SKY73092-459LF [SKYWORKS]
Modulator;
| 型号： | SKY73092-459LF |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | Modulator 射频 微波 |
| 文件： | 总13页 (文件大小：773K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PRELIMINARY DATA SHEET
SKY73092-459LF: 400-6000 MHz Quadrature Modulator
Applications
Description
Skyworks SKY73092-459LF is an integrated quadrature
modulator for the upconversion of complex modulated
baseband/IF signals directly up to RF. The device is designed for
use in the 400 to 6000 MHz range. The high linearity, and
excellent I/Q phase accuracy and amplitude balance of the
SKY73092-459LF make it ideal for use in high performance
communication systems.
• Cellular base station systems: GSM/EDGE, CDMA2000,
W-CDMA, TD-SCDMA, LTE
• WiMAX/broadband wireless access systems
• Satellite modems
Features
The modulator accepts two differential baseband inputs and a
single-ended Local Oscillator (LO), and generates a single-ended
RF output. The baseband input buffers accept an input common-
mode voltage of 0.5 V. The LO input is broadband matched on-
chip to 50 Ω, which enables a direct connection to a 50 Ω LO
source. The RF output is a broadband, single-ended 50 Ω port,
designed for a direct connection to a 50 Ω load.
• RF frequency operation range: 400 to 6000 MHz
• Baseband common-mode voltage: 0.5 V
• Side-band suppression better than –45 dBc
• Carrier feedthrough of –40 dBm
• Noise floor of –161 dBm/Hz
Figure 1 shows a functional block diagram for the SKY73092-
459LF. The device package and pinout for the 24-pin Quad Flat
No-Lead (QFN) package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in Table
1.
• Single supply: 4.75 to 5.25 V
• QFN (24-pin, 4 x 4 mm) package (MSL3, 260 °C per JEDEC
J-STD-020)
Figure 1. SKY73092-459LF Functional Block Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
1
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Figure 2. SKY73092-459LF Pinout, 24-Pin QFN
(Top View)
Table 1. SKY73092-459LF Signal Descriptions
Pin #
Name
Description
Pin #
Name
Description
1
PDN
Power down, output disable. A logic high
disables the RF output. Connect to ground
or leave floating to enable the RF output.
13
N/C
No connection. Can be left open or tied to
ground.
2
GND
LOP
Ground
14
15
GND
N/C
Ground
3
50 Ω single-ended positive LO input. Pin
must be AC-coupled to the LO.
No connection. Can be left open or tied to
ground.
4
LON
50 Ω single-ended negative LO input. Pin
must be AC-coupled to ground.
16
RFOUT
RF output. Pin should be AC-coupled to the
load.
5
6
GND
N/C
Ground
17
18
GND
VCC
Ground
No connection. Can be left open or tied to
ground.
+5 VDC supply
7
N/C
No connection. Can be left open or tied to
ground.
19
GND
Ground
Ground
8
GND
Ground
20
21
GND
BBIP
9
BBQN
High impedance negative Q input. Should be
High impedance positive I input. Should be
externally DC-biased to 0.5 V.
externally DC-biased to 0.5 V.
10
BBQP
High impedance positive Q input. Should be
22
BBIN
High impedance negative I input. Should be
externally DC-biased to 0.5 V.
externally DC-biased to 0.5 V.
11
12
GND
GND
Ground
Ground
23
GND
VCC
Ground
24
+5 VDC supply
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Mixers
Technical Description
The SKY73092-459LF is comprised of four main functional areas:
the LO chain, the baseband input level shifters, the mixers, and
the differential to single-ended converter.
The SKY73092-459LF incorporates two Gilbert-type, double-
balanced mixers for both the In-Phase (I) and Quadrature (Q)
channels. The differential output currents are summed together
into an on-chip balun, which converts the differential signal to a
single-ended output.
LO Chain
The LO chain consists of an input linear buffer, a polyphase
quadrature phase splitter, and limiting amplifiers. The input buffer
provides an internal 50 Ω match while generating an amplified
differential signal to the polyphase splitters.
Differential to Single-Ended Converter
The differential to single-ended converter is an on-chip balun that
converts the differential mixer output signal to a single-ended
signal. The output of the balun is designed to have a broadband
50 Ω output impedance.
The LO can be driven either single-ended or differentially. For
single-ended LO signals, the LON signal (pin 4) should be AC-
grounded using a capacitor. Each quadrature LO signal is passed
through limiting amplifiers before driving the mixers.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY73092-459LF are
provided in Table 2. The recommended operating conditions are
specified in Table 3 and electrical specifications are provided in
Tables 4, 5, 6, and 7.
Baseband Input Level Shifters
The baseband inputs present a high input impedance while
providing proper DC levels for the mixer inputs. The recommended
baseband DC bias voltage is provided in Table 3.
