SC00120912 [SKYWORKS]

MIS Chip Capacitors; MIS贴片电容


型号：	SC00120912
厂家：	SKYWORKS SOLUTIONS INC.
描述：	MIS Chip Capacitors MIS贴片电容
文件：	总3页 (文件大小：65K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DATA SHEET

SC Series: MIS Chip Capacitors

Features

●

Readily available from stock

●

High reliability silicon oxide–nitride dielectric

●

Low loss—typically 0.04 dB in a 50 Ω system

Operation through 26 GHz

●

Wide temperature operation

●

Available lead (Pb)-free, RoHS-compliant, and Green

Electrical Specifications

Capacitance range 0.8 to 1000 pF

Description

Skyworks MIS Chip Capacitors are available in a wide range of

sizes and capacitance values. They are frequently used in

applications requiring DC blocking, RF bypassing, or as a fixed

capacitance tuning element in filters, oscillators, and matching

networks. The devices have a dielectric composed of thermally

grown silicon dioxide over which a layer of silicon nitride is

deposited. This dielectric possesses a low temperature coefficient

of capacitance and very high insulation resistance. The devices

also exhibit excellent long-term stability making them suitable for

high-reliability applications. The capacitors have a high dielectric

breakdown which permits the use of thin dielectrics resulting in

large capacitance per unit area. The temperature coefficient is

less that 50 ppm/°C, and operation is suitable from -65 °C to

200 °C. Compared to ceramic capacitors, Skyworks MIS chip

capacitors offer higher Q, and a lower insertion loss of 0.04 dB,

in a 50 Ω system. Insulation resistance is greater than

Temperature coefficient: 50 ppm/°C typical

Capacitance tolerance 20%

Operating temperature: -65 °C to +200 °C

Dielectric withstanding voltage: 100 V

Insulation resistance: 10 megohms typical

Leakage current: typ. < 1 nA

Absolute Maximum Ratings

Characteristic

Value

Operating temperature range (T

)

-65 °C to +200 °C

100 V

Storage temperature range (T

)

STG

Dielectric withstanding voltage

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

10 M Ω. To accommodate high-volume automated assembly

methods, wafers can be supplied on expanded film frame. To

reduce cost, chips can be supplied packaged in vials with

sample testing only. Packaging in waffle packs with 100%

electrical test and visual inspection is available.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

Skyworks Green products are lead (Pb)-free, RoHS

(Restriction of Hazardous Substances)-compliant,

conform to the EIA/EICTA/JEITA Joint Industry Guide

(JIG) Level A guidelines, and are free from antimony

trioxide and brominated flame retardants.

NEW

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200136 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 2, 2006

DATA SHEET • SC SERIES

Typical SPDT Switch

Electrical Specifications

Bias

Capacitance

Chip Dimensions

(1 mil)

Part Number

SC00080912

SC00120912

SC00180912

SC00260912

SC00380912

SC00560912

SC00680912

SC00820710

SC00821518

SC01000710

SC01000912

SC01001518

SC01501518

SC02201518

SC03301518

SC04701518

SC06801518

SC10002430

SC33303440

SC50004450

SC99906068

(20%) pF

0.8

1.2

1.8

2.6

3.8

5.6

6.8

8.2

Output

9 mil pad/12 mil chip

7 mil pad/10 mil chip

15 mil pad/18 mil chip

7 mil pad/10 mil chip

9 mil pad/12 mil chip

15 mil pad/18 mil chip

24 mil pad/30 mil chip

34 mil pad/40 mil chip

44 mil pad/50 mil chip

60 mil pad/68 mil chip

C₂

C₃

Input 1

Input 2

C₁

D₁

D₂

C₄

C₂, C₃— Chip MIS capacitor

C₁, C₄— Chip or beam-lead MIS capacitor

D₁, D₂DSG9500 beam-lead PIN diode

Example

Part Number Structure — SCXXXXYYZZ

where:

SC = Silicon Capacitor

100

333

500

1000

XXXX = Capacitance (pF)

YY = Square Contact Size (mils)

ZZ = Square Chip Size (mils)

10.0

1.0

1 pF

0.001ꢀ

8.2 pF

100 pF

0.10

0.01

47 pF

0.001ꢀ

1–47 pF

100 pF

0.005

0.001ꢀ

Chip Thickness

Frequency (GHz)

Figure 1. Typical Insertion

Loss vs. Frequency (50 Ω System)

Performance Data

Tests on typical MIS capacitors at L and S band show insertion

loss to be 1/2 to 1/3 that of equivalent ceramic-type capacitors,

without any of the associated resonance problems. Power tests

indicate that the only limitation is the actual breakdown voltage

of the device (see data section). A typical insertion loss versus

frequency graph is shown in Figure 1. This data is taken from

an actual test circuit with series mounted beam-lead or chip

capacitors on a 50 Ω microstrip transmission line. The apparent

higher loss at lower frequencies on the lower capacitance units

is strictly due to the capacitive reactance of the capacitor.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

August 2, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200136 Rev. C

DATA SHEET • SC SERIES

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided

by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and

Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and

names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are

incorporated by reference.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200136 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • August 2, 2006

SC00120912 [SKYWORKS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB