative to confirm availability of valid combinations and to determine availability of new combinations.
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
27
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
PACKAGING DIAGRAMS
1.05
0.95
Pin # 1 Identifier
0.50
BSC
0.27
0.17
12.20
11.80
0.15
0.05
18.50
18.30
DETAIL
1.20
max.
0.70
0.50
20.20
19.80
0°- 5°
0.70
0.50
Note: 1. Complies with JEDEC publication 95 MO-142 DD dimensions,
although some dimensions may be more stringent.
2. All linear dimensions are in millimeters (max/min).
3. Coplanarity: 0.1 mm
1mm
48-tsop-EK-8
4. Maximum allowable mold flash is 0.15 mm at the package ends, and 0.25 mm between leads.
FIGURE 22: 48-Lead Thin Small Outline Package (TSOP) 12mm x 20mm
SST Package Code: EK
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
28
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TOP VIEW
8.00 0.20
BOTTOM VIEW
5.60
0.80
0.45 0.05
(48X)
6
5
4
3
2
1
6
5
4.00
4
3
6.00 0.20
2
1
0.80
A
B C D E F G H
H
G F E D C B A
A1 CORNER
A1 CORNER
1.10 0.10
SIDE VIEW
0.12
SEATING PLANE
1mm
0.35 0.05
Note:
1. Complies with JEDEC Publication 95, MO-210, variant 'AB-1', although some dimensions may be more stringent.
2. All linear dimensions are in millimeters.
3. Coplanarity: 0.12 mm
4. Ball opening size is 0.38 mm ( 0.05 mm)
48-tfbga-B3K-6x8-450mic-4
FIGURE 23: 48-Ball Thin-Profile, Fine-pitch Ball Grid Array (TFBGA) 6mm x 8mm
SST Package Code: B3K
TOP VIEW
BOTTOM VIEW
6.00
0.08
5.00
0.50
0.32
0.05
(48X)
6
5
4
3
2
1
6
5
4
3
2
1
4.00
0.08
2.50
0.50
A B C D E F G H J K L
L K J H G F E D C B A
A1 CORNER
A1 INDICATOR4
0.63 0.10
DETAIL
SIDE VIEW
0.08
SEATING PLANE
0.20
0.06
1mm
Note:
1. Complies with JEDEC Publication 95, MO-207, Variant C2B-4, dimensions except nominal ball width is larger.
2. All linear dimensions are in millimeters.
3. Coplanarity: 0.08 mm.
4. No ball is present in position A1; a gold-colored indicator is present.
5. Ball opening size is 0.29 mm ( 0.05 mm).
48-wfbga-M1Q-4x6-32mic-6.0
FIGURE 24: 48-Ball Very-Very-Thin-Profile, Fine-Pitch Ball Grid Array (WFBGA) 4mm x 6mm
SST Package Code: M1Q
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
29
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TOP VIEW
BOTTOM VIEW
6.00
0.08
5.00
0.29
0.05
0.50
(48X)
6
5
4
3
2
1
6
5
4
3
2
1
4.00
0.08
2.50
0.50
A B C D E F G H J K L
A1 CORNER
L K J H G F E D C B A
A1 INDICATOR4
0.52 max.
0.473 nom.
DETAIL
SIDE VIEW
0.05
SEATING PLANE
1mm
0.04
+0.025/-0.015
Note: 1. Complies with JEDEC Publication 95, MO-207, variant CZB-4, dimensions except bump height is much less.
2. All linear dimensions are in millimeters.
3. Coplanarity: 0.05 mm.
4. No ball is present at A1; a gold-colored indicator is present.
48-xflga-C1Q-4x6-29mic-6.0
5. Bump opening size is 0.29 ( 0.05 mm).
FIGURE 25: 48-Bump Extremely-Thin-Profile, Fine-Pitch Land Grid Array (XFLGA) 4mm x 6mm
SST Package Code: C1Q
TOP VIEW
BOTTOM VIEW
6.00
0.08
5.00
0.50
0.32
0.05
(48X)
6
5
4
3
2
1
6
5
4
3
2
1
4.00
0.08
2.50
0.50
A B C D E F G H J K L
L K J H G F E D C B A
A1 CORNER
A1 INDICATOR4
0.61 0.10
DETAIL
SIDE VIEW
0.08
SEATING PLANE
0.23 0.06
1mm
Note:
1. Complies with JEDEC Publication 95, MO-207, variant CZB-4, dimensions except nominal ball width
is larger.
