SMV1206-079LF [SKYWORKS]
Variable Capacitance Diode, 11.6pF C(T), 22V, Silicon, Hyperabrupt, SC-79, 2 PIN;
| 型号： | SMV1206-079LF |
| 厂家： | 
SKYWORKS SOLUTIONS INC. |
| 描述： | Variable Capacitance Diode, 11.6pF C(T), 22V, Silicon, Hyperabrupt, SC-79, 2 PIN 光电二极管 变容二极管 |
| 文件： | 总6页 (文件大小：412K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
SMV1206-079LF Hyperabrupt Junction Tuning Varactor
Applications
Wideband RF and microwave VCOs
Features
High tuning ratio
Low series resistance
Designed for high volume, low-cost applications
Ultra-small SC-79 package
(MSL1, 260 °C per JEDEC J-STD-020)
Description
The SMV1206-079LF is a surface mount varactor diode designed
for very low series resistance applications such as RF and
microwave VCOs.
Skyworks GreenTM products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of GreenTM, document number
SQ04–0074.
The SC-79 packaging option is defined in Table 1. The absolute
maximum ratings of the SMV1206-079LF varactor are provided in
Table 2. Electrical specifications are specified in Table 3. Figure 1
shows the typical performance of capacitance versus reverse
voltage. The SPICE model for the SMV1206-079LF is shown in
Figure 2 and the associated model parameters are provided in
Table 4. The relationship between voltage and capacitance for the
SMV1206-079LF is shown in Table 5.
Table 1. Packaging and Marking
Single
SC-79
Green™
SMV1206-079LF
Marking: Cathode and KC
LS = 0.7 nH
The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-
compliant package unless otherwise noted as Green™. Tin/lead (Sn/Pb)
packaging is not recommended for new designs.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201471B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 6, 2015
1
DATA SHEET • SMV1206-079LF HYPERABRUPT JUNCTION TUNING VARACTOR
Table 2. SMV1206-079LF Absolute Maximum Ratings
Parameter
Power dissipation
Symbol
Minimum
Typical
Maximum
250
Units
mW
mA
C
PDIS
IF
Forward current
20
Operating temperature
Storage temperature
TOP
TSTG
ESD
–55
–55
+125
+150
C
Electrostatic discharge:
Human Body Model (HBM), Class 0
< 250
V
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SMV1206-079LF Electrical Specifications (Note 1)
(TOP = 25 C, Unless Otherwise Noted)
Parameter
Reverse leakage current
Symbol
Test Condition
VR = 17.6 V
Min
Typical
Max
Units
nA
IR
50
Reverse breakdown voltage
Capacitance
VBR
CT
IR = 10 μA
22
V
VR = 3 V, f = 1 MHz
VR = 20 V, f = 1 MHz
10.6
2.15
12.6
2.60
pF
pF
Capacitance ratio
Quality factor
CTR
CT (3 V)/CT (20 V)
4.45
–
–
Q
VR = 3 V, f = 50 MHz
400
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Typical Performance Characteristics
30
25
20
15
10
5
0
0
5
10
15
20
Reverse Voltage (V)
Figure 1. Capacitance vs Reverse Voltage @ 25 °C
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201471B
2
DATA SHEET • SMV1206-079LF HYPERABRUPT JUNCTION TUNING VARACTOR
PORT
P_anode
port = 1
IND
LS
L = LS
DIODEM
Diode_Model
IS = 1.00e-14
RS = 0
FC = 0.5
BV = 0
IBV = 1e-3
SR = 0
I
N = 1
TT = 0
NR = 2
IKF = 0
RES
RS
R = RS
CJO = CJO
N
BV = 1
BVL = 0
BVL = 1
CAP
CP
C = CP
M = M
VJ = VJ
I
N
EG = 1.11
XTI = 3
KF =0
AF =1
TBV1 = 0
TNOM = 27
FFE = 1
DIODE
Varactor_Diode
AREA = 1
MODEL = Diode_Model
MODE = nonlinear
PORT
P_Cathode
port = 2
Figure 2. SPICE Model
Table 4. SPICE Model Parameters
CJO
VJ
CP
RS
LS
Part Number
(pF)
(V)
M
(pF)
(Ω)
(nH)
SMV1206-079LF
26.5
1.1
0.85
0.25
0.63
0.7
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201471B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 6, 2015
3
DATA SHEET • SMV1206-079LF HYPERABRUPT JUNCTION TUNING VARACTOR
Table 5. Capacitance vs Reverse Voltage
Voltage (VR)
(V)
Typical Capacitance (CT)
(pF)
0
25.84
17.53
13.89
11.55
9.78
8.28
6.95
5.83
5.00
4.40
3.96
3.37
2.98
2.71
2.50
2.34
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
12.0
14.0
16.0
18.0
20.0
For additional information, refer to the Skyworks Application Note,
Solder Reflow Information, document number 200164.
