SKYA21012 [SKYWORKS]
SPDT,;型号: | SKYA21012 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | SPDT, 射频 微波 光电二极管 |
文件: | 总10页 (文件大小:860K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
SKYA21012: 20 MHz to 6.0 GHz GaAs SPDT Switch
Automotive Applications
Infotainment
INPUT
Automated toll systems
Garage door opener
802.11 b/g/n WLAN, Bluetooth® systems
Wireless control systems
Outdoor lighting control
Remote keyless entry
Telematics
OUTPUT2
OUTPUT1
203021-001
VCTL1
VCTL2
GPS/Navigation
Figure 1. SKYA21012 Block Diagram
Features
Description
Positive voltage control (0 and 1.8 V to 0 and 5.0 V)
Broadband frequency range: 20 MHz to 6.0 GHz
Very low insertion loss, 0.35 dB typical @ 2.45 GHz
High isolation, 24 dB typical @ 2.45 GHz
The SKYA21012 is a pHEMT GaAs FET I/C switch. The switch may
be used in transmit/receive applications by connecting the RF
common port (INPUT, pin 5) to either the OUTPUT1 or OUTPUT2
port (pin 1 or 3, respectively) using a low loss path (i.e., a positive
voltage applied to either VCTL1 or VCTL2 pins). The switch is
“reflective short” on the isolated port.
Excellent linearity performance, IP0.5 dB = +30 dBm
Ultraminiature, MLPD (6-pin, 1 x 1 mm) package
Designed and manufactured in an ISO/TS16949-certified facility
JEDEC (JESD22) qualified at 25 °C
The switch is manufactured in a compact, 1 x 1 mm, 6-pin
exposed pad plastic Micro Leadframe Package Dual (MLPD)
package.
Lead (Pb)-free and RoHS-compliant
(MSL1 @ 260 °C per JEDEC J-STD-020)
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
OUTPUT1
GND
1
6
VCTL1
INPUT
VCTL2
2
3
5
4
OUTPUT2
S1482
Figure 2. SKYA21012 Pinout
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203021C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 7, 2017
1
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
Table 1. SKYA21012 Signal Descriptions
Pin
1
Name
OUTPUT1
Description
RF port. Must be DC blocked.
Ground
Pin
4
Name
Description
DC control voltage
VCTL2
INPUT
VCTL1
2
GND
5
RF port. Must be DC blocked.
DC control voltage
3
OUTPUT2
RF port. Must be DC blocked.
6
Table 2. SKYA21012 Absolute Maximum Ratings1
Parameter
Symbol
Minimum
Maximum
Units
Input power
PIN
>500 MHz, 5 V, CW
>500 MHz, 2.7 V, CW
802.11g, 54 Mbps, 64 QAM, 2.4-2.5 GHz
802.11g, 54 Mbps, 64 QAM, 5.2-5.8 GHz
+32
+31
+26
+25
dBm
dBm
dBm
dBm
Storage temperature
TSTG
TOP
–65
–40
+150
+85
C
C
Operating temperature
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters
set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
ESD HANDLING:Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 3. SKYA21012 Recommended Operating Conditions
Parameter
Symbol
Min
Typ
Max
Units
Frequency
f
0.02
6.0
GHz
Control voltage:
low
high
VCTL_L
VCTL_H
0
1.8
0.2
5.0
V
V
Operating temperature
TOP
+25
C
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKYA21012 are provided in
Table 2. The recommended operating conditions are specified in
Table 3 and electrical specifications are provided in Table 4.
Typical performance characteristics of the SKYA21012 are
illustrated in Figures 3 through 9.
