SP6214EC5-2-85/TR [SIPEX]
Fixed Positive LDO Regulator, 2.85V, 0.5V Dropout, CMOS, PDSO5, MO-203AA, SC-70, 5 PIN;
| 型号： | SP6214EC5-2-85/TR |
| 厂家： | 
SIPEX CORPORATION |
| 描述： | Fixed Positive LDO Regulator, 2.85V, 0.5V Dropout, CMOS, PDSO5, MO-203AA, SC-70, 5 PIN 光电二极管 输出元件 调节器 |
| 文件： | 总10页 (文件大小：271K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
SP6213/SP6214
Micropower, SC-70, 100mA CMOS LDO Regulator
GND
NC*
EN
VIN
GND
EN
FEATURES
3
2
1
3
2
1
■
■
■
■
■
■
■
■
■
■
■
■
■
■
■
Tiny 5-pin SC-70 Package
Guaranteed 100 mA Output
2.5% Output Voltage Accuracy
Low Dropout Voltage: 250 mV at 100mA
Low Quiescent Current: 65 µA
Low Ground Current: 135 µA @ IL = 100mA
Low Shutdown Current: 1µA MAX
Current Limit: 190mA
Thermal Shutdown: 168°C
Good Load and Line Regulation
Fast Transient Response: TON/TOFF=80µs
Low Temperature Coefficient
Unconditionally Stable with 1µF Ceramic
Fixed Outputs: 1.8V, 2.5V, 2.7V, 2.85V, 3.0V, 3.3V, 5V
100mA Replacement for 80mA MIC5213 & TC1016
SP6213
SP6214
5 Pin SC70
5 Pin SC70
5
VIN
4
VOUT
5
VOUT
4
NC*
*connect to GND for enhanced
thermal performance
Now Available in Lead Free Packaging
APPLICATIONS
■
■
■
■
■
■
■
■
Digital Cordless Phones
Cellular Phones
PDAs
Digital Still Cameras
MP3 Players
Battery-Powered Equipment
Medical Devices
Data Cable
(SP6213)
■
100mA Replacement for 80mA NCP512 (SP6214)
DESCRIPTION
The SP6213/4 is a 100mA CMOS linear voltage regulator offered in an SC-70 package that reduces board space
requirements by 50% over a SOT-23 package. The SP6213/4 features low dropout voltage (250mV at 100mA ), low
ground current (135µA at full load) and low, 65µA quiescent current. Designed specifically for hand-held, battery
powered devices, the device includes an enable/shutdown pin. Regulator ground current increases only slightly in
dropout to extend battery life. The SP6213/4 is offered in an industry standard 5-pin SC-70 package. SP6213/4 is
available in 1.8V, 2.5V, 2.7V, 2.85V, 3.0V, 3.3V and 5.0V fixed output voltages.
FUNCTIONAL DIAGRAM
V
V
IN
OUT
1.25V
Enable
+
–
EN
Bandgap
Reference
Shutdown
Current Limit
& Thermal Shutdown
GND
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS (Note 1)
SupplyInputVoltage(VIN)...................................-2Vto7V
OutputVoltage(VOUT)...............................-0.6to(VIN +1V)
Enable Input Voltage (VEN).............................-2V to 7V
Power Dissipation (PD)............Internally Limited, Note 3
Lead Temperature (soldering 5s)..........................260°C
Storage Temperature............................-65˚C to +150˚C
(Note 1) These are stress ratings only and functional
operation of the device at these ratings or any other
above those indicated in the operation sections of the
specificationsbelowisnotimplied.Exposuretoabsolute
maximum rating conditions for extended periods of time
may affect reliability.
OPERATING RATINGS (Note 2)
Input Voltage (VIN)................................... +2.5V to +6V
Enable Input Voltage (VEN) ...................... ZeroV to +6V
Junction Temperature (TJ) ................. -40˚C to +125˚C
Thermal Resistance ................................... (Note 3)
SC-70-5 (θJA) .............................. 330°C/W
ELECTRICAL CHARACTERISTICS
VIN = VOUT +0.5V, IL = 100µA, CIN = 1µF, COUT = 1µF, TJ = 25°C , unless otherwise noted. The ♦ denotes the specifications which apply over the full
operating temperature range, unless otherwise specified.
