SMV1413-240 [SKYWORKS]
Variable Capacitance Diode, S Band, 9.24pF C(T), 30V, Silicon, Abrupt, ROHS COMPLIANT, HERMETIC SEALED PACKAGE-2;型号: | SMV1413-240 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | Variable Capacitance Diode, S Band, 9.24pF C(T), 30V, Silicon, Abrupt, ROHS COMPLIANT, HERMETIC SEALED PACKAGE-2 二极管 变容二极管 |
文件: | 总8页 (文件大小:393K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
SMV1405-SMV1413 Series: Silicon Abrupt Junction
Varactors, Packaged and Bondable Chips
Applications
• VCO applications up to 18 GHz
• Voltage tuned filters
• Voltage variable phase shifters
Features
• High Q
• Low series resistance for low phase noise
• Multiple chip and hermetic packages
• Packages rated MSL1, 260 °C per JEDEC J-STD-020
Description
The SMV1405-SMV1413 group of silicon abrupt junction varactor
diodes is designed for use in Voltage Controlled Oscillators (VCOs)
requiring tight capacitance tolerances. The low resistance of these
varactors makes them appropriate for high-Q resonators in
wireless system VCOs to frequencies up to 18 GHz. This family of
varactors is characterized for capacitance over temperature.
Table 1 lists the various packages and part numbers of the
SMV1405-SMV1413 group of varactors.
Table 1. Hermetic Packaged Abrupt Junction Tuning Varactor Chips
Hermetic Stripline
240
Hermetic Pill
203
Stripline
219
Coaxial
210
SMV1405-240
SMV1408-240
SMV1413-240
LS = 0.55 nH
SMV1405-203
SMV1408-203
SMV1413-203
LS = 0.40 nH
SMV1405-219
SMV1408-219
SMV1413-219
LS = 0.50 nH
SMV1405-210
SMV1408-210
SMV1413-210
LS = 0.45 nH
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200865C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 25, 2011
1
DATA SHEET • SMV1405-SMV1413 VARACTORS
Table 2. SMV1405-SMV1413 Series Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
30
Units
V
Reverse voltage
Forward current
VR
IF
20
mA
mW
°C
Power dissipation
PD
250
Operating temperature
Storage temperature
TOP
TSTG
–55
–55
+125
+150
°C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although these devices are designed to be as robust as possible, Electrostatic Discharge (ESD) can damage them. These
devices must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the
human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all
times. The SMV1405-SMV1413 group of varactors are Class 0 Human Body Model (HBM) ESD devices.
Table 3. SMV1405-SMV1413 Series Electrical Specifications (Note 1)
(TOP = 25 °C, Unless Otherwise Noted)
Min.
Max.
RS @ 4 V,
500 MHz
(Ω)
Min. VB,
IR @ 10 μA
(V)
Typ.
Q @ 4 V,
50 MHz
CT @ 4 V
(pF)
CT @ 0 V
CT @ 30 V
(Ratio)
Part Number
Die Drawing
SMV1405
30
30
30
1.08 to 1.32
1.62 to 1.98
3.59 to 4.29
4.1
4.1
4.2
0.80
0.60
0.35
3200
2900
2400
150-813
150-813
150-813
SMV1408
SMV1413
Note 1: Performance is guaranteed only under the conditions listed in this Table.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMV1405-SMV1413
varactors are provided in Table 2. Electrical specifications are
provided in Table 3. Typical capacitance values are listed in
Table 4. Typical performance characteristics of the SMV1405-
SMV1413 varactors are illustrated in Figures 1 and 2.
The SMV1405- SMV1413 series of varactors are rated to Moisture
Sensitivity Level 1 (MSL1) at 260 °C. They can be used for lead or
lead-free soldering. For additional information, refer to the
Skyworks Application Note, Solder Reflow Information, document
number 200164.
The SPICE model for the SMV1405- SMV1413 varactors is shown
in Figure 3 and the associated model parameters are provided in
Table 5.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Package dimensions are shown in Figures 4 to 8. The SMV1405-
SMV1413 series of varactors are not delivered on carrier tapes.
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
May 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200865C
DATA SHEET • SMV1405-SMV1413 VARACTORS
Table 4. Capacitance vs Reverse Voltage
VR
(V)
CT (pF)
SMV1408
4.08
SMV1405
2.67
2.12
1.84
1.70
1.55
1.44
1.34
1.25
1.17
0.95
0.77
0.63
SMV1413
9.24
7.39
6.37
5.71
5.22
4.85
4.55
4.10
3.77
2.85
2.12
1.77
0
0.5
1.0
1.5
2.0
2.5
3.0
4.0
5.0
10.0
20.0
30.0
3.36
2.94
2.60
2.38
2.24
2.08
1.88
1.72
1.28
1.01
0.95
Typical Performance Characteristics
Figure 1. Capacitance vs Reverse Voltage
Figure 2. Relative Capacitance Change vs Temperature
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200865C • Skyworks Proprietary information • Products and Product Information are Subject to Change Without Notice • May 25, 2011
3
DATA SHEET • SMV1405-SMV1413 VARACTORS
Figure 3. SPICE Model
Table 5. SPICE Model Parameters
CJO
(pF)
VJ
(V)
CP
(pF)
RS
(Ω)
Part Number
M
SMV1405
SMV1408
SMV1413
2.37
3.89
8.92
0.77
0.92
0.87
0.5
0.5
0.5
0.29
0.21
0.30
0.80
0.60
0.35
Values extracted from measured performance.
For package inductance ,LS, refer to Table 1.
For more details, refer to the Skyworks Application Note, Varactor SPICE Model for Approved RF VCO Applications, document number 200315.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
May 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200865C
DATA SHEET • SMV1405-SMV1413 VARACTORS
Figure 4. 150-813 Die Dimensions
Figure 5. -240 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200865C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 25, 2011
5
DATA SHEET • SMV1405-SMV1413 VARACTORS
Figure 6. -203 Package Dimensions
Figure 7. -210 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
May 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200865C
DATA SHEET • SMV1405-SMV1413 VARACTORS
Figure 8. -219 Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200865C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • May 25, 2011
7
DATA SHEET • SMV1405-SMV1413 VARACTORS
Copyright © 2002-2011 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of
Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
May 25, 2011 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200865C
相关型号:
©2020 ICPDF网 联系我们和版权申明