The state of the SKYA21012 is determined by the logic provided
in Table 5.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 7, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203021C
2
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
Table 4. SKYA21012 Electrical Specifications1
(VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
Units
Frequency
f
0.02
6.0
GHz
Insertion loss
IL
0.02-3.0 GHz
3.0-6.0 GHz
0.35
0.50
0.50
0.65
dB
dB
Isolation
Iso
0.02-3.0 GHz
3.0-6.0 GHz
22
22
24
26
dB
dB
Return loss (insertion loss state)
0.02-3.0 GHz
3.0-6.0 GHz
25
15
dB
dB
Switching characteristics:
Rise/fall time
On/off time
10/90% or 90/10% RF
50% VCTL to 90/10% RF
40
100
ns
ns
Video feed-through
25
mV
0.5 dB input compression point
IP0.5dB
VCTL = 0 and 1.8 V
@ 2.45 GHz
+21
+29
+22
+30
+26
dBm
dBm
dBm
VCTL = 0 and 2.7 V
@ 2.45 GHz
VCTL = 0 and 2.7 V
@ 48 MHz
Input IP3
IIP3
PIN = +20 dBm/tone
VCTL = 0 and 1.8 V
@ 2.45 GHz
+30
+46
+32
dBm
VCTL = 0 and 2.7 V
@ 2.45 GHz
+50
+30
+46
dBm
dBm
dBm
VCTL = 1.8 V @ 5.8 GHz
VCTL = 2.7 V @ 5.8 GHz
Error vector magnitude
EVM
802.11a, 54 Mbps,
PIN = <+24 dBm,
VCTL = 2.7 V
2.5
2.5
2.7
%
%
802.11g, 54 Mbps,
PIN = <+25.5 dBm,
VCTL = 2.7 V
Control voltage:
Low
High
VCTL_L
VCTL_H
0
1.8
0.2
5.0
V
V
Supply current
ICC
VCTL_L = 0 V
VCTL_H = 5 V
5
5
μA
μA
1
Performance is guaranteed only under the conditions listed in this Table.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203021C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 7, 2017
3
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
Typical Performance Characteristics
(VCTL = 0 V and +2.7 V, TOP = +25 C, PIN = 0 dBm, Characteristic Impedance [Zo] = 50 Ω, Blocking Capacitors = 100 pF,
Bypass Capacitors = 33 pF, Unless Otherwise Noted)
0
0
–5
Input-Output 1
Input-Output 2
–0.1
Input-Output 1
Input-Output 2
–0.2
–10
–15
–20
–0.3
–0.4
–0.5
–0.6
–0.7
–25
–30
–35
–0.8
–0.9
–1.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Frequency (GHz)
Frequency (GHz)
Figure 3. Typical Insertion Loss
Figure 4. Typical Isolation
0
Input-Output 1
Input-Output 2
–5
–10
–15
–20
+0.1
0
–0.1
–0.2
–0.3
–0.4
–0.5
–0.6
–0.7
–0.8
–0.9
–1.0
–25
–30
–35
–40
1.8 V
2.7 V
3.0 V
3.3 V
4.0 V
5.0 V
–45
–50
+10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +34
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
Input Power (dBm)
Frequency (GHz)
Figure 6. Compression vs Control Voltage
(2450 MHz)
Figure 5. Typical Return Loss
3.0
+0.1
0
2.7 V
3.0 V
3.3 V
4.0 V
5.0 V
2.5
2.0
1.5
–0.1
–0.2
–0.3
–0.4
–0.5
–0.6
–0.7
–0.8
–0.9
–1.0
1.0
0.5
0
1.8 V
2.7 V
3.0 V
3.3 V
4.0 V
5.0 V
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
+10 +12 +14 +16 +18 +20 +22 +24 +26 +28 +30 +32 +34
Input Power (dBm)
Output Power (dBm)
Figure 7. Compression vs Control Voltage
(5.2 to 5.8 GHz)
Figure 8. 802.11g EVM vs Output Power @ 2.45 GHz, 54 Mbps
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 7, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203021C
4
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
3.0
2.5
2.0
1.5
1.0
2.7 V
3.0 V
3.3 V
4.0 V
5.0 V
0.5
0
+18
+19
+20
+21
+22
+23
+24
+25
+26
+27
Output Power (dBm)
Figure 9. 802.11a EVM vs Output Power, 5.2 to 5.8 GHz, 54 Mbps
Table 5. SKYA21012 Truth Table1
VCTL1 (Pin 6)
VCTL2 (Pin 4)
INPUT to OUTPUT1 Path
Isolation
Insertion loss
INPUT to OUTPUT2 Path
Insertion loss
Isolation
1
0
1
0
1
“1” = +1.8 V to +5 V. “0” = 0 V to +0.2 V.