2. All linear dimensions are in millimeters.
3. Coplanarity: 0.08 mm
4. No ball is present in position A1; a gold-colored indicator is present.
5. Ball width at interface to package body surface is 0.29 mm.
48-wfbga-Y1Q-4x6-320mic-5-2.0
FIGURE 26: 48-Ball Very-Very-Thin-Profile, Fine-Pitch Ball Grid Array (WFBGA) 4mm x 6mm (Panel-based)
SST Package Code: Y1Q
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
30
2 Mbit / 4 Mbit / 8 Mbit Multi-Purpose Flash
SST39LF200A / SST39LF400A / SST39LF800A
SST39VF200A / SST39VF400A / SST39VF800A
Data Sheet
TABLE 17: Revision History
Number
04
Description
Date
May 2002
Mar 2003
•
•
•
2002 Data Book
05
Added footnotes for MPF power usage and Typical conditions to Table 10 on page 12
Clarified the Test Conditions for Power Supply Current and Read parameters in Table
10 on page 12
•
•
•
•
•
•
•
•
•
Part number changes - see page 27 for additional information
New Micro-Package part numbers added for SST39VF400A and SST39VF800A
New Micro-Package part numbers added for SST39VF400A / 800A (see page 27)
2004 Data Book
06
07
Oct 2003
Nov 2003
Updated the B3K, M1Q, and C1Q package diagrams
Added non-Pb MPNs and removed footnote (see page 27)
Added M1Q/M1QE MPNs for the SSTVF200A device on page 27
Removed 90ns MPNs and footnote for the SSTVFx00A devices on page 27
Added RoHS compliance information on page 1 and in the “Product Ordering Informa-
tion” on page 26
08
Apr 2005
•
•
Clarified the solder temperature profile under “Absolute Maximum Stress Ratings” on
page 11.
09
10
Feb 2007
Aug 2007
Removed valid combinations SST39LF400A-45-4C-EK, SST39LF400A-45-4C-B3K,
SST39LF400A-45-4C-EKE, and SST39LF400A-45-4C-B3KE due to EOL
•
•
•
Applied new format styles.
Add Y1QE package
Removed all pb parts
Silicon Storage Technology, Inc. • 1171 Sonora Court • Sunnyvale, CA 94086 • Telephone 408-735-9110 • Fax 408-735-9036
www.SuperFlash.com or www.sst.com
©2007 Silicon Storage Technology, Inc.
S71117-10-000
08/07
31
相关型号:
SST39VF800A-90-4C-B3KE
Flash, 512KX16, 90ns, PBGA48, 6 X 8 MM, LEAD FREE, 0.80 MM PITCH, MO-210AB-1, TFBGA-48
SILICON
SST39VF800A-90-4C-EKE
512K X 16 FLASH 2.7V PROM, 90 ns, PDSO48, 12 X 20 MM, LEAD FREE, MO-142DD, TSOP1-48
MICROCHIP
SST39VF800A-90-4C-EKE
Flash, 512KX16, 90ns, PDSO48, 12 X 20 MM, LEAD FREE, MO-142DD, TSOP1-48
SILICON
SST39VF800A-90-4I-B3KE
512K X 16 FLASH 2.7V PROM, 90 ns, PBGA48, 6 X 8 MM, LEAD FREE, 0.80 MM PITCH, MO-210AB-1, TFBGA-48
MICROCHIP
SST39VF800A-90-4I-B3KE
Flash, 512KX16, 90ns, PBGA48, 6 X 8 MM, LEAD FREE, 0.80 MM PITCH, MO-210AB-1, TFBGA-48
SILICON
©2020 ICPDF网 联系我们和版权申明