SPX1582_06 [SIPEX]
3A Ultra Low Dropout Voltage Regulator; 3A超低压差稳压器型号: | SPX1582_06 |
厂家: | SIPEX CORPORATION |
描述: | 3A Ultra Low Dropout Voltage Regulator |
文件: | 总7页 (文件大小:205K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPX1582
3A Ultra Low Dropout Voltage Regulator
Fast Response, Adjustable & Fixed
FEATURES
■Low Dropout Voltage 500mV at 3A Full Load Current
■Adjustable Ouput Down to 1.25V from ATX Power Supply
■Fixed Output Voltages of 3.3V and 2.5V
SPX1582
5 Pin TO-263
SPX1582
1
2 3 4 5
5 Pin TO-220
4
5
1
2
3
■Extremely Tight Load and Line Regulation
■Standard 5-Terminal Low Cost TO-220 and TO-263
APPLICATIONS
■3.3V to 2.8V ATX Power Supplies
■3.3V to 2.9V for Portable PENTIUMTM Processor
■5V to 3.5V VRE Supply
■High efficiency "Green" Computer Systems
Now Available in Lead Free Packaging
DESCRIPTION
The SPX1582 is a 3A Low Dropout Regulator with extremely low dropout voltage. The adjustable version requires only
two external resistors to set the output voltage. The fixed version has a preset output of 3.3V, 2.8V or 2.5V and does
not require any external resistors. The SPX1582 features a low dropout of 400mV(Typ.) and offers fast transient
response. This device is suitable for Pentium applications requiring 2.8V, 2.5V from 3.3V ATX power supplies, where
low current input voltage 1V greater than the output voltage is needed. With an external sense pin the load regulation
is less than 1mV. This device is an excellent choice for the use in powering low voltage microprocessors that require
alowerdropout,fasttransientresponsetoregulatefrom3.3Vand5Vsupplies.TheSPX1582isalsoanexcellentchoice
as a post regulator for switching supply applications.
The SPX1582 offers protection against over-current faults, reversed input polarity, over temperature operation and
positive or negative transient voltages.
The SPX1582 is offered in a 5 pin TO-220 and TO-263 compatible with industry standard 5-terminal regulators. For
5A, 3A and 1.5A ultra low dropout versions refer to SPX1581, SPX1582 and SPX1583 data sheets respectively.
TYPICAL APPLICATIONS CIRCUIT
VIN
VOUT
2.5V
3.3V
VIN
5
4
3
VOUT
VIN
VOUT
2.5V
3.3V
VIN
SPX1582
C1
330μF
5
4
3
VOUT
SPX1582
C1
5V
1
330μF
VCTRL
2
5V
VCTRL
1
SENSE
VCTRL
2
VCTRL
SENSE
R1
ADJ
124Ω
GND
C4
2x330μF
C2
C4
C2
2x330μF
10μF
10μF
C3
R2
.033μF
124Ω
(1) VCTRL needed when VIN < 5V.
(1) VCTRL needed when VIN < 5V.
(2) VOUT = VREF (1+R2/R1)+IADJ R2.
(3) VREF is measured across adjust to sense.
Adjustable Regulator
Typical Fixed Regulator
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
VCTRL Input Voltage ....................................................... 13V
Power Dissipation ..................................... Internally Limited
Storage Temperature Range ..................... -65°C to +150°C
Operating Junction Temperature Range
SPX1582 Control Section ............................. 0°C to +125°C
SPX1582 Power Transistor .......................... 0°C to +150°C
Input Supply Voltage ................................................ 6V
ELECTRICAL CHARACTERISTICS
Electrical characteristics at VOUT = VSENSE, VADJ = 0V, TA=25°C, CCTL = CPWR = COUT = 33μF tantalum cap unless
otherwise specified. The ♦ denotes the specifications which apply over full temperature range -40°C to +85°C, unless
otherwise specified.