♦
♦
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
Output Voltage Accuracy, (VOUT
)
-2.5
-4
2.5
4
Variation from specified VOUT
%
Output Voltage Temperature
60
ppm/
Coefficient, Note 4, (∆VOUT/∆T)
° C
Minimum Supply Voltage
2.50
2.55
2.75
2.70
2.85
3.00
IOUT = 100µA
V
IOUT = 50mA
IOUT = 100mA
♦
♦
♦
♦
♦
♦
♦
Line Regulation, (∆VOUT/ VIN)
0.05
0.05
0.4
0.2
0.2
0.8
0.8
4
VIN = (VOUT + 0.5V) to 6V
%/V
%/V
%
SP6213-1.8V Line Regulation
VIN = 2.8V to 6V
Load Regulation, Note 5, (∆VOUT
)
IL = 0.1mA to 100mA, VIN = VOUT +1V
IL = 0.1mA to 100mA, VIN = 3.0V
IL = 100µA
SP6213-1.8V Load Regulation
0.4
%
Dropout Voltage, Note 6, (VIN
–
VOUT
)
0.25
130
250
mV
mV
mV
250
500
IL = 50mA
IL = 100mA
♦
♦
Quiescent Current, (IGND
)
0.01
65
1
125
V
EN ≤ 0.4V (Shutdown)
µA
V
EN ≥ 1.6V (Operating), IL = 0µA
µA
µA
µA
♦
♦
♦
Ground Pin Current, Note 7, (IGND
)
65
125
175
250
VEN ≥ 1.6V, IL = 100µA
VEN ≥ 1.6V, IL = 50mA
VEN ≥ 1.6V, IL = 100mA
100
135
Power Supply Rejection Ratio,
(PSRR)
74
40
Frequency = 100Hz, IL = 10mA
Frequency = 400kHz, IL = 10mA
dB
mA
♦
Current Limit, (ICL
)
120
190
350
Thermal Limit
168
153
Turns On
Turns Off
° C
%/W
Thermal Regulation, (∆VOUT/∆PD),
0.05
Note 8
Output Noise (eNO
)
250
µVrms
IL=50mA, CL=1µF, 10Hz to 100kHz
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
2
ELECTRICAL CHARACTERISTICS
VIN = VOUT +0.5V, IL = 100µA, CIN = 1µF, COUT = 1µF, TJ = 25°C , unless otherwise noted. The ♦ denotes the specifications which apply over
the full operating temperature range, unless otherwise specified.
♦
PARAMETER
MIN
TYP
MAX
UNITS
CONDITIONS
ENABLE INPUT
♦
♦
♦
♦
Enable Input Logic-Low Voltage, (VIL)
Enable Input Logic-High Voltage, (VIH)
Enable Input Current, (IIL), (IIH)
0.4
V
Regulator Shutdown
Regulator Enabled
VIL < 0.4V
1.6
V
µA
µA
µs
0.01
0.01
80
1
1
VIH > 1.6V
Turn on Time (TON
)
165
IOUT=50mA
Turn off Time (TOFN
)
80
30
175
35
I
OUT=100µA
µs
IOUT=100mA
Note 1. Exceeding the absolute maximum rating may damage the device.
Note 2. The device is not guaranteed to function outside its operating rating.
Note 3. The maximum allowable power dissipation at any TA (ambient temperature) is PD (MAX) = (TJ (MAX)– TA) / θJA.
Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the
regulator will go into thermal shutdown. The θJA of the SP6213/4 (SC-70-5) is 330°C/W mounted on a PC
board with minimum copper area (see “Thermal Considerations” section for further details).
Note 4. Output voltage temperature coefficient is defined as the worst case voltage change divided by the total
temperature range.
Note 5. Load Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts
are tested for load regulation in the load range. Changes in output voltage due to heating effects are
covered by the thermal regulation specification.
Note 6. Dropout Voltage is defined as the input to output differential at which the output voltage drops 2% below
its nominal value measured at 0.5V differential. Not applicable to output voltages less than 2.7V.
