SP8110 [SIPEX]
Two-Channel Modulation IC for Laser Diode; 双信道调制IC,适用于激光二极管型号: | SP8110 |
厂家: | SIPEX CORPORATION |
描述: | Two-Channel Modulation IC for Laser Diode |
文件: | 总3页 (文件大小:111K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Advance
SP8110
Two-Channel Modulation IC for Laser Diode
FEATURES
•
•
5V Single supply voltage
Two output channels, suitable for different
wavelength laser diodes
IA
IB
Rf
Vcc-out
LD_A
GND
1
2
3
4
8
7
6
5
•
•
Oscillator frequency is adjustable in both
channels simultaneously
Oscillator amplitude is adjustable for each
output separately up to 130mA
Operates two grounded laser diodes
Small DFN 2 x 3mm package
SP8110
Vcc
LD_B
•
•
APPLICATION
DVD-ROM or DVD-Video applications utilizing twin laser diodes
•
GENERAL DESCRIPTION
The SP8110 is a Two-Channel Modulation IC utilizing high frequency current to suppress the
noise of grounded laser diodes. Modulation frequency is adjusted in both channels
simultaneously by an external resistor Rf tied to the ground. The amplitude of the high
frequency current is set for each channel separately by a DC input current applied to the
appropriate input pin (IA or IB for Laser A or Laser B, respectively). Current gain from input to
output is 100mA/mA (typical).
The input current at pins IA and IB is monitored to determine which channel is active. In the
event input current in both channels is below the active threshold level (approximately 2.65mA),
the SP8110 will enter Power Save mode. In the event a valid input current above the active
threshold level is present on both inputs, an Error mode is assumed and the outputs of both
channels are disabled. Supply current levels in Power Save and Error modes are below 0.2 and
0.8 mA respectively (maximum values).
The SP8110 is manufactured in 0.5/0.6 µm CMOS technology.
Rev 0.1 (12-03-03): SP8110 – Two-Channel Modulation IC
SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-978-667-8700.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE
OR COPY
page 1 of 3
Advance
SP8110
INPUT CHARACTERISTICS: IA/IB INPUT CURRENT VS INPUT VOLTAGE
MODE SELECTION
IA current
> 2.65 mA
< 2.5 mA
> 2.65 mA
< 2.5 mA
IB current
< 2.5 mA
> 2.65 mA
> 2.65 mA
< 2.5 mA
Mode
LD_A output active
LD_B output active
Error
Power Save
PIN ASSIGNMENTS
Pin No.
Pin Name
Function
1
2
3
IA
IB
Amplitude setting for output LD_A
Amplitude setting for output LD_B
RFreq
Modulation Frequency adjusting pin
(An external resistor is connected between this pin and ground.)
Power supply pin
4
5
Vcc
LD_B
Output pin of channel B
(Anode of laser diode is connected with this pin.)
Ground pin
6
7
GND
LD_A
Output pin of channel A
(Anode of laser diode is connected with this pin.)
Power supply for LD_A and LD_B outputs
8
Vcc_out
BOARD LAYOUT AND GROUNDING
To obtain the best performance from the SP8110, a printed circuit board with ground plane is
required. High quality, low series resistance ceramic 0.1uF bypass capacitors should be used at
the Vcc and Vcc_out pins (pins 4 and 8). Pin 8 should also have a 0.1uF bypass capacitor.
These capacitors must be located as close to the pins as possible. The traces connecting the
pins and the bypassing capacitors must be kept short and should be made as wide as possible.
Rev 0.1 (12-03-03): SP8110 – Two-Channel Modulation IC
SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-978-667-8700.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE
OR COPY
page 2 of 3
Advance
SP8110
DFN 8-PIN PACKAGE DIMENSIONS
ORDERING INFORMATION
Part number
Temperature range
Package Type
SP8110ER
-40 to + 850C
DFN 2 x 3 mm 8-pin
Rev 0.1 (12-03-03): SP8110 – Two-Channel Modulation IC
SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-978-667-8700.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE
OR COPY
page 3 of 3
相关型号:
SP8120AP
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDIP32, 0.600 INCH, PLASTIC, DIP-32
SIPEX
SP8120BP
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDIP32, 0.600 INCH, PLASTIC, DIP-32
SIPEX
SP8120JP
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDIP32, 0.600 INCH, PLASTIC, DIP-32
SIPEX
SP8120JQ
ADC, Successive Approximation, 12-Bit, 1 Func, Parallel, Word Access, CDIP32, CERDIP-32
SPECTRUM
SP8120JS
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDSO32, 0.300 INCH, SOIC-32
SIPEX
SP8120KP
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDIP32, 0.600 INCH, PLASTIC, DIP-32
SIPEX
SP8120KQ
ADC, Successive Approximation, 12-Bit, 1 Func, Parallel, Word Access, CDIP32, CERDIP-32
SPECTRUM
SP8120KS
ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Parallel, Word Access, PDSO32, 0.300 INCH, SOIC-32
SIPEX
SP8120SQ/883
ADC, Successive Approximation, 12-Bit, 1 Func, Parallel, Word Access, CDIP32, CERDIP-32
SPECTRUM
SP8120SQ/883
ADC, Successive Approximation, 12-Bit, 1 Func, Parallel, Word Access, CDIP32, CERDIP-32
SIPEX
©2020 ICPDF网 联系我们和版权申明