PARAMETER
2.5V Version
Output Voltage
MIN
TYP MAX UNITS
CONDITIONS
2.450
2.400
2.5
2.8
2.550
2.600
V
V
V
VCTRL = 6.0V to 12V, VIN = 3.0V to 5.0V, IO =10mA
♦ꢀ IO = 10mA to 3A
2.8V Version
Output Voltage
2.744
2.688
2.856
2.912
VCTRL = 6.3V to 12V, VIN =3.3V + 0.8V, IO=10mA
♦ꢀ IO = 10mA to 3A
3.3V Version
Output Voltage
3.234
3.168
3.3
3.3
3.366
3.432
VCTRL = 6.3V to 12V, VIN = 3.3V + 0.8V, IO=10mA
♦ꢀ IO = 10mA to 3A
All Voltage Options
Reference Voltage
1.238 1.25 1.263
V
VCTRL = 2.75V, VIN = 2.00V, IO = 10mA
VCTRL=2.7V to 12V,VIN = 2.05V to 5.5V,IO=10mA to 7A
VCTRL = 2.5V to 12V, VIN = 1.75 to 5.5V, IO=10mA
♦ꢀ VADJ = 0V
Line Regulation
mV
mV
1.0
1.0
3.0
5.0
Load Regulation (Note 1)
♦ꢀ VCTRL = 2.75V, VIN = VOUT + 1.5V, IO=10mA to 3A, VADJ =
0V
Dropout Voltage Min. VCTRL
(Note 2) (VIN - VOUT
Dropout Voltage Min. VIN
1.05
0.40
1.18
0.50
V
V
VADJ = 0V
VIN = 2.05V, IO = 1A
VADJ = 0V
)
(Note 2) (VIN - VOUT
)
VIN = 2.75V, IO = 3A
Current Limit
Minimum Load Current
3.1
60
A
mA
VCTRL = 2.75V, VIN = 2.05V, Δ VOUT = 100mV, VADJ = 0V
♦ꢀ VCTRL = 5V, VIN=3.3V, VADJ=0V
5
10
Thermal Regulation
Ripple Rejection
0.002 0.02
80
%/W
dB
30ms Pulse
VCTRL = 3.75V, VIN = 3.75V, IO = 2.3A, VADJ=0V
TJ=25, VRIPPLE=1Vpp at 120Hz
♦ꢀ VADJ = 0V
VCTRL = 2.75V, VIN = 2.05V, IO = 3A
VCTRL = 2.75V, VIN = 2.05V, VADJ=0V, IO = 10mA
♦
Control Pin Current
60
50
120
mA
Adjustble Pin Current
μA
120
3
29.3
3
Thermal Resistance
TO-220-5
Thermal Resistance
TO-263-5
°C/W
°C/W
°C/W
°C/W
Junction to Case (θ )
JC
Junction to Ambient (θ
)
)
JA
Junction to Case (θ )
JC
31.2
Junction to Ambient (θ
JA
Note 1: Low duty cycle pulse testing with Kelvin connections is required to order to maintain accurate data.
Note 2: Dropout voltage is defined as the minimum differential between VIN and VOUT or VCTRL and VOUT required to
maintain regulation at VOUT 95% Nominal VOUT
.
Note 3: VREF is measured across Adjust pin to Sense pin.
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
2
PIN DESCRIPTION
PIN NUMBER
PIN NAME
DESCRIPTION
1
SENSE
Allows Kelvin sense of VOUT at the load. (Positive side of the
reference voltage of the device).
2
ADJ
Negative side of the reference voltage for the device. Adding a small
bypass capacitor from the ADJ pin to ground will improve the transient
response.
3
4
VOUT
VCTRL
Power output of the device.
Supply pin for the control circuitry of the device. The current flow into this
pin will be about 1% of the output current. VCTRL must be between 1.0V
and 1.3V greater than the output voltage for the device to regulate.
5
VIN
Output load current is supplied through this pin. VIN must be between 0.1V
and 0.8V greater than the output voltage for this device to regulate.
Note that TAB is internally connected to Pin 3.
FUNCTIONAL DIAGRAM
(4) VCTRL
VIN (5)
LIMIT
CURRENT
LIMIT
AMPLIFIER
VOUT (3)
SENSE
THERMAL OVERLOAD
SENSE (1)
ADJ (2)
VOLTAGE
REGULATION
AMPLIFIER
VREF
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
3
APPLICATION INFORMATION
The SPX1582 is designed as a high performance
and low cost solution for applications requiring
a lower dropout than traditional NPN regulators.
Adjustable Regulator Design
1.25V reference voltage is being developed be-
tween the SENSE pin and the ADJ pin of the
SPX1582.Addingtwoexternalresistors(seefig
1.) will allow setting the output voltage from
1.25V to 6V. R1 is chosen so that this current is
specified at a minimum load current of 10mA.
R2 is given by the formula:
TheSPX1582usesaseparateinputvoltageVCTRL
( VCTRL ≥ VOUT + 1.3V) to minimize the dropout
voltage. This allows the 2.5V power for the load
to come from a 3.3V system supply. As an added
benefitthiswillreducethe heatdissipation*, and
lower heatsink and cooling fan costs.
VOUT = VREF (1+ R2/R1) + IADJ (R2).
The SPX1582 can power the 2.5V core voltage
ThecurrentflowingfromtheADJpinistypicaly
50μA. This ADJ pin contributes to the final
VOUT but is usually neglected. Connecting the
sense pin to the top of the resistor divider will
improve load regulation.