Note 7. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum
of the load current plus the ground pin current.
Note 8. Thermal regulation is defined as the change in output voltage at a time ”t” after a change in power
dissipation is applied, excluding load or line regulation effects. Specifications are for a 100mA load pulse
at VIN = 6V for t = 10ms.
Note 9. Devices are ESD sensitive. Handling precautions are recommended.
PIN DESCRIPTION
PIN NUMBER
PIN NAME
VIN
SP6214 DESCRIPTION (FUNCTION)
Supply Input
1
2
3
4
5
GND
EN
Ground Connection
Enable / Shutdown (Logic high=enable; logic low = shutdown)
No Connection
NC
VOUT
Regulator Output
PIN NUMBER
PIN NAME
EN
SP6213 DESCRIPTION (FUNCTION)
Enable / Shutdown (Logic high=enable; logic low = shutdown)
No Connection
1
2
3
4
5
NC
GND
VOUT
Ground Connection
Regulator Output
VIN
Supply Input
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
3
THEORY OF OPERATION
General Overview
age, use the junction-to-ambient thermal re-
sistance of the device and the following basic
equation:
Enable/Shutdown Operation
The SP6213/4 is turned off by pulling the EN
pin low and turned on by pulling it high. If this
enable/shutdown feature is not required, EN
should be tied to VIN to keep the regulator
output on at all times.
PD = (TJ(max) - TA) / θJA
TJ(max) is the maximum junction temperature
of the die and is 125°C. TA is the ambient
operating temperature. θJA is the junction-to-
ambient thermal resistance for the regulator
and is layout dependent. The actual power
dissipation of the regulator circuit can be
determined using one simple equation:
PD = (VIN - VOUT)*IOUT + VIN*IGND
Input Capacitor
Any good quality ceramic or tantalum capaci-
tormaybeusedattheinput. Asmallcapacitor
ofabout1µFisrequiredfromVIN toGNDif, for
instance, a battery is used as the input.
Output Capacitor
Substituting PD(max) for PD and solving for the
operating conditions that are critical to the
application will give the maximum operating
conditions for the regulator circuit. For ex-
ample, if we are operating the SP6213/4 at
3.0V output at room temperature, with a mini-
mum footprint layout, we can determine the
maximum input voltage for a set output cur-
rent:
An output capacitor is required between VOUT
andGNDtopreventoscillation.Theminimum
size of the output capacitor is a 0.47 µF
ceramic.Thegivendatasheetvaluesrelateto
an IC with a ceramic output capacitor of 1µF.
Larger values make the IC more stable which
means an improvement of the regulator’s
transient response. For a lower output cur-
rent, the output capacitance can be chosen
smaller in order to have the same output
stability.
PD(max) = [(125°C -25°C) / (330°C/W)]
= 303 mW.
No Load Stability
To prevent the device from entering thermal
shutdown, maximum power dissipation can
not be exceeded. Using the output voltage of
3.0V and an output current of 100 mA, the
maximum input voltage can be determined.
Ground pin current can be taken from the
electrical specifications table (0.135 mA at
100 mA). The maximum input voltage is de-
termined as follows:
The SP6213/4 will remain stable and in regu-
lation with no external load (other than the
internalvoltagedriver)unlikemanyothervolt-
age regulators. This is especially important in
CMOS RAM keep-alive applications.
Thermal Considerations
The SP6213/4 is designed to provide 100 mA
of continuous current in a very tiny package.
Maximum power dissipation can be calcu-
lated based on the output current and the
voltage drop across the part. To determine
the maximum power dissipation of the pack-
303mW=(VIN –3.0V)*100mA+VIN*0.135mA
After calculations, we find that the maximum
input voltage of a 3.0V application at 100mA
of output current in an SC-70-5 package is
6.02V.
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
4
TYPICAL PERFORMANCE CHARACTERISTICS
27°C, VIN=4V, IL = 0.1mA, CIN = COUT = 1µF unless otherwise specified.