Any state other than described in this Table places the switch into an undefined state.
An undefined state will not damage the device.
Evaluation Board Description
Package and Handling Information
The SKYA21012 Evaluation Board is used to test the performance
of the SKYA21012 SPDT Switch. An Evaluation Board schematic
diagram is provided in Figure 10. An assembly drawing for the
Evaluation Board is shown in Figure 11.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SKYA21012 is rated to Moisture Sensitivity Level 1 (MSL1) at
260 C. It can be used for lead or lead-free soldering. For
additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Package Dimensions
The PCB layout footprint for the SKYA21012 is provided in
Figure 12. Typical part markings are shown in Figure 13. Package
dimensions are shown in Figure 14, and tape and reel dimensions
are provided in Figure 15.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203021C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 7, 2017
5
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
C4
C1
OUTPUT1
VCTL1
INPUT
C5
C3
VCTL2
OUTPUT2
C6
C1, C3, and C5 are DC blocking capacitors (100 pF)
C4 and C6 are bypass capacitors (33 pF)
Use 10 nF DC blocking capacitors (C1, C3, and C5)
for <50 MHz operation.
S1496
Figure 10. SKYA21012 Evaluation Board Schematic
OUTPUT1
INPUT
OUTPUT2
C1, C3, C5 = BLocking Capacitors (100 pF)
C4 and C6 = Bypass Capacitors (33 pF)
S1483
Figure 11. SKYA21012 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 7, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203021C
6
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
8X 0.65
0.21
0.13
5X 0.33
Pin 1
7X 0.15
0.35
Pitch
Part Outline
R0.075 Typ
0.10
Exposed Soldering
Area
All measurements in millimeters
S1484
Figure 12. SKYA21012 PCB Layout Footprint
(Top View)
Pin 1
Indicator
Skyworks Part #
Figure 13. Typical Part Markings
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203021C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 7, 2017
7
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
Seating Plane
C
0.50/0.41
R0.075 Typ
Pin 1
A
0.13 0.1
1
0.05/0.00
B
Pin 1
Indicator
3X 0.15 0.05
0.1 0.1
0.2 0.1
0.33 0.1
1
0.35
Pitch
0.05 C
2X
3
6X
See Detail A
Exposed Pad
0.1 0.1
C
0.10
0.08 C
0.05 C
2X
0.21 0.1
Top View
Side View
Bottom View
0.175 0.075
R(0.075)
0.15 0.05
0.10 M C A B
Detail A
(5X)
All measurements are in millimeters.
Dimensioning and tolerancing according to ASME Y14.5M-1994.
S1485
Figure 14. SKYA21012 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
September 7, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203021C
8
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
203021-015
Figure 15. SKYA21012 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
203021C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 7, 2017
9
DATA SHEET • SKYA21012: 20 MHz TO 6.0 GHz GaAS SPDT SWITCH
Ordering Information
Model Name
Manufacturing Part Number
Evaluation Board Part Number
SKYA21012-EVB
SKYA21012: SPDT Switch
SKYA21012
Copyright © 2013, 2017 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
September 7, 2017 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 203021C
相关型号:
SKYA22000
Power Amplifier Module for Automotive Applications â Quad-Band GSM / GPRS / EDGE
SKYWORKS
SKYA22000EK1
Power Amplifier Module for Automotive Applications â Quad-Band GSM / GPRS / EDGE
SKYWORKS
SKYA22001
SkyBlue⢠Power Amplifier Module for Automotive Applications â LTE Bands 11, 21
SKYWORKS
SKYA22001EK1
SkyBlue⢠Power Amplifier Module for Automotive Applications â LTE Bands 11, 21
SKYWORKS
©2020 ICPDF网 联系我们和版权申明