Table 2. SKY73092-459LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Maximum
5.5
Units
V
Supply voltage, +5 V
Supply current
VCC
ICC
230
mA
dBm
°C
LO input power
PLO
TC
+6
Operating temperature
Junction temperature
Storage temperature
–40
–40
+85
TJ
+150
+125
°C
TSTG
°C
Notes: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
Nominal thermal resistance (junction to case) is 5.1 °C/W.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. The
SKY73092-459LF ESD threshold level is 2500 VDC using Human Body Model (HBM) testing. This level applies to RF signal lines
>100 MHz, analog and RF lines <100 MHz, digital lines, power supply lines, and ground pins.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
3
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Table 3. SKY73092-459LF Recommended Operating Conditions
Parameter
Supply voltage, +5 V
Symbol
Minimum
Typical
5.00
Maximum
Units
V
VCC
ICC
4.75
5.25
Supply current
200
mA
MHz
MHz
dBm
MHz
V
RF frequency
VRF
FBB
PLO
FLO
VCM
TC
400
0
6000
200
Baseband input frequency
LO input power
–6
400
0
+6
LO frequency range
Baseband input DC bias voltage
Operating case temperature
6000
0.5
–40
+85
°C
Table 4. SKY73092-459LF Electrical Characteristics: RF Output (1 of 4) (Note 1)
(VCC = 5 V, TA = 25 °C, LO Amplitude = 0 dBm, I/Q Amplitude = 600 mVpp differential, FBB = 1 MHz, Unless Otherwise Noted)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
400 MHz
RF output power
Voltage gain
POUT
–1.1
–0.7
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+7.5
–50.4
–47.2
–80.6
dBm
dBm
dBc
Sideband suppression
2nd harmonic
2fo
3fo
POUT = –1 dBm,
harmonic output @ FLO
2FBB
dBc
3rd harmonic
POUT = –1 dBm,
harmonic output @ FLO
–3FBB
–64.3
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+78.3
+24
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
–161.5
–23
dBm/Hz
dB
RF output return loss
900 MHz
RF output power
Voltage gain
POUT
+1.5
1.9
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+9.5
–41.5
–63.5
dBm
dBm
dBc
Sideband suppression
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Table 4. SKY73092-459LF Electrical Characteristics: RF Output (2 of 4) (Note 1)
(VCC = 5 V, TA = 25 °C, LO Amplitude = 0 dBm, I/Q Amplitude = 600 mVpp differential, FBB = 1 MHz, Unless Otherwise Noted)
Parameter
900 MHz (continued)
Symbol
Test Conditions
Min
Typ
Max
Units
2nd harmonic
2fo
3fo
POUT = +1.5 dBm,
harmonic output @ FLO
2FBB
–78.6
dBc
3rd harmonic
POUT = +1.5 dBm,
harmonic output @ FLO
–3FBB
–69.6
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+73.4
+25.9
–161.2
–29
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
1900 MHz
RF output power
Voltage gain
POUT
+2.4
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
2.8
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+10.4
–36.5
–59.7
–68.6
dBm
dBm
dBc
Sideband suppression
2nd harmonic
2fo
3fo
POUT = +2.4 dBm,
harmonic output @ FLO
2FBB
dBc
3rd harmonic
POUT = +2.4 dBm,
harmonic output @ FLO
–3FBB
–60
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+77.2
+26.1
–160.9
–16.7
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
2600 MHz
RF output power
Voltage gain
POUT
+2.4
2.9
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
1 dB Output Compression Point
OP1dB
+9.8
dBm
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
5
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Table 4. SKY73092-459LF Electrical Characteristics: RF Output (3 of 4) (Note 1)
(VCC = 5 V, TA = 25 °C, LO Amplitude = 0 dBm, I/Q Amplitude = 600 mVpp differential, FBB = 1 MHz, Unless Otherwise Noted)
Parameter
2600 MHz (continued)
Symbol
Test Conditions
Min
Typ
Max
Units
Carrier feedthrough
Sideband suppression
2nd harmonic
–34.1
–49.5
–63.8
dBm
dBc
dBc
2fo
3fo
POUT = +2.4 dBm,
harmonic output @ FLO
2FBB
3rd harmonic
POUT = +2.4 dBm,
harmonic output @ FLO
–3FBB
–57.1
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+68.9
+25.4
–160.4
–11.7
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
3500 MHz
RF output power
Voltage gain
POUT
+2.2
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
2.6
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+10
–32.2
–43
dBm
dBm
dBc
Sideband suppression
2nd harmonic
2fo
3fo
POUT = +2.2 dBm,
harmonic output @ FLO
2FBB
–54.8
dBc
3rd harmonic
POUT = +2.2 dBm,
harmonic output @ FLO
–3FBB
–55
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+62.3
+25.1
–160.2
–8.7
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Table 4. SKY73092-459LF Electrical Characteristics: RF Output (4 of 4) (Note 1)
(VCC = 5 V, TA = 25 °C, LO Amplitude = 0 dBm, I/Q Amplitude = 600 mVpp differential, FBB = 1 MHz, Unless Otherwise Noted)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