3.05
3.04
3.03
3.02
3.01
3
3.05
3.04
3.03
3.02
3.01
3
V
IN
V
IN
V
IN
=4V
VIN=4V
VIN=5.5V
VIN=7V
=5.5V
=7V
2.99
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Output Voltage vs. Temperature (IOUT = 0.1mA)
Output Voltage vs. Temperature (IOUT = 10mA)
3.04
3.03
3.04
VIN=4V
VIN=4
V
3.03
3.02
3.01
3
2.99
2.98
2.97
2.96
2.95
VIN=5.5V
VIN=7V
VIN=5.5V
VIN=7V
3.02
3.01
3
2.99
2.98
2.97
-50
0
50
100
150
-50
0
50
100
150
Temperature (°C)
Temperature (°C)
Output Voltage vs. Temperature (IOUT = 50mA)
Output Voltage vs. Temperature (IOUT = 100mA)
200
0.25
0.2
VIN=4V
VIN=5.5V
VIN=7V
150
100
ILOAD=10mA
ILOAD=50mA
0.15
0.1
0.05
0
ILOAD=100mA
50
0
-40 -20
0
20
40
60
80 100 120 140
-50
0
50
Temperature (°C)
100
150
Temperature (°C)
Quiescent Current vs. Temperature (IOUT = 0A)
Dropout Voltage vs. Temperature
Line Regulation at 27°C
3.045
3.040
3.035
3.030
3.025
3.045
IN=4V
Io=0.1mA
3.035
3.025
3.015
V
= 5.5V
Io=10mA
Io=50mA
Io=100mA
IN
V
= 7V
IN
0
20
40
60
80
100
3
4
5
6
7
Io (mA)
VIN (V)
Output Voltage vs. Output Current
Output Voltage vs. Input Voltage
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
5
TYPICAL PERFORMANCE CHARACTERISTICS
27°C, VIN=4V, IL = 0.1mA, CIN = COUT = 1µF unless otherwise specified.
100
80
60
40
20
0
6
5
4
3
2
1
0
200
150
VIN = 4V
EN = Vin
EN = 0V
100
50
0
VIN = 5.5V
VIN = 7V
0
1
2
3
4
5
6
7
0
25
50
75
100
VIN (V)
Io (mA)
Quiescent Current vs. Input Voltage
Ground Current vs. Output Current
250
200
150
100
50
175
150
125
100
75
Io=0.1mA
Io=10mA
Io=50mA
Io=100mA
50
25
0
0
0
25
50
75
100
3
4
5
6
7
Io (mA)
VIN (V)
Ground Current vs. Input Voltage
Dropout Voltage vs. Output Current
3V
2V
1V
0V
4V
2V
0V
VOUT
SP6213-3.0VOUT fixed
VEN is toggled, VIN=4VCTE
IOUT=100uA
C
IN=COUT=1uF Cer. Cap
VEN
Turn-on Characteristic (VIN = 4V, IOUT = 100µA)
Turn-on Characteristic (VIN = 4V, IOUT=100mA)
SP6213-3.0VOUT fixed
VOUT
3V
2V
1V
0V
4V
2V
0V
VEN
VIN=7VCTE
is toggled,
IOUT=100mA
CIN=COUT=1uF Cer. Cap
3V
2V
1V
0V
4V
2V
0V
VOUT
SP6213-3.0VOUT fixed
VEN
VIN=7VCTE
is toggled,
IOUT=100uA
CIN=COUT=1uF Cer. Cap
VEN
VEN
Turn on Time (VIN = 7V, IOUT = 100mA)
Turn-on Characteristic (VIN = 7V, IOUT = 100µA)
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
6
TYPICAL PERFORMANCE CHARACTERISTICS
27°C, VIN=4V, IL = 0.1mA, CIN = COUT = 1µF unless otherwise specified.
VOUT
3V
2V
1V
0V
4V
2V
0V
SP6213-3.0VOUT fixed
VEN VIN=4VCTE
is toggled,
IOUT=100uA
IN=COUT=1uF Cer. Cap
C
VEN
Turn off Time (VIN=4V, IOUT=100µA)
Turn off Time (VIN = 4V, IOUT = 100mA)
VOUT
VOUT
3V
3V
2V
1V
0V
4V
2V
0V
SP6213-3.0VOUT fixed
2V
1V
0V
4V
2V
0V
VEN
VIN=7VCTE
SP6213-3.0VOUT fixed
is toggled,
IOUT=100uA
CIN=COUT=1uF Cer. Cap
VEN
VIN=7VCTE
is toggled,
IOUT=100mA
IN=COUT=1uF Cer. Cap
C
VEN
VEN
Turn off Time (VIN = 7V, IOUT = 100µA)
Turn off Time (VIN = 7V, IOUT = 100mA)
SP6213-3.0VOUT fixed
200mA
SP6213-3.0VOUT fixed
VEN IN=4VCTE
200mA
VEN
VIN=4VCTE
V
is toggled,
IOUT=100uA
CIN=COUT=1uF Cer. Cap
is toggled,
IOUT=100mA
IN=COUT=1uF Cer. Cap
200mA
0mA
3V
IIN
200mA
IIN
C
0mA
3V
2V
0V
4V
2V
0V
VOUT
VOUT
2V
0V
VEN
VEN
4V
2V
0V
In-Rush Current (VIN = 4V, IOUT = 100mA)
(VIN = 4V, IOUT = 100µA)
SP6213-3.0VOUT fixed
VIN=4VCTE
CIN=COUT=1uF Cer. Cap
TR=TF=100ns
SP6213-3.0VOUT fixed
VIN=4VCTE
CIN=COUT=1uF Cer. Cap
TR=TF=100ns
20mV
20mV
10mV
0mV
10mV
0mV
VOUT
VOUT
-10mV
-10mV
100uA
IOUT
100uA
IOUT
100mA
0mA
100mA
0mA
Load Transient Response (VIN = 4V)
Load Transient Response (VIN = 4V)
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
7
TYPICAL PERFORMANCE CHARACTERISTICS
27°C, VIN=4V, IL = 0.1mA, CIN = COUT = 1µF unless otherwise specified.
SP6213-3.0VOUT fixed
VIN=7VCTE
CIN=COUT=1uF Cer. Cap
SP6213-3.0VOUT fixed
VIN=7VCTE
CIN=COUT=1uF Cer. Cap
20mV
10mV
0mV
20mV
10mV
0mV
TR=TF=100ns
TR=TF=100ns
VOUT
VOUT
-10mV
-10mV
100uA
IOUT
100uA
IOUT
100mA
0mA
100mA
0mA
Load Transient Response (VIN = 7V)
Load Transient Response (VIN = 7V)
Line Transient Response
VIN
VIN
5V
5V
4V
4V
5mV
0mV
-5mV
-10mV
5mV
0mV
-5mV
-10mV
VOUT
VOUT
SP6213-3.0VOUT fixed
I
OUT=10mA
COUT=1uF Cer. Cap
SP6213-3.0VOUT fixed
IOUT=100uA
C
OUT=1uF Cer. Cap
Line Transient Response (VIN=4V, IOUT=10mA)
Line Transient Response (VIN=4V, IOUT=100µA)
Line Transient Response (VIN=7V, IOUT=10µA)
Line Transient Response (VIN=7V, IOUT=100µA)
0
-20
10mA
50mA
-40
-60
-80
-100
10
100
1000
10000
100000
1000000
Frequency (Hz)
Power Supply Rejection Ratio, VO=3V
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
8
PACKAGE: 5 PIN SC-70
D
D/2
e1
SIDE VIEW
A2
5
4
E/2
E1/2
A
E
E1
Seating
Plane
A1
2
3
1
(L1)
Pin1 Designator
to be within this
INDEX AREA
(D/2 x E1/2)
e
b
TOP VIEW
ø1
FRONT VIEW
Gauge Plane
R1
R
L2
ø1
c
Seating
Plane
ø
L
5 Pin SC-70
JEDEC MO-203
Variation AA
Dimensions in Inches
Conversion Factor:
1 Inch = 25.40 mm
Dimensions in Millimeters:
Controlling Dimension
SYMBOL
MIN
-
NOM
-
MAX
1.10
0.10
1.00
0.22
MIN
-
0.000
0.028
0.004
NOM
-
-
0.036
-
MAX
0.043
0.004
0.039
0.009
A
A1
A2
c
0.00
0.70
0.08
-
0.90
-
D
2.00 BSC
0.079 BSC
E
2.10 BSC
0.083 BSC
E1
L
1.25 BSC
0.049 BSC
0.014
0.011
0.018
0.26
0.36
0.46
L1
L2
R
R1
Ø
0.42 REF
0.017 REF
0.15 BSC
0.006 BSC
-
-
4º
0.10
0.10
0˚
-
-
4º
-
0.004
0.004
0˚
-
0.25
8º
0.010
8º
Ø1
4˚
0.15
-
-
12º
0.30
4˚
0.006
-
-
12º
0.012
b
e
e1
0.65 BSC
1.30 BSC
0.026 BSC
0.051 BSC
SIPEX Pkg Signoff Date/Rev:
JL Oct3-05 / Rev A
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
9
ORDERING INFORMATION
Top
Marking
Temperature Voltage Package
Part Number
Range
Option
Type
SP6213EC5-1-8
SP6213EC5-1-8/TR
SP6213EC5-2-5
SP6213EC5-2-5/TR
SP6213EC5-2-7
SP6213EC5-2-7/TR
SP6213EC5-2-85
SP6213EC5-2-85/TR
SP6213EC5-3-0
SP6213EC5-3-0/TR
SP6213EC5-3-3
SP6213EC5-3-3/TR
SP6213EC5-5-0
W00
W00
F00
F00
E00
E00
D00
D00
A00
A00
C00
C00
B00
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
1.8V
1.8V
2.5V
2.5V
2.7V
2.7V
2.85V
2.85V
3.0V
3.0V
3.3V
3.3V
5.0V
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
SP6213EC5-5-0/TR
B00
-40°C to +125°C
5.0V
5 Pin SC-70
SP6214EC5-1-8
SP6214EC5-1-8/TR
SP6214EC5-2-5
SP6214EC5-2-5/TR
SP6214EC5-2-7
SP6214EC5-2-7/TR
SP6214EC5-2-85
SP6214EC5-2-85/TR
SP6214EC5-3-0
SP6214EC5-3-0/TR
SP6214EC5-3-3
D01
D01
J01
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
-40°C to +125°C
1.8V
1.8V
2.5V
2.5V
2.7V
2.7V
2.85V
2.85V
3.0V
3.0V
3.3V
3.3V
5.0V
5.0V
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
5 Pin SC-70
J01
K01
K01
L01
L01
M01
M01
H01
H01
N01
N01
SP6214EC5-3-3/TR
SP6214EC5-5-0
SP6214EC5-5-0/TR
Available in lead free packaging. To order add "-L" suffix to part number.
Example: SP6214EC5-3-3/TR = standard; SP6214EC5-L-3-3/TR = lead free.
Pack quantity is 3000 for SC70-5.
Lead Free packaging can be identified by a Bar “|” to the left of the standard Top Marking.
Corporation
ANALOGEXCELLENCE
Sipex Corporation
Headquarters and
Sales Office
233 South Hillview Drive
Milpitas, CA 95035
TEL: (408) 934-7500
FAX: (408) 935-7600
Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Date: 12/13/05
SP6213, SP6214 Micropower, SC-70, 100mA CMOS LDO Regulator
© Copyright 2005 Sipex Corporation
10
相关型号：
SP6214EC5-2.5
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-2.5/TR
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-2.7
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-2.7/TR
Fixed Positive LDO Regulator, 2.7V, 0.5V Dropout, CMOS, PDSO5, MO-203AA, SC-70, 5 PINWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-2.85
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-2.85/TR
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-3-0
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EXAR
SP6214EC5-3-0/TR
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EXAR
SP6214EC5-3-3
Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, CMOS, PDSO5, MO-203AA, SC-70, 5 PINWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
SP6214EC5-3-3
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EXAR
SP6214EC5-3-3/TR
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
EXAR
SP6214EC5-3.0
Micropower, SC-70, 100mA CMOS LDO RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SIPEX
©2020 ICPDF网 联系我们和版权申明