Package and Handling Information
Package dimensions for the SC-79 are shown in Figure 3, and
tape and reel dimensions are provided in Figure 4.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMV1206-079LF is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. It can be used for lead or lead-free soldering.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201471B
4
DATA SHEET • SMV1206-079LF HYPERABRUPT JUNCTION TUNING VARACTOR
Box
or
Bar
Polarity
Indicator Area
(Note 2)
0.006 (0.15 mm) Min.
0.028
(0.70 mm) Min.
0.035
(0.90 mm) Max.
0.010
(0.25 mm) Min.
0.014
1
2
(0.35 mm) Max.
0.060 (1.50 mm) Min.
0.067 (1.70 mm) Max.
0.043 (1.10 mm) Min.
0.051 (1.30 mm) Max.
0.020
(0.50 mm) Min.
0.028
10° Max.
0.003
(0.07 mm) Min.
0.008
(0.70 mm) Max.
(0.20 mm) Max.
10° Max.
Notes:
1. Dimensions are in inches (millimeters shown in parentheses).
2. Cathode indicator for SMS7621-079LF
Anode indicator for SMS7630-079LF
S1652a
Figure 3. SMV1206-079LF SC-79 Package Dimensions
∅1.50 0.10
Cathode Indicator
4.00 0.10
(Note 7)
2.00 0.05
A
1.75 0.10
A
∅0.50 0.05
B
B
0.45 0.05
0.19
Anode Indicator
(Note 8)
0.90 0.05
1.94 0.05
B
Notes:
1. Carrier tape: black conductive polycarbonate.
2. Cover tape: transparent conductive material.
3. Cover tape size: 5.4 mm width.
0.73 0.05
4. ESD surface resistivity is ≥1 x 104 ~ ≤ 1 x 108 Ohms/square.
5. All measurements are in millimeters.
6. Standard reel size is 7 inches. Standard reel quantity is 3000 pcs.
7. Cathode indicator for all devices except for the SMS7630-079LF.
8. Anode indicator for the SMS7630-079LF only.
A
S2188
Figure 4. SMV1206-079LF Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201471B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 6, 2015
5
DATA SHEET • SMV1206-079LF HYPERABRUPT JUNCTION TUNING VARACTOR
Ordering Information
Model Name
Manufacturing Part Number
SMV1206-079LF Hyperabrupt Junction Tuning Varactors
SMV1206-079LF
Copyright © 2011, 2015 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for
identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by
reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
August 6, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201471B
相关型号：
SMV1206-107
Variable Capacitance Diode, X Band, 11.5pF C(T), 20V, Silicon, Hyperabrupt, 1.83 X 1.43 MM, 1 MM HEIGHT, GREEN, HERMETIC SEALED, CERAMIC PACKAGE-2
SKYWORKS
SMV1206-108
Variable Capacitance Diode, X Band, 11.6pF C(T), 20V, Silicon, Hyperabrupt, 1.83 X 1.43 MM, 1 MM HEIGHT, GREEN, HERMETIC SEALED, CERAMIC PACKAGE-2
SKYWORKS
©2020 ICPDF网 联系我们和版权申明