4800 MHz
RF output power
Voltage gain
POUT
–2.9
–2.4
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+6.7
–36.7
–34.7
–48.4
dBm
dBm
dBc
Sideband suppression
2nd harmonic
2fo
3fo
POUT = +2.9 dBm,
harmonic output @ FLO
2FBB
dBc
3rd harmonic
POUT = +2.9 dBm,
harmonic output @ FLO
–3FBB
–54.3
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+49.4
+21.5
–161.6
–8.8
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
5800 MHz
RF output power
Voltage gain
POUT
–6.6
–6.2
dBm
dB
Output rms voltage
divided by input (I or Q)
rms voltage
1 dB Output Compression Point
Carrier feedthrough
OP1dB
+2.6
–37.5
–25.3
–49.7
dBm
dBm
dBc
Sideband suppression
2nd harmonic
2fo
3fo
POUT = +6.6 dBm,
harmonic output @ FLO
2FBB
dBc
3rd harmonic
POUT = +6.6 dBm,
harmonic output @ FLO
–3FBB
–53
dBc
2nd Order Output Intercept Point
3rd Order Output Intercept Point
Noise floor
OIP2
OIP3
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
+44.4
+16.5
–161.3
–12.8
dBm
dBm
FBB = 3.5 and 4.5 MHz,
POUT = –5 dBm each tone
@ 20 MHz offset,
I/Q = 0 VDIFF
dBm/Hz
dB
RF output return loss
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
7
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Table 5. SKY73092-459LF Electrical Characteristics: LO Input (Note 1)
(VCC = 5 V, TA = 25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Conditions
Single-ended
Internal 50 Ω match
Min
Typ
0
Max
Units
dBm
dB
LO drive level
LO port return loss
–6
+6
–10
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Table 6. SKY73092-459LF Electrical Characteristics: Baseband Input (Note 1)
(VCC = 5 V, TA = 25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Baseband input DC bias common mode
voltage
VCM
0.5
V
I/Q input amplitude
peak-to-peak differential
0.6
5.9
V
I/Q differential input resistance
I/Q differential input capacitance
I/Q input bandwidth
kΩ
pF
*** TBD ***
210
50 Ω source @ 1 dB
MHz
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Table 7. SKY73092-459LF Electrical Characteristics: PDN Input (Note 1)
(VCC = 5 V, TA = 25 °C, Unless Otherwise Noted)
Parameter
Symbol
Test Conditions
Min
Typ
Max
Units
Off isolation
LO leakage
POUT (PDN high) to POUT
(PDN low)
100
dB
PDN high, LO = 1 GHz
–70
dBm
Settling time:
turn on
PDN high to low (90% of
envelope)
250
400
ns
turn off
PDN low to high (10% of
envelope)
ns
V
PDN high level (logic 1)
PDN low level (logic 0)
2.8
2.8
V
Note 1: Performance is guaranteed only under the conditions listed in this Table.
3. Components C109 and C123 are bypass capacitors and
should be placed as close as possible to pin 24 (VCC).
Evaluation Board Description
The SKY73092-459LF Evaluation Board is used to test the
performance of the SKY73092-459LF quadrature modulator. An
assembly drawing for the Evaluation Board is shown in Figure 3
and the layer detail is provided in Figure 4. An Evaluation Board
schematic diagram is provided in Figure 5.
Package Dimensions
Package dimensions for the 24-pin QFN are shown in Figure 6,
and tape and reel dimensions are provided in Figure 7.
Circuit Design Configurations
The following design considerations are critical and must be
followed regardless of final use or configuration:
1. Component C106 is an AC ground and should be placed as
close as possible to pin 4 (LON) of the device.
2. Components C108 and C121 are bypass capacitors and
should be placed as close as possible to pin 18 (VCC).
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
The SKY73092-459LF is rated to Moisture Sensitivity Level 3
(MSL3) at 260 °C. It can be used for lead or lead-free soldering.
Package and Handling Information
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Figure 3. SKY73092-459LF Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
9
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Figure 4. SKY73092-459LF Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
11
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Figure 6. SKY73092-459LF 24-Pin QFN Package Dimensions
Figure 7. SKY73092-459LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
July 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201375B
PRELIMINARY DATA SHEET • SKY73092-459LF QUADRATURE MODULATOR
Ordering Information
Model Name
Manufacturing Part Number
SKY73092-459LF
Evaluation Board Part Number
TW18-D605-001
SKY73092-459LF 400-6000 MHz Quadrature Modulator
Copyright © 2010, 2011 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201375B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • July 25, 2011
13
相关型号：
SKY73120-11
Voltage Controlled Oscillator, 890MHz Min, 960MHz Max, ROHS COMPLIANT PACKAGE-28
SKYWORKS
©2020 ICPDF网 联系我们和版权申明