TM
for microprocessors such as a PentiumPC
,
TM
TM
TM
P55C , AMD5k86 and K6 and the IBM
TM
PowerPC 603EV and 604EV processors.
Atypicalapplicationwoulduse3.3VforVIN and
5.0V for VCTRL from a motherboard power sup-
ply to provide a nominal 2.5V output. Using the
sense pin provides a Kelvin measurement of
output for reducing resistance-associated errors.
Lowering Noise
For the fixed voltage device, adding a capacitor
at the GND pin will improve transient response.
This capacitor is chosen in the range of 1μF to
0.1μF and will depend on the amount of output
capacitance in the system.
Power Up Sequencing
The SPX1582 requires a power up sequence in
thatVIN must beappliedbeforeVCTRL toprevent
a latchup condition. If this is not possible, then a
10Ω series resistor should be added to the VCTRL
input to prevent the device from entering into
latchup if VCTRL is applied before VIN.
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
4
PACKAGE: 5 Pin TO-220
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
5
PACKAGE: 5 Pin TO-263
Seating
Plane
E
A
E/2
C2
L1
Chamfer
Optional
H
D
1
4
3
5
2
c
SIDE VIEW
See Detail C
e
b
FRONT VIEW
Gauge Plane
Seating
Plane
θ
L3
DETAIL C
A1
L
Thermal
Pad
BACK VIEW
5 Pin TO-263 JEDEC TO-263
Variation BA
(L1)
Dimensions in Millimeters
Conversion Factor:
1 Inch = 25.40 mm
Dimensions in Inches:
Controlling Dimension
SYMBOL
MIN
NOM
-
-
-
-
-
-
-
MAX
0.190
0.010
0.039
0.029
0.065
0.380
-
MIN
4.06
0.00
0.51
0.38
1.14
8.38
6.86
9.65
6.22
NOM
-
-
-
-
-
-
-
MAX
4.83
0.25
0.99
0.74
1.65
9.65
-
D1
A
A1
b
c
c2
D
D1
E
E1
e
0.160
0.000
0.020
0.015
0.045
0.330
0.270
0.380
0.245
-
-
0.420
-
-
-
10.67
-
.067 BSC
1.702 BSC
H
L
L1
L3
O
0.575
0.070
-
-
-
-
0.625
0.110
0.066
14.61
1.78
-
-
-
-
15.88
2.79
1.68
.010 BSC
-
0.254 BSC
-
0˚
8˚
0˚
8˚
SIPEX Pkg Signoff Date/Rev:
JL Jun12-06 / Rev B
E1
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
6
ORDERING INFORMATION
Output Voltage Packages
Part Number
Accuracy
SPX1582U5 ............................... 2.0%............................. Adj.......................... 5-Pin TO-220
SPX1582U5-2-5 ......................... 2.0%............................ 2.5V ........................ 5-Pin TO-220
SPX1582U5-2-8 ......................... 2.0%............................ 2.8V ........................ 5-Pin TO-220
SPX1582U5-3-3 ......................... 2.0%............................ 3.3V ........................ 5-Pin TO-220
SPX1582T5 ................................ 2.0%............................. Adj.......................... 5-Pin TO-263
SPX1582T5/TR .......................... 2.0%............................. Adj.......................... 5-Pin TO-263
SPX1582T5-1-5 ......................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-1-5/TR.................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-1-8 ......................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-1-8/TR.................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-2-5 ......................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-2-5/TR.................... 2.0%............................ 2.5V ........................ 5-Pin TO-263
SPX1582T5-2-8 ......................... 2.0%............................ 2.8V ........................ 5-Pin TO-263
SPX1582T5-2-8/TR.................... 2.0%............................ 2.8V ........................ 5-Pin TO-263
SPX1582T5-3-3 ......................... 2.0%............................ 3.3V ........................ 5-Pin TO-263
SPX1582T5-3-3/TR.................... 2.0%............................ 3.3V ........................ 5-Pin TO-263
Available in lead free packaging. To order add "-L" suffix to part number.
Example: SPX1582T5-3-3/TR = standard; SPX1582T5-L-3-3/TR = lead free.
/TR = Tape and Reel
Pack quantity is 500 for TO-263.
Sipex Corporation
Headquarters and
Sales Office
233 South Hillview Drive
Milpitas, CA 95035
TEL: (408) 934-7500
FAX: (408) 935-7600
Sipex Corporation reserves the right to make changes to any products described herein. Sipex does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others.
Jun 17-06 Rev F
SPX1582 3A Ultra Low Dropout Voltage Regulator
© 2006 Sipex Corporation
7
相关型号:
©2020 ICPDF网 联系我们和版权申明